|
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-charge. |
| 2 | Material and labour for 40mm thick PCC (1:2:4), type B0 (Using 12.5mm graded stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 3 | Material and labour for virified ceramic tiles 10mm thick jointless (square /rectangular) polished, area of each tiles exc 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 4 | All as per item No.03 here-in-before but as in wall skirting over and including 10mm thick rendering of CM 1:4. |
| 5 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dresses stonework and precast concrete articles complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and as directed by Engr-in-charge.Note: WPC shall be measured and paid separately. |
| 8 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja, roof projection, shelve etc., and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 10 | Supply only liquid water proofing compound of approved quality complete all as specified and as directed by Engr-in-charge. |
| 11 | Material and labour for two coats of distemper oil emulsion on wall surfaces white or tinted through mechnical means over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment complete all as specified and as directed by Engr-in-charge. |
| 12 | Supply and fix for 10mm thick plaster of paris ceiling (gypsum anhydrous) to flat surface over second class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (fillets, metal frame work and G.I. wire mesh paid separately) including cost of two or more coats to give an even shade of plastic paint on ceiling with putty work complete with designer ceiling (with part ply, laminate and cove) complete all as specified and as directed by Engr-in-charge. |
| 13 | Supply and fix for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed by Engr-in-charge. |
| 14 | Supply and fix for hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed by Engr-in-charge. |
| 15 | Supply and fix for 12mm thick toughened glass with polished/ etching as per approved pattern without frame including cutting/ polishing edges in suitable size fixing for opening in vertical position or for partition etc., complete all as specified and as directed by Engr-in-charge.(i) Stainless steel D type handle - 02 Nos/ leaf.(ii) Stainless steel floors base plate /floor hinges, floor spring and lock - 01 No/ leaf.(iii) Cleats/ clamps, hinges etc., as required. |
| 16 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each and refix the same complete all as specified and as directed by Engr-in-charge. |
| 17 | Supply and fix for factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (two Nos glazed and one No wire mesh panels) upto 1.50m height made of (big series) frame 116x45mm and sash 46x62mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead /double glazing bead of appropriate dimension (area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc., profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc., after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and as directed by Engr-in-charge.Notes: (i) The quoted rate is inclusive of glass and wire mesh.(ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 18 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cms in soft/ loose soil complete all as specified and as directed by Engr-in-charge. |
| 19 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exc 10 sqm on plan and not exc1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed by Engr-in-charge. |
| 20 | Surface dressing not exc 30 cms deep and averaging 15 cms deep and getting out in soft/ loose soil complete all as specified and as directed by Engr-in-charge. |
| 21 | Removing excavated soils exc 250m but not exc 500m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge. |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cms thick with soils in soft /loose soil complete all as specified and as directed by Engr-in-charge. |
| 23 | Material and labour for PCC type D2 ,1:4:8 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete etc., complete all as specified and as directed by Engr-in-charge. |
| 24 | Material and labour for plain cement concrete (1:3:6), type C2 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed by Engr-in-charge. |
| 25 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-charge. |
| 26 | Material and labour for providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 (Using 20mm graded stone aggregate) and setting in cement mortar 1:6, in walls complete all as specified and as directed by Engr-in-charge. |
| 27 | Material and labour for hardcore of gauge not exc 63mm of broken stone, deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge. |
| 28 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by Engr-in-charge. |
| 29 | Material and labour for 100mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) for floor including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engr-in-charge. |
| 30 | Material and labour for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement and pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including a 20mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply and fix for mild steel tubular trussed, purlins, fencing posts, crane gantries rails and fastenings including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 including distance pieces, cleats, nuts and bolts any size and length etc., complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws /J hooks and bolts as required complete all as specified and as directed by Engr-in-charge. |
| 33 | Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide priming complete all as specified and as directed by Engr-in-charge. |
| 34 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 35 | Material and labour for preparing new plastered surfaces and applying three coats of white wash on surfaces on walls complete all as specified and as directed by Engr-in-charge. |
| 36 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 37 | Material and labour for 25mm thick PCC (1:2:4), type B0 (Using 12.5mm graded stone aggregate) as in flooring complete all as specified and as directed by Engr-in-charge. |
| 38 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 39 | Material and labour for coloured glazed ceramic design tiles 350x250x7mm/ 450x300x7mm thick, on vertical surfaces such as skirting, dados and risers to stepsetc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge. |
| 40 | Supply and fix for uPVC 20mm dia pipe pressure rating 10 Kgf/cm2 with all fittings and fixed to wall /laid in floor complete all as specified and as directed by Engr-in-charge. |
| 41 | Supply and fix in repairs premium quality 15mm bib tap with wall flange chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. FON-40081/OPP5037PM or Techno-commercially equivalent in Kohler/ Cera |
| 42 | Supply and fix in repairs soap dish complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. CAN-1137/AKP-35731P or Techno-commercially equivalent in Kohler/ Cera |
| 43 | Supply and fix in repairs toilet paper roll holder with flap complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. AKP-35753P or Techno-commercially equivalent in Kohler/ Cera |
| 44 | Supply and fix in repairs single lever basin mixture with popup waste system with 450mm long braided hoses complete all as specified and as directed by Engr-in-charge.Make: Jaquar-LYR-38051B/ORP-10011BPM or Techno-commercially equivalent in Kohler/ Cera |
| 45 | Supply and fix in repairs table top basin of size 170x835x455mm /565x425x140mm of white colour complete all as specified and as directed by Engr-in-charge.Make: Jaquar cat part No. KUS-WHT 35935/ JDS-WHT-0547 or Techno-commercially equivalent in Kohler/ Cera |
| 46 | Supply and fix in repairs 6 to 8mm thick bevelled edge mirror of selected quality glass of any size with decorative beadings, mounted on wall with CP brass screws and cup washers complete all as specified and as directed by Engr-in-charge. |
| 47 | Supply and fix in repairs 15mm bore hand shower (health faucet) with 8 mm dia, 1m long flexible tube and wall hook complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. ALD -573/ALD 577 or Techno-commercially equivalent in Kohler/ Cera |
| 48 | Supply and fix in repairs towel rail of 600mm long complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. AHS-1507 or Techno-commercially equivalent in Kohler/ Cera |
| 49 | Supply and fix in repairs glass shelf of 600mm long with CP bracket complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. CAN-1171N or Techno-commercially equivalent in Kohler/ Cera |
| 50 | Supply and fix for rimless single piece WC with UF slim seat cover, hinges fixing accessories and accessories set, cistern fitting, size 380x670x765mm with hydraulic sheet cover and connecting to \"S\" trap 300mm including taking down old complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. FSS-WHT-29853S300UFSM / OPS-WHT-0205 or Techno-commercially equivalent in Kohler/ Cera |
| 51 | Supply and fix in repairs CP connections 15mm dia and 450mm long with two Nos of brass checknuts and washers complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. ALD-805B or Techno-commercially equivalent in Kohler/ Cera |
| 52 | Supply and fix for stainless steel gratings size 125mm dia complete all as specified and as directed by Engr-in-charge. |
| 53 | Supply and fix for towel rack without lower hanger of 600mm long and 03 Nos hooks complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. AHS-1581 or Techno-commercially equivalent in Kohler/ Cera |
| 54 | Supply and fix for towel ring square with round flange complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. ACN-CHR-7721 or Techno-commercially equivalent in Kohler/ Cera |
| 55 | Supply and fix in repairs angle stop cock with wall flanges 15mm dia chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions complete all as specified and as directed by Engr-in-charge.Make: Jaguar cat part No. CON 059KN or Techno-commercially equivalent in Kohler/ Cera |
| 56 | Supply and fix in repairs fancy type CP 2 way bib cock with wall flanges fixed complete all as specified and as directed by Engr-in-charge. |
| 57 | Supply and fix in repairs 32mm dia., waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-charge. |
| 58 | Supply and fix for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed with floor including necessary fixing cleats/ clamps complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply and fix in repairs 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps complete all as specified and as directed by Engr-in-charge. |
| 60 | Supply and fix for vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed by Engr-in-charge. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 61 | Supply and fix in repairs PVC bends of 110mm dia complete all as specified and as directed by Engr-in-charge. |
| 62 | Supply and fix in repairs PVC bends of 75mm dia complete all as specified and as directed by Engr-in-charge. |
| 63 | Supply and fix for rotational moulded polyethylene water storage tanks of white colour triple layered (ISO certified) (cylindrical vertical with closed top) hoisted and fixed in position in Sch \"A\" of capacity 1000 litres, including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by Engr-in-charge. |
| 64 | Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor other side of waist slab with suitable arrangement complete all as specified and as directed by Engr-in-charge. |
| 65 | Material and labour for concealed point wiring with 1.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid concealed conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., round/ square PVC blocks at junction for batten holders, ceiling rose etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls or any type wall /ceilings /floors etc., anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6mm with earth dolly for mounting of modular switches/ sockets/ regulator etc., and 1.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly andcolour coding of cables such as Phase-Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall /floor etc., for the following complete all as specified and as directed by Engr-in-charge.Note: Cutting, chasing, drilling in any type of wall for fixing of concealed conduit and modular sunken boxes included in quoted rate. No extra payment will be made for this. |
| 66 | One light point controlled by one single pole 5 Amps switch. |
| 67 | One ceiling fan point controlled by one single pole 5 Amps switch. |
| 68 | One exhaust fan point controlled by one single pole 5 Amps switch. |
| 69 | One 5 pin socket point 5 Amps on independent board. |
| 70 | One 5 pin socket point 5 Amps on same board with other switches. |
| 71 | All as per item No.65 here-in-before but for power point wiring with 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board. |
| 72 | Supply and fix for modular switch, 1 module single pole one way 10 Amps complete all as specified and as directed by Engr-in-charge. |
| 73 | Supply and fix for modular socket, 2 module 6 Amps, 5 pin, 230 volts AC complete all as specified and as directed by Engr-in-charge. |
| 74 | Supply and fix for modular switch, 1 module single pole one way 16 Amps complete all as specified and as directed by Engr-in-charge. |
| 75 | Supply and fix for modular socket, 2 module 6/16 Amps, 6 pin, 230 volts AC complete all as specified and as directed by Engr-in-charge. |
| 76 | Supply and fix for modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200mm/ 1400mm complete all as specified and as directed by Engr-in-charge. |
| 77 | Supply and fix for PVC ceiling rose 65x50mm surface type with 3 terminals 230 volt complete all as specified and as directed by Engr-in-charge. |
| 78 | Supply and fix for modular white cover plate with frame, 3 module complete all as specified and as directed by Engr-in-charge. |
| 79 | Supply and fix for modular white cover plate with frame, 4 module complete all as specified and as directed by Engr-in-charge. |
| 80 | Supply and fix for modular white cover plate with frame, 6 module complete all as specified and as directed by Engr-in-charge. |
| 81 | Supply and fix for modular white cover plate with frame, 8 module complete all as specified and as directed by Engr-in-charge. |
| 82 | Supply and fix for modular metal flush box 3 module complete all as specified and as directed by Engr-in-charge. |
| 83 | Supply and fix for modular metal flush box 4 module complete all as specified and as directed by Engr-in-charge. |
| 84 | Supply and fix for modular metal flush box 6 module complete all as specified and as directed by Engr-in-charge. |
| 85 | Supply and fix for modular metal flush box 8 module complete all as specified and as directed by Engr-in-charge. |
| 86 | Supply and fix for LED light fitting, 4 feet 1x20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 1.5 sqmm from ceiling rose complete all as specified and as directed by Engr-in-charge. |
| 87 | Supply and fix for LED mirror light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 1.5 sqmm from ceiling rose complete all as specified and as directed by Engr-in-charge. |
| 88 | Supply and fix for LED light fitting of size 600x600mm, 36 watt, white /warm white as per site requirement 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of size 1.5 sqmm complete all as specified and as directed by Engr-in-charge. |
| 89 | Supply and fix for LED Cob suspended /pendant luminaire 20 watt with black powder coated aluminium housing and pressure diecast heat sink having high efficiency complete all as specified and as directed by Engr-in-charge.Make: Bajaj cat part No. BSDCSLB 20W or Techno-commercially equivalent in Havells /Philips /Wipro |
| 90 | Supply and fix for LED flood light fitting 100 watts, 240 Volt, single phase, AC, outdoor type, with pressure diecast housing, toughened glass with IP66 protection with 4 Kv inbuilt and 10 Kv external surge protection complete with driver, motherboard and LED, connecting and testing complete all as specified and as directed by Engr-in-charge.Make: Bajaj cat part No. PRAZE F 120L WH NB-A5 TG SD or Techno-commercially equivalent in Havells /Philips/ Wipro |
| 91 | Supply and fix for LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including brackets made out of 50mm dia light grade GI pipe 1.50m long bent to shape and size as per site requirement for fixing of street light fitting on poles/ walls including flat iron clamps-02 Nos of size 30x5mm made to shape including nuts, bolts and washerscomplete all as specified and as directed by Engr-in-charge. |
| 92 | Supply and fix in repairs sheet metal enclosure for DB\"s double door SPN, 4 ways when MCBs to be used single pole and neutral, with 300 Amps rated copper bus bar 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 93 | Supply and fix in repairs sheet metal enclosure for DB\"s double door SPN, 8 ways when MCBs to be used single pole and neutral, deep drawn with 300 Amps rated copper bus bar 230 Volt complete all as specified and as directed by Engr-in-charge. |
| 94 | Supply and fix for MCB SP, 6-32 Amps, 230V, C-series with breaking capacity of 10 KA complete all as specified and as directed by Engr-in-charge. |
| 95 | Supply and fix for MCB SPN, 40 Amps, 230 V, C-series with breaking capacity of 10 KA complete all as specified and as directed by Engr-in-charge. |
| 96 | Supply and fix for sheet metal enclosure for DB\"s double door VTPN 04 ways including 01 No, 4 poleMCCB 125 Amps, 25 KA to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V complete all as specified and as directed by Engr-in-charge. |
| 97 | Supply and fix for exhaust fan steel body AC single phase 230 V of size 380mm sweep, 900 RPM with blades, and frame and louvers including making holes in brick/ stone wall of suitable size dia for fixing of exhaust fan and making good to disturbed surfaces /wall with plaster and matching with the existing colour of wall/ floor etc., complete all as specified and as directed by Engr-in-charge. |
| 98 | Supply and fix for BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, AC single phase 230 V, 1200mm sweep Min air delivery 210 CFM with service value 6.00 BEE 5 star rated with brushless direct current motor (BLDC) and remote to control all the function of fan complete all as specified and as directed by Engr-in-charge. |
| 99 | Supply and fix for wall mounted fan AC single phase 230 Volt of size 400mm sweep in stone/ brick masonary or any type wall with four inch screws, gatti /PVC roul plugs all as per site requirement including making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall /floor complete all as specified and as directed by Engr-in-charge.Make: Havells Cat Part No. FHWSUSTWHT16 or Techno-commecially equivalent in Bajaj/ Crompton/ Almonard/ Alstom/ Khaitan/ Polar |
| 100 | Supply and fix for electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece and including drilling holes in any type of wall, fixing four nos anchor bolts of suitable size dia and five inch long, nuts and washer and connected to water pipe line including two nos hot and cold 600mm long connection pipe, and electric connection testing and making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall/ floor etc., complete all as specified and as directed by Engr-in-charge. |
| 101 | Material and labour for concealed sub main wiring with two single core 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., screws, gutti /rowl plugs PVC all as per site requirements including fixing inside stone walls/ brick masonary walls /ceilings /floors etc., with 2.5 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly and colour coding of cables such as Phase-Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall /floor etc., complete all as specified and as directed by Engr-in-charge.Notes: (i) Two run of single core 2.5 sqmm cable and one run 2.5 sqmm earth wire including PVC concealed conduit together will be measured as one unit.(ii) Cutting, chasing, drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this. |
| 102 | Material and labour for concealed sub main wiring with two single core 4 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., screws, gutti /rowl plugs PVC all as per site requirements including fixing inside stone walls/ brick masonary walls /ceilings /floors etc., with 4 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly and colour coding of cables such as Phase-Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall /floor etc., complete all as specified and as directed by Engr-in-charge.Notes: (i) Two run of single core 4 sqmm cable and one run 4 sqmm earth wire including PVC concealed conduit together will be measured as one unit.(ii) Cutting, chasing, drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this. |
| 103 | Material and labour for concealed sub main wiring with two single core 6 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25mm dia ISI marked with all accessories such as tee, bend, joint cover etc., screws, gutti /rowl plugs PVC all as per site requirements including fixing inside stone walls/ brick masonary walls /ceilings /floors etc., with 6 sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly and colour coding of cables such as Phase-Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/ wall with plaster and matching with the existing colour of wall /floor etc., complete all as specified and as directed by Engr-in-charge.Notes: (i) Two run of single core 6 sqmm cable and one run 6 sqmm earth wire including PVC concealed conduit together will be measured as one unit.(ii) Cutting, chasing, drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this. |
| 104 | Supply, installation, testing and commissioning triple earthing (3 Set earthing inter connected to 1 set) maintenance free earthing solutions comprising with the following complete all as specified and as directed by Engr-in-charge.(a) Supply and fix for after digging bore of size not less than 100mm dia and 3000mm deep the CPRI tested and UL certified maintenance free earthing system having a set of copper bonded Earth Rod of 3m length, 17.2mm dia made of high tensile low steel circular rods, molecularly bonded with 99.90% electrolytic grade copper on outer surface (minimum copper bonding thickness - 250 microns) with exothermally jointed copper bus bar of size 200x25x6mm for long lasting and connection. Earth copper bonded rod and exothermically jointed bus bar should be CPRI tested on 25KA fault current for complete interconnections of three earthing with 20x3mm copper strip upto 12m length - 3 Nos.(b) Earth copper bonded electrode should be tested by CPRI.(c) Current carrying capacity of earth copper bonded electrode is 25 KA/sec.(d) Supply and filling of carbon based, eco friendly earth enhancing compound of RHOS tested compound tested by NABL accredited Lab in compliance to IEC 62561-7 and having passed leaching, sulphur, corrosion resistivity test as per IEC 62561-7 an international standard for earth enhancement compound in compliance to IEC 62561-7 with a resistivity < 0.12 ohm-m, 30 kg - 3 Nos.(e) Earth enhancing compound shall be free from corrosion, it shall be carbon based material and shall be free from bentonite and other hazardous substances. The product does not dissolve, deteriorate or leach out of time. It shall be highly conductive and improves earth\"s absorbing power and humidity retention capability, it shall be eco-friendly and chemically inert to sub soil.(f) Supply and fix for plastic earth pit cover of size 247x338x210mm having load bearing capacity of 8 Ton and complying IEC 62561-5 - 3 Nos.Notes: (i) The unit rate includes 40mm dia GI pipe upto 7.5m for protection of earth lead.(ii) The unit rate includes copper main earthing lead /strip of size 20x3mm from copper bus bar of size 200x25x6mm to test point upto 7.5m.(iii) 3 set earthing will be measured separately one by one and in case measured value of earth resistance is recorded more than 1 ohms of any earthing than the earthing shall be re done by the contractor without any extra cost to the department.(iv) Distance of three earthing with each other will not be less than 3m |
| 105 | Supply and fix for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chasses or buried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing 4mm dia galvanised iron or steel wire complete all as specified and as directed by Engr-in-charge. |
| 106 | Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge. |
| 107 | Material and labour for sand cushioning to under ground cable with locally available dry sand for protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks /PCC cover, punning of sand using suitable T & P as per site requirementcomplete all as specified and as directed by Engr-in-charge.Note: Punned thickness of sand i.e 18 cm to be consider for measurement purpose. |
| 108 | Supply and laying unreinforced precast concrete cable cover class LV, type 1, flat, size 250x150x40mm complete all as specified and as directed by Engr-in-charge. |
| 109 | Supply and laying in trenches /laid in floor /duct /drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 16 sqmm 4 core and connecting up incoming /out going cables connection with suitable size lugs and testing complete all as specified and as directed by Engr-in-charge. |
| 110 | Supply and laying in trenches /laid in floor /duct /drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 sqmm 2 core and connecting up incoming/ out going cables connection with suitable size lugs and testing complete all as specified and as directed by Engr-in-charge. |
| 111 | Material and labour for boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 Mpa working pressure complete all as specified and as directed by Engr-in-charge. |
| 112 | Supply and fix for with pole PVC cable loop box, size not less than 200x140x95mm, out door type, IP 65 including 4 Nos aluminum bus bar of size 25x5mm mounted on porcelain insulators with oneMCB SP 6 Amps 230 volts connected to street light fitting submain wire and using flat iron clamps of size 20x3mm for fixing of PVC cable loop box with pole, including nuts, bolts and washers and connecting the cables to bus bars with using suitable size GI nuts, bolts and washers and aluminum lugs etc., complete all as specified and as directed by Engr-in-charge. |
| 113 | Material and labour for shifting of existing LT pole at new loaction including disconnecting of electric connection, excavation, returning filling and PCC all as per site requirement complete all as specified and as directed by Engr-in-charge.Notes: (i) Quoted rate inclusive of removal of existing LT pole in safe position including excavation, T&P, manpower and disconnection of all electric connection.(ii) Quoted rate inclusive of fixing of LT pole at new location not more than 20m including excavation, returning, filling in, including spreading, levelling, watering and well ramming, removing and PCC and coping as per SSR specification.(iii) Quoted rate inclusive of electric connection. |
