|
| 1 | M&L cleaning of sludge from septic tanks soakage well/pits, manholes etc of any capacity and depth by taking out the sludge (solid material), removing the waste materials from outside MOD land and burying in pits including spreading well in pits after burying of sludge and covering the pit with 25cm thick layer of local earth available and cover the pit to make it hygienically fit, complete all as specified and as directed.(Excavation for pit shall be included in this item. |
| 2 | M&L cleaning of blocked, SGSW/ CI/PVC drain pipe sewage line any type & dia in horizontal or vertical position by rodding from man hole to man hole ends to septic tanks/soakage wells, well flushing after taking out existing man hole covers, taking out sludge and other materials blocked the drain pipes excavation of pits carriage and leveling of spoil pits after burying of sludge and removal of surplus soil to a distance not exceesing 50 mtr, complete all as specified and as directed. |
| 3 | Notes :-(a) NOC from Municipality : The successful tenderer shall be required to submit a valid No Objection Certificate (NOC) from the relevant Municipality office prior to the formal acceptance of their tender. Failure to provide the NOC within the stipulated timeframe may result in the rejection of the tender.(b)Sewage Waste Disposal :All sewage waste generated during the execution of work shall be deposited in the municipal land designated for this purpose by the Municipal Department.(c) Certificate of Disposal : While submitting each Running Account Receipt (RAR) for payment, the tenderer shall also submit a certificate from the Municipal Department confirming the proper disposal of sewagewaste in the designated municipal land for the corresponding period.(d) Recovery for Non-Compliance: In the event of failure to submit the required certificate of proper sewage waste disposal along with the RA receipt, a recovery charge of Rs 5000/- (Rupees Five thousand only) per trip will be deducted from the due payments. |
| 4 | M&L for cleaning blockage of gully trap of any size and depth, WC, urinal etc. By dewaterring and getting out of foreign materials scum etc, and removing outside defence land including CI/SGSW/pipe of any dia from gully trapp, WC Urinal any floor to manhole of building, complete all as specified and as directed. |
| 5 | Demolition and breaking up drain pipe 75/100 mm dia (AC,saltglazed, PVC or RCC pipes ) set in CM or any description incl Excn of Earthwork , RFR, removal and making good, complete all as specified and as directed. |
| 6 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipes after these are laid tested for 150 mm bore of pipes, complete all as specified and as directed. |
| 7 | M&L for 150 mm internal diaSail-glazed stoneware drain pipes laid in trenches and jointed as specified, complete all as specified and as directed. |
| 8 | M&L for 150 mm bore of pipe Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed. |
| 9 | Excavation in trenches for sewage line in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, complete all as specified and as directed. |
| 10 | Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm, complete all as specified and as directed. |
| 11 | Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.5 M above the starting point, complete all as specified and as directed. |
| 12 | Demolition of cement concrete reinforcement cut as required to facilitate demolition) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 13 | M & L precastRCC manholes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and as directed. |
| 14 | Mild steel TMT bars 8 mm dia, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 15 | M&L in repair for 10 User LLDPE septic tank (conventional) designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc, complete all as specified and as directed. |
| 16 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed. |
| 17 | S&Fpre-painted galvalume aluminium zinc coataing GI based profilesteel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw incl dismantling, complete all as specified and as directed. |
| 18 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling, complete all as specified and as directed. |
| 19 | S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed. |
| 20 | Applying two coats of synthetic enamel painting to new steel surfaces based exc. 10 cm width/girth over one coat of Red oxide primer including preparation of surfaces including filling with filler where reqd, complete all as specified and as directed. |
| 21 | Demoliton of cement concrete (un-reiforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 22 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of f the permishes, complete all as specified and as directed. |
| 23 | M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick colour and design (as approved) in vertical surfaceand jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 10mm thick cement plaster using CM (1:6), complete all as specified and as directed. |
| 24 | M&L 75 mm thick Cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base of flooring/hard standing, complete all as specified and as directed. |
| 25 | M & L for vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 26 | M & L for non skid coloured ceramic tile 7 to 8mm thick(Square/rectangular/in joint less) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 27 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20 mm CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. |
| 28 | M&L with grey cement and pigment Cement concrete chequred tiles 30 cm x 30cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors,and cut and polisedover 20 mm thick screed bed in cm (1:6), complete all as specified and as directed. |
| 29 | M&L for Machine pressed precast concrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M-35 Grade pointed with grey cement and pigment, complete all as specified and as directed. |
| 30 | M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) finished fair and even without using extra cement as in sub-floors, sub-bases, floors, pavings etc, complete all as specified and as directed. |
| 31 | M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 32 | Dismantling timber scantlings 40 sqcm and over in section in any position unframed work, complete all as specified and as directed. |
| 33 | S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position to replace old and decayed timber, complete all as specified and as directed. |
| 34 | S&F Softwood 2nd class Clean sawn with butt joints eaves boards 20 mm thick, complete all as specified and as directed. |
| 35 | M&L Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed. |
| 36 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framedbalusters; walkways; railings; framework of water tanksand similar workconforming to Fe.290.Gde-E-165 including dismantling of wrough iron of any descrption, complete all as specified and as directed. |
| 37 | S&F 1000 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed. |
| 38 | S&F in repair 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in positionon roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed. |
| 39 | S&F in repair25mm PPR Gate valve inserted as per requirement of site, complete all as specified and as directed. |
| 40 | S&F in repair20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms), complete all as specified and as directed. |
| 41 | Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed. |
| 42 | M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section, complete all as specified and as directed. |
| 43 | M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section, complete all as specified and as directed. |
| 44 | Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness inlcuding cover fillets, complete all as specified and as directed. |
| 45 | S&F6 mm thick insulation consisting of PVC Insulated Panels as in wall having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing.Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium), complete all as specified and as directed. |
| 46 | M&L 4 mm thick Plywood in ceiling, grade BWR,type BB, fixed with screws to timber frame work, complete all as specified and as directed. |
| 47 | S&F 6 mm thick insulation consisting of PVC Insulated Panels as in ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fittedas per specifications and drawing.Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)complete all as spd and as directed. |
| 48 | M & L 4 mm thick veneered decorative plywood ,grade 1 (with BWR resin)with decorative face veneers on one faces,in wallfixed with screws to timber frame work, complete all as specified and as directed. |
| 49 | S & F second classSoftwood 10 mm thickness planed both sides and edges tongued and grooved or rebated,and fixed with nails any situation, complete all as specified and as directed. |
| 50 | Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed. |
| 51 | M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section, complete all as specified and as directed. |
| 52 | Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar, complete all as specified and as directed. |
| 53 | M & L for brick work with sub class \"B\" bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified and as directed. |
| 54 | M & L For Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement, complete all as specified and as directed. |
| 55 | Preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer with alkali resistant priming paint, complete all as specified and as directed. |
| 56 | Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 57 | M & L For Rendering 10 mm thick plastering on brick work or concrete surface in CM (1:4) and rendering is to be finished even and smooth w/o using extra cement, complete all as specified and as directed. |
| 58 | M&L for preparation of undecorated/old surfaces of walls and applying two coat of white wash, complete all as specified and as directed. |
| 59 | M&L for preparation of new plastered surfaces and applying three coats of white wash, complete all as specified and as directed. |
| 60 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm, complete all as specified and as directed. |
| 61 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm, complete all as specified and as directed. |
| 62 | Taking down shutter of any description area exc. 1 sqm but n. exc. 2 sqm each, complete all as specified and as directed. |
| 63 | Taking down shutter of any description area n. exc. 1 sqm each, complete all as specified and as directed. |
| 64 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 65 | S&F Sheet glass thickness3.00 mm,ordinary quality and glazing with oil putty in square not exceed 0.5 sqm in each pane including, complete all as specified and as directed. |
| 66 | S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed. |
| 67 | S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b), complete all as specified and as directed. |
| 68 | Preparation oftwo coats of synthetic enamel paint over a coat of pink primer including preparation of surface on wooden sruface over 10 cm width or girth, complete all as specified and as directed. |
| 69 | S&F in repairs Door closer hydraulically regulated cost iron body designation No 1 universasl type suitable for door shuutters up to 700 mm in width and of weight not more than 35 kgs, complete all as specified and as directed. |
| 70 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed. |
| 71 | S&F Aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed complete all as spd and as directed. |
| 72 | S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 73 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed. |
| 74 | S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed. |
| 75 | S&F Aluminium handles 100 mm , cast type,anodised, complete all as specified and as directed. |
| 76 | S&F Aluminium handles 150 mm , cast type,anodised, complete all as specified and as directed. |
| 77 | S&F in repairfloor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed. |
| 78 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed. |
| 79 | S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed. |
| 80 | S &Fin repair curtain rod, mild steel, chromium platedfixing with stainless steelbrackets and funnels stops, rollers etc, complete all as specified and as directed. |
| 81 | S&F in repairRat tail (helical) door spring 300 mm long fix/welded with chowkat, complete all as specified and as directed. |
| 82 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard and 60 cm long, complete all as specified and as directed. |
| 83 | S&F in repair corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard, complete all as specified and as directed. |
| 84 | S&F in repair600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup, complete all as specified and as directed. |
| 85 | M&L two coat of synthetic enamel paint on steel surface over coat of a red oxide including preparation of Surfaces of any description, over 10 cm in width or girth,not otherwise described, complete all as specified and as directed. |
| 86 | M&L two coat of synthetic enamel paint on wooden surface over coat of a pink primer including preparation of Surfaces of any description, over 10 cm in width or girth,not otherwise described, complete all as specified and as directed. |
| 87 | S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings and connection pipe etc including pedestal, complete all as specified and as directed. |
| 88 | S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long, complete all as specified and as directed. |
| 89 | S&F vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cover incl provision of concrete/ white cementing and P or S trap in repairs, complete all as specified and as directed. |
| 90 | S&F PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed in repairs, complete all as specified and as directed. |
| 91 | S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and as directed. |
| 92 | S&F in repair Viterous China urinal, flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm bore PVC waste pipe fixed in repair incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and as directed. |
| 93 | S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 94 | S&Fin repairBrass CP centre hole basin mixer, complete all as specified and as directed. |
| 95 | S&F in repair for 15 mmbore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule in repair, complete all as specified and as directed. |
| 96 | S&F in repair stop valves fancy tupe chromium plated screwed down high presure , with crutch or butterfly handle, cscrewed both ends for iron pipe or for unions 15 mm bore, complete all as specified and as directed. |
| 97 | S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed. |
| 98 | S&F in repair PVC (SWR) junction single T equal or unequal 110 mm dia, complete all as specified and as directed. |
| 99 | S&F in repairPVC (SWR) bends 110 mm dia fixed, complete all as specified and as directed. |
| 100 | S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed. |
| 101 | S&F in PVC (SWR) junction single T equal or unequal 75 mm dia, complete all as specified and as directed. |
| 102 | S&F in repair PVC (SWR) bends 75 mm dia fixed, complete all as specified and as directed. |
| 103 | S&F in repairPVC connection pipe 15 mm size with PTMT nuts of length 600mmfixed to GI tubbing, complete all as specified and as directed. |
| 104 | Taking down and replacement with 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors, complete all as specified and as directed. |
| 105 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed. |
| 106 | S&F in repair Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated, complete all as specified and as directed. |
| 107 | S & F in repairBrass CP wall mixer15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed. |
| 108 | S&F in repair CP health faucet hand held triggered nozzle and delivers a spray of water with pipe, complete all as specified and as directed. |
| 109 | S&F in repairCP jet spray with flexible tube 1.5 mtr long, complete all as specified and as directed. |
| 110 | Note:- Schedule of credit Rs 99,039.00will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. |
