|
| 1 | ITEM NO. : 1 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-31 NS, PgNo 179) ( STATE DSR ) Item Spec: (Bd.F.5 Page No. 300 and B.7, Page.No. 38) & (RA NO. : 1) |
| 2 | ITEM NO. : 2 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-50 NS, PgNo 181) ( STATE DSR ) Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No.38) & (RA NO. : 2) |
| 3 | ITEM NO. : 3 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo26-05 NS, PgNo 184) ( STATE DSR ) Item Spec: (Bd.F.9 Page No. 303 and B.7, Page No.38) & (RA NO. : 3) |
| 4 | ITEM NO. : 4 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.....(INo26-33, PgNo 188) ( STATE DSR ) Item Spec: (Bd.F.17, Page No. 306) & (RA NO. : 4) |
| 5 | ITEM NO. : 5 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.....(INo23-02, PgNo 173) ( STATE DSR ) Item Spec: (Bd.C.3 Page No. 275) & (RA NO. : 5) |
| 6 | ITEM NO. : 6 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws & bolts, lead & bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.).....(INo38-04 , PgNo 233) ( STATE DSR ) Item Spec: (Bd.R.5, Page No. 453) & () |
| 7 | ITEM NO. : 7 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) ( STATE DSR ) Item Spec: (Bd.G.5 Page No. 315) & (RA NO. : 6) |
| 8 | ITEM NO. : 8 Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.....(INo32-26 , PgNo 210) ( STATE DSR ) Item Spec: (As directed by Engineer in Charge:) & () |
| 9 | ITEM NO. : 9 Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.....(INo32-27 , PgNo 210) ( STATE DSR ) Item Spec: (As directed by Engineer in Charge.) & () |
| 10 | ITEM NO. : 10 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.....(INo32-04, PgNo 209) ( STATE DSR ) Item Spec: (Bd. L.2 Page No. 368) & (RA NO. : 7) |
| 11 | ITEM NO. : 11 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.....(INo32-15 , PgNo 210) ( STATE DSR ) Item Spec: (Bd. L.10, Page No.370) & () |
| 12 | ITEM NO. : 12 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.....(INo32-11, PgNo 209) ( STATE DSR ) Item Spec: (Bd.L.7 Page No. 369) & (RA NO. : 8) |
| 13 | ITEM NO. : 13 Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.....(INo33-06, PgNo 213) ( STATE DSR ) Item Spec: (Bd.M.3 Page No. 380) & (RA NO. : 9) |
| 14 | ITEM NO. : 14 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.....(INo33-35, PgNo 216) ( STATE DSR ) Item Spec: (Bd. M.22 B/Page No. 390) & (RA NO. : 10) |
| 15 | ITEM NO. : 15 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.....(INo33-34, PgNo 216) ( STATE DSR ) Item Spec: (Bd.M. 3 B/Page No. 380) & (RA NO. : 11) |
| 16 | ITEM NO. : 16 Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. Complete. A) Flooring....(INo33-42, PgNo 217) ( STATE DSR ) Item Spec: (Bd.M.12 Page No. 385) & (RA NO. : 12) |
| 17 | ITEM NO. : 17 Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.....(INo33-81 , PgNo 221) ( STATE DSR ) Item Spec: (As directed by Engineer in Charge) & () |
| 18 | ITEM NO. : 18 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete....(INo39-08 , PgNo 246) ( STATE DSR ) Item Spec: (Bd-T-11 & 12, Page No. 482-483) & () |
| 19 | ITEM NO. : 19 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.....(INo33-68 , PgNo 220) ( STATE DSR ) Item Spec: (As directed by Engineer-In- Charge) & () |
| 20 | ITEM NO. : 20 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.....(INo39-58 , PgNo 257) ( STATE DSR ) Item Spec: (As directed by engineer-in-charge.) & () |
| 21 | ITEM NO. : 21 Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete.With powder coating without box....(INo39-44 , PgNo 254) ( STATE DSR ) Item Spec: (As directed by engineer-in-charge.) & () |
| 22 | ITEM NO. : 22 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.....(INo40-02 , PgNo 264) ( STATE DSR ) Item Spec: (Bd.U.1 Page No. 537) & () |
| 23 | ITEM NO. : 23 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.....(INo39-68 , PgNo 259) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 24 | ITEM NO. : 24 Providing and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc....(INo39-31 , PgNo 250) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 25 | ITEM NO. : 25 Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring....(INo33-28 , PgNo 216) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 26 | ITEM NO. : 26 Hand polishing to dado, skirting including cleaning, washing etc. complete.....(INo33-79 , PgNo 221) ( STATE DSR ) Item Spec: (As directed by Engineer in Charge) & () |
| 27 | ITEM NO. : 27 Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete.....(INo31-01, PgNo 205) ( STATE DSR ) Item Spec: (Bd.J.2 Page No. 355) & (RA NO. : 13) |
| 28 | ITEM NO. : 28 Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.....(INo31-09, PgNo 206) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & (RA NO. : 14) |
| 29 | ITEM NO. : 29 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.....(INo35-21 , PgNo 225) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 30 | ITEM NO. : 30 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.....(INo35-23 , PgNo 225) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 31 | ITEM NO. : 31 Providing and laying ceramic tiles having size 30 cm x 30 cm confirming I.S.15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. Complete.....(INo33-24, PgNo 215) ( STATE DSR ) Item Spec: (Bd.M.12 Page No. 385.) & (RA NO. : 15) |
| 32 | ITEM NO. : 32 Providing and laying ceramic tiles having size 30 cm. X 60 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete.....(INo33-27, PgNo 215) ( STATE DSR ) Item Spec: (Bd.M.13 Page No. 386.) & (RA NO. : 16) |
| 33 | ITEM NO. : 33 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete . Both side polish....(INo33-36 , PgNo 216) ( STATE DSR ) Item Spec: (Bd.M.35 B/Page No.393) & () |
| 34 | ITEM NO. : 34 Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete.....(INo42-83 , PgNo 283) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () |
| 35 | ITEM NO. : 35 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.....(INo42-30 , PgNo 277) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 36 | ITEM NO. : 36 Providing and fixing white european type wall-hung, of size 360mm x 360mm x 575mm with flush valve of approved make including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.....(INo48-30 , PgNo 314) ( STATE DSR ) Item Spec: (As directed by En-gineer in charge.) & () |
| 37 | ITEM NO. : 37 Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete.....(INo42-32 , PgNo 277) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 38 | ITEM NO. : 38 Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super Pillar tap with flange including all accessories etc complete....(INo43-39 , PgNo 292) ( STATE DSR ) Item Spec: (As Directected By Engineer Incharge) & () |
| 39 | ITEM NO. : 39 Providing and fixing 10 cm PVC nahani trap with grating etc. complete.....(INo42-67 , PgNo 281) ( STATE DSR ) Item Spec: (BD.V 32 A page 551 and as directed by Engineer in charge) & () |
| 40 | ITEM NO. : 40 Providing and laying in trenches 20 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.....(INo42-62 , PgNo 281) ( STATE DSR ) Item Spec: (BD.V 5 page 551 and as directed by Engineer in charge) & () |
| 41 | ITEM NO. : 41 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.....(INo41-63 , PgNo 272) ( STATE DSR ) Item Spec: (Bd.V.30 Page No. 565) & () |
| 42 | ITEM NO. : 42 Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.....(INo48-35 , PgNo 315) ( STATE DSR ) Item Spec: (As directed by En-gineer in charge.) & () |
| 43 | ITEM NO. : 43 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.....(INo42-28 , PgNo 277) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 44 | ITEM NO. : 44 Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.....(INo42-27 , PgNo 276) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 45 | ITEM NO. : 45 Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap & soil pipe connection up to the outside face of wall.....(INo41-60 , PgNo 271) ( STATE DSR ) Item Spec: (Bd.V.26 Page No. 564) & () |
| 46 | ITEM NO. : 46 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres.....(INo42-54 , PgNo 280) ( STATE DSR ) Item Spec: (As directed by engineer-in-charge.) & () |
| 47 | ITEM NO. : 47 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.....(INo42-20 , PgNo 276) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 48 | ITEM NO. : 48 Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.....(INo42-31 , PgNo 277) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () |
| 49 | ITEM NO. : 49 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete....(INo33-51 , PgNo 218) ( STATE DSR ) Item Spec: (A directed by Engineer in charge) & () |
| 50 | ITEM NO. : 50 Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge....(INo6-36 , PgNo 60) ( STATE DSR ) Item Spec: (MORTH 801) & () |
| 51 | ITEM NO. : 51 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes).....(INo19-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () |
| 52 | ITEM NO. : 52 BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).....(INo13-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () |
| 53 | ITEM NO. : 53 MORTOR Compressive Strength.( Set of 3 Cubes)....(INo27-VQC , PgNo 585) ( STATE DSR ) Item Spec: (As per Standard Specification) & () |
| 54 | ITEM NO. : 54 STEEL BAR TESTING Upto 16 mm (Set of 3 Bars)....(INo72-VQC , PgNo 586) ( STATE DSR ) Item Spec: (As per Standard Specification) & () |
| 55 | ITEM NO. : 55 BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity.Impact Value Crushing Value.....(INo2-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () |
| 56 | ITEM NO. : 56 Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness....(INo1-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () |
| 57 | ITEM NO. : 57 FLOORING TILES (MOSSAIC / CEMENT) Flooring of Natural Stone (Kota,Marble, granite,Tandur.etc.)-Water absorption,Specific gravity)....(INo15-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () |
| 58 | ITEM NO. : 58 CERAMIC TILES / VITRIFIED TILES Water Absorption, Moduls of Rapture (Set of 6 Tiles)....(INo16-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () Please Enable Macros to View BoQ information |
