|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 3 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc to store and rubbish not exc. 50m all as specified and directed. |
| 4 | M&L for 18 to 20 mm thick granite stone slab (any type) (table rubbed and polished) as in steps, jambs, pillars, window & door cills, cooking platforms, co+unter, shelves and like in cement mortar (1:4) over and including 15 mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the edges bullnosed complete all as specified and directed. |
| 5 | Labour only for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 6 | M&L for 50mm thick s and stone slabs in sun-shades, chajjas,shelves, cills, landings, cover stones, templates, platform bases etc.n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified and directed. |
| 7 | M&L for premium double charge glossy finish vitrified tiles 9-10mm thick (area of each tiles n exc 1 sqm each) in floors and skirting set and jointed in neat cement slurry and over and including screed bed 15mm in CM (1:4) and pointed with epoxy filling of approved make and color including dismantling of old tiling fixed in any mortar and position all as specified and directed. |
| 8 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exc 0.36sqm) joint free as in floors set and jointed in neat cement slurry over and icluding screed bed 15mm in CM (1:4) and pointed in white or coloured cement to match with shade of tiles including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 9 | M&L for glazed ceramic colour tiles with matching highlighter in vertical surfaces ( design and pattern as approved ) of size not less than 600x300x 7-8mmthick set and jointed in neat cement slurry fixed over and including 10mm thick rendering in CM (1:4) as in backing coat and pointed in white cement including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 10 | M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed |
| 11 | M&L for modular size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 12 | M&L for modular size brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in built inin cement mortar 1:4 complete all as specified and as directed. |
| 13 | Taking out carefully existing rubber floor sheeting and refixing at same location after necessary repairs of floor base with and including suitable adhesive as per manufacturer\"s instruction as directed by Engr-in-charge all as specified and as directed. |
| 14 | M&L for rendering 15 mm thick on concrete surfaces or brick masonry surfaces in CM 1:4finished even and fair and finishing top surface as setting coat with cement slurry 3mm thick trovelled to even and smooth in cement plaster 1:2 including taking down old plaster from brick or concrete surface and raking out joints complete all as specified and as directed. |
| 15 | M&L for rendering 10 mm thick on other than fair face of brick work or concrete surfaces or brick masonry surfaces in CM 1:6finished even and smooth without using extra cement including taking down old plaster from brick or concrete surface and raking out joints complete all as specified and directed. |
| 16 | M&L for rendering 10 mm thick on other than fair face of brick work or concrete surfaces or brick masonry surfaces in CM 1:6finished even and smooth without using extra cement including taking down old plaster from brick or concrete surface and raking out jointscomplete all as specified. |
| 17 | M&L for 15 mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces, finishing the surfaces even and smooth without using extra cement including mixing water proofing compound complete all as specified and directed. Note: WPC will be measured and paid separately. |
| 18 | M&L for applying 1 mm thick wall care putty to be finished in two or more coats on walls all as specified and as directed. |
| 19 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 20 | M&L complete removalof old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured all as specified and directed by Engr-in-Charge. |
| 21 | M&L for preparation of newly plastered surface and applying two acrylic emulsion paint exterior alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of exterior primer all as specified and directed . |
| 22 | M&L for preparation of old plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion complete all as specified and directed. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 24 | S&F for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 incl dismantling of old structural steel complete all as specified and directed. |
| 25 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (precoated AZ 150 micron) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed |
| 26 | All as per ser item No 24.00 here-in-before in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)including dismantling of old sheets fixed at any location complete all as specified and directed |
| 27 | M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a cot of red oxide, zinc chrome primer complete all as specified and directed |
| 28 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 29 | S&F for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum with semi perforated) false ceiling tiles of 12 mm thick micro tegular fixed in frame size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS code, false ceiling GRG false ceiling 8225:1987, Non combustible as per BS tiles4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.50mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 3mm dia hanger wire upto 1200mm length and L-shapelevel adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws complete all as specified and directed. |
| 30 | M&L for solid pvc wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing and fixing at site including dismantling old PVC or wooden boarding, any description, fixed in any position with screws all as specified and directed |
| 31 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing. all as specified and directed |
| 32 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed. |
| 33 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 but n exc 4 sqm each complete all as specified and directed. |
| 34 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 4 but n exc 8 sqm each complete all as specified and directed. |
| 35 | S&F of 10mm thick oughned glass as in hinged doors, partitions automatic doors and similar workincluding cutting to shape, drilling holes required and necessary fixing withchrome finish fitting/ fixtures required complete all as specified and directed. |
| 36 | S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 37 | S&F of fancy type stainless steel body lock of premium quality/ approved make for glass door with two/three set of keys complete all as specified and directed. |
| 38 | S&F of stainless steel for 300mm long fancy H-type curve/ straight as required handle set made out of25mm dia stainless steel pipe fixed to toughned glass doors complete all as specified and directed. |
| 39 | M&L for double action, floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 40 | S&F of powder coated aluminium fabricated work as in shutters/frames for doors, windows/ vents, partition as per manufacturer instructions including necessary jointing cleats, anodised aluminium snap beading, neoprane rubber beading complete all as specified and as directed |
| 41 | S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket as required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc; aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws complete all as specified and directed.Note: Fittings shall be measured and paid for separately under respective item. |
| 42 | S&F 4mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 43 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 44 | &F of 25 mm dia stainless steel drapery/ curtain rod, min 2 mm thickness with fancy type stainless steel brackets/holders for hanging and fixing including taking down old rod with fittings complete all as specified and directed. |
| 45 | S&F of frameless moulded edge round shape looking mirror of dia 1.40m with chrome finish edge fixed on walls with suitable arrangement all as specifed and directed |
| 46 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required sizeincluding dismantling of old railing sections fixed at any locationand pattern complete all as specified and directed |
| 47 | M&L for first class hardwood for Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 48 | S&F for 35mm thick first class hard wood glazed and skeleton shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - (i) Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed. (ii) Glass willbe measured and paid separately. |
| 49 | S&F 5mm thick figured glass (approved design and textures), pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed |
| 50 | M&L for two or more coats on new works with french polishing on wood surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed. |
| 51 | S&F in repair vitreous china single piece WC With inbuilt cistern with UF soft close seat cover, hinges, dual flush cistern fittings and accessories set complete all as specified and as directed. |
| 52 | S&F in repair vitreous china over counter (table top) wash handbasin, white, oval or rectangle shape including PVC connection and CP waste coupling and PVC corrugated waste pipe upto floor trap level complete all as specified and as directed. |
| 53 | S&F in repairs vitreous china, urinal half stall type with fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement with brackets, flush pipe and union for discharge pipe, PTMT spreader and PTMT waste coupling 32mm & waste pipe, PVC Connection pipe 450mm for flushing complete all as specified and as directed. |
| 54 | S&F in repairs fancy type 15 mm bore CP pillar taps with long extension body (suitable for counter top WHB), screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 55 | S&F in repairs CP long body bib cock with wall flange 15mm bore complete all as specified and as directed |
| 56 | S&F in repairs 15mm dia CP stop valve/angle valve (min weight 550gms), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed |
| 57 | S&F in repairs stainless steel toilet paper holder with flap complete all as specified and directed. |
| 58 | S&F in repairs CP two way bib tap 15mm dia fixed in GI/ CPVC tubing all as specified and directed. |
| 59 | S&F in repairs tubular towel rail 450mm long including a pair of bracket with matching specification and size complete all as specified and as directed. |
| 60 | S&F swivel magnifying mirror of round shape fixed on wall with SS screws complete all as specified and as directed. |
| 61 | S&F in repair health faucet( ABS Body) suitable for 15mm dia pipe with 1.00m long flexible tube and ABS wall hook including making connections and fixd in position complete all as specified (Make: Jaquar) |
| 62 | S&F in repairs PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and as directed. |
| 63 | S&F of PTMT liquid soap dispenser, white color of standard size with necessary fixing screws complete all as specified and as directed. |
| 64 | S&F 5mm thick bevelled edged frameless looking mirror glass of selected quality in required size fixed with suitable SS stud/bracket on walls all as specified and directed |
| 65 | S&F of GI tubing Dia 15 mm dia \"medium weight\" and all fittings on walls / ceilings or Laying in floors incl taking down old water tubing fixed in any positions complete all as specified. |
| 66 | S&F of GI tubing,20 mm dia, medium grade and all fittings on walls / ceilings or laying in floors including taking down old water tubing fixed in any positions complete all as specified and directed. |
| 67 | Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and directed |
| 68 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) complete all as specified and directed. |
| 69 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid plain or moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and fixing with and including 100mm SS medium grade butt hinges (min 03 Nos) and full body threaded star headed counter sunk S.S screws and fixing in the frame at site all as specified and directed. |
| 70 | S&F for brass barrel tower bolts, with cast or sheet barrel and rolled of size 200mm all as specified and directed. |
| 71 | S&F for 125 mm size extruded brass handles, fabricated type polished,all as specified and directed. |
| 72 | S&F 200mm brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 73 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary fixing to walls complete all as specified and directed. |
| 74 | Dismantling boarding, any description, fixed in any position with screws etc complete complete all as specified and directed |
| 75 | M&L for 12 mm thick Plywood ( Nos of ply should not less than 7), grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed. |
| 76 | M&L for 0.9mm thick decorative laminate type 1 of surface finish (colour and pattern as approved) fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and directed. |
| 77 | S&F for 350mm long SS telescopic channel fixed in sliding drawer with necessary screws complete all as specified and directed |
| 78 | S&F stainless steel pressed handles 100 mm long, oval type, stove enamelled black fixed in kitchen/ almirah shutters and drawers complete all as specified and directed. |
| 79 | S&F second class hard wood plain fillet square retangular and triangluar in section, wrought secured with sectional area exc 13 but n exc 25 sqcm complete all as specified and directed |
| 80 | S&F brass drawer pulls, 4 screw plate with fixed dished pull, 80 mm to 100mm long complete all as specified and directed |
| 81 | S&F 75mm size hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 82 | S&F 30mm continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed |
| 83 | S&F magnetic catcherfor cabinets of size 50 mm long complete with striking plate & magnetic stud complete all as per approved sample complete all as specified and directed. |
| 84 | S&F 4 lever brass mortice lock, vertical type, size 100mm complete all as specified and directed. |
| 85 | S&F grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 86 | M&L for leakage repairs of GI corrugated roof sheet by injecting and sealing with sillicon gel in holes of sheets and wherever required upto satisfaction of Engr-in-charge. Note: Each of hole repaired/sealed will be considered as one repair item. |
| 87 | M&L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete including demolition of old concrete of any type and any position complete all as specified and directed. |
| 88 | M&L PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) as in plinth protectionincluding demolition of cement concrete in ground floor and paving n exc 15 cm thickness (below or above ground floor) and finished fair and even laid in bays and cutting of dummy joints 65mm deep x 10mm wide @ 3m intervals and at corners filled with bitumen mastic 1:3 complete all as specified and directed |
| 89 | S&F providing and laying 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 90 | S&F PVC (SWR) floor trap, plain with SS gratinghaving dia meter of out let 75mm including jointing with solvent cement complete all as specified & as directed. |
| 91 | Supply & fixing110 mm, PVC (SWR) pipes, single socketed in any length with rubber rings joints laid in trenches or in floors or walls inculding cutting outwall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 92 | Supply & fixing75 mm, PVC (SWR) pipes, single socketed in any length with rubber rings joints laid in trenches or in floors or walls inculding cutting outwall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 93 | S&F110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 94 | S&F75mmbore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 95 | S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and as directed. |
| 96 | S&F 75mm bore PVC (SWR) bends, any radius complete all as specified and as directed. |
| 97 | M&L TMT reinforcement bars 10mm dia and over cut to length, bent to shape as required including cranking, bending, spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and as directed. |
| 98 | M&L TMT reinforcement bars 6 to 8 mm, cut to length, bent to shape as required including cranking, bending, spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete. |
| 99 | M&L for reinforced cement concrete (nominal mix) in type B1 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed |
| 100 | Use&waste formwork to sides and soffits of floor or roof beams, girders, lintels, cantilevers, shelves including supports, overhangs etc and also splays between floor and beam etc for fair finished surface |
| 101 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light,fan, socket or power) including fixtures and fittings such as switches,ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking into credit and making good disturbed surfaces of walls, floors, etc all as specified and directed. |
| 102 | Dismantling/taking down of unserviceableold existing service /submain wire of any size all as specified and directed |
| 103 | Dismantling/taking down of unserviceabledistribution boards with MCBs all as specified and directed. |
| 104 | Taking down/dismantling of storage type hot water Geyser of 50/35/25 litre capacity from different locations by disconnecting inlet/outlet connections anddeposited to E/M office store yard all as specified & directed |
| 105 | Taking down carefully serviceable/unserviceable exhaust fans of any size from its position, and deposited to E/M office store yard all as specified anddirected. |
| 106 | Taking down and refixing of LED tube light fitting bright18/20 Watt, slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connectorall as specified and directed. |
| 107 | Taking down and refixing of2 x 2 LED 36 Watt, slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 108 | Taking down carefully 1.5/2 TR ACs any typeof any size from its position with all precaution and refixing on its original position in fully serviceable condition by gas charging & petty repairing properly up to fully satisfaction of Engr in Charge all as specified anddirected. |
| 109 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FRLS H cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium grade, machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI markedwith 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost ofcutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed |
| 110 | All as per ser item No 09.00 here-in-before but for one switch socket combination5/6 amp on independent board complete all as specified and directed. |
| 111 | All as per ser item No 09.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed. |
| 112 | All as per ser item No 09.00 here-in-before but for one switch socket combination 6 pin 5/15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed. |
| 113 | All as per ser item No 09.00 here-in-before but for one switch socket combination 6 pin 5/15 Amps on independent board with wire of size 4.0 Sqmm and 4.0 Sqmm as earth wire.complete all as specified and directed. |
| 114 | S & Fmodular switch, one way, 6 Amp, one module, 240 volts complete all as specified and directed. |
| 115 | S&F modular socket, outlet 2-in-1, 5pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 116 | S & Fmodular switch, one way, 16 Amp, one module, 240 volts complete all as specified and directed. |
| 117 | Supply and fixing modular socket, outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, complete all as specified and directed. |
| 118 | S&Finreplacement modular, ceiling rose 3 terminals poly carbonate isolated all as specified & directed. |
| 119 | S & Finreplacement modular lamp holder insulated PVC/Polycarbonate body with back plate for conduit /batten fittings complete all as specified and directed. |
| 120 | Supply & fixing inreplacementLED tube light complete fitting 20 watt 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose comlete all as specified and directed. |
| 121 | Supply & fixingcurved 6 watt, LED warm white adjustable multiple angle mirror Light including inbuilt LED driver new generation, energy saving, environmental friendly, long life aesthetically designedfor diffused lighting with high power LED as light source complete all as specified and directed by Engineer in charge |
| 122 | S & FinreplacementLEDlamp 10 Watt, B22 CDL complete all as specified and directed by Engineer in Charge |
| 123 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completeall as specified and directed by Engineer in charge . |
| 124 | Supply and fixing LED luminaire, warm white, 600 mm x 600 mm, 36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completeall as specified and directed by Engineer in charge . |
| 125 | Supply & fixingLED decorative wall light, gold finish fixture with white glass diffuser suitable for 9 W LED bulb E27 base complete all as specified and directed by Engineer in charge |
| 126 | Supply and fixof LED slim square/circular panel light fitting forceiling light 12watt, colour warm white including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. |
| 127 | Supply & fixing recess mounting spot LED light round downlighter designed with excellent thermally managed luminaire12 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lampsuitable for roof ceiling including connecting up with driver three core flexible coppder conductor cases of suitable size complete all as specified and directed by Engineer in charge |
| 128 | Supply and fixinginreplacement factory made epoxy powder coated Distribution Board TPN, 4 ways ( VTPN MCCB DB ) and space forMCCB as incomer, with metal door ( IP-43 ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.NOTE:- MCCB shall be measured and paid seperatly. |
| 129 | S&Finreplacement MCCB, 160 Amp, 3 Pole, breaking capacity 36 KA withcomplete electricalconnections by appropriate size of copper lugs, complete all as specified and directed. |
| 130 | S & F inreplacement sheet metal enclosure double door type,surface mounted concealed inwall12 ways, 240 Volts, ISI marked 200 amps bus bardust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. |
| 131 | S&F in repair sheet metal enclosure for MCB, DB, TPN, 415 Volts, 200 amps rated busbar, 4 way, double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP-54 including wooden rectangle board of first class hardwood of suitable size for mounting of DB box complete all as specified and as directed. NOTE:- MCB shall be measured and paid seperatly. |
| 132 | S&F inreplacement MCB, SP suitable for 240 volts, AC supply 6to 32 Amps ,with over load and short circuit protection and rupturing capacity not less than 10KAcomplete all as specified and directed by Engineer - in -Charge. |
| 133 | S & Finreplacement MCB SPNsuitable for 240 volts, AC supply40 to 63 Amps,with over load and short circuit protection and rupturing capacity not less than 10KAcomplete all as specified and directed. |
| 134 | S&F in repair MCB, TPN suitable for 240 volts, \"B\" curve,AC supply63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, complete all as specified and directed. |
| 135 | S&F in repair MCB, TP suitable for 240 volts, \"B\" curve, AC supply63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, complete all as specified and directed. |
| 136 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 20 mm external diameter and PVC insulated stranded copper conductor of 6.0 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 137 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Four single core PVC insulated FRLS cable 1100 V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. of 20 mm external diameter and PVC insulated stranded copper conductor of 6.0 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Four runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 138 | S&F inreplacement building security light fitting complete with 36 watt, LED type pressure die-cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (lightgrade) 1.5 metre long and MS clamp and nut bolts washersand connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed |
| 139 | M&Lin replacement of earthing complete with galvanised steel earth plate electrode size 600X600X6mm thickburried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire4mm diaby means of bolts, nuts, check nuts & washers ofgalvanised iron and connected to test point all asshown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm gradedcrushed stone aggregatereinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GIprotection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 140 | Supply and fixinreplacement sheet metal enclosures with socket plug top and MCB\"s with two pin and earth plug and socket complete with one Single pole MCB 240 V grade, 25/20 Ampcomplete all as specified and directed . |
| 141 | Supply and fixmodular combo, AC box (incl socket , plug top and 25 Amp MCB\"s) 240 V, 50 Hz an ISI-marked, impact-resistant body and Built with high-impact polycarbonate materials that offer high softening temperatures, ensuring long-lasting performance complete all as specified and directed . |
| 142 | Supply and fix in replacement exhaust fan, PVC body AC single Phase, 230V, 50 Hz,1200 RPM copper winding of size 250 mm sweep withlouvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. |
| 143 | Supplying, installing, testing & commissioning, in replacement vertical type storage water heater (geyser), 50 litres capacity, standing loss less than 0.562 Kwh per day for 45⁰C difference of temperature as per IS 2082 (five-star rated as per BEE), reheating time less than 60 minutes, mixing factor less than 20%, shock proof high density PUF insulation body material, glass lined inner tank material having warranty 7 years on tank material, 4 years on heating element and 2 years on other spares parts comprising following fittings (a) glass coated incoloy element (b) capillary type thermostat (c) thermal cutout (d) multifunction valve (e) earth leakage circuit breaker (f) magnesium anode rod cathodic protection (g) flexible cable of suitable length with 3-pin plug of 16A capacity (h) drain plug (j) fusible plug fitted on the crown of water heater with operating temperature between 100⁰C to 110⁰C including fixing by grouting and fastener complete all as specified and as directedNote :-(i) Taking down old/unserviceable geyser & deposit to MES Store yard deemed to be included in quoted rate. |
| 144 | Supply and fix wall mounted fan of metal body with plastic blades, 400 mm sweep, 1350 rpm, 55 watts, 240 V, 50 Hz, air deliver 65 m³ per minute, three Nos of speed controlling complete all as specified and all as directed. |
| 145 | Deduct Schedule of credit (calculation will be done off line) Rs. 17411.00 |
