|
| 1 | Demolition of Concrete (un reinforced)in ground floor and pavings n exc 15 cm all as specified and directed |
| 2 | M&L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) avg.40 mm thick in levelling course for laying floor finish complete. |
| 3 | Dismantling floor, health or wall tilling and kota stones including cement mortar bedding (bur not backing), removing rubbish off the premises complete all as specified and directed. |
| 4 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc.0.11 sqm but not exc 0.18 Sqm,, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including 15 mm thick screed bed or bedding layer of cement mortar 1:6for laying floor finishes complete all as specified and directed. |
| 5 | M & L for glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with and including rendering 10 mm thick in cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces for backing coat of tiles complete all as specified and directed. |
| 6 | M&L for light shade glazed Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe surface of tile with and including 15 mm thick screed bed or bedding layer of cement mortar 1:6for laying floor finishes complete all as specified and directed. |
| 7 | M&L for light shade Ceramic tiles 7 to 8 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe surface of tile with and including 10 mm thick rendering in cement mortar 1:4complete all as specified and directed. |
| 8 | M&L for 20 mm thick granite stone slab (table rubbed and polished) as on shelves/Wash Hand Basin plateform/pillars over screed bed 20 mm thick in cm (1:4) set jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete. |
| 9 | M &L for 20 to 25 mm thick machine cut, hand dressed kota stones in floors / tread of stair over and including screed bed 20mm thick in cm (1:4) set jointed in neat cement slurry mixed with pigments to match the shade of slab including rubbing and mirror polishing etc complete. |
| 10 | M &L for 20 to 25 mm thick machine cut, hand dressed kota stones in riser of steps, skirting, dado and window cills laid over cement screed and jointed with grey cement slurry mixed with pigments to match the shade of slab including rubbing and mirror polishing etc including 10 mm thick rendering in cement mortar 1:4complete all as specified and directed.complete. |
| 11 | Taking down Chowkatts or framesn exc 1.5 sq m each with shutters (without taking off shutters form the frames) complete all as specified and directed |
| 12 | Taking down Chowkatts or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)complete all as specified and directed |
| 13 | S & F solid PVC door frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet , mitre cut at two corners and joined with two Nos of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm MS square tube of 19 gauge, EPDM rubber gasket and weather seal to be provided through out the frame. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame using PVC fasteners. Aluminum of four Nos of screws to be provided for each vertical member and miniumum of two nos of screws for each horizontal member complete as per Manufacturer’s specification and drawing and as directed. |
| 14 | S&F Factory made solid panel PVC door shutter 30mm thick (style consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned on Page 149 of SSR-2020 Part-II, complete. |
| 15 | S&F 35mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides. |
| 16 | S&F 35 mm thick 2nd class HW, glazed and skeleton shutters, open rebated & prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass,gauze etc complete all as specified and directed. |
| 17 | S&F stainless steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned teaks galvanised wire staples fixed to steel window/door etc all as specified |
| 18 | S&F 100 mm size stainless steel butt hinges fixed complete all as specified and directed. |
| 19 | S&F stainless steel handles each 125 mm long complete. |
| 20 | S&F stainless steel barrel tower bolt 125 mm size complete. |
| 21 | S&F stainless steel handle 150 mm long complete. |
| 22 | S&F stainless steel tower bolts, with bolt and fixed, 200 mm size complete. |
| 23 | S&F 250 mm size stainless steel, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections fixed complete all as specified and directed. |
| 24 | S&F Floor door stopper of stainless steel body and tongue, anodised, with hard drawn steel spring, 150 mm long fixed in floor complete. |
| 25 | M&L preparation of new wooden surfaces of any description, over 10 cm in width or girth, applying two coats synthetic enamel paint over and including a coat of pink primer complete. |
| 26 | S & F of aluminium anodised powder coated of approved colour, sliding type three track (02 glazed shutters and 01 gauzed shutter) window with sliding shutter and frame, with 5 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed: -(i) Frame section of size 45 X 75 X 1.40 mm for top and sides rails and 45 X 75 X 1.40 mm for bottom rail. (ii) Top, bottom and side rails of shutter of section size 27 X 65 X 1.4 mm.(iii) Glass 5.00 mm thick one side reflective glass and other side visible fixed with rubber gasket and appropriate size aluminium clips and necessary handles, tower bolt etc. as directed. (iv) Stainless steel wire cloth (v) Filling of gap between wall and aluminium frame with silicon putty to make it proper water tight.(vi) Locking arrangement and providing Namda rope to make the frames air tight.Note : Refer HQ CE Gandhinagar TD drg No CEAG/AR/TD/06R dt 17 Nov 2022 sheet No 1/7 to 7/7. |
| 27 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, fixed/openable (Top hung/side hung) including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS-733 and IS-1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junction i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, CP brass/stainless screws all complete as per architectural drawings and the direction of Engineer-in-Charge.Note : Refer HQ CE Gandhinagar TD drg No CEAG/AR/TD/05R dt 17 Nov 2022 sheet No 1/9 to 9/9”. |
| 28 | S&F anodised aluminium grill (anodized transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass /stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size of fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete as per sample kept in AGE (I) (AF) Jaipur. |
| 29 | S&F 5mm thick ordinary quality sheetglass glazing with u-pin and oil puttyexc 0.5 sqm each pane in square/ rectangle shape andsize cutting and fixingetc all as specified. |
| 30 | S&F 18 mm thick HDHMR board exterior grade including 1 mm thick acrylic high gloss factory laminated (both side) sheet over HDHMR one side and other side balancing white, antifungal, moisture resistant and anti-borer as per IS-14587 for frame and shutter for kitchen cabinet/wardrobe etc complete all as specified and directed. |
| 31 | Supply and fixing 2nd class hard woodin scantling clean sawn, timber framed fixed in any position as framed work with nails and including dismantaling all as specifed |
| 32 | S&F 2nd class hard wood Plain fillets exc 6 not exc 13 sq. cm but bull nosed, splayed,chamfered or rounded on one edge or face. |
| 33 | S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed. |
| 34 | S&F Stainless steel Hasp & staple safety type including bolt to hinge plate and fixed with with screws 75 mm in size. |
| 35 | S&F 100mm long, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished |
| 36 | S & F in repairs vitreous china wash basin white, flat back type, size 550 X 400 mm excluding taps, chain and plug but including waste pipe, brackets, cutting for and pinning in as required complete all as specified and directed. |
| 37 | S&F in repair mixer Pillar taps 15mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 38 | S & F Tubular towel rail, brass chromium plated, 20 mm dia, D type, 60 cm long between flange complete all as specified and directed. |
| 39 | S & F 32mm waste coupling of stainless steel (half or full threaded) for wash hand basin all complete ad as directed |
| 40 | S & F in repairs 600x450x5mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all complete ad as directed |
| 41 | S&F 15mm CP stop valves, cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair |
| 42 | S & F in repair vitreous china wash down water closet pan (Pedestal pattern) white EWC floor mounted type with PVC seat cover including fixing bolts and making connection to flushing cistern, including 100mm dia trap etc. complete all as specified and directed. |
| 43 | S & F in repair Vitreous China squatting pan, of ‘Orissa pattern ‘ white of size 580 X 440 mm, with integral foot rests and \"P\" or \"S\" trap including provision of lime concretebedding minimum 150 mm thick (1 lime, 2 sand or surkhi and 5 aggregate) complete all as specified. |
| 44 | S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 45 | M&L low level flushing cistern 10 Ltr capacity with twin flush system white complete with inlet ballvalve float , syphon assembly, handle including brackets etc. complete. |
| 46 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long stainless steel flexible tube and ABS wall hooks including making connections and fixed in position complete in all respect as s specified and directed. |
| 47 | S/F in repairs 15 mm two-way bore bib taps chromium plated cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 48 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store in 15mm bore. |
| 49 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store in 20 mm bore. |
| 50 | S & F of 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed. |
| 51 | S & F of 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed. |
| 52 | S&F PVC connection pipe 15mm size with PTMT nuts of length 450mm etc all as specified. |
| 53 | S&F in repairs 15mmlong body bib taps fancy type cast copper alloyCP with crutch of butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 54 | S&F fancy type 15 mm wall mixer three in one for mixing hot and cold water screwed down for iron pipe complete all as specified and directed. |
| 55 | S & F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to 15mm dia steel pipe or unionall complete as directed |
| 56 | S & F in repairstainless steel Soap dish, approximate size 160x 160x90mm any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-Charge |
| 57 | S&F ingrating 100 mm dia stainless steel (Min Wt 25 gms) complete all as specified and as directed by Engr-in-Charge |
| 58 | M&L PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement |
| 59 | S&FCast iron floor trap 75 mm , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete. |
| 60 | S&F fixed Cast iron soil, waste and vent spunpipes 75mm , in any length with or without ears with cement joints, laid in trenches or in floors all as directed and specified. |
| 61 | S&F fixed Cast iron soil, waste and vent spunpipes 100mm , in any length with or without ears with cement joints, laid in trenches or in floors |
| 62 | S&Fin repaircast iron soil, waste and vent spun pipes 100 mm borein any length with or without ears with cement joints fixed to walls. |
| 63 | S&F in repaircast iron soil, waste and vent spun pipes 75 mm bore in any length with or without ears with cement joints fixed to walls. |
| 64 | S&Fin repairs spun cast iron 100mm bore bendsetc all as specified |
| 65 | S&Fin repairs spun cast iron 75mm bore bendsetc all as specified |
| 66 | S&F 75 mm Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches |
| 67 | S&F 100 mm Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches |
| 68 | S&F 75 mm Cast iron cowls |
| 69 | S&F 100 mm Cast iron cowls |
| 70 | S&Fstack clams made out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100mm diapipe etc all as specified and directed complete. |
| 71 | S&Fstack clams made out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 75mm diapipe etc all as specified and directed complete. |
| 72 | M&L for Dismantling water tanks Exc 500 & n exc 1000 ltrs capacity and removing from site complete all as specified and as directed. |
| 73 | S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks triple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position over and including 100mm thick PCC (1:2:4) using type B1, 20mm graded stone aggregate in tank platform all as specified in SSR Part I. |
| 74 | M&L Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms) |
| 75 | Demolition of existing roof treatment any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including membrane complete all as specified and directed. |
| 76 | M & L for plain cement concrete type B-1 1:2:4,mix (using 20mm graded stone agg) as in roof padding, coping, parapets, bed plates, kerb and the like rounded or chamfered on edges complete all as apecified and directed. |
| 77 | M & L for cutting out cracks to V-section in existing roof, chajjas, terracing or any similar position upto 40 mm deep, cleaning out the same with water jets to get rid of any loose material, wetting, grouting with cement and sand slurry 1:3 mixed with liquid water proofing compound complete all as specified and directed. |
| 78 | M&L for water proofing treatment to RCC roof slab all as specified below and as directed:-(a) Apply one coat of bituminous primer @ 0.25 Kg/Sqm.(b)Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area.(c)Laying APP polymer modified membrane 3mm thick and weighing not less than 3.00 Kg/Sqm with non-woven polyester reinforcement applied by torch application method.(d) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm |
| 79 | Supply only liquid water proofing compound. |
| 80 | M & L for preparation of surfaces of any discription and applying two coats of aluminium paint and all as specified and directed. |
| 81 | Taking down cement plastering on brick or stone walls, etc including raking out joints, hackingfor key, scrubbing down with water, etc complete all as specified and directed. |
| 82 | M&L 10 mm thick rendering in CM 1:6 as inner layer and 5 mm thick rendering in CM 1:4 mixed with WPC by weight of 3% weight of cement at other than fair faces of brick or stone masonry all as specified and directed by Engineer-in-charge. |
| 83 | M&L for rendering 15 mm thick in CM (1:6) on stone masonry surfaces complete all as specified and directed. |
| 84 | M&L 05 mm thick rendering in CM 1:3 on ceiling surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 85 | M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 86 | M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of average 2 mm thick wall care putty and one coat of primer complete all as specified and directed. |
| 87 | M&L for preparation of newly plastered surfaces of wall and applying 2 mm thick wall seal waterproof putty and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gms/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior emulsion paint of required shade with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete all as specified and directed. |
| 88 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed. |
| 89 | Demolition of brick work or stone / bouldermasonry includingall quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete. |
| 90 | M & L brickwork with subclass `B\" bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6). |
| 91 | Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in 1:4 cement mortarcomplete. |
| 92 | S&F in repair 25 mm diaStainless steel curtain rod with fixing brackets, stop, side pair of finials etc complete all as specified. |
| 93 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete. |
| 94 | S & Fframed work such as grills, gratings etc, with ends of bars shouldered and / or reveted, or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters walk ways, railings framwork of watertanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 95 | M&L for preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 96 | Providing & fixing false ceiling with fully perforated 12 mm thick micro tegular eged or 10 mm thic square edgd GRG false ceiling all heights with GRG (Glass fibre reinforced Gypsum) false ceilingtiles of size 595 x 595 of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.5 to 0.75 as per IS 8225 : 1987, Noncombustible (Fire resistant/retardant) as per BS-476 (Part4)-1970, fire resistant/retardant and light relectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main \"T\" runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per Sqm) i.e 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully thread hanger rod upto 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, galvanized iron parimeter wall angle of size 24 x 24 x 0.40 mm of length 3000 mm to fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawings and as per directions of Engineer-in-Charge. |
| 97 | M&L for 75 mm thick plain cement concrete type C-2, 1:3:6, using 40 mm graded stone aggregate as in plinth protection or similar work, concrete finish even and smooth with using extra cement complete all as specified and directed. |
| 98 | M&L for 75 mm thick plain cement concrete Type D2, 1:4:8 using 40 mm graded stone aggregate for sub base complete all as specified and directed. |
| 99 | M&L forchequered cement concrete tiles 30cmx30cmx25 mm thick, with colouredcement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed in CM 1:6 all as specified and directed. |
| 100 | M&L in RCC column/beam/Chajja/ facia/stair repair with applying 10 mm thick bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e.Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface including removal of loose / disintegrated old concrete / plaster and applying 15mm thick plaster with polymer modified mortar fortified with SBR (NitobondSBR 45 ) in proportion 1:3 by weight 5 litres Nitobond SBR 45 to added to 50 KG Cement with 13 litres water addition, finished surface to match with existingsurface of ceiling, beams, chajja and alike up to 10m from ground level complete& surface preparation etc complete all as specified and directed. |
| 101 | M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 part of Cementous powder applying at the rate of 1.40 Sqm/Kg mix per coat.Second coat should be applied after 4-6 hours of first coat, 5 days curing is to be carried out to the surface before providing plastering. |
| 102 | M&L for preparation of surface by scrapping any moisture or loose material and applying the water proofing smart care solution as per manufacturer specification and allow the water proofing solution to dry completely for 8 hours before application of further surface finishes complete all as specified and directed. |
| 103 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc, removing materials from siteand making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 104 | Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed. |
| 105 | Taking downMCB DB\"s complete with MCB\"s/Isolator etc removing materials from siteand making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 106 | M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including PVC Conduit complete with all PVCaccessories such as socket, elbow, junction box,etc./ fittings ISI marked and sunk type pressed steel terminal switch box 1.6mm thick with bakelite laminated sheet top cover 3mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for (Note : cutting & chasing of wall for inserting pipe/conduitis deemed to be included in quoted rate):-(a) One light point/bell point controlled by one, one way switch |
| 107 | (b) One ceiling fan/exhaust fan point controlled by one, one way switch through regulator. |
| 108 | (c) One three pin 5 Amp socket on same board with other switches. |
| 109 | (d)One 3 pin 5 Amp socket on independent board. |
| 110 | (e) One light point controlled by two Nos two switch. |
| 111 | All as per item No. 106 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmmstranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed. Note : cutting & chasing of wall for inserting pipe/conduitis deemed to be included in quoted rate. |
| 112 | S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copperconductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including PVC Conduit with accessories such as socket, elbow, junction box,etc. and fittings and one run of 6 sqmm single core multistrandedcopper conductor cable green colour as earth continuity conductor with suitable lugs made of copper connected to earth dolly complete all as specified and directed. Note : cutting & chasing of wall for inserting pipe/conduitis deemed to be included in quoted rate. |
| 113 | S&F switch piano flush type 5 amps, single pole one way 240 volts complete all as specified and directed. |
| 114 | S&F switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed. |
| 115 | S&F switch piano flush type 5 amps, single pole two way 240 volts complete all as specified and directed. |
| 116 | S&F bell push piano flush type 5 Amp complete all as specified and directed. |
| 117 | S&FSocket outlet 3 Pin 5/6 Ampflush type complete all as specified & directed. |
| 118 | S&Fsocket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete all, as specified & directed. |
| 119 | S&F ceiling fan regulator electronic flush , steped (four step)230 Volts AC all as specified and directed. |
| 120 | S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as specified. |
| 121 | S&F bell ding dong type AC 230 volt complete all as specified and directed. |
| 122 | Supply and fixing LED light fitting 20W, 220V,AC with driver,including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 123 | Supply and fixing LED light fitting 10W, 220V,AC with driver,including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 124 | S&F LED Bldg security light high pressure die cast aluminium housing, IP 66, 25Watt, PF>0.95, Operating Voltage 120-270V AC, 50HZ including hot diped galvanisedmounting bracket made to shape with and includinggalvanised clamps with bolts, nuts, washers and conductor to fitting with 3 core 1 sqmm PVC insulated copper cable from control box to fitting complete all as spd.complete all as spd and directed by Engineer-in-Charge. |
| 125 | Taking down existing ceiling fan, dismantling blades and refixing after cleaning incl conecting up with three core flexible cable from ceiling rose to fan complete all as specified and directed. |
| 126 | S&F SPN DB Box, 12 way 12 Module, Double door, IP 54, Suitable for flush mounting and surface mounting with 100A Copper bus bar and fully shrouded neutral bar with door earthing and cable entry cover complete all as spd by Engr in Charge. |
| 127 | S&F VTPN DB Box, 4 way 4Module, Double door, IP 54, Suitable for flush mounting and surface mounting with 160A Copper bus bar and fully shrouded neutral bar including MCCB TPN 63 AMps 25 KA with door earthing and cable entry cover complete all as spd by Engr in Charge. |
| 128 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP SP , in the MCB DB Complete with connection testing and commissioning |
| 129 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 20 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 130 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of SPN and current carrying capacity SPN 40 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 131 | Supply and fixing 240V 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning of SPN 63 Amps |
| 132 | Taking down of Geyser of any capacity, cleaning the tank and refixing on wall complete all as spd and directed |
| 133 | M&L for Submain wiring with 2x4.0 sq. mm, FRLSH PVC insulated unsheathed multistranded copper conductor 1100 volts grade cable drawn through and including PVC casing caping ISI marked accessories and one run of 4 sqm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cableas earth conductor all as specified and directed Note : All runs of cables and 1 run of conduit shall be measured and paid as one meter length of unit.Note : cutting & chasing of wall for inserting pipe/conduitis deemed to be included in quoted rate. |
| 134 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB, 20 Amp complete all as specified and directed. (For Geysers) |
| 135 | M&L earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2020 incl dismantling of old unseviceable existing earthing complete all as specified and directed. |
| 136 | Supply and fix in repair Gun-metal, globe, or gate valves, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 137 | M&L for LT under ground cable 16 Sqmm 4 Core, 1100 V grade XLPE insulated screenedPVC bedded , galvanized steel strip or wire armoured, electric power cable with stranded aluminium conductors laid in pipes, trenches/ducts fixed on pole etc complete all as specified and directed. |
| 138 | Excavation in trenches not exc 1.5 mtrs wide & not exc 1.5 mtrs in depth for taking out/laying of pipes/cables etc & getting out in Hard/Dense soilcomplete all as specified and directed . |
| 139 | Removing excavated materials not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtrs above the starting pointcomplete all as specified and directed . |
| 140 | Returning, filling in trenches, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. |
| 141 | Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 (Part 24) : 2017 for protection of underground cables of size.Outer/Inner dia of pipe 40/32 mmwith all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified(excavation and earth work shall be measured and paid separately). Rate for Inserting cable in pipe deemed to be included in quoted rate. |
| 142 | Taking down existing exhaust fan complete all as specified and directed. |
| 143 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as spd and directed |
