|
| 1 | Civil Works |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m.In ground floor including roof.(b) above 150 mm. thick |
| 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis ofmeasurement of finished quantity of work) (ii) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth. |
| 4 | (c) Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration ) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS-6313 (part - II) 1981. (Mode of measurment will be per Sq.m. of plan area of plinth treated.) |
| 5 | Supplying and laying Polythene Sheet (150gm/sq.m) over damp proof course or below flooring or roof terracing or in foundation trenches. |
| 6 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per manufacturer\"s specification [Cement to be supplied by the Department] |
| 7 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 8 | Applying epoxy based reactive joining agent for joining the old concrete withfresh concrete to be applied within manufacturer\"s specified time as permanufacturers specification. (0.4 Kg / m² of concrete surface). |
| 9 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 10 | Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works,using cement @1.75 kg./sq.m. all complete including all materials and labour. (iii) 35 mm. thick |
| 11 | Supplying , fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap.(Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet |
| 12 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)(B) 450 mm lapping each way, (a) With 0.60 mm sheet |
| 13 | Applying Interior grade Acrylic Primer of approved quality and brandon plastered or cencrete surface old or new surface to receiveDistemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer\"s specification andas per direction of the EIC. (In Ground Floor)(b) Two Coats, i) Water based interior grade Acrylic Primer |
| 14 | Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacture\"s specification and as per direction of the Engg-in-Charge. (b) Two Coats |
| 15 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. a) Normal Acrylic Emulsion |
| 16 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : iv) Two coats (with any shade except white) |
| 17 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.(A) UPVC Pipes. 110mm dia |
| 19 | Supplying,fitting and fixing Turbine Air Ventilator is made of good quality stainless steel jindal made and neck dia. 24 inch, Turbine dia. 31 inch, Height 18 inch, centre shaft 30mm dia. SS outer jacket & 12mm dia. SS shaft, nett weight 6.5kg with 42 nos vanes & MOC- SS430 : 6.1 inch including 1.5mm thick Metal base Mounting base plate (3 feet x 3 feet & weight 4kg), Inner & ouer Arms MS with Electro zinc plating. |
| 20 | Electrical Works For Jhargram Krishak Bazar |
| 21 | Distribution wiring in 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC, 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required |
| 22 | Supplying & fixing 240 volt, 63 Amp sheet metal (16 SWG) Iron Clad Busbar chambers(2 x 20x5mm) on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991 |
| 23 | Distribution wiring in 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC, 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required |
| 24 | Supplying and fixing of (2+6) Way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with Supplying and fixing 240 V 40 A MCB Isolator on din rail of existing DBs and necessary connection.and Supplying and fixing 6 nos 240 V (6-16) A MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make -Havells or equivalent) |
| 25 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.Average run 12 mtr |
| 26 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish.On Board |
| 27 | Supply of 35 Watt PHOTON ULTRA PLUS High efficacy wellglass which consumes lesser energy and maintains high lighting levels. Luminaire efficacy of 140Lm/Watt to reduce quantity/wattage thereby reducing operational cost. Ingress protection of IP66. Available in Clear PC. Model No.CIP-311-35-57-HL4-CP-NSG (Make : Crompton /Equivalent ) |
| 28 | Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. |
| 29 | Excavation of soil for installation of Earth Electrode and filling & ramming for Soft Soil. |
| 30 | Earthing with 50mm dia G.I. pipe (TATA-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed. |
| 31 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. |
| 32 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. |
| 33 | S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required |
| 34 | Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S. |
| 35 | For Binpur-I Krishak Bazar |
| 36 | Distribution wiring in 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC, 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required |
| 37 | Supplying & fixing 240 volt, 63 Amp sheet metal (16 SWG) Iron Clad Busbar chambers(2 x 20x5mm) on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991 |
| 38 | Distribution wiring in 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC, 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required |
| 39 | Supplying and fixing of (2+6) Way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with Supplying and fixing 240 V 40 A MCB Isolator on din rail of existing DBs and necessary connection.and Supplying and fixing 6 nos 240 V (6-16) A MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make -Havells or equivalent) |
| 40 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.Average run 12 mtr |
| 41 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish.On Board |
| 42 | Supply of 35 Watt PHOTON ULTRA PLUS High efficacy wellglass which consumes lesser energy and maintains high lighting levels. Luminaire efficacy of 140Lm/Watt to reduce quantity/wattage thereby reducing operational cost. Ingress protection of IP66. Available in Clear PC. Model No.CIP-311-35-57-HL4-CP-NSG (Make : Crompton /Equivalent ) |
| 43 | Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. |
| 44 | Excavation of soil for installation of Earth Electrode and filling & ramming for Soft Soil. |
| 45 | Earthing with 50mm dia G.I. pipe (TATA-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed. |
| 46 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. |
| 47 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. |
| 48 | S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required |
| 49 | Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S. |
| 50 | For Binpur-II Krishak Bazar |
| 51 | Distribution wiring in 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC, 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required |
| 52 | Supplying & fixing 240 volt, 63 Amp sheet metal (16 SWG) Iron Clad Busbar chambers(2 x 20x5mm) on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991 |
| 53 | Distribution wiring in 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC, 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required |
| 54 | Supplying and fixing of (2+6) Way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with Supplying and fixing 240 V 40 A MCB Isolator on din rail of existing DBs and necessary connection.and Supplying and fixing 6 nos 240 V (6-16) A MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make -Havells or equivalent) |
| 55 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.Average run 12 mtr |
| 56 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish.On Board |
| 57 | Supply of 35 Watt PHOTON ULTRA PLUS High efficacy wellglass which consumes lesser energy and maintains high lighting levels. Luminaire efficacy of 140Lm/Watt to reduce quantity/wattage thereby reducing operational cost. Ingress protection of IP66. Available in Clear PC. Model No.CIP-311-35-57-HL4-CP-NSG (Make : Crompton /Equivalent ) |
| 58 | Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. |
| 59 | Excavation of soil for installation of Earth Electrode and filling & ramming for Soft Soil. |
| 60 | Earthing with 50mm dia G.I. pipe (TATA-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed. |
| 61 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. |
| 62 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. |
| 63 | S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required |
| 64 | Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S. |
| 65 | Add CGST @ 9% |
| 66 | Add SGST @ 9% |
| 67 | Labour Welfair cess @ 1% Please Enable Macros to View BoQ information |
