|
| 1 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 2 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed. |
| 3 | M&L for applying two coats ofsynthetic enamel paint over one coat of red oxide, complete all as specified and directed. |
| 4 | M&L for Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc., complete all as specified and directed. |
| 5 | S&F in stainless steel curtain rod side brackets decorative type of approved quality, complete all as specified and directed. |
| 6 | S&F in repair 25 mm dia stainless steel curtain rod, decorative type with finials etc., complete all as specified and directed. |
| 7 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 8 | M & L for Granite18- 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of graniteflooringincluding 20 mm thick screed bedding in cement mortar 1: 6 and all other similar works, complete all as specified and directed. |
| 9 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and directed. |
| 10 | M & L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in leveling course to floor, complete all as specified and directed. |
| 11 | M&L for double chargedVitrified Ceramic colouredtilesof size of tiles exc0.42 Sqm But Not Exc .1.0 Sqm in each tiles(square/ rectagular) polished,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tiles including 15mmthick screed bed layer in CM (1:6), complete all as specified and directed. |
| 12 | M&L forNon Skid ceramic coloured tiles 7 to 8 mm thickjoint free (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm ,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6), complete all as specified and directed. |
| 13 | M&L for Glazed ceramic tiles in vertical surface 600x 300x7 mmthick joint lesstiles set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc. (1st quality/Premium Quality),complete all as specified and directed. |
| 14 | S & F in factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum specification as per IS 15931: 2012 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast unserviceable fast/lugs/SS dash fasteners of required dia and length, complete all as specified and as directed by Engr-in-Charge.Make:- M/s Navratan Specialty Chemical LLP (Gujrat)/ M/s Sintex Industries Ltd/ M/s Accucell/ M/s Dura Plast Extrusion. |
| 15 | S & F in factory made28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size,modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof specification as per IS 15931: 2012 and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed by Engr-in-Charge.Make:- M/s Navratan Specialty Chemical LLP (Gujrat)/ M/s Sintex Industries Ltd/ M/s Accucell/ M/s Dura Plast Extrusion. |
| 16 | S & F in repair Bathroom cabinet mirror of hard thermosetting plastic of size 540x340x130 mm fitted with superior quality distortion free 4mm thick mirror, fixed in repairs, complete all as specified and directed.Make-Prayag Cat Part No BA-12or techno-commerically equivalent model in Jaquar / Cera or as approved by GE. |
| 17 | S&F in repairBrass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 18 | Supply and fixingof 15 mm bore overhead shower250 mm dia single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange completeall as specified and as directed by Engr-in-Charge. Make:- Cera Cat Part No F 7010503AB or of equivalent model in Hindware/Jaquar. |
| 19 | S&F in repair Toilet paper Holder fixing to wall, complete all as specified and directed.Make:-Jaquar Cat No.ACN-1151N or equivalent of makes in Cera/ Hindware as specified in the list of makes. |
| 20 | S&F in repair Towel Rail 600 mm long, complete all as specified and directed.Make:Jaquar Cat No.ACN-1111NM or equivalent of makesin Cera/ Hindware as specified in the list of makes. |
| 21 | Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx350mmx730mm \"white\" with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc., complete all as specified in Particular specifications.Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of \"Cera\" or equivalent model of make specified in list of make in particular specifications as approved by Enginr-in-Charge. |
| 22 | S&F in repair jet spray with flexible pipe and holding screw other fittings etc., complete all as specified and directed. |
| 23 | S & F in repair Angle cock, 2 way, with wall flange 15 mm dia including fixing to pipe, fixed in repair,complete all as specified and directed. Make :- Prayag cat no. 6711, techno-commercially equivalent model in Jaquar or Cera. |
| 24 | Supply and fixing of 15 mm bore overhead shower250 mm dia single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long(light weight) round shape with wall flange, completeall as specified and as directed by Engr-in-Charge. Make:- Cera Cat Part No F 7010503AB or of equivalent model in Hindware/Jaquar. |
| 25 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flushball valve float & handle, waste pipe & brackets, complete set complete all as specified and directed. |
| 26 | S&F in rotational moulded polythenewater storage tanks, hoisted and fixed in position 500 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia, Nippule, complete all as specified and directed including dismantling of old PVC tank and removing to store. |
| 27 | S & F in repair CP Tumbler Holder, complete all as specified and directed.Make:- Cera Cat Part No F 5007107 or Equivalent of JAQUAR/ESS ESS/Cera/Hindware. |
| 28 | S & F in repair CP soap dish, complete all as specified and directed. Make:- Cera Cat Part No F 5003106SS/CA 306 or Equivalent of JAQUAR/ESS ESS/Cera/Hindware. |
| 29 | S&Fin repairs fancy type Pillar taps, castcopper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lattered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe of size 15mm diairon pipe, complete all as specified and directed.Make: Cera/Catalogue No-F1005451CH or equivalent in Hindware, Jaquar as approved. |
| 30 | S & F in repair 15 mm bore fancy type bib taps long body(two in one) cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule.complete all as specified and directed.Make:- Cera Cat Part No F 1015163 or Equivalent of JAQUAR/ESS ESS/Hindware as approved. |
| 31 | S & F in repairof 15 mm bore fancy type bib taps long bodycast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.Make:- Cera Cat Part No F 1015151 or Equivalent of JAQUAR/ESS ESS/Hindware as approved. |
| 32 | S & F in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower(with bush and piston Divertor fittings) with aerator, complete all as specified and directed. Make:- Cera Cat Part No F 1015401 or Equivalent of JAQUAR/ESS ESS/Hindware as approved. |
| 33 | Taking down 15 mm dia steel tubing and connections including accessary etc., complete all as specified and directed. |
| 34 | Supply and fixing 15 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed. |
| 35 | Taking down 20 mm dia steel tubing and connections including accessary etc., complete all as specified and directed. |
| 36 | Supply and fixing 20 mm bore galvanised steel water tubing \"medium grade\" with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed. |
| 37 | Supply and fix in repair vitreous china counter wash hand basin snow white miniumum size560mmx470mm fixed in grante slab including angle iron brackets below granite slabs & chromium plated brass coupling, complete all as specified in particular specifications. Make : Jaquar/parryware or equivalent in Cera/Hindware as approved. |
| 38 | S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore, complete all as specified and directed. |
| 39 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store, complete all as specified and directed. (measured overall as fixed along the centre line over fittings and accessories). |
| 40 | S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 41 | S & F of 75 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 42 | S&FPVC SWR (110) bends any radius, comlete all as specified and directed. |
| 43 | S&F of75 mm PVC (SWR) junction single, (singl T)(equal or unequal), ordinary or inverted (spigot or socket type) or with paralle oval access doorsbranches, complete all as specified and directed. |
| 44 | S& F in 110 mm PVC (SWR)vent cowl. complete all as specified and directed. |
| 45 | M&L in 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cement,complete all as specified and directed. |
| 46 | M&L for PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement, complete all as specified directed. |
| 47 | S&F in stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm, complete all as specified and directed. |
| 48 | S&F in stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm, complete all as specified and directed. |
| 49 | S&F in 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc., complete all as specified and directed. |
| 50 | S&F in 125mm size Butt hinges, extruded brass, with brass hinge pin, bright pol ished and fixed, type B-11 etc., complete all as specified and directed. |
| 51 | S&F in 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed etc., complete all as specified and directed. |
| 52 | S&F in 150mm long floor door stopper of ,brass body and tongue with hard drawn steel spring fixed in floor etc., complete all as specified and directed. |
| 53 | S&F in 150mm long Extruded brass handles, fabricated type polished etc., complete all as specified and directed. |
| 54 | S&F in repair venation blinds with roller or vertical type,level or ultima 100mm width of strip withnecessary pulling threads aluminium channel along with all arrangement fixed to wall, complete all as specified and directed.Make : Vistaor equvalent as approved by GE. |
| 55 | Dismantling boarding, like wall paneling or false ceiling in any description, fixed in any position with nails, complete all as specified and directed. |
| 56 | S&F in 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 57 | S&F in Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing duly fitted into the wall etc., complete all as specified and directed. |
| 58 | S&F in Plain fillets. square,rectangularin section exc 6 & not exc 13 Sqcm, clean sawn, secured with nails or brads. Etc., complete all as specified and directed. |
| 59 | S&F in 9 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work etc., complete all as specified and directed. |
| 60 | M&L for preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applyingone coat of synthetic enamel painting, complete all as specified and directed. |
| 61 | Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster, complete all as specified and directed. |
| 62 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 63 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, with mixing WPC @ 3% by wt of cement surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 64 | M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling,complete all as specified and directed. |
| 65 | M&L for preparing new plaster surfaces of ceiling and applying three coats of white wash over coat of primer, complete all as specified and directed. |
| 66 | M&L for preparing decorated plastered or unplaster surfaces of walls, wall projection of face of chajja, projected face of roof slab and face and sides of sunshade etc. By brooming down or steel wire brushing, scrapping down smoke soot moulds, moss and effloroscent salr ane treating oil and greese spots and applying one cote of weather proof paint (exterior emulsion paint) in camouflage pattern using mechanical means (Two or more combination design, pattern and colour shall be as approved by GE or as per existing cover new plaster surfaces of walls, complete all as specified and directed. |
| 67 | M&L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over one coat of primer including 1 mm thick wall care putty car, complete all as specified and directed by Engr-in-Charge. |
| 68 | M&L for complete removing existing treatment on wall & ceiling surface and applying two coats of oil bound distemper overover one coat of primer over 1 mm thick wall care putty, complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for complete removing existing treatmen two coat of weather proof paint (exterior emulsion paint)incamouflage pattern over one coat wall putty of minimum 1.5mm thickusing mechanical means (Two or more combination design, pattern and colour shall be as approved by GE or as per existingcomplete all as specified and directed. |
| 70 | M&L for complete removal of existing treatmenton ceiling surface and applying two coat of white wash, complete all as specified and directed. |
| 71 | M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper overover one coat of primer over 1 mm thick wall care putty, complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F in Providing & fixing false ceiling at all heights with fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG (Glass Fibre W Reinforced Gypsum) false ceiling tiles of pe Size 595 x 595 mm of approved texture, 12 design and patterns having moisture mi content less than 2%, humidity resistance ed- of 99%, NRCO.50 to 0.75 as per IS:8225:1987, Non combustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 X 32 mmn of length 600 mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) te 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L -shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to Center and 40mm long dry wall wood screws, The work shall be Carriod out as per specifications, drawing and asper directions of the Engineer-in- Charge incl removal of existing falseceiling. |
| 73 | M& L for PCC 75mm thick type C-1 ,1:3:6 using 20mm graded curshed stone aggregate as in plinth protection, complete all specifiedas directed. |
| 74 | M & L for machineprecast concrete Hydraulic pressed rubber mouldedinterlocking coloured paver block glossy finish any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M- 35 grade with grey cement and pigment including 40 mm thick sand cushioning layer, complete all as directed and specified. |
| 75 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified as directed. |
| 76 | M&L forPCC 1:4:8 type D-2 (40mm graded aggregate) Cement concrete in foundations filling and mass concrete etc., complete all as specified as directed. |
| 77 | S & F for powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.(iv) Windows all around will be sealed with silicon sealant.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India. |
| 78 | S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple incl fixed in repair, complete all as specified & directed. |
| 79 | M&L for 5.0 mm thick sheet glass tinted colour frostedordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified & directed. |
| 80 | S & F in 10 mm thick toughened (tinted/plain) vaccum filled glass sound proof’ in double layer as in window/door, framing doors handle, suitable hinges, rubber beading, floor spring and all necessary fittings complete including dismantling of old glass any type, complete required as per site or directed by Engr-in-Charge all as specified and directed. |
| 81 | S & Fin 18-19 mm thick HDHMR board prelaminated one side with decorative choice lamination exterior grade , fixed with screw /hinges with frame wk as in cupboard and kitchen cabinet shutters and all other similar wks,complete all as specified and directed.Make - action tesla/grren ply/century ply or eqvt as per list of make. |
| 82 | S&F in cast brass handles , each 150mm long, complete all as specified and directed. |
| 83 | S&F in cast brass handles , each 100mm long, complete all as specified and directed. |
| 84 | S & F in cast brass butt hinges medium weight cold rolled 100 mm long, complete all as specified and directed. |
| 85 | S & F in cast brass butt hinges medium weight cold rolled 75 mm long, complete all as specified and directed. |
| 86 | S & F in magnet catcher for cupboard, complete all as specified and directed. |
| 87 | M&L for cutting out cracks to v-section in existing roofs or terraciv cleaning grouting with cement and sand slurry 1:3, complete all as specified and directed. |
| 88 | M&L for cutting grooves in brick wall 75mm wide and 65mm deep & shaping horizontal face of groove with cement, complete all as specified and directed. |
| 89 | Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof),complete all as specified and directed. |
| 90 | M&Lfor PCC 1:3:6 type B-1(using 20mm graded stone aggregate) for providing cement concrete as levelling and roof kerbs or mud stops, including finishing the surface with grinder to receive the acrylic based water proofing material, rounded or chamfered on edges etc., complete all as specified and directed. |
| 91 | M&L for preparation of new surface andapplying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm, complete all as specified and directed. |
| 92 | M&L for APP basedpolymeric water proofing membrane minimum weight 3.5 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS),laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer, complete all as specified and directed. |
| 93 | M&L for renderingor bedding layer15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with linesed oil @ 3% wt of cementinclduing finishing surfaces even and fair without using extra cement inclusive linesed oil, complete all as specified and directed. |
| 94 | M&L for sunkan portion incl demolation of existing PCC,WC,P/S Trap and removing the material out side MD land.& (a)preparation of RCC surface of sunken slab (floor) by brushing and cleaning throughly with water (b) application of two coats of poly urethane based chemical treatment (as per manufracture instruction DR FIXIT/FOSROC/CICO/STP) (c) 15 mm thick (1:4) plaster over chemical coating incl finished even & smooth without using extra cement, complete all as specified and directed.Note:- 1. continuty with cementitious water treatmentbeyond sunken portion in toilet shall be maintaned. |
| 95 | S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, complete all as specified and directed. |
| 96 | S&F Providing & fixing false ceiling at all heights with fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG (Glass Fibre W Reinforced Gypsum) false ceiling tiles of pe Size 595 x 595 mm of approved texture, 12 design and patterns having moisture mi content less than 2%, humidity resistance ed- of 99%, NRCO.50 to 0.75 as per IS:8225:1987, Non combustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 X 32 mmn of length 600 mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) te 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L -shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24x 24x 0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to Center and 40mm long dry wall wood screws, The work shall be Carriod out as per specifications, drawing and as per directions of the Engineer-in- Charge. |
| 97 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed. |
| 98 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with andincluding PVC concealed conduit of medium grade with all fittingsincluding Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dollyand including cutting chases in walls / floors for concealed conduitandmaking good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:-Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring. |
| 99 | (a) One light, fan, bell point controlled by one switch, complete all as specified and directed. |
| 100 | (b) One 3 pin switch socket outlet point 5 Amps on same board with other switch, complete all as specified and directed. |
| 101 | (c) All as per item No 98.02here-in-before butone3 pin 5 amp switch socket out let on independent board, complete all as specified and directed. |
| 102 | All as per item No 98.03 here inbefore but with 2.5 sqmm copper conductor cable for One 5 Amps socket outlet on independent board, complete all as specified and directed. |
| 103 | All as per item No 98.03 here-in-before but using 02 Nos 4.0 sq mm size for main cable and 01 No 4 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board, complete all as specified and directed. |
| 104 | All as per item No 99.00 here inbefore but with copper conductor cable for One 3 pin socket outlet, 15 amps independent with cable 2.5 Sqmm size, complete all as specified and directed. |
| 105 | M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 106 | Supply and fixing of Modular socket outlet 2 in 1, 5 pin, 6 Amps flush type white finish, complete all as specifiedand as directed. |
| 107 | M&L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed by Engineer in charge. |
| 108 | M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 109 | S & F of ceiling rose surface backlite 65x50mm 3 terminals, 240V grade, complete all as specifiedand as directed. |
| 110 | M&L forModular bell push 5 Amps 230 V, AC circuit, complete all as specified and directed. |
| 111 | M&L for call bell ding dong 230 V AC circuit, complete all as specified and directed by Engr-in-Charge. |
| 112 | Taking down old and u/s light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces, complete all as specified and directed. |
| 113 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 114 | Taking down carefully unserviceable DB any type/size disconnecting and making good disturbed surfaces, complete all as specified and directed. |
| 115 | Supply and fixing factory made epoxy powder coated distribution board TPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts, complete all as specified & directed. |
| 116 | Supply and fixing factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts, complete all as specified & directed. |
| 117 | Taking down carefully unserviceable MCB SP/SPN/Isolator of any rating/size, complete all as specified and directed. |
| 118 | Supply and fixing MCB single pole 240 volt \"C\" curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one, complete all as specified & directed. |
| 119 | Supply and fixing MCB single pole & neutral 240 volt \"C\" curve 10 KA 25 to 32Amps, complete all as specified and directed. |
| 120 | Supply and fixing MCB tripal pole & neutral 240 volt \"C\" curve 10 KA 40 to 100 Amps, complete all as specified and directed. |
| 121 | Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc., complete all as specified and directed. |
| 122 | M&L for concealed sub main wiring using two single core FRLSH PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of FRLSH PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor,complete all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit). |
| 123 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in to ground (earth pit) not less than 2.25 metres deep below GL with top edge of earth plate opt less attn. 1.50 m below ground levelsurrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead strip of 32x6 mm dia.(7.50 m Long) by means of nuts, bolts and washers, check nuts of GIand protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wire mesh, earthing test pointetc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways, with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as describedin electric plate of SI Part I completeall as specified and directed and testing on completion. Note :- Ifthe desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. |
| 124 | Supply and install Air Conditioner wallsplit units indoor/outdoor complete with cordless remote control unit and with in built air ionizer and Plasma filter for better indoor air quality with minimum 5 star rating and 2.00 Ton of capacity including copper pipe and wrapping insulation of pipe, complete all as specified and directed. |
| 125 | S & F of type sheet metal single pole and natural enclosure with two pin and ear plug and socket capacity 20-32 Amps modular type complete with one No SP MCB capacity 20-32 Amps, complete all as specified and directed by Engr-in-Charge. |
| 126 | Supply and fix of LED 2 x 2 ft backlite surface mounted fitting 36 Watts not less than 3200lm with Metallic CRCA powder coated body,complete allas specified and directed by Engr-in-Charge. |
| 127 | Supply and fix of MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, ‘C’ series fixed in DBs catered here-in-before, complete all as specified and directed. |
| 128 | Supply and fix MCB DB SPN 12 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting,complete all as specified and directed. |
| 129 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
