Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed. |
| 2 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters(without taking off shutters from the frames) all as specified and directed |
| 3 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. |
| 5 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/ chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed |
| 6 | M&L for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including full width beading all around fixed with glue & nail complete all as specified and directed |
| 7 | S&F 2nd class hardwood glazed skeleton shutters 35 mm thick open rebated and prepared to receive gauge etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers complete all as specified and directed. |
| 8 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. |
| 9 | S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engr-in-Charge. Note : stainless steel butt hinges shall be paid separately |
| 10 | S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.0 mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charge |
| 11 | S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.0 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one No of locking arrangement two Nos Handle etc and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer all as per Godrej pattern complete all as specified and directed by Engr-in-chargeNote : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion)(ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same |
| 12 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification sand as directed |
| 13 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing |
| 14 | Dismantling of boarding any description fixed in any position with nails complete all as specified |
| 15 | M&L for 18/19 mm thick both sideprelaminated (One side decorative and one side plain) particle board exterior grade fixed with screws to timber frame work complete all as specified |
| 16 | M&L forPlain fillets or beading of sectional area exc3 & n.exc 6sq.cm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar worksput together with glue pinned at joints incomplete all as specified and directed by Engr-in-Charge |
| 17 | M&L for softwood Moulding as in cornices, picture rails and the like Not exceeding 6 sqcm complete all as specified and directed |
| 18 | S&F 100 mm long, Stainless Steel hinges with stainless steel screws complete all as specified and directed |
| 19 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type board of size 18-20 mm thick for kitchen cabinets, drawers, shelves etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with M&L stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. |
| 20 | S&Fin repair 30mm width Continuous (piano) hinges, mild steel, bright finish or electro galvanised all as specified |
| 21 | S&F 150mm long SS decorative handle including necessary screw and fittings complete all as specified and directed. |
| 22 | S&F Magnetic Catcher of size 50 mm fixed with screws complete all as directed. |
| 23 | S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed. |
| 24 | S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed. |
| 25 | S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed. |
| 26 | S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete. |
| 27 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified |
| 28 | S&F double legged door stopper of aluminium alloy body ,anodised with rubber shoe all as specified, |
| 29 | S&FAluminium powder coated frame for doors, window with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minimum thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangements to fix guard bars and S&F of PVC sleeves for guard bars. Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engr-in-Charge.Note: Guard Bars shall be measured and paid for separately |
| 30 | M&L for providing and fixing stainless steel (Grade 304) in Window Grill / S case grill made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the Grill with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size as Specified and Directed by Engr-in -Charge |
| 31 | S&F Aluminium powder coated window(glazed and gauzed both),side hung type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws, aluminium fitting such as peg stays 150mm long (01 No) for each shutter, hinges type B-21 100mm long (02 Nos) suitable handle (01 No)with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.Note: Only Glass and wiremesh will be measured and paid separately |
| 32 | S&F Eye door viewer (magic eye) of size 25mm dia fixed in position for door shutters complete all as specified and directed |
| 33 | S&F of Door Seal (brush type) of length exc 800mm and n.exc 1000mm, width not less than 38mm Including Brush fixed with screws complete all as specified and directed |
| 34 | S&F Stainlesssteel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.40mm and fixed etc., complete all as specified |
| 35 | M&L for sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified |
| 36 | All as per Srl item No. 35.00 here-in-before but pin head type, figuredglass |
| 37 | M&L for sheet glass in repair ordinary quality 4 mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified |
| 38 | S&F Framed work such as grills, gratings cooler stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified |
| 39 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer andtwo coats of synthetic enamel paint (for steel surfaces) including preparation of surface complete all as specified. |
| 40 | M&L for preparation of old painted surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 41 | S&F Mild steel 1.25 mm , plain, sheet in Mild steel sheet cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required and directed by Eng-in-Charge |
| 42 | M&L for two coats of synthetic enameled paint over a coat of red oxide primer on steel surfaces, n.exc 10cm in width or girth including preparation of the surfaces complete all as specified and directed |
| 43 | M&L for preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 44 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified |
| 45 | S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, (400 X400 mm) as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- Charge |
| 46 | S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, (600 X 600 mm)as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- Charge |
| 47 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm,(600 X600mm) cut to reqd size and shape as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/ wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premisescomplete all as specified |
| 49 | S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4on other than fair face of brick work. (Highlighter shall be provided as directed by Engr-in-Charge) |
| 50 | Dismantling stone slabsof any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified |
| 51 | M&L for Granite (of any type) work 15 to 17 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified |
| 52 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified |
| 53 | M&L for machine cut kota stone slab flooring, cills20-25mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (single piece of Kota stone to be fixed in stair treads) complete all as specified and directed |
| 54 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (single piece of Kota stone to be fixed in stair risers) complete all as specified and directed |
| 55 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 56 | Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under :-(a) Cleaning of sunken portion and roughening to receive treatment.(b) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces(Note : WPC shall be measured and paid separately)(c) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer.(d) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation.(e) Applying second coat of chemical Pidifin 2K (Dr Fixit) / equivalent @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.Note: The plan area of floor shall be considered for payment |
| 57 | M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified and directed |
| 58 | M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate) with WPC under floor over sunken complete all as specified and directedNote : WPC will be measured and paid separately. (WPC will conforms to IS: 2645-2003) |
| 59 | M&L for 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified |
| 60 | M&L for PCC (1:3:6) type C-2 (using 40mm graded aggregate) 75mm thick as in plinth protection including making grooves complete all as specified and directed |
| 61 | Demolition of RCC of any description such chajja, shelves etc and in any position not otherwise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition) |
| 62 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm garaged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified |
| 63 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified |
| 64 | Use and waste of form work to rough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified |
| 65 | Taking up or down GI tubing 15/20 mm bore pipe including or removal to store complete all as specified |
| 66 | Taking up or down GI tubing 25 mm bore pipe including or removal to store complete all as specified |
| 67 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and all other fittings required except given in item number 70, 71, 72 & 73 on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified. bore of pipe 20mm complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified. |
| 69 | S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified. |
| 70 | S&F of 20 mm inner diaCPVC Brass Male/ Female Brass Threaded Adaptor fittings complete all as specified. |
| 71 | S&F of 20 mm inner dia CPVC Brass Elbow fittings complete all as specified |
| 72 | S&F of 20 mm inner dia CPVC Brass Tfittings complete all as specified |
| 73 | S&F of 20 mm inner dia CPVC Brass Unionfittings complete all as specified |
| 74 | S&F in repair Rotational moulded polythylene 500 capacity waterstorage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. & dismantling of old water tank complete all asspecified |
| 75 | S&F in repair Rotational moulded polythylene 1000 capacity waterstorage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. & dismantling of old water tank complete all asspecified |
| 76 | S&F in repairs 20mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 77 | S&F in repairs 25 mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 78 | S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. |
| 79 | S&F Brass CPBasin mixer/wall mixer/sink mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed. |
| 80 | S&F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed |
| 81 | S&F in repair 15 mm bore chromium plated stop valve of cast copper alloy with long shank and cup (concealed type) ends for iron pipe or for unions and fixed all as specified and directed |
| 82 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified |
| 83 | S&F stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified. |
| 84 | S&F sinks Without Drainage Board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 85 | S&F in repair vitreous china wash basins, size 550x400mm white flat back with full pedestal including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified |
| 86 | S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to anti-syphonage pipe etc including making good to floor complete all as specified |
| 87 | S&F in repairs vitreous China 1st quality one piece wash down water closet wall hung EWC including all fittings, cistern etc complete all as specified |
| 88 | S&F PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make all as specified |
| 89 | S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed |
| 90 | S&F in repair 600mm x 450mm bevelled edge mirror 6mm thick of selected quality glass mounted fixed to wall with SS spacer 25mm size complete all as specified. |
| 91 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified. |
| 92 | S&F Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 93 | S&F PTMT soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. |
| 94 | S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed. |
| 95 | M&L for 25mm dia Stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be included in the quoted rate.Nothing extra shall be paid on this account |
| 96 | Taking down rain water pipe and eaves gutters(any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 97 | S&F 110 mm bore of pipe PVC (SWR) pipes heavy grade single socket in any length with rubber ring joint laid in floor/trench or fixed to walls with and including double side suspension clamps (DSS) of make Shaivi or equivalent in other brand of size 25mm x 1.5 mm made of galvanised carbon steel andhaving noise absorbing silicon rubber sleeve, Clamps to be fixed to wall with anchor fastner with nut and washer and full threaded bar off size M 10. Distance of two clamps should not be more than 1.00 m complete all as specified and directed. |
| 98 | S&F 75 mm bore of pipe PVC (SWR) pipes heavy grade single socket in any length with rubber ring joint laid in floor/trench or fixed to walls with and including double side suspension clamps (DSS) of make Shaivi or equivalent in other brand of size 25mm x 1.5 mm made of galvanised carbon steel andhaving noise absorbing silicon rubber sleeve, Clamps to be fixed to wall with anchor fastner with nut and washer and full threaded bar off size M 10. Distance of two clamps should not be more than 1.00 m complete all as specified and directed. |
| 99 | S&F 110 mm bore of pipe PVC (SWR) pipes heavy grade single socket in any length with rubber ring joint laid in floor complete all as specified and directed. |
| 100 | S&F 75 mm bore of pipe PVC (SWR) pipes heavy grade single socket in any length with rubber ring jointlaid in floor with MS clamps complete all as specified and directed. |
| 101 | S&F 110 mm bore of pipe PVC (SWR) bends heavy grade of any radius / shoefixed to PVC pipes complete all as specified and directed |
| 102 | S&F 75 mm bore of pipe PVC (SWR) bends heavy grade of any radius / shoefixed to PVC pipes complete all as specified and directed |
| 103 | M&L for PVC (SWR) \"P’ trap 110mm diaheavy grade completeall as specified. |
| 104 | M&L for PVC (SWR) \"S’ trap 110mm diaheavy grade completeall as specified. |
| 105 | M&L for 75mm dia of long body PVC Floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified |
| 106 | M&L for PVC (SWR) branch piece, single (single Y), 75 mm bore, (equal or unequal),complete all as specified and directed by Engr-in-Charge |
| 107 | M&L for PVC (SWR) branch piece, single (single Y), 100 mm bore, (equal or unequal),complete all as specified and directed by Engr-in-Charge |
| 108 | M&L for PVC (SWR) junction single, (Single T), 75 mm bore, (equal or unequal), ordinary or inverted (spigot or socket type) or with oval access door as in repairs complete all as specified and directed by Engr-in-Charge |
| 109 | M&L for PVC (SWR) junction single,(Single T), 100 mm bore, (equal or unequal), ordinary or inverted (spigot or socket type) or with oval access door as in repairs complete all as specified and directed by Engr-in-Charge |
| 110 | S&F in repairs PVC (SWR) vent cowl 100 mm complete all as specified and directed |
| 111 | S&F Salt-glazed stoneware gully traps 150x 150 mm , square or round mouthed, type \"P complete all as specified |
| 112 | Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified |
| 113 | M&L for rendering 10mm thick in cement mortar1:6 on other than fare face of brick work or concrete surfaces complete all as specified |
| 114 | M&L for rendering 10mm thick in cement mortar1:6 on other than fare face of brick work or concrete surfaces even and smooth without using extra cement complete all as specified |
| 115 | M&L for rendering 15mm thickin cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smooth without using extra cement & with using integral water proofing compound complete all as specifiedNote : WPC shall be measured and paid for separately |
| 116 | M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling all as specified and as directed. |
| 117 | Chipping of loose/ damaged / cracked / previously repaired/ delaminated or weak concrete by chieseling to expose the sound core concrete where ever required and to expose rusted reinforcement upto depth n.exc 50mm and disposal of rubbish off the premises to a distance not exc 50 mtrs including cleaning of reinforced concrete surface by air compressor complete all as specified and directed. |
| 118 | Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using Product : Rustoff-100 of Sika or equivalent make in Fosroc / Thermax as approved by GE, with density : 1.01 Kg/ltr at 30°C and consumption : 0.2 kg/Sqm/coat complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar |
| 119 | Supply and apply cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and product requirements: carbonation resistance : 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N/Sqmm according to ASTM C 882-78 complete all as specified and directed.Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar. |
| 120 | M&L for Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer’s specification including preparation of surface thoroughly and cleaning complete where ever required with using Product : Sikadur(R)-32 LP of Sika or equivalent in Fosroc /Thermax as approved by GE with consumption : 0.4 kg/Sqm and Product requirements : Comp with ASTM C 881-78, Type II Grade 2 Class B+C complete all as specified and directed |
| 121 | M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer\"s instructions complete all as specified and directed. |
| 122 | M&L for Acrylic polymer base damp-proof coating system with two component ready to use acrylic ploymer modified damp-proof coating :1. SURFACE PREPARATION: Remove the existing plastered surface with efflorescence/ seepage area. Non-moving cracks having width upto 5 mm must be filled with Polymer based crack filler.2 APPLICATION: Apply acrylic polymer base damp proof coating by brush roller over SSD surface. Apply the first coat of damp proof coating with a paintbrush directly on the surfaces. Allow to dry for a minimum 2-3 hrs. Apply subsequent second layer after drying. The first coat and second coat must be applied in perpendicular direction. The coverage must be at least 1.2 sqm/kg/coat. The mixing for two component, if required, shall be done as per manufactures specifications. Rendering to be carried out after approval of Engr-in-Charge and shall be paid separately.Make : Asian Paints Damp proof Ultra 2K/Fosroc Damp Protect/Dr Fixit dampguardNote : Treatment shall be carried out through Authorized applicators only |
| 123 | Supply only liquid water proofing compound all as specified |
| 124 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over two coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr-in-Charge |
| 125 | M&L for complete removal of existing treatment ofold decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and filling in depressions to make smooth surface and applying two coat of distemper oil emulsion white/tinted using hand roller complete over two coat of wall care putty all as specified |
| 126 | M&L for preparation of newly plastered or unplastered surfaces of ceiling and applying two coat of distemper oil emulsion white/tinted over coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr-in-Charge |
| 127 | M&L for complete removal of existing treatment ofold decorated surfaces of ceiling by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and filling in depressions to make smooth surface and applying two coat of distemper oil emulsion white/tinted over coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr -in - charge. |
| 128 | M&L for preparation of newly plastered or unplastered surfaces of wall, soffits/ facia of chajja/ roof slab for applying Two coat of Acrylic Smooth exterior paint of required shade over and including one coat of exterior primer and one coat of exterior wall care putty complete all as specified |
| 129 | M&L for complete removal of existing treatment ofold decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots including filling depression of scraped surface with wall putty two coats 1.5 mm thick each and Finishing walls with Two coat of Acrylic Smooth exterior paint of required shade over and including one coat of of exterior primer complete all as specified |
| 130 | M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified |
| 131 | Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engr-in-Charge |
| 132 | M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc. complete all as specified and directed by Engr-in-Charge |
| 133 | All as per Srl item No 132.00 here-in-before but except bricks |
| 134 | M&L for 100 mm thick Cement concrete 1:4:8, type D- 2 (using 40mm graded aggregate) in sub base, floors etc complete all as specified and directed |
| 135 | Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out soft soil complete all as specified |
| 136 | M&L for Machine pressed Precast cement concrete interlocking coloured (glossy finished / ruberised paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with and including 40mm thick sand cushioning complete all as specified and directed by Engr-in-Charge |
| 137 | Dismantling of depressed precast concrete interlocking paver block of any shape and size and refixing the serviceable paver blocksand removing the unserviceable paver blocks from the site to a distance n.exc 500 metres complete all asspecified and directed. |
| 138 | M&L for providing and fixing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate asin Kerb Stone of any section indicated with plain fair faces including chamfers weatherings throughting etcand settingin CM (1:4) complete with joints to matchall as specified and directed by Engr-in-Charge. |
| 139 | M&L for Preparation of new concrete surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint including priming paints complete all as specified. |
| 140 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified |
| 141 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying cables/poles foundation / stay assembly and getting out in soft/loosse soilall as specified and directed. |
| 142 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified |
| 143 | Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified |
| 144 | Demolition and breaking up drain pipes 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified |
| 145 | M&L for 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified. |
| 146 | M&L for 150mm bore Concrete bed (PCC 1:3:6 type C2)to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified |
| 147 | S&F in repairSFRC (Steel fibre Reinforcement concrete cover & frame ) HD-20mm, conforming to IS-12592, graded rectangular clear opening 560X560mmand fixed over manholeand make good of manhole complete all as specified and directed |
| 148 | S&F in Repair Precast Cement Concrete ( type B0 1:2:4 using 12.5mm graded stone aggregate) as in louvres and jallies , 35mm thick set in CM 1:4 all as specified and directed by Engr-in-Charge |
| 149 | M&L for preparation of newly plastered surfaces of concrete and applying two coat of synthetic enamel paint complete all as specified |
| 150 | Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified. |
| 151 | Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed. |
| 152 | M&L for PCC 1:2:4 type C-0 (using 12 mm graded aggregate) as in roof kerbs complete all as specified and directed by Engr-in-Charge |
| 153 | M&L 50mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) with WPCin roof complete all as specified and directedNote : WPC will be measured and paid separately. (WPC will conforms to IS: 2645-2003). |
| 154 | M&L for Roof Treatmentas specified below and as directed : (a) Cleaning, washing of surface completely with high speed water jet. Surface should be free from any loose paint, dust or grease. (b)Rendering 10 mm thick in cement plaster 1:4 withWPC on roof (c)All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars.(d)Applying one coat of PrimeSeal/ Epoxy Primer/ShaliUrethane BTD White diluted with potable water in the ratio of 1:1 and apply @ 0.40 kg/ sqm (0.20 kg BTD+0.20 Kg water) (e)Laying polyster reinforced fiber net/50 gsm Geotextile mesh, upto 300 mm on walls. (f)Applying three coat of HydroShield PUD micro-fibre reinforced UV resistant polyurethane (solid content 68% ) / Damp Proof ultra UVStable fibre reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers (Solid content 55%)/ SmartCare PU Magnum elastomeric waterproofing coating based on hydrophobic polyurethane (solid content 85%)/Single Component Elastomeric Liquid Membrane ShaliUrethane BTD White/coloured(Elongation 400% ± 50, Solid Contents > 80% & Specific Gravity @ 30 OC 1.5 ± 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm,with paint brush/ roller upto 300 mm on walls. (g)The complete treatment to be carried out by authorised applicator of waterproofing manufacturer.Make : DrFixit/ Asian/STP Note : (i)The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer-in-Charge.(ii)The plan area of floor shall be considered for payment |
| 155 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.all as specified and directed. |
| 156 | M&L for point wiring complete with ISI marked 1.5 Sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multi-stranded copper conductor drawn through concealed in wall/roof/ceiling surface in existingPVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of modular switches, sockets, fan regulator etc covered with modular cover plate of required sizefixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer includingfixing and 1.5 Sqmm copper conductor as earth continuity to connect common earth dolly completed for One light point/ Fan point/ Exhaust point controlled byone way switch all as specified and as directed |
| 157 | All as per Srl Item No. 156.00 here-in-before but One light point controlled by one two way switch |
| 158 | All as per Srl Item No. 156.00 here-in-before but One three pin socket out let 5 amps on the same board with other switches |
| 159 | All as per Srl Item No. 156.00 here-in-before but One 3 pin, 5A switch socket outlet point on independent board |
| 160 | All as per Srl Item No. 156.00 here-in-before but One bell point controlled by one bell push |
| 161 | All as per Srl Item No. 156.00 here-in-before butwith 2.5 sqmm cable for 1No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor. |
| 162 | S&FPVC Lamp holder suitable for LED 5 to 20 watt bulb complete all as specified and directed |
| 163 | S&FLED bulb 1x10 Watt lamp having luminous efficacy not less than 90 lumens /watt complete all as per specified & directed |
| 164 | S&F LED tube light fitting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge |
| 165 | S&F LED tube light fitting 10W, (2 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size all as per specification and directed by Engineer-in-Charge |
| 166 | M&L for ceiling rose 3 terminal/ PVC/ polycarbonate isolated body all as per specified and directed by Engineer-in-Charge |
| 167 | M&L for submain wiring with two single core PVC FRLSinsulatedcopper conductor 6 sqmm and same 6 sqmm for continuous earth wire drawn in to existing concealed PVC conduit complete all as specified and directed. Note: Cost of earth wire including in sub main wiring |
| 168 | S&F Modular switch 1 way 6 amps one moduleswitch all as specified and directed. |
| 169 | S&F Modular socket 6A 2/3 pin, 2 modulesocket all as specified and directed. |
| 170 | S&F Modular switch 1 way 16 amps 1 moduleswitch all as specified and directed. |
| 171 | S&F Modular socket 6A / 16A - 2/3 pin, 2 moduleall as specified and directed. |
| 172 | S&F Modular switch 2 way 6 amps one module all as specified and directed. |
| 173 | S&F Modular switch bell push 6 amps one module all as specified and directed. |
| 174 | S&F Bell ding dong AC 230V single pole complete all as specified and directed . |
| 175 | S&F in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB/MCB, conforming to IS-13032, DB shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessary complete all as specified and directed by Engineer-in-Charge.Note :- MCCB/MCB shall be measured and paid separately under appropriate item of BOQ |
| 176 | S&F sheet metal enclosure for DB\"s SPN 230 volts 12 waydouble door complete all as specified and directed. |
| 177 | S&F MCCB 4 pole, 415 V. adjustable type, 63 Amps with breaking capacity 16 KAcomplete all as specified and directed. |
| 178 | S&F amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of SPN 40 AMP and current carrying capacity in the MCB DB complete with connection all as specified and directed. |
| 179 | S&F 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection all as specified and directed. |
| 180 | S&F 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection all as specified and directed. |
| 181 | M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15mm dia upto earthing test point / equipment fixed with 2 Nos. of mild steel clamps made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 including taking down old Unserviceable earthing any type complete all as specified and directed by Engineer-in-Charge.Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber. (ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is included in this item.(iii) Water pipe shall be provided in slanting position |
| 182 | Supply and spread dry fine aggregate sand in trenches for cable cushioning all as specified onboth top and bottom of cable including ramming all as specified and directed.Note :For the purpose of payment the punned thickness only measured. |
| 183 | Supplying and laying factory made un-reinforced precast concrete cable cover, class EHV, type 1 with peak, size 250mmx 150mm x 40mm standard size laid in trenches of across the cable protection all as specified and directed. |
| 184 | Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs and including taking up defective unserviceable cable of the any sizes all as specified and directed. Note: Earth work, Sand cushioning, GI pipe and cable cover for protection to be measured and paid separately. |
| 185 | S&F in replacement energy efficient LED Security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass,better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications, including taking down old Unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt.(b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95(e) THD : Max10%.(f) IP rating : IP66. (g) IK rating:Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire.(j) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI: Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) |
| 186 | Supply and laying steel water Tubing, 25 mm dia ISI Marked, \"“Medium grade\" galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road including taking down old Unserviceable pipe any type with all fitting complete all as specified |
| 187 | M&L for Gun-metal, globe or gate valves, 25 mm bore of pipe with iron wheel head, screwed both ends for iron pipe and fixedincluding taking down old Unserviceable gate valve any type complete all as specified |
| 188 | Supply and laying steel water Tubing, 40 mm dia ISI Marked, \"“light grade\" galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting including taking down old Unserviceable pipe any type complete all as specified |
| 189 | S&F complete set of 1x10 watt LED retrofit type bulkhead fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover with specially designed gasket lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable sizeincluding taking down old Unserviceable light fitting any type as per specification & directed. |
| 190 | S&F ceiling fans complete with blades, down rods, Remote and accessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed. |
| 191 | Supplying, fixingand commissioning of electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V , single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostat, NRV, connection piece PVC connection for Hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable including15 Amp plug suitable for existing socket and fixing material, 04 no Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed |
| 192 | Re-Fixing only electronic/electric meter single phase complete with accessories any size. two core copper flexible wire not less than 0.5 mtr for connecting from incoming to outgoing any size complete all as specified and directed. |
| 193 | S&F exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. |
| 194 | Re-Fixing only Exhaust fans complete with accessories any size. Three core copper flexible wire not less than 0.5 mtr for connecting from ceiling rose/connector to exhaust fanany size complete all as specified and directed. |
| 195 | M&L submain wiring with two single core PVC FRLSinsulatedstranded copper conductor cable of size 4 sqmm and same 4 sqmm for continuous earth wire drawn in to concealed PVC conduit and making good to disturbed area complete all as specified and directed .Note: Cost of PVC conduit, conduit accessories and earth wire including in sub main wiring |
| 196 | S & F DBOXx SRCD (Socket Residual Current Device) is ready plug & play all -in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults Single polecomplete with one SPN MCB 20 Amps, 240 V, AC supply, and plug top all type as specified and directed. |
| 197 | Supply and laying Rigid non-metallic PVC conduit size 25 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. with all fitting including taking down old Unserviceable pipe any type complete all as specified. |
| 198 | Supply and laying Rigid non-metallic PVC conduit size 20 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. with all fitting including taking down old Unserviceable pipe any type complete all as specified. |
| 199 | M&L for Cutting chases in bricks wall /PCC walls for taking out blocked concealed conduit and making goodto surface in cement mortar 1:3 and with finish to match the existing surface complete all as specified and directed |
| 200 | S&F wall mounted polycarbonate decorative light with lamp holder complete all as specified and directed.Note :-A Sum of Rs. 64,242.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 57 (Schedule of credit) of Tender Documents. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
