|
| 1 | Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed. |
| 2 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)complete all as specified and directed. |
| 3 | All as per item No 02 above but except bricks.NOTE: Old burnt clay bricks retrieved from demolition shall be used. |
| 4 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 5 | M&L for cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25 complete all as specified. |
| 6 | M&L for PCC 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) mixed with water proofing compound as per manufacturer’s instructions as in padding on roof, surface finished even and smooth without using extra cement all as specified and as directed.(Note:- WPC shall be measured and paid separately) |
| 7 | M&L liquid water proofing treatment to RCC roof slabin following procedure :(a) M&L forliquid water proofing treatment to RCC roof slab incl dismantling of existing water proofing treatment with existingAPP sheet ,plaster , mud fuskas,brick tiles etc of any description in following procedure:-(b) Prepare the surface by cleanining with concrete surface grinder/ wire brush and a high pressure water jet and ensure that it is free of dust, oil and loose particles. Damaged portions, hollow area must be repaired with epoxy mortar and repair cracks of old concrete by cutting \"V\" groove, corners and joints of drain pipes, channels etc. treated with epoxy mortar prepared with epoxy primer (as per manufacturer\"s instructions).(c) Laying 10mm thick rendering in Cement mortar 1:3 with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of concreteroof surfaces, finished even and fair to receive treatment on roof Complete (d) Applying three coats of polyurea waterproofing coating as per manufacturer\"s instructions for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx. 500% ± 50% and tensile strength at 14 days of 5MPa.(e)The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge / Consultant. (Note:- minimum 6 hrs interval between two coat shall be maintained)(f) All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system.Note:- (i) Work to be carried out by authorized applicator and as per manufacturer’s instructions.(ii) Providing test with filling of water for continuous 48 hours if there is any leakage than entire treatment will be done again by contractor without any additional cost.(iii) The rate includes for filling cracks in existing roof with epoxy cement mortar using suitable bonding agent before laying cement plaster. |
| 8 | Dismantlingfloor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed . |
| 9 | M&L for 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layerin cement mortar 1:6etc complete all as specified and directed.Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. |
| 10 | M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE |
| 11 | S&F joint free non skid coloured Ceramic tiles 07mm to 08mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 12 | S&F joint free non skid coloured Ceramic tiles 07-08 mm thick (square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 13 | S&F joint free non skid Ceramic tiles, coloured 7mm to 8mm thick (square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in vertical/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 10mm thick backing coat/redering in cement mortar 1:4 for fixing of tiles complete all as specified and as directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE |
| 14 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.& Brushing neat cement slurry with 3.0kg of cement per sqmetrecomplete all as specified and directed. |
| 15 | M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE |
| 16 | Demolition of Roofs, floors (other than ground floors), beams staircases, landing, cooking platform ,chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed.Note:- Demolition will be done only by mechanical cutter only . |
| 17 | M&L for RCC type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately). |
| 18 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed |
| 19 | M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. |
| 20 | Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etcincluding necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed. |
| 21 | M&L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cementincluding necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.(Note:- WPC shall be measured and paid separately) |
| 22 | M&L for preparation of newly plastered external surfaces of wall by scrapping with mechanical wall sander , having RPM not less then 1500 andapplying Two or more coats of water based premiumacrylic smooth exterior paint (weather proof/weather coat: APEX ULTIMA) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.79 litre(undiluted)/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm(weather proof/weather coat) over and including water proof cement based 1.5mm thick wall care putty without any brush marks on the surface in any colour over including necessary scaffolding up to three storeys height of bldgs,Shade/colour shall be approved by GE, complete all as specified and as directed. |
| 23 | M&L for complete removal of existing treatment externally surface of wall by scrapping with mechanical wall sander , having RPM not less then 1500 andapplying Two or more coats of water based premiumacrylic smooth exterior paint (weather proof/weather coat: APEX ULTIMA) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.79 litre(undiluted)/ 10 sqm overand including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) over and including water proof cement based 1.5mm thick wall care putty without any brush marks on the surface in any colour over including necessary scaffolding up to three storeys height of bldgs,Shade/colour shall be approved by GE, complete all as specified and as directed. |
| 24 | M&L for rendering 15 mm thick in cm 1:6 on other than fair faces of brick work , concrete surfaces of wall,finishing surfaces even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed. |
| 25 | M&L for preparation of newly plastered internally old surfaces of wall by scrapping with mechanical wall sander , having RPM not less then 1500 and applying min 1 to 1.50 mm thick wall care putty on the surfaces & making the surface absolutely smooth surface and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgsif required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 26 | M&L for complete removal of existing treatment internally surface of wall by scrapping with mechanical wall sander , having RPM not less then 1500 and applying min 1 to 1.50 mmthick wall care putty on the surfaces and making surface absolutely smooth and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,complete all as specified and as directed. |
| 27 | M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed. |
| 28 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgsif required complete all as specified and as directed. |
| 29 | M&L for Preparing old surfaces of ceiling and applying two coat of white wash on undecorated surfaces without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed. |
| 30 | M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed. |
| 31 | M&L for Preparing old surfaces of wall and applying two coat white wash evenly complete all as specified. |
| 32 | M&L for preparation of old painted steel and iron surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surface including necessary scaffoldingcomplete all as specified and as directed. |
| 33 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed. |
| 34 | M&L for writing letters or figures (block, Roman, Italic or Indian) exceeding 15 centimeter high but not exceeding 30 centimeter high etc with synthetic enamel paint including necessary scaffolding up to four storeys height of bldgsif requiredcomplete all as specified and as directed. |
| 35 | M&L for cutting down plants / trees of girth not exc 15 cm & surface are not exc 0.36 Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-O or cement mortar 1:2 complete all as per manufacturer instructions and as specified. NOTE: Any CI/GI/PVCpipes and fittings damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc ,hoisting, lowering and protective measures etc up to four storeys height of bldgs and removing of debris out of MoD land complete all as specified and as directed. |
| 36 | Supply only `Liquid Water Proofing Compound. complete all as specified and as directed . |
| 37 | Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the freme) complete all as specified and directed. |
| 38 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site. |
| 39 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm eachand removingfrom site complete all as specified and directed. |
| 40 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm and refixing in same opening after easing, adjusting and replacement of minor nails etc, complete all as specified and directed. |
| 41 | S&F pressed steel frames door 105 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plateincluding one shop coat of primer complete all as spd and directed |
| 42 | S&F pressed steel frames door 165 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plateincluding one shop coat of primer complete all as spd and directed |
| 43 | M&L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling ofhollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed. |
| 44 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, confirming to IS- 2202(Part-I-1999) , ISI Marked complete all as specified and directed |
| 45 | S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats Note:wire cloth shall be measured separately |
| 46 | S&Fstainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed. |
| 47 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 48 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paintall as specified. |
| 49 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet ,reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 50 | S&FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet PVC ‘C’ channel having a plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 51 | S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow\" section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill10 mm sq bar includingtwo coat of synthetic enamel paint overonecoat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast , includingplain/figured glass and wire mesh complete all as per details shown in drawing No CEPZ/TD-245/01 sheet No 1/1 and CEPZ/TD-246/01 sheet No 1/2 & 2/2including taking down existing spoiled and unserviceablewindows/ventilators of any type ( wooden/steel) complete all as specified and directed |
| 52 | S&F 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 53 | M&L for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white including 3mm thick lipping and equal to thickness of board as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. |
| 54 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 55 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed |
| 56 | S&F hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100complete all as specified and directed. |
| 57 | S&FContinuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 58 | S&F stainless steel butt hinges of size 100mmlong for fixing of pvc door shutter etc complete all as specified and directed. |
| 59 | S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed |
| 60 | S&F Aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed. |
| 61 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified. |
| 62 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor overall length of cover plate 140mm complete all as specified and directed. |
| 63 | S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames.complete. |
| 64 | S&F in repair 25mm outer dia stainless steel decorative drapery rod ( Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets ( Model:- SS 25 BR, Vista) near to ends with stainless steel finials ( Model:- SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings) |
| 65 | S&F peg set of 4, brass chromium plated, fancy type, superior quality and fixed with screws complete all as specified and directed. |
| 66 | Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. |
| 67 | S&F 15mm bore Steel water tubing \"medium grade\", galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 68 | Fixing only 15mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings) |
| 69 | Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. |
| 70 | S&F 20mm bore Steel water tubing \"medium grade\", galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. |
| 71 | Fixing only 20mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings) |
| 72 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 73 | S&F in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe |
| 74 | S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe |
| 75 | S&FRotational moulded polyethlene water storage tanks white in colour,three layers of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks, outlet & over flow pipe etc complete all as specified and as directed. |
| 76 | S&F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms) |
| 77 | S&F in repair 15 mm borelong body CP Bib taps castcopper alloy fancy type with capstan heads (chromium plated),and cupscrewed down , high pressure for iron pipe mpete all as spd & directed. |
| 78 | S&F in repair 15 mm bore Stop valves (angle type), fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and as directed. |
| 79 | S&F in repair stop valves (ISI marked),15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup (concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. |
| 80 | S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 81 | S&F in repairs Brass CP shower rose 125mm size including fixing to steel pipe or unioncomplete all as specified and directed. |
| 82 | S&F in repairs Tubular towel rail, ISI marked 60cm long between flanges , 20mm diaBrass Chromium plated inclbrackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 83 | S&F in PVC Coloured bathroom cabinet looking mirror divided into shelf overall size 622mm x 432mm complete all as specified and as directed by Engr-in-Charge. Make: Nilkamal/ Prayag/ Polytuf |
| 84 | S&F in repair 5mm thick looking mirror of size 600x450mmof selected quality glass mounted on 6mm thick AC building board or commercial plywood and aluminium angle beading around mirrior fixed onwall PVC plug and screwsetc complete allas specified and directed |
| 85 | S&F in repair stainless steel soap dish, any type fixed to plugs chromium plated brass screws complete.Make:Cera or equivalent. |
| 86 | S&F inrepair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm longfixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 87 | S&F in repair corner glass shelf with bracket (size 250x250mm) fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed by Engineer-in-charge Make : ACN-CHR-1173 of JAQUAR or equivalent in any of the make mentioned in list of products. |
| 88 | S&F in repair viterous China squatting pan, `Orrisa\" pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed. |
| 89 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed. |
| 90 | S&F in repairs Viterous China wash basin, white, flat back, size 550x400mmexcluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but including waste coupling of fixing of supply and waste pipe complete all as specfied and as directed. |
| 91 | S&F in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mmand bowl size 410mmx330mmx 160mm complete all as specified and directed. |
| 92 | S&F in repair32 mm bore low density polythylene waste pipe (LDPE) of presser rating 6 kg/ sqcm complete all as specified and directed. |
| 93 | S&F in repair Stainless steel plate rack(Utensil Rack) of size (600mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed. |
| 94 | S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both endsscrewed both endfor iron pipes. |
| 95 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm |
| 96 | M&L for PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. |
| 97 | M&L for PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. |
| 98 | Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipeincluding all fittings ,heads shoes, bends etc including removal to store ,Internal dia of pipe in 75MM/110mm complete all as specified and directed.all as specified and directed. |
| 99 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed. |
| 100 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.(ISI MARKED) |
| 101 | S&F PVC (SWR) bends any radius 75mm dia all as specified and directed.(ISI MARKED) |
| 102 | S&F PVC (SWR) bends any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 103 | S&F PVC (SWR) bends with access door any radius 75mm dia all as specified and directed.(ISI MARKED) |
| 104 | S&F PVC (SWR) bends with access door any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 105 | S&F PVC (SWR) Single \"T \" any radius 110mm dia all as specified and directed.(ISI MARKED) |
| 106 | S&F PVC (SWR) Single\"T\"radius 75mm dia all as specified and directed.(ISI MARKED) |
| 107 | S&F in repairs 75mm PVC floor trap, ISI marked withcp grating with/without waste pipe hole incl jointing to waste pipe fixed with solventcement complete all as specified and as directed. |
| 108 | Cutting holes in brick wallsbuilt in cement mortar or cement lime mortar for inserting holdfasts/purline/rafter etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required,Depth of embedded portion of holddfasts or lugs measured from the face of the jamb into the wall exc Half brick but not exc one brick complete all as specified and directed. |
| 109 | Dismantling structural steel work including doors, gates complete all as specified and directed |
| 110 | M&L for framed work as in door or gates of angle or other section complete drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging with and including hooks or hinges and hanging also fastening and fixing complete con |
| 111 | Cutting channels, grooves or rebates in brick/concrete wall n. exc 15 cm girth, and trimming surface complete all as specified and directed |
| 112 | M&L for plaincement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 113 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m,etting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,soft/loose soil. |
| 114 | Dismantling of Asbestos cement (corrugated, semi corrugated , etc) sheets in roof coverings etc complete all as specified and as directed. |
| 115 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 116 | S&F mild roof structural steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlines and fastening including distance pieces etc. complete all as specified and directed. |
| 117 | M&L for PCC in foundations, filling and mass-concrete type C-2 (1:3:6) using 40 mm gradedcrushed stone aggregate for post complete all as specified and directed. |
| 118 | M&L for stopping roof leakage by repairing ofroof with filling of joints of existing APP membrane with hot blown bitumen or with CM 1:3 mixed with WPCas per site requirerment area not exceeding 5 sqm each complete all as specified and as directed. (Note:- WPC shall be measured and paid separately) |
| 119 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 63,355.00 and any other reduction if any from quoted amount. |
