Tender For Special Repair To Building No P-29, (273 To 280) P-112, (01To 08), P-113 (01 To 08) Total 24 Qtrs In Kse Enclave At Patiala, Patiala-Punjab

TDR : 52920571

Tender Notice
BOQ

27 Days Left

Patiala , Punjab

Tender Brief : Tender For Special Repair To Building No P-29, (273 To 280) P-112, (01To 08), P-113 (01 To 08) Total 24 Qtrs In Kse Enclave At Patiala

Document Fees
₹ 1000 /-

EMD
₹ 202000.0 /-

Tender Value
₹ 1.26 Crore /-

Submission Date
09-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engineer-in-Charge
2	Demolition of mud in roofs, any thickness, including plastering and leeping(whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge.
3	Material and labour for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed by Engineer-in-Charge.
4	Material and labour for cement concrete 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 45mm to maintain slope of 1:100, complete all as specified andas directed by Engineer-in-Charge.
5	Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by Engineer-in-charge
6	Material and labour for laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer 0.40 Itr/sqm by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70-160 cps Over the coat, the layered APP membrane shall be laid using butane torch and sealing all joints etccomplete as per standard practice and as per manufacturers instructions.complete all as specified and as directed by Engineer-in-charge.
7	Material and labour for cement concrete tiles with grey cement & no pigments of size. 25 cm x 25 cm and 20 mm thick, machine pressed and cut polished and set jointed and pointed in neat cement slurry laid over and including 15 mm thick screed bed in cement mortar (1:3)and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound as per manufacturers instructions over roof surfaces complete all as specified and as directed by Engineer-in-Charge.
8	Material and labour cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregates as in mud stops, benching and coping etc rounded or chamfered on edges complete all as specified and as directed by Engineer-in-Charge
9	Supply and fixing PVC(HDPE) rain water pipes, 150 mm bore, single socketed in any length with rubber ring joints fixed to wallswith flat iron clamps of size 25 x 3mm, incluing bolts, washer, nuts etc includingtaking down existing damaged CI rain water pipe complete all as specified and as directed by Engineer-in-Charge
10	Supply and fixing in repair PVC (SWR) bends/tees of any radius for 150mm borecomplete all as specified and as directed by Engineer-in-charge.
11	Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed by Engineer-in-charge.
12	Material and labour for Non - skidCeramic coloured tiles 7-8 mmthick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cementslurry laidover and including15 mm thick screed bed incement mortar (1:4) and pointed in white or coloured cement to match the tiles complete all as specified and as directed by Engineer-in-Charge.
13	Material and labour for Glazed ceramic coloured tiles of size 350 mmx 250 mm x 7 mm/ 450mmX 300mmX 7mm thickas onvertical surface such as skirting , dado etc set and jointed in neat cement slurry. over and including 10 mm thick rendering in cement mortar 1:4 thick and pointed in white or coloured cement tomatch the tilescomplete all as specified and as directed by Engineer-in-Charge.
14	Material and labour for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, size of eachtile not exceeding 0.36 sqmin floors etc. set and jointed in neat cement slurry , laid over and including 15mm thick screed bed in cement mortar (1:4) and pointed in white or coloured cement to match the tiles complete all as specified and as directed by Engineer-in-charge.
15	Demolition ofStone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-charge.
16	Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and as directed by Engineer in charge.
17	Material and labour for18-20 mm thickGreen marble (Baroda),machine cut as in shelves /steps /cills /jambs /skirting /border and the like works and flooring,including bull nosingetc, laid over & including screed bed /rendring15mm thick in cement mortar (1:4) jointed and pointed in white cement (1:2) using mable dust with admixture of pigment to match the shade of slab including rubbing,cutting and mirror type granite polishing complete all as specified and as directed by Engineer-in-charge.Note: Single piece should be used in steps/cills/jambs/shelves.
18	Material andlabour for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like laid over and including 20 mm thick screed bed in cement mortar(1:4) jointed and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-charge.
19	Demolition of cement concreteunreinforced in ground floors and pavings n, exc 15 cm(below or above ground level)complete all as specified and as directed by Engineer-in-charge.
20	Material and labour for cement concrete 1:7:12 , type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and as directed by Engineer-in-charge.
21	Material and labour for carrying out water proofing treatment of sunken floor complete all as specified under:-(i) The concrete/wall surface shall be cleared thoroughly of all laitance,loose particles,dust,grease etc and any friable and unsound area which shall be chipped,cleaned and thereafter pre-wetted to a satured surface dried condition. (ii) In case of pot holes/superficial cracks,the same shall be repaired with polymer modified mortar using URP as admixture @ 10% of cement content. (iii) The polymer modified mortarusing URP as admixture @10% of cement content shall also be applied on vertical surfaces after removing of plaster upto 60 cm height.(iv) The surface thus prepared shall be coated by applying 2 coats of Dr Fixit Hydrochem super in the sunken areas and extending it upto 150 mm above the finished floor level.This includes layer of a 150 mm wide strip of an open woven glass fiber mesh over the PCC benching (Gole) on the 1st coat whille it is still wet.(v) Rendering 15 mm in CM 1:4 admixed with integral water proofing compound 1 W+ @ 200 ml per bagof cement complete all as specified and as directed by the Engineer-in-Charge.
22	Materila and labour for Providing 50 mm dia boreGI pipe light grade pile as inspouts complete all as specified and as directed by Engineer-in-charge.
23	Material andlabour for 40 mm thickfor cement concrete type B-1. 1:2:4 (20mm graded aggregate) as inflooring and finishing the floor even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. .
24	Supply and fixing in repair vitreous china premium/1st quality wash basin,flat back, size 550x400 mm with pedestal, including cutting for and pinning in ends of brackets including brackets and 32 mm brass CP waste coupling and waste pipe complete all as specified and as directed by Engineer-in-charge.
25	Supply and fixing in repair vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F.complete all as specified and as directed by Engineer-in-charge.
26	Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and as directed by Engineer-in-charge.
27	Supply and fixing in repair flushing cistern of PVC 10 ltr. capacity. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing complete all as specified and as directed by Engineer-in-charge.
28	Supply and fixing 100 mm bore Cast iron (spun cast) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge.
29	Supply and fixing 100 mm bore Cast iron , (spun cast) soil waste and vent pipe, Centrifugal typein any length, with or without ears, with cementjoints, fixed to walls with and including stack clamps (25x3 mm), including nuts , bolts etc. and making necessary connections complete all as specified and as directed by Engineer-in-charge.
30	Supply and fixing 75mm bore Cast iron (spun cast) , soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge.
31	Supply and fixing 75 mm bore Cast iron (spun cast)soil, waste and vent pipe, Centrifugal type,in any length, with or without ears, with cementjoints, fixed to walls with and including stack clamps(25x3mm), nuts , bolts etc. and making necessary connections complete all as specified and as directed by Engineer-in-charge.
32	Supply and fixing cast iron branch pieces singleCentrifugal type (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 100 mm bore pipe, fitted with oval access doorjointed with cement joint complete all as specified and as directed by Engineer-in-charge.
33	Supply and fixingcast iron branch pieces single Centrifugal type (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 75 mm bore pipe, fitted with oval access doorjointed with cement joint complete all as specified and as directed by Engineer-in-charge.
34	Supply and fixing in repair CI CowlCentrifugal type suitable for 100 mm bore pipe complete all as specified and as directed by Engineer-in-charge.
35	Supplyand fixing Cast iron bends/Tee duck foot or heel rest, radiusfor 75 mm bore pipe complete all as specified and as directed by Engineer-in-charge.
36	Supply & fixingCast iron bends/Tee duck foot or heel rest, radiusfor 100 mm bore pipe complete all as specified and as directed by Engineer-in-charge.
37	Supply and fixing in repair Salt-glazed stoneware gully traps,Centrifugal type 150x150mm size,square or round mouthed, type \"P\" or \"S\" including CI grating complete all as specified and as directed by Engineer-in-charge.
38	Supply and fixingin repair Cast iron floor trap,dia of outlet100mmwith grating including jointing to waste pipe with solvent cement fixed/ embedded in cement concrete type B-1 1:2:4 complete all as specified and directed by Engineer-in-Charge.
39	Supply and fixing doubled layered rotational moulded polyethylene white water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20mm ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank with grating complete all as specified and directed by Engineer-in-Charge.
40	Taking up or down 15 mm steel tubing and connections, including cleaning for refixing or removal to storecomplete all as specified and directed by Engineer-in-Charge.
41	Taking up or down 20 mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. .
42	Supply and fixing 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and celing or laid in floor etc complete all as specified and directed by Engineer-in-Charge.
43	Supply and fixing 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and celing or laid in floor etc complete all as specified and directed by Engineer-in-Charge. .
44	Supply and fixingGun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20mm bore and fixed complete all as specified and directed by Engineer-in-Charge.
45	Supply and fixing in repair Bib taps,Cast copper alloy, fency type, chromium plated long body with wall flange screwed for 15mm bore iron pipe or for brass ferrule and fixed in position complete all as specified and directed by Engineer-in-Charge.
46	Supply and fixing in repairStop cock cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screw down high pressure, screwed both ends for 15 mm bore iron pipe or for union and fixed complete all as specified and directed by Engineer-in-Charge.
47	Supply and fixing 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed by Engineer-in-Charge.
48	Supply and fixing tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.
49	Supply and fixing stainless steel sink with drainage board, made of1.00 mm thick sstainless steel sheet for kitchen with plugs washers and waste couplingof 32mmbore and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410 x 330x160mm / 430x355x200 with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed by Engineer-in-Charge.
50	Supplyand fixing in repair Brass chromium plated WHB Mixer valve for mixing hot and cold water screwed down for 15mm bore dia iron pipe complete all as specified and directed by Engineer-in-Charge. Note: The quoted rate shall include the long braided hoses 450mm long for connection to angle cock complete.
51	Supply and fixing Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed by Engineer-in-Charge.
52	Supply and fixing in repair Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect complete all as specified and directed by Engineer-in-Charge.
53	Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.
54	Supply and fixing in repair Chromium plated shower roses125 mm size with or without swivel joints,including fixing to15mm bore diasteel pipe or union complete all as specified and directed by Engineer-in-Charge. .
55	Supplyand fixing in repair acrylic glass shelf assembly for soapdish and appropriate space for placing other things like tooth brushes comb tooth paste etc and fixed to walls with plug and brass chromium plated screws omplete all as specified and directed by Engineer-in-Charge.
56	Supply and fixing Stainless steel plate rack made out of 1 mm thick stainless steel sheet of size 900x750x250mm complete all as specified and directed by Engineer-in-Charge.
57	Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar , including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles, omplete all as specified and directed by Engineer-in-Charge.
58	Material and labour for Brick work with old size sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6)complete all as specified and directed by Engineer-in-Charge.
59	Material andlabour for Brickwork with old size subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in with cement mortar(1:4) complete all as specified and directed by Engineer-in-Charge.
60	Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm including cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed by Engineer-in-Charge.
61	Supply and fixing Mild Steel Pressed steel frames of size 105x 60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,complete all as specified and directed by Engineer-in-Charge.
62	Supply & fixing Mild Steel Pressed steel frames of size 125x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed by Engineer-in-Charge.
63	Supply and fixing factory made flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.
64	Supply and fixing 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass,gauze etc (without sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt-I section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed by Engineer-in-Charge.
65	Material and labourfor cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete type B-1 1:2:4 complete all as specified and directed by Engineer-in-Charge.
66	Material labour for cement concrete (1:2:4 ) type B1 using 12.50 mm graded aggregate asfilling in backof pressed steel /Holdfast Block etc complete all as specified and directed by Engineer-in-Charge. .
67	Supply andfixing stainless steel Butt hinges 100 mm size,medium weight complete all as specified and directed by Engineer-in-Charge.
68	Supply and fixing aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.
69	Supply and fixing aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
70	Supply and fixing floor door stopper of size 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed by Engineer-in-Charge.
71	Supply andfixing powder coated aluminium handles of size 125mm complete all as specified and directed by Engineer-in-Charge.
72	Supply and fixing stainlessHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc for curtain rod incl all fixing complete all as specified and directed by Engineer-in-Charge.
73	Supply and fixing 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plateincluding necessary welding to chowklhats complete all as specified and as directed by Engineer-in-Charge.
74	Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes of reqd size for hold fast block for new frame and making good the surface to match omplete all as specified and as directed by Engineer-in-Charge.
75	Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing omplete all as specified and as directed by Engineer-in-Charge.
76	Supply and fixing factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed by Engineer-in-Charge.
77	Material and labour for built in cup boards with pressed steel frame of size 75x45x1.25mm thick and shutter of 1.00 mm thick MS sheet including spray painting 2 coats over a coat of red-oxide primer on steel surfaces all around (overall external size of cup board shutter incl frameshall be taken into consideration for the purpose of measurement) including One Nohanging rod of CP steel 20mm bore with brackets & two Nos peg set of three pegs each fixed inside the shutter complete fixed in repairs i.e, including taking down and removal of old unserviceable wooden or steel built-in-cupboards incl frame from site complete all as specified and as directed by Engineer-in-Charge.
78	Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer omplete all as specified and as directed by Engineer-in-Charge.
79	Material and labour for Preparation of new wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primeromplete all as specified and as directed by Engineer-in-Charge.
80	Supply and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled anddouble shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect complete all as specified and as directed by Engineer-in-Charge. including supply and fixing following items :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -2 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf.(c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf and incl hook and eye.Note: complete shutter window will be treated as single uit and paid as single unit
81	Supply and fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixedwith stainless steel wire stapples, in steel/wooden frame omplete all as specified and as directed by Engineer-in-Charge.
82	Supply and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size complete all as specified and as directed by Engineer-in-Charge.
83	Material and labour for applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K or approved equivalent, having 100%elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. as per manufacturer instructions complete all as specified and as directed by Engineer-in-Charge.
84	Material and labour forapplying of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer\"s instructions and all as specified.Note : Theapplication of rust removal shall be gotdone through the authorised applicator of manufacturer of membrane only complete all as specified and as directed by Engineer-in-Charge..Make/Product: Sika Rustoff 100 or equivalent from Fosroc.
85	Supply and applying cementitious coating for corrosion protection having a cement base polymer modified rebar corrosion protection system by applying the first coat approx 1mm thick layer of product carbonation resistance 2mm of sikatop ArmatecR -108 or equivalent as specified corresponds to 20 mm of normal mortar;bond strength 1N/mm2 according to ASTM C 882-78 applying @ 4kg/m2 for two coats onto the prepared reinforcing steel with a medium-stiff brush.it is unavoidable that specified product will also be applied in the same way after a waiting time of 2-3 hours (+20C) complete all as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge.Note: The application of cementitious coating for corrosion protection shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.
86	Material and labour for providing ,mixing & applying two components Epoxy resin concrete bonding coat on prepared RCC surfaces as per manufacturers apecification incl prepration of surface by chipping and throughly cleaning of surface complete wherever required and as per directions of Engineer-in-charge.Consumption: o.5 kg/m2 complete all as per manufacturers instructions omplete all as specified and as directed by Engineer-in-Charge.Product requirements : complies with ASTM C 881 Type II Grade 2 class B+C.Note: The application of epoxy bonding primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.
87	Supply and applying a pre-batched one component polymer modifies cementitious patch repair mortar in 25mm thickness.Yield:approx 0.84 ltr/kg.System requirements:compressive strength =50 N/mm2 (28 days)according to ASTM C 109 : flexural strength = 3 N/mm2 (7 days)according to ASTM C 293-79consumption of 2.1 kg/sqm/mmNote: The applicator of polymer repair mortar shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.
88	Supply and fixing factory made pre-laminated PVC solid board 18-20mm thick pre-laminated both sides with wooden finished on one side and white finished laminated on other side as in cup-board front shutters complete fixed in position in all respect omplete all as specified and as directed by Engineer-in-Charge. including supply and fixing of following items:-(a) Stainless Steel (304 Grade) Finished tower bolt 100mm long -1 nos per leaf(b) Stainless Steel (304 Grade) FinishedHandles100mm - 1 nos per leaf(c) Stainless Steel (304 Grade) Finished magnectic catchers0 mm - 2 nos per leaf
89	Supply and fixing pre-laminated PVC solid board as in frames for cupboards shutters 40mm thick (doubled sandwiched of 20mm) prelaminated on one side with wooden finished complete fixed in position in all respect omplete all as specified and as directed by Engineer-in-Charge.
90	Supply and fixing Continuous (piano) hinges,mild steel, bright finish or electro galvanisedwidth of flaps 30 mm(when open) complete all as specified and as directed by Engineer-in-Charge.
91	Supply and fixing Stainless Steel 304 grade wire Basket of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position complete all as specified and as directed by Engineer-in-Charge.
92	Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed by Engineer-in-Charge.
93	Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-Charge.
94	Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. including raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed by Engineer-in-Charge.
95	Material and labour for rendering 15mm thick in two layers (10mm and 5mm respectively) on brick work or concrete surfaces or in chajjas/parapet walls etc in cemet mortar 1:4,mixing with liquid water proofing compound as per manufacturer\"s instructions,finished even and fair without using extra cement and fixing of chicken wire gauge where directed complete all as specified and as directed by Engineer-in-Charge. Note : WPC and chicken wire gauge will be measured and paid separately.
96	Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge.
97	Material and labour for rndering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
98	Material and labour forrendering5 mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
99	Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder on brick work or concrete surfaces or in chajjas/parapet walls etc complete all as specified and as directed by Engineer-in-Charge.
100	Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and as directed by Engineer-in-Charge.
101	Material and labour for applying ready made wall care putty on internal/external plastered surfaces of walls /ceilings /soffits (thickness vary from 2 to 3 mmas required for desired smoothness and levelling of surfaces in two or more layers) including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and as directed by Engineer-in-Charge.
102	Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-Charge.
103	Material and labour for applying two coats of interior oil bound distemper (light shade) on surface of walls , over & including a coat of interior wall primer as recommended for under coat by manufacturer of OBD and primer complete all as specified and as directed by Engineer-in-Charge.
104	Material and labour for preparation of newplastered surfaces of ceiling and applying three coats of white washcomplete all as specified and as directed by Engineer-in-Charge.
105	Material and labour for mild steel framed work as in brackets etc for cooler stands,supportings frame workfor sun shadeetc framed steps/stairs etc complete using MS railing/angle iron Steel bars, gusset plate etc complete all as specified and as directed by Engineer-in-Charge.
106	Material and labour for 50 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in plinth protection/ floor, surfaces finished even and smooth without using extraincluding provision of construction joints filled with Bituminous mastic asphalt complete all as specified and as directed by Engineer-in-Charge.
107	Material and labour for repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcherwith cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and as directed by Engineer-in-Charge.
108	Takingdown carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etcremoving materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of creditand making good the disturbed portion of all floor, ceiling etc complete all as specified and as directed by Engineer-in-Charge.
109	M&L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in new PVC conduit to be terminated in pressed steel terminal boxes with top cover plateincluding 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and as directed by Engineer-in-Charge..Notes:- (i) Switches and regulators shall be measured and paid for separately. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth. (iii) The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item. (iv) The cost of Eye/bottle thimblesused for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. (v). Rate of cutting chasing included in the unit rate quoted for this item.
110	Material and labour for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by 2 way and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plateincluding 1.5 sqmmPVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and as directed by Engineer-in-Charge..Notes:- (i) Switches and regulators shall be measured and paid for separately. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth. (iii) The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item. (iv) The cost of Eye/bottle thimblesused for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. (v). Rate of cutting chasing included in the unit rate quoted for this item.
111	All as per Sl item No 110.00 here-in- before but for one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and as directed by Engineer-in-Charge. .
112	All as per Sl item No 110.00 here-in-before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and as directed by Engineer-in-Charge.
113	All as per item No.110.00 here-i-n beforebut 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSHcopperearth wire for switch socket combination 3 pin 15 amps on independent board complete all as specified and as directed by Engineer-in-Charge.
114	Supply and fixing Modularswitch1 way, 6 Amps, 1 module, 230 volts complete all as specified and as directed by Engineer-in-Charge.
115	Supply and fixing Modularswitch2 way, 6 Amps, 1 module, 230 volts complete all as specified and as directed by Engineer-in-Charge.
116	Supply and fixing Modularswitch1 way, 16 Amps, 1 module, 230 volts complete all as specified.
117	Supply and fixingModularbell push switch1 way, 6 Amps, 1 module complete all as specified and as directed by Engineer-in-Charge.
118	Supply and fixingCall bell ding dong AC 230 volt single pole complete all as specified.
119	Supply and fixingModular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified and as directed by Engineer-in-Charge.
120	Supply and fixing Modularsocket 5 pin 6 &16 Amps, combination type2 module complete all as specified and as directed by Engineer-in-Charge.
121	Supply and fixing Modular Fan regulator step type, 120 watts, 2 module complete all as specified and as directed by Engineer-in-Charge.
122	Supply and fixing ceiling rose surface bakelite surface 65 x 50mm3 terminals complete all as specified and as directed by Engineer-in-Charge.
123	Supply and fixingLamp holder, PVC/ Polycarbonate type with back platecomplete all as specified and as directed by Engineer-in-Charge.
124	Supply and fixingNew generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07,with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and as directed by Engineer-in-Charge.
125	Supply and fixing surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable complete all as specified and as directed by Engineer-in-Charge.
126	Material and labour for replacement of sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire complete all as specified and as directed by Engineer-in-Charge.Notes :- (i) 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit (ii) Rate quoted for this items shall be inclusive of the cost of (iii) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(iv) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc.10 cm girth .
127	Material and labour for replacement of sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire complete all as specified and as directed by Engineer-in-Charge. Notes :- (i) 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit (ii) Rate quoted for this items shall be inclusive of the cost of (iii) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(iv) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc.10 cm girth .
128	Supply and fixing in repair MCCB, 4 Pole, 63 A, 16 KA for fixing in DB including proper thimble connection, thermal and magnetic release protectioncomplete all as specified and as directed by Engineer-in-Charge.
129	Supply and fixing in replacement of epoxy power coated MCCBdistribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified and as directed by Engineer-in-Charge.Notes :- MCCB will be measured and paid under seperate item (ii) Cost of Eye/bottle thimblesused for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (iii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(iv) connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size.
130	Supply and fixing in replacement sheet metal enclosure 8 ways double door for DBs when MCBs areto be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link allflush mounting type, drilling holes for incoming and out going cables with IP 43 protection complete all as specified and as directed by Engineer-in-Charge.
131	Supply and fixing in repair MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs ofincluding proper thimble connections complete all as specified and as directed by Engineer-in-Charge.
132	Supply and fixing in repair MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and as directed by Engineer-in-Charge.
133	Material and labour for earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497 including taking out old u/s earthing complete all as specified and as directed by Engineer-in-Charge.
134	Supply and fixing tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in squareLED Batten 18/20W 6500Kof capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable complete all as specified and as directed by Engineer-in-Charge.
135	Supply and fixingElegatly designed sleek surface mounted pressure die-cast aluminiumLEDluminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 20 W LED of 5000 K and making good the existing surface as per existingcomplete all as specified and as directed by Engineer-in-Charge.
136	Supply and fixing in replacement of Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including louvers and taking down u/s exhaust fan complete all as specified and as directedby Engineer-in-Charge.
137	Taking down and refixing of ceiling fanafter necessary cleaning painting and writing serial No. complete all as specified and directed by Enginner-in-charge.
138	Supply and fixing exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including louvers and taking down u/s exhaust fan complete all as specified and as directedby Engineer-in-Charge.
139	Supply and fixing in replacement of single pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge.
140	Supply and fixing in replacement of ElectricWater heater (Geyser) storage typeof capacity 25 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum&high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality PVC connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and as dirceted by Engineer-in-Charge.
141	Material and labour for replacement of PVC Meter Box of suitable size for single phase LT meter. door with 1 Nos of transparent glass of suitable for visibility of meter fixed on door with suitable arrangemnets. meter box shall be fixed in wall complete all as specified and as dirceted by Engineer-in-Charge.Notes:- Necessary cutting/ chiselingof brick wall for fixing of meter and make good of wall shall be included in quoted cost.(ii) To fix the meter box required disconnecting and refixing of connections to be included in quoted rate.
142	Supply and fixing LED lamp invertor technology 9 watt with 4 hour power back up with efficiency more than 100 lumen per watt, Lithium ion battery including removing of unserviceable lamp complete all as specified and as dirceted by Engineer-in-Charge.
143	Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and as dirceted by Engineer-in-Charge.
144	Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and as dirceted by Engineer-in-Charge.
145	Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding1.5 mtr above the starting point complete all as specified and as dirceted by Engineer-in-Charge..
146	Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm abovewith dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming complete all as specified and as dirceted by Engineer-in-Charge.. Note:- only punned thickness shall be measured for payment
147	Material and labour for cutting of hardstanding floor/wall for laying of cable includingmaking good the surface after laying pipr/cable to match with suface by using cement concretecomplete all as specified and as dirceted by Engineer-in-Charge.
148	Material and labour for Boring of holes under road, pavement, hard standing by trench-less technology using ultrasound technique and necessary machine suitable to pass through 40 to 80 mm boreGItubing and cable etc complete all as specified and as dirceted by Engineer-in-Charge..Note:- GI pipe shall be measured and paid seperately under relevant item.
149	Supplying and laying factory made unreinforced Precast concrete cable coversclass LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as specified and as dirceted by Engineer-in-Charge.
150	Material and labour for replacement of GI tubing light grade 40 mm borefor passing through cables under the floor ,along the wall or along the pole complete all as specified and as dirceted by Engineer-in-Charge..
151	Supply and laying XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core including taking down/out existing u/s cable complete all as specified and as directedby Engineer-in-Charge.
152	Supply and fixing Modularswitch1 way, 16 Amps, 1 module, 230 volts complete all as specified and as directed.
153	Supply and fixingModularbell push switch1 way, 6 Amps, 1 module complete all as specified and as directed.
154	Supply and fixing Call bell ding dong AC 230 volt single pole ccomplete all as specified and as directed.
155	Supply and fixing Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified and as directed.
156	Supply and fixing Modularsocket 5 pin 6 &16 Amps, combination type2 module complete all as specified.
157	Supply and fixing Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified.
158	Supply and fixing ceiling rose,3 phase/PVC/ polycarbonate, isolated boday complete all as specified and as directed.
159	Supply and fixing Lamp holder including LED bulb 9 W and flexible wire 0.5 Sqmm copper cable complete all as specified and as directed.
160	Supply and fixing in replacement of unsv bldg security light with new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket of 20 mm bore light grade GI pipe bend to shape, MS clampfabricated out of 50x5 mm flat iron of required size and PVC1.5 Sqmm twin core cable from ceiling rose to light fittings complete all as specified and as directed.
161	Supply and fixingin replacement of Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable complete all as specified and as directed.
162	Material and labour for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earthIncluding taking out/down existing unserviceable sub main wiring all as specified and directed. Notes:- (A) 2(two) Runs of 6.00 Sqmm Copper conductor cable,1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit.(B) Rate quoted for this items shall be inclusive of the cost of following:- (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth.(iii)taking out/down existing unserviceable sub main wiring.
163	Supply and fixingin replacement of MCCB, 4 Pole, 100 A, 25 KA for fixing in DB including proper thimble connection, thermal and magnetic release protectioncomplete all as specified and directed by Engineer-in-charge.
164	Supply and fixing in replacement of epoxy power coated MCCBdistribution box double door VTPN 4 way vertical type AC 415 V with IP 54 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and as directed. Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimblesused for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(iii) connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size.
165	Supply and fixing in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs areto be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link allflush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specifiedand as directed.
166	Supply and fixingin replacement ofMCB , SPN B curve, 240 Volts ,32-40 amp for fixing in DBs including proper thimble connections complete all as specified and as directed.
167	Supply and fixingin replacement of MCB, single pole C curve 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and as directed.
168	Material and labour for replacement of UNSV Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497 complete all as specified and as directed..
169	Supply and fixing Tube light fitting Self Ballasted LED Batten, Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity, 20 watt,4 ft long including 3 core flexible wire 0.5 sqmm copper cable complete all as specified and as directed.
170	Supply and fixing elegatly designed sleek surface mounted pressure die-cast aluminiumLEDluminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existingcomplete all as specified and as directed.
171	Supply and fixing Exhaust fan AC single phase 230/240 V of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louvers and makethe surface good to match the existing surface complete all as specified and as directed.
172	Supply and fixing Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body,high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louvers and make the surface good to match the existing surface complete all as specified and as directed.
173	Supply and fixing/layingXLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core and connection with appropriate size of Al thimble including taking out/down unsv cable complete all as specified and as directed.
174	Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and as directed.
175	Returning filling in including spreading, levelling and well ramming in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and as directed.
176	Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding1.5 mtr above the starting point complete all as specified and as directed..
177	Material and labour forsand cushioning for protection of underground cable using dry fine river sand laid in trenches8 cm before laying the cable and 15 cm after laying the cable including spreading, leveling, well ramming completed all as specified and as directed.Note:- Only punned depth will be measured for payment
178	Material and labour for Cutting the hardstanding, floor/wall of any thickness, description and in any location for laying of cable including making the surface good using cement concreteto match with the existing suface complete all as specified and as directed.
179	Material and labour for Boring of holes under road, pavement, hard standing by trench-less technology using ultrasound technique and necessary machine suitable to pass through 40 to 80 mm boreGItubing and cable etc complete all as specified and as directed.Note: GI pipe shall be measured and paid seperately under relevant item of this schedule.
180	Supplying and laying factory made unreinforced Precast concrete cable coversclass LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as specified and as directed.
181	Material and labour for replacement of GI tubing light grade 40 mm borefor passing through cables under the floor,along the wall or along the pole complete all as specified and directed.
182	Taking down and refixing of ceiling fan of any sweep after overhauling, replacement of capacitor and capacitor stand,cleaning and painting with spray painting machine using synthetic enamel paint and writing serial No/MES NO with synthetic enamel paint of coluor and size of words as directed by Enginner-in-charge complete all as specified and as directed. Note:-The cost of supply & fixing of celing fan box round cover plate is included in the unit rate quoted by contractor.
183	Taking down and refixing of ceiling fan any sweep after rewinding ,replacement of bearing, capacitor and capacitor stand,cleaning and painting with spray painting machine using synthetic enamel paint and writing serial No/MES NO with synthetic enamel paint of coluor and size of words as directed by Enginner-in-chargecomplete all as specified and as directed.Note:-The cost of supply & fixing of celing fan box round cover plate is included in the unit rate quoted by contractor.
184	supply and fixing PVC Meter Box of (250mm x 220 mm x 140 mm) size for single phase LT meter. with front openable door fixed with transparent glass for visibility of meter reading fixed on wall with suitable arrangemnets.and making good the disturbed surface of wall to match the existingsurface.NOTE:-To fix the meter box required disconnecting and refixing of connections of sub main shall be included in quoted rate.
185	Supply and fixingsingle pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.
186	Material and labour for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire including taking down the existing unsv sub main wiring complete all as specified and as directed. Notes :-(1). 2 Runsof 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Runof 4.00 Sqmm Copper conductor Earth wire shall be measured as one unit) (2) Rate quoted for this items shall be inclusive of the cost of:-(i) Rigid non-metallic PVC conduit of 25 mm dia withtees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc.10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.
187	Supply and fixing ElectricWater heater (Geyser) storage typeof capacity 25 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum&high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality PVC connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and as dirceted.
188	Material and labour for making hole in brick wall built in cement mortar of suitable size for exhaust fan of250/300 mm sweep including grouting nuts etc and making good the surface to match the existing surface complete all as specified and as directed.Note:-The Cost of cement work, plastering,painting etc shall included in the quoted rate of this item.
189	Supply and fixingmetal flush box of 1/2 module complete all as specified and as directed.
190	Supply and fixing metal flush box of 3 module complete all as specified and as directed.
191	Supply and fixingmetal flush box of 6 module complete all as specified and as directed.
192	Supply and fixing metal flush box of 8 module complete all as specified and directed.
193	Supply and fixingmodular cover plate of 1 module with frame complete all as specified and directed.
194	Supply and fixing modular cover plate of 2 module with frame complete all as specified and as directed.
195	Supply and fixing modular cover plate of 3 module with frame complete all as specified and as directed.
196	Supply and fixing modular cover plate of 6 module with framecomplete all as specified and as directed.
197	Supply and fixingmodular cover plate of 8 module with frame complete all as specified and as directed.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Punjab Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair To Building No P-29, (273 To 280) P-112, (01To 08), P-113 (01 To 08) Total 24 Qtrs In Kse Enclave At Patiala, Patiala-Punjab

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair To Building No P-29, (273 To 280) P-112, (01To 08), P-113 (01 To 08) Total 24 Qtrs In Kse Enclave At Patiala, Patiala-Punjab

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us