|
| 1 | Fixed High Pressure Main & Standby, Master & Slave Cylinder Operation principle using directional valve (2+2) x 45 Kg. CO2 Cylinder Bank with Initial & Extended Discharge Tubular Frame Assembly Fully Integrated & TestedINITIAL DISCHARGE |
| 2 | CO2 Cylinder Master Assembly consist of CCOE approved 68ltr w/c cylinder filled with 45kg CO2 gas with valve operated by 24VDC solenoid and manual lever. |
| 3 | CO2 Cylinder Slave Assembly consist of CCOE approved 68ltr w/c cylinder filled with 45kg CO2 gas with valve operated by pneumatic actuator |
| 4 | Online Monitor Analogue Type with Normal Indication - Analog LED type |
| 5 | N2 Pilot Cylinder Assembly |
| 6 | High Pressure Actuation Hose - 1000mm |
| 7 | 25NB CO2 Directional valve with Joing Manifold |
| 8 | Joining Manifold for 4 Nos. of Directional Valve |
| 9 | Tubular Frame Assembly with Weighing Device Mounting Rail (Suitable for (2+2) Nos.of 45Kg. Capacity CO2 Cylinders) |
| 10 | Non-Return Valve suitable for CO2 Master Cylinder |
| 11 | Non-Return Valve suitable for CO2 Slave Cylinder |
| 12 | High Pressure Discharge Hose - 400mm |
| 13 | High Pressure Discharge Hose - 350mm |
| 14 | High Pressure Actuation Hose - 550mm |
| 15 | High Pressure Actuation Hose - 300mm |
| 16 | Manifold Safety Valve |
| 17 | Bleeder valve |
| 18 | Pressure Switch |
| 19 | Fixed High Pressure Main & Standby, Master & Slave Cylinder Operation principle using directional valve (3+3) x 45 Kg. CO2 Cylinder Bank with Initial & Extended Discharge Tubular Frame Assembly Fully Integrated & Tested EXTENDED DISCHARGE |
| 20 | CO2 Cylinder Master Assembly consist of CCOE approved 68ltr w/c cylinder filled with 45kg CO2 gas with valve operated by 24VDC solenoid and manual lever. |
| 21 | CO2 Cylinder Slave Assembly consist of CCOE approved 68ltr w/c cylinder filled with 45kg CO2 gas with valve operated by pneumatic actuator |
| 22 | Online Monitor Analogue Type with Normal Indication - Analog LED type |
| 23 | Joining Manifold for Directional Valve |
| 24 | Tubular Frame Assembly with Weighing Device Mounting Rail (Suitable for (3+3) Nos.of 45Kg. Capacity CO2 Cylinders |
| 25 | Non-Return Valve suitable for CO2 Master Cylinder |
| 26 | Non-Return Valve suitable for CO2 Slave Cylinder |
| 27 | High Pressure Discharge Hose - 400mm |
| 28 | High Pressure Discharge Hose - 350mm |
| 29 | High Pressure Actuation Hose - 550mm |
| 30 | High Pressure Actuation Hose - 300mm |
| 31 | Manifold Safety Valve |
| 32 | Bleeder valve |
| 33 | Pressure Switch |
| 34 | CO2 Nozzle with Corn horn with Adaptor |
| 35 | Safety Sign Board - Vacate Immediately. |
| 36 | Safety Sign Board - Do Not Enter |
| 37 | 25 NB Manual Lockout Valve with Supervisory Limit Switch |
| 38 | Sealed Probe type horizontal heat detector with junction box - 90 Deg.C Temperature Setting |
| 39 | Conventional Heat detector with base and junction box |
| 40 | Manual Gas Discharge Station with inbuilt addressable module suitable for Semi outdoor application |
| 41 | Inhibit Switch / Abort Switch with inbuilt addressable module suitable for Semi outdoor Application |
| 42 | Electronic dual tone hooter with flashing lamp for Indoor Application |
| 43 | Barrel door limit switch |
| 44 | Main and standby selector switch unit |
| 45 | Conventional Microprocessor Based 8 Zone Type Fire Alarm cum Gas Discharge Panel with 4 Gas Discharge Modules with inbuilt Charger & with Battery and Auxillary Power Supply. |
| 46 | M.S Junction Box with terminals |
| 47 | FRLS Armoured Copper Conductor 1.1 KV Grade Cables |
| 48 | 2C x 1.5sq.mm |
| 49 | 4C x 1.5sq.mm |
| 50 | Carbon Steel Seamless Sch80 Pipe as per ASTM A 106 Gr B |
| 51 | 25 NB |
| 52 | Forged Fittings |
| 53 | STRUCTURAL STEEL For Hydro. Generator #1, 2, 3 & 4 |
| 54 | ISA (40x40x5) |
| 55 | M.S. Insert Plate (6mm Thk.) (150 Sq.mm) |
| 56 | Anchor Fastner (M10x100mm Long) |
| 57 | G.I U-Bolt with washer & Nuts (25NB) 8 mm Thick Rod. |
| 58 | M.S Mounting Plate for Probe Detector |
| 59 | FLANGES |
| 60 | FLANGE - 25 NB DRILLING AS PER ANSI B16.5 CL-300 |
| 61 | ACCESSORIES FOR CABLING |
| 62 | Cable Tie 100 mm |
| 63 | Cable Tie 200 mm |
| 64 | Cable Saddle 12 mm |
| 65 | Lugs U Type 1.5 Sq.mm |
| 66 | Double Compression Glands 19 mm |
| 67 | PVC Wall Plug (PVC Gitti) 35x8 mm |
| 68 | Screw 35x8 mm |
| 69 | Gypsum Screw (1-inch) |
| 70 | Erection, Testing and Commissioning Charges |
| 71 | Packing Charges |
| 72 | Transportation Chrges |
