|
| 1 | Dismantling and removing brick or stone masonry in cement mortar including stacking the useful materials for reuse and removing the debris away from works site with all leads and lifts as per direction of Engineer-in-charge |
| 2 | Removing of cement plaster from walls including racking out joint to 12mm deep and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge |
| 3 | Earth work excavation for plinth and foundation in ordinary soil within 50mtrs initial lead and 1.5 mtrs initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.30 mtrs in depth as per direction of Engineer-in-charge |
| 4 | Supply and filling in foundation and plinth with sand watered and rammed including the cost, conveyance, royalty, all other taxes and labour charges etc complete |
| 5 | Cement concrete (1:3:6) with 4cm size hard granite metal including the cost, conveyance, royalty, all other taxes and labour charges etc complete |
| 6 | First class fly ash brick masonry in cement mortar (1:4) using fly ash brick having crushing strength not less than 75Kg/Cm2 with dimensional tolerance of +/-8% after immersing the bricks in water for six hours before using foundation and plinth including hoisting, placing in position, watering, curing to required time etc including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete as per direction of Engineer-in-charge |
| 7 | 20mm thick cement plaster (1:4) in finished smooth to inside / outside rough surface of walls after racking out the joints including watering to required time, cost |
| 8 | Cement concrete (1:2:4) with 12mm size hard granite chips including the cost, conveyance, royalty, all other taxes and labour charges etc complete |
| 9 | Iron work wrought and put up in trusses and record racks |
| 10 | Hoisting joists and trusses and placing in position (Labour only) |
| 11 | Priming one coat with any approved primer on iron work after cleaning the surface, sand papering etc including cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P require for the work complete as per direction of Engineer-in-charge |
| 12 | Painting two coats any approved shade of paint on new iron work after cleaning the surface, sand papering etc including cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P required for the work complete as per direction of Engineer-in-charge |
| 13 | Providing and fixing GCI sheet 0.5mm in roof drilling hole in wind ties including fixing of ridges, valleys, wind ties etc including cost of fittings |
| 14 | Priming one coat with any approved primer (water based) on plastered surface after cleaning the surface, and papering etc including cost, conveyance, royalties, taxes of all materials, cost of all labour with T&P required for the work complete as per direction of Engineer-in-charge |
| 15 | Wall painting two coats with weather seal coat paint of any approved shade over the exterior surface of walls including cost, conveyance, royalties, taxes of all materials, cost of labour with T&P required for the work complete as per direction of Engineer-in-charge |
| 16 | Fixing chequered tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slurry mixed with pigment to mach the shades of the tiles including rubbing and polishing complete, including cost of materials, conveyance, royalty, taxes and cost of labour with T&P required etc complete as per direction of Engineer-in-charge Please Enable Macros to View BoQ information |
