Name of work : Civil Works Maintenance of Motia Khan Flats (HS-2010).SH: Annual maintenance and operation of water supply pump sets, D.G. sets, fire pump sets, firefighting equipments, common lighting, fire alarm system, PA system,at 320 Multistoreyed SFS flats at Motia Khan in Block No.3 & 4.
Sl. No.
Item Description
1
Operation of clear water pump sets, D.G. set, fire pump sets, along with fire fighting equipments, fire alarm system, PAsystem & common lighting i/c minor maintenance etc. as per inventory and terms and conditions attached.
2
Servicing, preventive maintenance and testing, of 100 BHP diesel engine pump set including supply and replacement of engine oil, filter, coolant, hose pipe kit i/c cleaning / calibration of injectors etc. complete as required.
3
Servicing, preventive maintenance testing of following capacity D.G. set along with panel, self, alternator and solenoid valve and cleaning / calibration of injectors including supply and replacement of engine oil, oil filter, fuel filter, air filter, water softener and rocker cover, gasket etc. complete as required.
4
140 KVA
5
Supply and replacement of fully charged lead acid battery of following capacity including replacement with old and connection, testing,earthingetc.completeas required along with buyback of old batteries.
6
180 Ah battery
7
150 Ah battery
8
Supply & replacement of (from deputed labour), Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirementwith driver efficiency >85%, Operating voltage AC140 270 Volt,frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20,CRI>80, Flicker free (flicker should be below 5 %), life time (LED,Driver& electrical circuitry), ofminimum 50000BurningHourswith70%ofinitial Lumenmaintained tilllife ends, CCT3000°K/ 4000°K / 5700°K/6500°K 46 DELHI SCHEDULE OF RATE (E&M) 2025(AsperANSIBin),SDCM(Standard Deviation Colour Matching) <3,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BISstandard.Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. completeinallrespecti/c externalconnectionswith1.5 sq.mmFRLS/HFFR,PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy≥120 <135lm/Watt output . LM79 & LM80 Test report andalltestingrequiredforLED fixtures as per BISshall be submitted.Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermalmanagement:heatsinkofaluminiumhousing such that LED junction temperature shall not rise above 90°C). along with buyback of old fittings.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
