Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation over areas n exc 1.5 m in depth and getting out hard and dense soil complete all as specifed and as directed. |
| 2 | Excavation over areasexc 1.5 m but n exc 3.0 m in depth and getting out hard and dense soil complete all as specifed and as directed. |
| 3 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in all kinds of soil complete all as specifed and as directed. |
| 4 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying ofunderground cable and getting out in any type of soil complete all as directed by the Engineer-in-Charge |
| 5 | Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) means upto 1.50 m depthover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge |
| 6 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specifed and as directed. |
| 7 | M & L for Broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage well complete all as specifed and as directed. |
| 8 | M & L for PCC ( 1:2:4) type B-1, using 20mm graded stone aggregate in cement concrete in surface channels and drains complete all as specifed and as directed. |
| 9 | M&L PCC ( 1:4:8) D-2, using 40mm graded stone aggregate in fdn.,filling and mass concrete complete all as specifed and as directed. |
| 10 | M & L for providing cement concrete Type C1 (1:3:6) 20 mm graded in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, filling hollow of frame with plain cement concrete complete all as specifed and as directed. |
| 11 | M & L Precast cement concrete block masonry with solid blocks PCC Type C1 (1:3:6) (using 20mm graded aggregate) exc 10cm in width and setting in cement mortar 1:6 complete all as specifed and as directed. |
| 12 | M & L for providing precast cement set in cement mortar 1:6 type B1 1:2:4 concrete in but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specifed and as directed. |
| 13 | M & L for RCC M-25 (20 mm graded aggregate)slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specifed and as directed. |
| 14 | Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed. concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 15 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding6m mean radius, built in cement mortar (1:6) complete all as specifed and as directed. |
| 16 | M & L for Brickwork with old size sub class B bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:4 complete all as specifed and as directed. |
| 17 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed. |
| 18 | M & L for Brickwork, with subclass ‘B’ bricks in one and half brick thick honey comb work, built in 1:4 complete all as specifed and as directed. |
| 19 | M & L for Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4)cutting not exceeding 10cm girth in Stone, concrete block or slab walls, complete all as specified and directed. |
| 20 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 21 | Formwork rough finished flat surface of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifed and as directed. |
| 22 | M&L second class hard wood as in scantling clean sawn as in floor/ roof/ truss/ purlin & similar work of any description in framed work complete all as specified and directed. |
| 23 | M & L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specifed and as directed. |
| 24 | S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, and making good with existing surface complete all as specified and directed. |
| 25 | S&F 35 mm thick Glazed and skeleton shutters 2nd class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specifed and as directed. |
| 26 | S & F 30 mm thickSecond class hard wood Glazed and skeleton window , ventilaorsshutters, open rebated and prepared to receiveglass, gauze without sash bars, edges of framing plain fitted with cut and mitred beadsforsecuring wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkats, complete as specified and directed. |
| 27 | S & F Plain, framed, panelled shutters 35 mm thick in 2nd class hard wood (any number ofpanels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specifed and as directed. |
| 28 | S & F Factory made 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specifed and as directed. |
| 29 | Taking down chowkhats or frames area n. exc 1.5 Sqm each with shutter (without taking off shutter from frame) as directed. |
| 30 | Taking down chowkhats or frames area exc 1.5 Sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) as directed. |
| 31 | Refixing of Shutters after necessary repairs, of any description exc 1 sqm and n exc 2 sqm in same opening , complete as specified and directed. |
| 32 | S&F factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising ofPVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specifed and as directed.. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 33 | S&F factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thickcomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge.(Note:- stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 34 | S & F 150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. . |
| 35 | S & F 100mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. . |
| 36 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete. |
| 37 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete. |
| 38 | S & F 300 mm long (Length of bolt) mild steel sliding door bolts plate type stove enamelled blackwith bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts four on bolt plate and two on staple plate complete all specified and directed. |
| 39 | S & F butt hinges, medium weight, stainless steel and fixed, size of hinges 75mm complete all as specified and directed. |
| 40 | S & F butt hinges, medium weight, stainless steel and fixed, size of hinges 100mm complete all as specified and directed. |
| 41 | S & F 150mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed. |
| 42 | S & F 100mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed. |
| 43 | S&F Anodised aluminium alloy handles cast type, each 150mm long complete all as specifed and as directed. |
| 44 | S&F Anodised aluminium alloy handles cast type, each 125mm long complete all as specifed and as directed. |
| 45 | S&F in repairs of20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specifed and as directed. |
| 46 | S&F in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long complete all as directed. |
| 47 | S & F in repairs,Aluminum die cast body door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifed and as directed. |
| 48 | S&F in repair, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed. |
| 49 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and as directed. |
| 50 | M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde- E- 250) quality- A complete all as specifed and as directed. |
| 51 | S & F Welded steel wire fabric 50 x 50mm, supplied and fixed complete to wood or steel members n. exc 4 Kg per sqm complete all as specifed and as directed. |
| 52 | S&F Pressed steel door frame for doors made out of 1.2 mm thick sheet with one or more rebates including necessary fixing lugs , hinges ,lock strike plate , etc size 125 x 60 mm, complete all as specified and directed. |
| 53 | M&L for Powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 54 | S & F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specifed and as directed. |
| 55 | S & F Aluminium window and ventilator shutters with powder coating of any colour (Thickness or powder coatingnot less than 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified etc. complete all as specified |
| 56 | S & F for powder coated GI Everest ceiling grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the Main Tee 28x24x3mm thick, Cross Tee 28x24x3mm thick and Wall angle 24x24x3mm thick sections complete all as specified and directed. |
| 57 | S & F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275) complete all as specifed and as directed. |
| 58 | S&F Pre-painted galvalume aluminium zine coating GI based corrugated steel sheeting 0.50mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws, all as specified and directed. |
| 59 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in cladding to wall, fixed with self tapping screws as specified . |
| 60 | S & F 4 mm thick Everest designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595x595 mm size fixed with staples on snap grid as in ceilingwith and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed |
| 61 | M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed in repairs, complete all as specified and directed. |
| 62 | M & L Machine cut Kota stone slab flooring 20-25mm thick over and including cement screed base 20mm thick in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 63 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ith grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 64 | M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement Complete all as specified and directed. |
| 65 | M&L for 150mm thick plan cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base to flooring (in two layers with each layer of 75mm thick), complete all as specified & directed by Engr-in-charge. |
| 66 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed. |
| 67 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting& Vertical Tiles complete all as specifed and as directed. |
| 68 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement complete all as specified and directed. |
| 69 | M & L 15mm thick screed bed in cement mortar 1:6 under floor tiles, complete all as specified and directed |
| 70 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a distance not exc 250m complete all as specifed and as directed. |
| 71 | M&L for preparing newly plastered wall surfaces andapplying two coat of distemper oil emulsion over 1mm thick wall care putty, complete all as specified and directed. |
| 72 | M&L for preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed. |
| 73 | M&L for preparing of old plastered ceiling surfaces and applying two coat of white wash complete all as specified and directed. |
| 74 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specifed and as directed. |
| 75 | S & F 5.50mm thickSheet glass plain, ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane with hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsall as specified and as directed. |
| 76 | S & F 5.50mm thickSheet glass black colour, ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specifed and as directed. |
| 77 | S & F Figured glass, 3mm thk pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specifed and as directed. |
| 78 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed. |
| 79 | M & L for painting tonew wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specifed and as directed. |
| 80 | M&L forpreparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 81 | M&L forPreparation of new steel surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of red oxide primer etc,complete all as spd and directed. |
| 82 | M&L forPreparation of old painted steel surfaces of any description over 10cm width or girth and appllying one coats of synthetic enamel paint, complete all as spd and directed. |
| 83 | S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows, reducers, union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed. |
| 84 | S&F GI water tubing of 20 mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows, reducers, union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed. |
| 85 | Taking up or down 15 mm bore steel tubing and connections, complete all as specified and directed |
| 86 | Taking up or down 20 mm bore steel tubing and connections, complete all as specified and directed |
| 87 | S&F in repair, 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with20mm bore dia ball vallves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ballscrewed for iron pipe and fixed, (Minimum weight 15mm-142gms /20 mm- 210 gms/ 25mm-455gms/ 40mm - 690 gms) , all as specified in SSR Part-I, complete including dismantling of existing tank. |
| 88 | S & F in repair Bib tap 15mmcast copper alloy, bright, crutch or butter fly handle screwed down, fancy type chromium plated for iron pipes complete all as specified and directed. |
| 89 | S & F in repairs 15 mm bore Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 90 | S & F in repair 15mm stop valve / angle valve, cast copper alloy screwed down high pressure with crutch or butter fly handle of fancy type chromium plated screwed both ends of,complete all as specified and directed. |
| 91 | S&F in repairs Gun Metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as directed. |
| 92 | S&F in repair, PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as directed. |
| 93 | S & F 75mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor, in repairs complete all as specifed and as directed. |
| 94 | S & F 110mm bore PVC (SWR) soil, waste & vent pipe single socketed in any length with runbber ring joints & fixed to walls or in floor, in repairs complete all as specifed and as directed. |
| 95 | S & F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 96 | S & F PVC (SWR)branch Piece single ( DobleY ) equal or unequal Dia 110mm complete all as specified and directed. |
| 97 | S & F 110mm dia PVCcowls complete all as specifed and as directed. |
| 98 | S&F in repairs cast iron nahani trap with CP grating including jointing to waste pipe in cement mortar, diameter of out let 75mm bore fixed in cement concrete type B1 (1:2:4) complete all as directed. |
| 99 | S & F PVC (SWR)Floor trap75mm with grating including jointing with solvant cementcomplete all as specified and directed. |
| 100 | S & F PVC (SWR)multi floor trap75mm with grating including jointing with solvant cementcomplete all as specified and directed. |
| 101 | M & L PCC type C2 1:3:6 using Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in, all as specified and directed. |
| 102 | S&F in repairs vitreous China squatting pan, \"Orrissa\" pattern, size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in cement concrete bedding1:2:4, Type B-1, using 20 mm graded crushed stone aggregate minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes including making good floor complete all as specified and directed. |
| 103 | S&F as in repair 10 ltr capacityPVC valveless,syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, complete all as specified and directed. |
| 104 | S&F in repair, Vitreous china wash basin pedestal type, white, flat back, size 550x400 mm excluding taps, chain and plug and porcelain stopper but including CP waste coupling & brackets and fixed complete all as specified and directed. Make : Jaquar cat part No : - COP-001BPM or CERA cat part no-1067A or equivalent in Hindware/Prayag. |
| 105 | S&F in Repairsinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed. |
| 106 | S&F in repairs 600 mm x 450 mm beveled edge mirror of selected quality glass 5.5mm thick mounted on 6mm thick AC building board or commercial plywood & fixed with wooden plugs with chromium plated brass screws and washer and aluminum beading complete all as directed. |
| 107 | M & L for 200mm thick (spread thickness) soling (or sub base) with broken boulders or quarried stones (granite or trap or basalt stones ) of size rang 100 mm to 150 mm,deposited, spread, levelled in one layer, interstices filled, surface formed, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, complete all as specified |
| 108 | Dismantling laid dry or laid dry and pointed Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specifed and as directed. |
| 109 | Demolition of cement concrete (unreinforced)in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) Complete all as specified and directed. |
| 110 | Dismatling timber scantling40 sqcm and abovein any position ,unframed work complete all as specified and directed |
| 111 | Dismantling boarding, any description, fixed in any position with screws complete all as specifed and as directed. |
| 112 | Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified and as directed. |
| 113 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coverings, all as specified and directed. |
| 114 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 115 | Demolition and breaking of 150mm dia up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar |
| 116 | Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed. |
| 117 | M & L for Anti skid Ceramic coloured tiles of size 600x600x7-8mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on, as specified. |
| 118 | M & L Glazed ceramic coloured tiles in vertical surface 300x600x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 etc. complete all as specifed and as directed. |
| 119 | M&L for Heavy duty Endura tile of size 300x300x10mm , set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified and directed. |
| 120 | M&L for rendering 15 mm thick readymade plaster on inner/outer walls. Ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 days- 10-12 Mpa/Bulk density-1500-1600 kg/cum. Note : The rate quoted by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 10 mtr height, all as specified and directed. Make: - Ultratech (Readyplast)/JK Smart/JSW cement/ Birla Aerocon |
| 121 | M&L 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal,moisture resistance,anti borer, as per IS 14587 for kitchen/ Cupboards shelfs fixing with 1st class hard wood lipping/beading etc. complete all as specified and directed. Make : - Action Tessa/Green ply/ Century |
| 122 | M&L for Pressed steel window frame made out of 1.2 mm thick sheet with one or more rebates including necessary fixing lugs , hinges ,lock strike plate , etc size 125x60 mm including stainless steel square tubes of size 25x25mm as in grills, complete all as specified. |
| 123 | S&F in repair Soap dish wall mounted Meridian Double Soap Dish of Stainless steel Chromium plated finish, fixed to plugs with chromium plated brass screws, complete all as specified and directed. Cat Part No: Cera, F5015126CH or equivalent in Jaquar/Prayag/Hindware. |
| 124 | S & F in repairs, Cabinet mirror plastic premium multipurpose wall mounted storage cabinet with mirror, prime look (white) of size 30.8cm x 49.5cm complete all as specifed and as directed. |
| 125 | S&F in repairs, Stainless steel wall mounted Plate rack of size 780x760x240mm, thickness of sheet not less than 1.00mm and weight not less than 7.50Kg of approved design/pattern (as approved by Engr-in-Charge with provision for keeping plate and other crockery, fixed with screw and rawl plugs etc on wall , complete all as specified and directed. Make:- Prayag/ Hindware/ Jayana/ Nirali |
| 126 | M & L for Glazed ceramic coloured tiles in vertical surface of size 300x600x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specifed and as directed. |
| 127 | M & L for Anti skid Ceramic coloured tiles of size 600x600x7-8mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on, as specified complete all as specifed and as directed. |
| 128 | M&L for Anti skid Ceramic coloured tiles of size 400x400x7-8mm set and jointed in neat cement slurry and pointed in white or coloured cement to match to match with the colour of tiles laid on, as specified complete all as specifed and as directed. |
| 129 | S&F in repairs, Stainless Steel Wall Mounted magnet Door Stopper of size7.50 x 3 cm (Dia), all as specified and directed complete all as specifed and as directed. |
| 130 | M&L for applying Pitch free PU based Liquid applied single component elastomeric seamless, water and vapour proof membrane system Nitoproof 600F for concrete @ 2.50kg/Sqm (02 coats) over 15mm thick plastering in cement mortar 1:4 for roof treatment portion only including taking down of existing roof treatment. Typical applications will include roofs, podium, balconies, floor slabs, suspended floors, patios, bathrooms and toilets, inspection pits, swimming pools, bridge decks, confirming Tensile strength (2N/mm2) (ASTM D412)/Tear resistance (15KN/m) (ASTM D624-00 and Crack bridging (ASTM C836/ASTM C1305 modified) 2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water. Make : Fosroc/Sika/CICO/Asian paints or equivalent . All above operations to be done in the presence and supervision of auth applicator in order. |
| 131 | M&L 163 mm Inner dia and 180 mm outer dia mm Bore of DWCPE pipe (SN8) (ID) pipe with coupler, ring and bends as required , laid in trenches and jointed completeincluding testing complete all as specified and directed. |
| 132 | Supply, Installing, fixing and testing of on site LLDPE septic tank for 30 users conventional type designed to carry sewage and sullage water and vent shaft, connection etc, complete, all as specified and directed. |
| 133 | Taking down carefullyAluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed. |
| 134 | M & L point wiring for Modular fittings for one light point/ fan/ bell/ 5Amps socket out let (independent) point controlled by one, one way modular switch with 1.5 sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS)PVC cable drawn into & including medium grade PVC conduit (not less than 20mmouter dia) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) including modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistrandedcopper conductor cable earth wire and connected to earth dolly complete all as specified and directed. |
| 135 | All as per item No. 134 here in before but for One light point controlled by Two way modular switch. |
| 136 | All as per item No. 134 here in before but for One modular socket outlet 3 pin 6 ampscontrolled by one switch on sameboard. |
| 137 | All as per item No. 134 here in before but forOne modular socket outlet 3 pin 6 ampscontrolled by one switch onindependent board. |
| 138 | All as per item No. 134 here in before but for wiring with 2.5sqmm copper wire (FRLS) PVCand 2.5 sqmm earth wire formodular socket outlet 5 pin 16 amps on independent board. |
| 139 | S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated sheathed 1100 volts grade single core multi-stranded) copper conductor cable (FR-LSH) drawn into and including PVC casing capping of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed,are as follows :-One socket outlet 3 pin 5 ampscontrolled by one switch onindependent board. |
| 140 | All as per item No 139 herein beforebut wiringwith 2.5 sqmm copper wire (FR-LSH) PVCand 2.5 sqmm earth wire forsocket outlet 3 pin 16 amps on independent board. |
| 141 | Supply and fix modular type switch single pole, one way 6 Amp complete all as specified and directed. |
| 142 | S&F modular switch, 2 way 6 Amp 1 modulecomplete all as specified and directed. |
| 143 | Supply and fix socket out letmulti 5 pin, 6 Amps, modular type complete all as specified and directed. |
| 144 | Supply and fix switch modular type single pole, one way 16 Amp complete all asspecified and directed. |
| 145 | Supply and fix socket out let 2 in1,3 pin, 6 and 16 Amp, modular type complete all as specified and directed. |
| 146 | S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed. |
| 147 | S&F socket out let 2 in 1 multi 3 pin, 5 Amps, flush type complete all as specified and directed. |
| 148 | S&F switch piano flush type single pole, one way 15 Amp complete all asspecified and directed. |
| 149 | S&F socket out let 2 in1,6 pin, 5 and 15 Amp, flush type complete all as specified and directed. |
| 150 | S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed. |
| 151 | S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 152 | Supply and fix High quality LED T8 indoor batten tube light 20 Watt with aluminium extrusion in D shaped have large diameter for increased convection heat transferincl one LED PC tube rod and driver,internaly pre wired of 1.5 sqmm twin twisted flexible cableall as specified & directed.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 153 | Supply and fix in replacement High quality LED smart batten tubelight 20 W, aesthetically designed LED having extruded aluminum housing with Microwave motion technology for providing an energy efficient solution and with aluminum housing & integrated electronic driver.,internaly pre wired of 1.5 sqmm twin twisted flexible cable of make Havells with cat part no.LUMILINESMART20WLED865PCWH or equivalent, all as specified & directed.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 154 | S & F in replacement Recess mounting LED luminaire 600mm x 600 mm ,36 W, 220v, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.Note: The contractor must submit 5 years warranty for LED fitiings. |
| 155 | Taking down unservicable MCB and S&FMCB SP,240 volts,AC C curve, 10 KA 6 to 32 Amps . |
| 156 | Taking down unservicable MCB and S&FMCB SPN , 240 volts,AC B curve, 10 KA 40 Amps. |
| 157 | Taking down unservicable MCB and S&FMCB DP , 240 volts,AC C curve, 10 KA 40 Amps. |
| 158 | Taking down unserviceable MCB S & FMCB TPN , 415 volts, AC C curve, 10 KA 100Amps. |
| 159 | S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps including one 15 Amp switch on existing board with wiring for switching geyser on/off complete all as specified and directed. |
| 160 | Supply & Fixing of non metallic PVC conduit 25 mm exclusive of boxes but including of all tees,bends,elbows, reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts,saddles, pipe hooks etc. concealed in wall ceiling floor etc for television/DTH/telephone/Data cable complete all as specified and directed. |
| 161 | S& F socket outlet for TV/Video/audio device modular type with inner and outer modular plate type, specially built for wall/high mounted TV and inc pressed steel/metal flush box concealed complete all as specified and directed. |
| 162 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete. all as specified and directed .NOTE : The contractor must submit 5 years warranty for LED fittings |
| 163 | Taking down unservicable DB and S&F sheet metal enclusure for DBs(double door type)single pole and neutral 8 way including blanking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 164 | S&F sheet metal enclusure for DBs(double door type)Triplepole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed . |
| 165 | S & FLED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings |
| 166 | Taking out old U/S Sub main wiring for replacement includingS&F sub main wiring withtwo single core FRLSPVC insulated and sheathed 1100 Volts grade,6.0 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mmdia with all accessories and one continuous run of6.0 Sqmm copper conductor PVC complete all as specified and directed (Note :-Two single core cables along with earth wire and conduit shall be measured as one unit length). |
| 167 | M&L for earthing complete with galvanised steel,earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs belowground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handleto cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed.Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 168 | S & F call bell ding dong AC, 230V single pole fixed over with and including sunk spressed steel box of size 175mmx100mm with 3mm thick plastic laminated backalite shut cover fixed with brass screw complete all as specified and directed, |
| 169 | S&F modular bell push, 6 Amp 1 modulecomplete all as specified and directed. |
| 170 | S& F LED Bulb of 9 watt as specified .NOTE: The contractor must submit 5 years warranty for LED fittings |
| 171 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings |
| 172 | Supply and fixing Geyser 25 Ltr Capacity, BEE five star rating with Digital Temperature Display & heating element upto 2 KW, ISI mark, with all accessories such as safety valve, thermostate, NRV, connection piece etc, and making good as per existing surface Complete all as specified and directed. |
| 173 | S & F Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories and cutting opening on wall and making good as per existing surface complete all as specified and directed |
| 174 | S&F Exhaustfan metallic bady ISI mark, 300 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed. |
| 175 | Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core. |
| 176 | Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core. |
| 177 | M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified |
| 178 | M&L for laying of bricks well burnt sub class ‘B’ (old pattern) laid flat for cable protection width equal to the lengrth of brick complete all as specified . |
| 179 | M & L galvanised steel water tubing \"light grade\"40 mm bore with all fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed . |
| 180 | M & L galvanised steel water tubing \"light grade\"25 mm bore with all fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed . |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
