|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out inhard dense soil complete all as specified and directed. |
| 2 | As per item No:1 above here-in-before but exc 1.5M depth and n.exc 3.0M depth complete all as specified and as directed |
| 3 | Material and labour for cement concrete in foundations, filling and mass-concrete using type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed. |
| 4 | Material and labour formwork to sides of concrete foundations ( flat Rough finishedsurfaces ) concrete, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 5 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 6 | Material and labour for RCC M-30(20mm graded aggregate) as infoundations, including rafts, footings, foundation beams; plinth beams; bases for columns etc complete all as specified and directed. |
| 7 | Material and labour for RCC M-30(20mm graded aggregate) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 8 | Material and labour formwork to sides of pillars,posts, struts, piers, columnsfor square ,rectangular or polygones and stanchions finished even and fair complete all as specified and directed. |
| 9 | Material and labour formwork to sides and soffits of floor or roof beams(flat fair finished), beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 10 | Material and labour formwork to soffits of suspended slabs such as roof slabs, floorslabs (flat fair finished surfaces) landings and similar work;not exceeding 200mm thick(Horizontal or sloping) complete all as specified and directed. |
| 11 | Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | Material and labour for RCC M-30(20mm graded aggregate) as in Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed. |
| 13 | Material and labour for RCC M-30(20mm graded aggregate) as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 14 | Material and labour for Pre-cast cement concrete block masonry type C1 1:3:6(20mm aggregates) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 15 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed. |
| 16 | Material and labour for rendering 20mm thick in two layers(8+12) first layer 8mm with water proofing compound @3% by weight of cement) on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cementcomplete all as specified and directed. |
| 17 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in ceilings cement mortar 1:3 finished even and smooth with out using extra cementcomplete all as specified and directed. |
| 18 | Material and labour forpreparation of new surfaces on walls and applying two or more coats of OBD over a coat of primer on new work well finished including3mm thick wall care putty on newly plastered surface wall over a coat of primercomplete all as specified and directed |
| 19 | Material and labour forfinishing walls with acrylic smooth exterior emulsion ( Anti fungal Nature ) paint of ( as approved/ required shade) ofNew workover a coat of exterior grade primer (Two or more coat applied @ 1.67 ltr/10 sqmandexterior primer applied @ 2.20 kg/10 sqm)completed all as specified and directed |
| 20 | Material and labour for preparation of new plastered surfaces on ceiling and applying two coats of oil bound diatamper over a coat of alkali resistant primer complete all as specified as directed. |
| 21 | Supply and fixvitrified ceramic tileslight shade 10mm thick (square/rectangular) area of each tile exc 0.18 sqm butnotexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. complete all as specified and directed. |
| 22 | All as peritem no. 21 abovebut skirting over 10 mm thick CM 1:3 plater |
| 23 | Material and labourfor broken stone and boulders hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n exc 15cm thick broken stone or boulders , water and rammed to a true surfacecomplete all as specified and directed.. |
| 24 | Material and labour for 30mm thick PCC 1:2:4 (20mm graded aggregate) type B-1 as in floor complete all as specified as directed. |
| 25 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl WPC @3% by weight of cement , finished even and smooth with out using extra cementcomplete all as specified and directed. |
| 26 | Material and labour for preparation of roof surface by throughly wire brused, washed, dried up,cleaned all the foregin matters and dust and laying 4 mm thick APP modifiedmembrane minimum weighing 4kg/sqm reinforced with polyster non woven fabric (wt. not less than 160 gms/sqm) by torched application complete all as specified in PS by providing overlap minimum 100mm longitudnal and 150mm on transerve direction. All angles and similar projections should be sealed well with extra care to ensure full bondage , all joints and changes in direction should be curved with cement morter 1:3 mixed with WPC @3% by wt of cementcomplete all as specified and as directed. |
| 27 | Material and labour for 50mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection,floor topping etccomplete all as specified and directed. |
| 28 | Material and labour for powder coated anodised aluminium frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 29 | Material and labour for powder coated anodised aluminium window and ventilator shuttersside hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 30 | Material and labour for4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane complete all as spcd and directed by Engineer in Charge |
| 31 | Plain solid, straight chowkats and frames of second class hard wood wrought framed rabatted on the solid rounded or chamfered, put together with glue pinned at joints Complete all as specified and directed. |
| 32 | Supply and fix in 35mm tkflush shutters, solid core construction, with particle boardcore and plywood face panels, commercial type on both sides and both faces covered with decorativeface veneer with lipping/frame to match complete all as specified and directed. |
| 33 | Supply and fix 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. |
| 34 | Supply and fix 150mm long (Length of Bolt in mm) Aluminium anodised, barrel tower bolts of extruded section and fixedall as specified and directed. |
| 35 | Supply and fix 150mm (Size of Handle in mm) Aluminium handles, cast type, anodised all as specified. |
| 36 | Supply and fix 100mm Butt hinges or self closing hinges (Size of hinges in mm), heavy weight, cold rolled, stainless steel, and fixed all as specified. |
| 37 | Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pinkprimer completed all as specified and directed |
| 38 | Material and labour for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and directed |
| 39 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in ahrd and dense soil complete all as specified and as directed. |
| 40 | Removing excavated soilmaterial n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed |
| 41 | Dismantling of floor hearth and wall tilling incl cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises asdirected |
| 42 | Material and labour for non-skid ceramic tiles, coloured (of approved shade and design), 7 to 8mm thick, of superior quality, square / rectangular 400mmx400mm x7mm tk (area exceeding 0.11 Sqm but not exceeding 0.18 Sqm) , as in floors, etc.set and jointed in neat cement slurry and pointedmixed with colouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and as directed |
| 43 | Material and labour for glazed ceramic tiles, coloured (light colour as approved), of size300x 600 x7mm/ 350x250mm x 7mm / 450X 350X 7mm/450x300x7mm /300mmx200mmx7mm thick on vertical surfaces set and jointed in cement slurry over 10mm thick backing coatin cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified |
| 44 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified |
| 45 | Dismantling single layer mangalore pattern or similar tiles in roofing bedded in lime or cement mortar complete all as specified and directed. |
| 46 | Material and labour roof tiles, mangalore pattern, interlocking at side joints,, bedded in cement mortar 1:6 to old brick-workor masonry or RCC roof surfacewith any height of roof , incl necessary scaffolding etccomplete all as specified and directed. |
| 47 | Material and labour ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed. |
| 48 | Demolition of existing APP modified water proofing membrane roof treatment on roof,parapet and side projections including cleaning of surfaces complete all as specified and directed. |
| 49 | Material and labour for water proofing treatment to existing RCC roof slab including preparation of surfaces,side projections, parapet etccomprising with the following course of treatment/ specification from bottom to top:- (a) Applying oil bound bituminous primer @ 0.20 kg/sqm , over plastered surfaces of roof including parapet surfaces,side projections. Providing and laying 3 mm thick APP modified water proofing membrane, weight not less than 3.0 Kgs per Sqm, reinforced with non-woven polyester fabric of weight not less 150 gms per sqm having softening point not less than 140 degree centigrate , longitudinal tensile strength not less than 800N/sqcm, tearing strengh of 180N by tourch -on-application incl min 10cm side overlap & 15cm end laps and applying a tack coat of blown grade hot bitumen 90/15 over the membrane @1.20kg/sqm including cleaning surfaces(b) over the membrane finishing with solar reflective bituminous aluminium paint @ 0.10kg/Sqm |
| 50 | Material and labour for 10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane and mangalore pattern tiles,add WPC @3% of cement weight incl WPC ,finished even and smooth without using extra cement complete all as specified and as directed.(Note:- Polymeric membrane,manglore tiles & WPC shall be will be measured and paid separately) |
| 51 | Preparation of existing flat or sloped roofsurfacesincl racking out with loose dust ,grease old flake and chips etc and Crack filling with Dr fixitCrack \"X\" paste and wet the roof surfaces prior to coating to Dr fixit prime seal ( 50% Dilution ) and ensure dry for 4 -5 Hr as per Manufacture instructions andfinishing the roof/slopedsuraces gaps ,undulations filled with CM 1:4 or along withPCC 1:2:4 B-0 directed |
| 52 | Supply only Integral water proofing compound complete all as specified and as directed. |
| 53 | Supply and fix toPVC rain water gutterminimum 4mm thick and miniumumdepth of75mm fixed with necessarry boly washers etc incl provision outlet upto the bottom complete all as specified and directed. |
| 54 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 55 | Supply and fixsteel work in tubular trusses, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240complete all as specified and directed.. |
| 56 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings nails etc complete all as specified and directed. |
| 57 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 58 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,ridge etcfixed with self tapping screws as specified |
| 59 | Cutting channels, grooves or rebates exc 15 cm but n exc 30cm girth , and trimming surface With or with out reinforcement |
| 60 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in hard/dense soil including removing of soil complete all as specified and directed by Engr-in-charge. |
| 61 | Providing precast ce- ment concrete Type B1 1:2:4 (20mm graded agg )set in cement mortor 1:4 inlandings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelvesand similar articles with plain facescomplete all as specified and directed. |
| 62 | Demolition of brick work/solid block workbuilt in cement mortar including all quoins, pillars etc.complete all as specified and directed. |
| 63 | Material and labour for PCC 1:2:4 Type B1 (using 20mm graded stone aggregate) as in benching including weathering, slightly rounded or chamfered angles and throating including use and waste of form work complete all as specified and as directed. |
| 64 | Cutting into existing manholesof dia 110mm borefor connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required |
| 65 | Material and labour for PVC (SWR) pipe 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches/floors including necessary accessories (bends,T,Y ) etcincluding taking down/ dismantling old pipe all as specified. |
| 66 | Material and labour for 1:3:6 type C2 cement concrete bed (100mm thick) to drain pipes including packing under, and haunching against the sides of pipes with concrete after laid and tested for 110mm bore pipe all as specified and directed. |
| 67 | Material and labour for PVC (SWR) pipe 50mm dia single socketed, in any length with rubber ring joints, laid in trenches/floors including all necessary accessories (bends,T,Y ) etcincluding taking down/ dismantling old pipe all as specified and fixing with pcc complete all as specified & as directed |
| 68 | Taking down cement plastering any description on brick on stone walls including raking out joints, hacking for key, scrubbing down with water etc complete as specified by the manufacturer and as per directions of Engineer- in-charge |
| 69 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cementadding WPC @3% weight of cement complete all as specified and directed.(WPC measured and paid separately) |
| 70 | Taking down shuttersexe 1 Sqm not exe 2 Sqm each and refixing with same opening after Resecuring or easing &adjusting /cutting as required complete all as specified and directed.s |
| 71 | Taking down chowkats or frames n. exc 1.5 sqm each with shutter (without taking off Shutter) incl fixed portion etc complete all as specified and directed. |
| 72 | Taking down chowkats or frames exc 1.5 sqm and n.exc 4 Sqm each with shutter (without taking off Shutter) incl windows , doors fixed portion etc complete all as specified and directed. |
| 73 | Supply and fix30 mm thick,2nd class hard wood , glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etcfor doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified. |
| 74 | Supply and fix30mm tk plain, 2nd class hard woodframed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatsComplete all as specified and directed. |
| 75 | Supply and fixfiber glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame as in repair( incltaking Down u/sold PVC /UPVC/fRP Door shutters ) , complete as specified by the manufacturer and as per directions of Engineer-in-charge |
| 76 | Supply and fix30 mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick fRP laminate for panels conforming to IS: 14856, including fixing to framesry accessories like a door handle 02 Nos , Min 3 Hinges and with Both side Locking arrangements etc ( Tower Bolts ) Complete fittings , as in repair including to existing door frames with/ New Door frame etccomplete as specified by the manufacturer and as per directions of Engineer- in-charge |
| 77 | Supply and fixPowder Coated (mini thickness ofpowder coating 50 micron)Anodised aluminium frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 78 | Supply and fix in stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.etccomplete all as spd |
| 79 | 4 mmthick sheet glass of selected quality in squares and exceding 0.5 Sqm in each pane fixed withnecessary beadings or fixed with tracking section along with beadings . Gaskets etccomplete all as spd |
| 80 | Supply and fix in repair to 25mm dia Stainless steel Curtain Rod fixed with brackets , Knobs ,finial of 2 pieces ( Each side ) with necessary screews , plugs etc as in repair complete all as specified and directed.. |
| 81 | Supply and fix 15mm to 16mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittingstofittings in trenches/walls/ceiling concealed in wallarea and making necessaryholes and filling Gapswith PCC works , fittings are alsoincluded with necessary Elbow, Tee,socket, Reducer,Bushing,Step over head bends, End cap, End pugs ,union ,tank nipple ,etc also included in special fittings of( brass theating),male , female treads , adapters ,Brasstee & Reducers,Male Brass Threaded Adaptor , female Brass Threaded Adaptor(. flangeetcalso making Suitable size of brasstreadedto make a Completefittings of CPVC to match the CP/PTMTplumbing fittings as per std sizealso CPVC pipes shall be UV Stable, leak proof, tough, rigid and suitable for internal and external water supply applications inclCPVC yellow solvent cement to be used for pipe & fittings etc( including refixing the existing fittings)as in repair complete all as specified directed. |
| 82 | All as per item No 84 here-in- before but 20 mmbore pipe. |
| 83 | All as per item No 84 here-in- before but 25mmbore pipe. |
| 84 | Supply and fix in repair (including dismantling of existing water tank ) of 500 litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 85 | Supply and fix25mmlong handle CPVC ball valvefor 25 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent complete all as specified and directed. |
| 86 | Supply and fix20mmlong handle CPVC ball valve ( Gate Valve )for 20 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent complete all as specified and directed. |
| 87 | Supply and fixin repair 32mm bore waste coupling with waste pipe of PTMT (half or full threaded) (mini weight 32mm-45gms/40mm-60gms) for HWB sink etc complete all as specified and directed. |
| 88 | Supply and fix to health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 89 | Supply and fix in repair to ( IWC to EWC) vitreous China wash down water closet pan(European type) with P or S trap, snow white or whitecolour, fixing bolts, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, excluding flushing cistern and flush pipe including seat coveras in repair complete all as specified and directed. |
| 90 | Supply and fix in repair to brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 91 | Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed. |
| 92 | Supply and fix to soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and as directed. |
| 93 | Supply and fixPVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 94 | Supply and fix to grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms) complete all as specified and directed. |
| 95 | Supply and fix in repair to viterious China wash hand basin white flat back of size 550x400 mm ,includingcutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply of waste pipecomplete all as specified and directed. |
| 96 | Supply and fix in repair to 10 litres, cast iron, valveless. syphonic action type, flushing cistern, high level, with inlet, ball valve, float, chain and pull, and bracketsIWC/EWC OR Angilo Indian typeinclusiveof brackets , and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed. |
| 97 | Supply and fix in repair to Looking mirror fancy type of selected quality glass area exe0.35 Sqmin each pane and fixing withtiled wall surfaceswith 4 corner holes ,fixed withCP or SS Cleats /PVC rawl plugs with chromium plated brass screws and cup washers as in repair complete all as specified and directed. |
| 98 | Supply and fix to 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixedcomplete all as specified and directed. |
| 99 | Supply and fix in repair to brass chromium plated shower rose 125mm size with shower arm 15mm bore 195mm longincl 45 degreebendwith flange of PTMT any colour(mini wgt 40gms)complete all as specified and directed. |
| 100 | Supply and fixin repair 15mm bore Stop valves, fancy type cast copper alloychromium platedscrewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed. |
| 101 | Supply and fix in repair to 15mm bore fancy type CP Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and directed. |
| 102 | Supply and fix in repair to fancy typePillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 103 | Material and labour plain cement concrete (1:2:4), type B-2 using 40mm graded stone aggregate in surface channels and drains complete all as specified. |
| 104 | Demolition of unreinforced cement concrete in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and directed |
| 105 | Material and labour for 50mm tk cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection,floor topping etc , surfaces finished of concrete flooring with brooming complete all as spd u including provision of necessary construction joints complete all as directed |
| 106 | Material and labour for cement concrete in foundations, filling and mass-concrete using type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed. |
| 107 | Material and labour for chequered cement concrete tiles 20 x 20 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 20 mm screed bed in CM mortar 1: 6 complete all as specified and directed. |
| 108 | Forming jambs,with cement mortar 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed. |
| 109 | Material and labour for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new workwell finshed including 3mm thick wall care putty on newly plastered surface wall complete all as specified and directed. |
| 110 | Supply and fixhasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed. |
| 111 | Supply and fixtoMS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 112 | Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed |
| 113 | Material and labour for preparation of old paintedwooden surfaces of any description over 10cm width or girth and applying twocoats of synthetic enamel paint completed all as specified and directed |
| 114 | Material and labour for 20mm thick Granite (of any type & colour) work(table rubbed and polished)for wall lining (veneering towall) 12mm thickin cementmortar (1:3) and pointing with white cement (1:2)using marble dust with admixture of pigment to match with shade of granite including necessary adhesives etc complete all as specified and directed |
| 115 | Providing edge moulding to 18-20mm thick granite stone of any description of pillars,walls,counters vanitiesetc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed |
| 116 | Supply and fixtostainless steel(silver/golden) lettering embeded /fixed to granite wall of each letter sizen.exe 0.40m mirror polished, laser cut/fabricated as per approved design including fixing with stainless steel studs embedded in epoxy grout/adhesive complete all as specified and directed. |
| 117 | Supply and fixtostainless steel(silver/golden) emblem with precision detailingembeded /fixed to granite wall of each letter sizen.exe 0.60m mirror polished, laser cut/fabricated as per approved design including fixing with stainless steel studs embedded in epoxy grout/adhesivecomplete all as specified and directed.. |
| 118 | Supply and fixaluminium powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 119 | Supply and fixaluminium powder coated window and ventilator shutters, fixed Sqm type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed. |
| 120 | Supply and fix5.5mm thick sheet glass, ordinary quality and glazing with oil putty sqm in square exc 0.50 Sqm in each pane complete all as specified and directed. |
| 121 | Supply and fix9mm thick pre-laminated particle board interior grade, prelaminated Sqm both sides with decorative choice laminations, fixed to wooden/aluminium frame work as in door/ cupboard shutters complete all as specified and directed. |
| 122 | Providing and fixing shutters to existing concrete racks using HDHMR laminated board (18mm thick) and Using 5 mm ACP Sheet as Back Panel with aluminium frames including -all necessary fittings such as Hinges, Handle, locks, Channels etc complete all as specified and directed. |
| 123 | Material and labour for wall cabinets with necessary inside divisions and racks with complete fittings & accessories like hinges, channels ,handle, locks, Soft close Hinges and channels for cupboards & shelves etc. using HDHMR laminated board (18mm thick) complete all as specified and directed. |
| 124 | Material and labour for preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed |
| 125 | Material and labour for precast cover in RCC 1:2:4 Type B1 as in cover slabs set in cement mortar 1:4 including necessary formwork complete all as specified and directed. |
| 126 | Material and labour for cement concrete type - B-1 (1:2:4) using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 127 | Material and labour for cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in coping of drain complete all as specified and directed. |
| 128 | Material and labour forprecast cement concrete block masonry with solid blocks, Type C1 1:3:6 using 20mm graded stone aggregate exc 10cm in width and setting in CM 1:4 complete all as specified and directed. |
| 129 | Material and labour for 10mm thick rendering on concrete surfaces in CM 1:4 finished fair and even without using extra cement complete all as specified and directed. |
| 130 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard dense soil complete all as specified and directed. |
| 131 | Material and labour for 100 mm thick PCC 1:4:8 Type D2 40mm graged aggregate as in sub base floor complete all as specified and directed. |
| 132 | Material and labour for broken stone and boulders hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n exc 15cm thick broken stone or boulders , water and rammed to a true surfacecomplete all as specified and directed.. |
| 133 | Material and labour for cement concrete coloured tiles 30cm x 30cm x 20mm thick, machine pressed over 20mm thick screed bed in CM 1:6 and set jointed and pointed with grey cement with pigment in neat cement slurry in floors, and cut and polished complete all as specified and directed. |
| 134 | Removing excavated material exe 250m butn exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 135 | Material and labourfor one light point wiring on surface/cieling/Trusses/concealed controlled by one switch with PVC single core sheathed copper conductor multistranded cables FRLS 1.5 sq. mm size in PVC conduit complete all as specified and directed. |
| 136 | All as per item No 134 here-in-before but One 3 pin socket outlet 5 amps on same board complete all as specified and directed. |
| 137 | All as per item No 134 here-in-before but with cable 4 sqmm for One 3 pin socket outlet 15 amps on the independent board complete all as specified and directed. |
| 138 | Supply and fix modular switch 1 way, 6 Amps, 1 module complete all as specified and directed. |
| 139 | Supply and fixmodular socket, 6 A- 2/3 pin combined 2 module complete all as specified and directed. |
| 140 | Supply and fix modular socket, 6/16 A- 2/3 pin combined 2 module complete all as specified and directed. |
| 141 | Supply and fix modular switch 1 way, 16 Amps, 1 module complete all as specified and directed. |
| 142 | Supply and fixceiling rose, 3 phase/PVC/polycarbonate, isolated body, 65 x 50mm, 3 terminals complete all as specified and directed. |
| 143 | Supply and fix LED tube light fitting of 20 watt, Extruded aluminium housing enhances safety, high quality PC Diffuser, easy to install Efficacy 110/125 lumen/watt complete all as specified and directed. |
| 144 | Supply and fixSPN, 8 way MCB distribution board, with 200 Amps rated bus bar, double door flush type,with IP-54 protection, isolated neutral bars, door earthing, suitable for SPN/DP MCB/RCBO as incomer and SP MCB as outgoing complete with all accessories complete all as specified and directed. |
| 145 | Supply and fixMCB ,SPN 32 AMP rating suitable for 240 volts, AC Supply complete all as specified and directed. |
| 146 | Supply and fixMCB SP 6 to 32 Amps, 220 volts, 10 KA, \"B\" Series complete all as specified and directed. |
| 147 | Material and labour for 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc including clamps, nut, bolt and washers etc complete all as specified and directed. |
| 148 | Material and labour for Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for laying of pipes, cables, etc. getting out soft/loose soil complete all as specified and directed. |
| 149 | Material and labour for sand filling under floors or in foundations including watering and consolidation all as specified and directed for cable protection complete all as specified and directed.. |
| 150 | Supplying and laying unreinforced precast concrete cable cover, class LV, type 1, flat, size 250 x 150 x 40 mm, complete all as specified and directed. |
| 151 | Material and labour for laying of cable in existing cable tray including dismantling of cable tray cover and fixed after laying of cable including necessary nut, bolt etc required at site complete all as specified and directed. |
| 152 | Material and labour XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts earthed grade cross sectional area 10 Sqmm 4 corecomplete all as specified and directed. |
| 153 | Material and labour XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts earthed grade cross sectional area 70 Sqmm 3.5 corecomplete all as specified and directed. |
| 154 | Supply and fixing 3 phase, earth and neutral wall socket outlet 63 Amps IP 67 complete as specified and directed. |
| 155 | Supply and fixing of MCCB 63 A, 4 pole,DC 16 KA complete all as specified and directed. |
| 156 | Supply and fix thermoplastic polycarbonate VTPN DB 4 way, 415 volts with 200A bus bar in accordance with IEC-61439-3 hinged double door type shock proof, rust free, corrosion free, acid and chemical resistance, fire retardant, self extinguishing, PE+N terminals suitable to fix MCCB as incomer, IP 66 protection, flush type with glands, lugs etc for connection of cable complete all as specified and directed. |
| 157 | Supply and fixing 415V 10KA \"B\" curve miniature circuit breaker (MCB) of current carrying capacity 40 to 100 Amps, TPN/fP in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 158 | Supply,install,test and commisioning in replacement LT Panel,outdoor type, powder coated , dust and vermin and weather proof outdoor, Cubicle type, outer shell made out of 3.00 mm thick CRCA Sheet, factory fabricated, roof canopy, with front and back openable double door /openable by keys from both sides, louvers & air vent gasket for natuaral flow of air. Suiable gasket shall be used to make the outer shell completely vermin proof. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2.0 mm thick CRCA Sheat duly compartmentalised for each control gear with louvers and air vent gasket for natuaral flow of air and suiatable provision to accomodate incomer/outgoing MCCB\"s/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size \"f\" class insulators made on non hygroscopic, non combustile, track resistant, high strength fRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar complete all as specified and directed.Aluminium busbar for 3 phase,440 volts, 50Hz, 4 wire system of rating 160 Amps for phases and 100 Amps for Neutral.Incoming:-(a) MCCB 63 Amp fP 36 KA- 01 (Incoming)Metering Unit:- (a) R Y B Indications (LED Type)- 1 sets(b) Digital Multi function meter - 01 No.(c )CT\"s - 100/5A, CL-1,15 VA - 1 setOutgoing:-(a) MCCB40 Amp fP 36 KA- 02(b) Contactor 32 Amps , 3 pole, 415v |
| 159 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR with fittings, drain pipe etc as reqd at site complete all as specified and directed. |
| 160 | Supply and fix3 KVA capacity voltage stabilizer, copper wounded suitable for 1.5 TR splilt AC, automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of +/-2.5% and speed of correction 8V per second, fixed on wall with necessary arrangements complete all as specified and directed. |
| 161 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as specified and directed. |
| 162 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
