|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 4 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 5 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 6 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 7 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 8 | 300x16 mm |
| 9 | 250x16 mm |
| 10 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 11 | 300x10 mm |
| 12 | 250x10 mm |
| 13 | 200x10 mm |
| 14 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 15 | 125 mm |
| 16 | 100 mm |
| 17 | 12 mm cement plaster of mix : |
| 18 | 1:6 (1 cement: 6 fine sand) |
| 19 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 20 | 1:6 (1 cement: 6 fine sand) |
| 21 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 22 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 23 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 24 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 26 | Two or more coats on new work. |
| 27 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 28 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 29 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 30 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 32 | 20 mm nominal outer dia. Pipes. |
| 33 | 25 mm nominal outer dia .Pipes. |
| 34 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 35 | 45 cm length |
| 36 | 15 mm nominal bore |
| 37 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 38 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 39 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 40 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 41 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 42 | Inside size 90x80 cm and 45 cm deep including pre-cast R.C.C. manhole cover and frame (light duty) 455x610 mm internal dimensions |
| 43 | With common burnt clay F.P.S. (non modular) bricks of class designation 3.5 |
| 44 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 45 | With common burnt clay F.P.S. (non modular) bricks of class designation 3.5 |
| 46 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 47 | 30 mm thick |
| 48 | Replacingexisting damaged sanitary pipes by providing UPVC SWR soil waste and vent pipes by cutting, removing, replacingwith working pressure 4kgf/sq.cm conforming to IS : 13592 Type B of Ultrafit/Self fit including jointing with \"T\" shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant. (i)Single socketed pipe(couplings, other accessories will be paid separately) |
| 49 | 110mm diameter |
| 50 | 75mm diameter |
| 51 | Replacing existing on wall face damaged unplasticised - PVC moulded fittings/ accessories with new fittings/accessories for unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type A including cutting, replacing, jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 52 | Tee with door |
| 53 | 110X110X110 |
| 54 | 75X75X75 |
| 55 | Plain bend of required degree |
| 56 | 110mm bend |
| 57 | 75mm bend |
| 58 | Door bend |
| 59 | 110mm |
| 60 | 75mm |
| 61 | Cleaning of terrace / canopy/ chajjas by removing leaves grass dust, rubbish and other deposited / accumulated materials etc. including removal of blockages/chockages of khurras/spouts of terrace/chajjas etc. and disposal of rubbish to the dumping ground out side periphery of the building. (plan area of the terrace/chajja/canopy will be measured for payment) |
| 62 | Terrace area connected to blocked khurras and spouts & like. |
| 63 | Chajjas area connected to blocked spouts & like |
| 64 | Removing glass panes from windows and replacing them with new glass panes with putty and nails wherever necessary : float glass panes of thickness 4mm |
| 65 | for windows in ground floor and /or for windows which can be accessed from inside of the room / balcony with ladder arrangement wherever necessary. |
| 66 | for windows in upper floors ( other than ground floor ) up to 8 floors with necessary Jhoola arrangement |
| 67 | Cleaning of existing sewer lines, manholes etc. Cost includes all labour for removing the silt, slush, waste etc. and rodding the sewer lines and manholes by mobile sewer rodding equipment/manually from manhole to manhole to clear the blockage, chokages etc. for proper functioning of sewer lines( The payment shall be made for removal of blockages in between manhole to manhole as one job with all above operations.) |
| 68 | Providing. Laying and jointing FoamcorePVC drainagepipes, including necessaryfittings etc. , jointing with solvent and testing for water leakages etc. all complete as per the directions of Engineer-In-Charge solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant . (i)Single socketed pipe(couplings, other accessories will be paid separately) |
| 69 | 100 mm dia |
| 70 | Repairs to the existing Aluminium/ PVC/ Wooden doors/windows by removing and refixing the same after attending necessary repairs etc. with necessary screws, nails ,hinges etc. including welding etc. wherever required complete to make it working condition (Each door/window irrespective of size will be measured for payment. cost of Hinges, handles and other accessories if any will be paid separately). |
