|
| 1 | EARTH WORKS |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 3 | All kinds of soil. |
| 4 | Filling availabte excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layerby ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 5 | Supplying and filling in plinth with sandy soil under floors including, cum watering,ramming consolidating and dressing complete. |
| 6 | CONCRETE WORKS: |
| 7 | Providingand layingcement concretein foundation and plinth excludingthe cost of centering andshuttering in |
| 8 | 1:4:8 ( 1cement:4 coarse sand:8 gradedstone aggregate 40mm nominal size) |
| 9 | 1:3:6( 1 Cement.• 3 coarse sand 6 graded stone aggregate 40 mm nominal size) |
| 10 | 1:5:10 ( 1cement:4 coarse sand:8 gradedstone aggregate 40mm nominal size) |
| 11 | Making plinth protection 50mm thick of cement concrete 1:3:6(1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 12 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (Icement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 13 | R.C.C. Work |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 15 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement. |
| 17 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 18 | Reinforced cement concrete work in beams, suspended floors,roofs having stope upto 15o 9 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 19 | RCC work in chimneys, shafts, upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1 :1.5:3 (1 cement: 1.5 c/sand : 3 graded stone aggregate of 20 mm nominal sizes). |
| 20 | Reinforcementfor RCC work including straightening, cutting, bending, placing in position and binding all complete. |
| 21 | a)Thermo-Mechanically Treated bars |
| 22 | Reinforcementfor RCC work including straightening, cutting, bending, placing in position and binding all complete. |
| 23 | a)Thermo-Mechanically Treated bars |
| 24 | FORM WORK |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 26 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 27 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 28 | Lintels, beams, plinth beams, girders, bressumers ands cantilevers. |
| 29 | Wall (any thickness) i/c attached pilasters butteresses, plinth and string courses etc. |
| 30 | Suspended floors, roofs, landings, balconies and access. |
| 31 | Stairs, (excluding landings) except spiral-staircases. |
| 32 | BRICK WORKS: |
| 33 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 34 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 35 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement : 3 coarse sand) insuperstructure. |
| 36 | Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 37 | Honey-comb brick work 10/11.4 cm thick with 1st class common burnt clay FP.S. (non modular) bricks in superstructure above plinth level and upto floor V level in cement mortar 1 : 4 ( 1 cement : 4 coarse sand) |
| 38 | WOOD WORKS |
| 39 | Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately |
| 40 | a) Local best quality uningthou Wood |
| 41 | Providing and fixing panellod or panollod and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.. |
| 42 | a) Local best quality Tolhao Wood |
| 43 | 35 mm thick shutters |
| 44 | Providing and fixing bright finished brass 100 mm mortice latch withone dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 45 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete |
| 46 | 250 x 16 mm |
| 47 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. Complete. |
| 48 | 250x10 mm |
| 49 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: |
| 50 | 125 mm |
| 51 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 52 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 53 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required ) and fitting the same with necessary stainless steel. |
| 54 | FLOORING |
| 55 | Cement concrete flooring 1:2:4 (I cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost Of nosing of steps etc. complete. |
| 56 | 40mm thick with 20mm nominal size stone aggregate. |
| 57 | Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (I cement : 3coarse sand) finished with a floating coat of neat cement. |
| 58 | 18 mm thick |
| 59 | Providing and laying vitrified tiles in different sizes (thickness to be specefied by manufacture), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement motar 1:3 (1cement:3c/sand), jonting with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 60 | sizes of tile 600x600 mm |
| 61 | Providing and laying Vitrified tiles in floor in diffe rent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.080/0 and conforming to 19.15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will bo done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubbermallet for placing the tiles gently and easily. |
| 62 | Sizes of Tiles 600x600 mm (Double charged) |
| 63 | Marble stone flooring with 18mm thick marble stone (sample Of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with. |
| 64 | Raj Nagar plain |
| 65 | Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 66 | Marble tiles(polised) Raj Nagar 8mm thick |
| 67 | ROOFING AND CEILING: |
| 68 | Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 120 gms/ sqm (both sided inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to cecost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed. all complete as per drawings, and specification and direction of the Engineer in Charge but excluding the cost of painting with |
| 69 | 12.5 mm thick tapered edge gypsum fire resistant boardconforming to IS: 2095- Part l |
| 70 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerin-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using selt drilling Iself tapping screws ot size (5.5x 55 mm) with EPDM seal,comptete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with |
| 71 | Precoated galvanised iron profile sheets 0.50 mm thick |
| 72 | Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or C.I. seam bolts and nuts, G.l. plain and bitumen washers complete |
| 73 | Ridgesm plain (500-600mm) |
| 74 | Precoated galvanised iron profile sheets 0.50 mm thick |
| 75 | Gutter (600 mm over all girth) |
| 76 | Precoated galvanised iron profile sheets 0.50 mm thick |
| 77 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting. hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. |
| 78 | Etectric resistance or induction butt welded tubes |
| 79 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required |
| 80 | In grating, frames, guard bar, radder, railing, brackets, gates and similar works |
| 81 | 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1cement : 2 c/sand : 4 graded stone aggregate 6 mm nominal size ) by volume hardening compound ix mix @ 2 litres per 50 kg f cement or sa per manufacturer specification. This include cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 82 | FINISHING: |
| 83 | 12 mmcement plaster of mix : |
| 84 | 1:3 ( 1 cement : 3 C/s ) |
| 85 | 15 mm cement plaster on rough side of single or half brick wall of mix. |
| 86 | 1:4 (1 cement: 4 coarse sand) |
| 87 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 88 | New work (two or more coats) over and including priming coat with cement primer:- |
| 89 | finishing walls with Acrylic smooth exterior paint of required shade : |
| 90 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm). |
| 91 | Applying one coat of cement primer of approved quality on wall surface. |
| 92 | water thinnable cement primer |
| 93 | Applying priming coat : |
| 94 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 95 | Providing and applying white cement based putty of average thickness Imm,of approved brand and manufacturer, over the plasterod wall surface to prepare thesurface even and smooth complete. |
| 96 | Painting with oil type wood preservative of approved brand and manufacture. |
| 97 | New work( Two or more coats) |
| 98 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS: 702 applied hot @ 1.45, 1.20 and 1.45 , Kg per square metre of area respectively, second and fourth courses• of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final . course of stone grit 6 mm and down size or pea sized gravel spread at 6 . cubic dm per sqm including preparation of surface but excluding grading, \" complete. |
| 99 | Providing Rain water Harvesting (RWH) |
| 100 | 1(one) & Passenger AUTOMATIC Lift (6 Passengers) |
| 101 | Self Adhesive PU Tactile Tile. |
| 102 | ADA Braille Signage. |
| 103 | SANITARY INSTALLATION |
| 104 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap. 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handlo lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 105 | White Vitreous china Orissa pattern W.C. pan of size 580 x 440 each as. 5,421.50 mm with integral type foot rests |
| 106 | Providing and fixing white vitreous china pedestal for wash basin eaccompletely recessed at the back for the reception of pipes and fittings |
| 107 | Providing and fixing P.V.C. tor sink or wash basin including P.V.C. waste fittings complete. |
| 108 | Flexible pipe |
| 109 | 32 mm dia |
| 110 | Providing and fixing 600x450 mm bovolod cdgo mirror of superior 1,053.30 glass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete. |
| 111 | Providing and fixing PTMT liquid soap container 109 mm wide, 125each 195.80 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 112 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 113 | Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, tenching, refilling & testing of joints complete as per direction of Engineer in charge |
| 114 | 75 mm dia |
| 115 | 110 mm dia |
| 116 | Water Supply |
| 117 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the wall etc. |
| 118 | 20 mm diameter |
| 119 | 25 mm diameter |
| 120 | Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. External work |
| 121 | 32 mm diameter |
| 122 | Providing and fixing C.P. brass bib cock of approved quality c |
| 123 | 15 mm diameter |
| 124 | Providing and fixing C.P. brass stop cock of approved quality |
| 125 | 15 mm diameter |
| 126 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 127 | 25 mm diameter |
| 128 | Providing and fixing gun metal non-return valve of approved quality (screwed end) |
| 129 | 32 mm diameter |
| 130 | horizontal |
| 131 | Providing and placing on tcrrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and tho baso support for tank. |
| 132 | 15mmcement plaster onroughside of single or half brick wall finished with a floating coat of neat cement of mix: |
| 133 | Neat cement punning |
| 134 | Supplying and fixing C.I. cover without frame for manholes : |
| 135 | 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg |
| 136 | Providing and fixingG.I. Pipes complete with fitting clamps, including cutting and macking good the wall etc. |
| 137 | 80 mm dia |
| 138 | Providing and fixing double flanged C.I. Duck foot bends 90 degree ( Heavy class) |
| 139 | 80 mm dia bend |
| 140 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. |
| 141 | Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5 mm. FR PVC insulated copper conductor single core cable in surface / recessed steel conduit with modular type switch modular plate, suitable G.I. box and earthing the point with 1.5 mm 2 FR PVC insluted copper conductor single core cable etc., as reqd. |
| 142 | Group - A |
| 143 | Group - B |
| 144 | Group - C |
| 145 | Wiring for twin control point with 1.5 sqmm FR PVC insulated copper conductur single core cable in surface/recessed steel conduit, 2 way modular type switch, modular plate suitable size GI box and earthing the point with 1.5 sqmm FR insulated copper conductor single core cable etc. as required. |
| 146 | Wiring for light pt/power plug with 4x4mm2 FR pvc ins. Cu.cond.s/c cable in surface /recessed steel conduit alongwith one no. 4mm2 FR pvc.ins.Cu.cond. s/c cable for loop earthing etc.as reqd. |
| 147 | Wiring for circuit/ Sub-main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed steel conduit etc. as reqd. |
| 148 | 2x2.5mm2+1x2.5mm2 earth wire |
| 149 | 2x4mm2+1x4mm2 earth wire |
| 150 | 2x6mm2+1x6mm2 earth wire |
| 151 | Supplying Wiring in existing conduit |
| 152 | Supplying and drawing (following pait) 0.5sqmm FR PVC insulated copper conductor unarmoured telephone cable in the existing surface/recessed steel/PVC conduit reqd. |
| 153 | 2 pair |
| 154 | TV Cable in existing conduit |
| 155 | Supplying and drawing Co-Axial TV cable RG-6 grade 0.7mm solid copper conductor PE insulated shielded with file tinned copper braid and protected in PVC sheath in existing surface/recessed steel/PVC conduit as reqd |
| 156 | S/F (following Modular type switch/socket) on the existing switch box i/c connectionetc.as reqd. |
| 157 | 5/6 amps. Switch |
| 158 | 2 way 5/6 amps switch |
| 159 | 15/16 amp.s switch |
| 160 | 3 pin 5/6 amps.socket outlet |
| 161 | 6 pin 15/16 amps.socket outlet |
| 162 | Telephone socket outlet |
| 163 | TV antenna socket outlet |
| 164 | S/F 25 amp Air conditioning power plug point i/c 4 module metal box on surface or in recess 4 modules plate and cover in front 25 amp modular starter 25 amp odular socket and 25 amp plug i/c connection etc as reqd. |
| 165 | Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd. |
| 166 | S/F (following size/modular switch plate base and cover plate for modular switch in recess SSS as reqd. |
| 167 | 1 or 2 module (75mmx75mm) |
| 168 | 6 module |
| 169 | 8 module |
| 170 | 12 module |
| 171 | S/F 3 pin amp ceiling rose on the existing junction box/wooden box i/c connection etc. reqd. |
| 172 | Supply and fixing Bell Push Modular Type |
| 173 | Providing and Fixings (following capacity TP & N) dis-connection fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board, making connection as reqd. |
| 174 | 400 amp. T.P. & N |
| 175 | S/F (following way) single door pole & neutral, sheet MCCB distribution board, 240V on surface/recessed complete with tinned Cu.bus bar neutral bus bar, earth bar, din bar detachable gland plate, interconnection, phosphatized and power painted i/c earthing etc.as reqd. (But without MCB/RCCB/Isolator) |
| 176 | 2+8way |
| 177 | S/F 5 amp. to 32 amp.rating 230V \"B\" series MCB for lighting and other load of (following pole) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. |
| 178 | Single pole |
| 179 | S/F (following rating) double pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd. (a) 63 amp. |
| 180 | 63 amp |
| 181 | S/F bus bar chamber with 4 strips Cu. Bus bar length 900mm suitable suitable for 200 amp.capacity complete with all accessories i/c connection earthing the body etc.as reqd. |
| 182 | S/F 48\" (1200mm) A.C. ceiling fan complete with down rod, canopy, 3 (three) blades but without regulator etc as reqd. (Make Bajaj/ Usha or similar |
| 183 | S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd |
| 184 | S/F 2 tone capacity split type Air conditioner, (Diamond, 3 star, 5G 29, G-SC 18 FD 3 WJH) complete with Indo oltage Stabilizer, Atomatic 4 KVA (140-280 for 2 ton). |
| 185 | Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required. |
| 186 | With CFL 12/15 Watts Lamp. |
| 187 | Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containingCFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required(havell,s /Bajaja/Phillips/Cromton). |
| 188 | Ceiling fitting (Surface) with 12/15 watt LED Lamp. |
| 189 | Supply, installation, testing and commissioning of 1 loop, compatable, microprocessor based intelligent Analogue Addressable Fire Alarm Control & Indication Panel, expandable to two loop, each loop can be capable of hauling minimum 99 addressable detectors and 99 addressable devices with 24 V SMF battery backup, charger circuit and 80 character LCD display module etc |
| 190 | Supply,Installation, testing and commissioning of Analogue Addressable Photo Electric Smoke Detector with mounting base, having protocol compatibility with Item No. (1) |
| 191 | Supply, installation, testing and commissioning of Analogue Addressable manual Call point, having protocol compatibility with Item No.1 |
| 192 | Supply and fixing ABC type fire extinguisher 4 kg |
| 193 | Supply and fixing CO2 type fire extinguisher 4.5 kg |
| 194 | Supply, installation, testing and commissioning of Analogue Addressable Fire Alarm sounder cum strobe, having protocol compatibility with Item No.1 |
| 195 | Supply, installation, testing and commissioning of Short circuit fault isolator Module, having protocol compatibility with Item No.(36) |
| 196 | Supply and drawing of 2Cx1.5 sqm & shielded tinned copper wire |
| 197 | Supply and laying of 25mm MS Conduit with accessories |
| 198 | 1.5sq mm copper cable with PVC conduit |
