|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth,1.5m in width as well as10 sqm on plan) including getting out and disposal of excavated earth lead upto50m and lift upto1.5m,as directed by Engineer-in-charge. All kinds of soil within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 3 | Stone masonry work in cement mortar in sub structure complete as per drawing and technical specifications clause 702,704,1202 and 1203 coursed rubble masonry (2nd sort) in cement mortar 1:5 (One cement: Five sand) within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 4 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in :Cement Mortar 1:6 (1 cement : 6 coarse sand). within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand). within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 6 | Providing wood work in frames of doors, windows, clerestory window sand other frames, wrought framed and fixed inpositionwithhold fast lugsor withdash fastenersof requireddia& length ( hold fast lugsor dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 7 | Providing and fixing panelling or panelling andg lazingin panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion insideg rooves or rebates to be measured).Panelling fo panelled or panelled and glazed shutters 25 mm to 40 mm thick : Kiln seasoned and chemically treated hollock wood within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 8 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : Kiln seasoned and chemically treated hollock wood within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above up to all floor within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 11 | a)Thermo-Mechanically Treated bars of grade Fe-500D ( Five hundred D) or more.within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 12 | Providing and fixing 45 cm wide screen made of MS hollow square sections of 50x50mm size 3mm thickness for main frame and MS hollow square section for distribution members 25mm x25mm size 3mm thick placed at equal distance between centre to centre duly welded with the main frame and decorative screen centre piece 23cm x45cm made to shape out of 20x3mm MS flat frame covered with black sheet along with vertical hollow square section of 75x75mm duly welded with main frame of the screen. The screen should be embedded or fixed in RCC pillars or welded in steel members and bottom of beam by mechanically means including priming coat of steel primer as per drawing/design and direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 13 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. wherever required, all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 14 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoatingnot lessthan grade AC10 as per IS:1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : 250x10 mm within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 15 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 16 | Making plinth protection 50mm ( Fifty millimetre ) thick of cement concreten1:3:6 (One cement : Three coarse sand (zone - III) : Six graded stone aggregate 20 mm ( Twenty millimetre ) nominal size) over 75mm ( seventy five millimetre ) thick bed of dry brick ballast 40 mm ( Forty millimetre )nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 17 | 15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 18 | 6 mm ( Six millimetre ) cement plaster 1:3 (One cement : three fine sand. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 19 | White washing with lime to give an even shade : New work (three or more coats) within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat withcement primer within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 21 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 22 | Applying priming coat: tes for external plaster are for height upto With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 24 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 25 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work.150 mm diameter pipes within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 26 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 500x500 mm within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 27 | Tile work in skirting, risers of steps and dado upto 2m height over 12mm thick bed of cement mortar 1:3 (1 cement :3coarse sand) and jointed with grey cement [email protected]/sqm, including pointing in white cement mixed with pigment of matching shade complete.Marble tiles (polished) Raj Nagar 8 mm thick within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 29 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 30 | Providing and fixing wash basin with C.I. brackets, 15 mm ( Fifteen millimetre ) C.P. brass pillar taps, 32 mm ( Thirty two millimetre ) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm ( Six hundred thirty x four hundred fifty millimetre ) with a pair of 15 mm ( Fifteen millimetre )C.P. brass pillar taps within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 31 | Providing and fixing 600x450 mm ( Six hundred thirty x four hundred fifty millimetre ) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 32 | Providing and fixing 600x120x5 mm ( Six hundred thirty x one hundred twenty x five millimetre ) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( Forty millimetre ) long screws, rawl plugs etc., complete within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 33 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm ( Six hundred millimetre ) long towel rail with total length of 645 mm, ( Six hundred forty five millimetre ) width 78 mm ( Seventy eight millimetre ) and effective height of 88 mm,( Eighty eight millimetre ) weighing not less than 190 gms.( One hundred ninety grams ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 34 | Providing and fixing toilet paper holder :C.P. brass within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 35 | Providing and fixing PTMT soap Dish Holder having length of 138mm,( One hundred thirty eight millimetre ) breadth 102mm,( One hundred two millimetre ) height of 75mm ( Seventy five millimetre ) with concealed fitting arrangements, weighing not less than 106 gms.( One hundred six grams ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 36 | Providing and fixing PTMT liquid soap container 109 mm ( One hundred nine millimetre ) wide, 125 mm ( One hundred twenty five millimetre ) high and 112 mm ( One hundred twelve millimetre ) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms ( One hundred five grams ) within all leads and lifts including carriage of materials in all respect and as per direction of Engineer-in-charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 37 | Providing and fixing 8mm diaC .P. /S.S.Jet with flexible tube upto 1metre longwithS.S. triangular plate to Eureopean type W.C.of quality and makeas approved by Engineer - in - charge. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 38 | Provinding and fixing PVC Floor trap of self clearing cleaning design incling fixing with approved adhesive cost of cutting and making good the wall floors etc. complete 110mm x 90mm within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 39 | Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 40 | Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 41 | Providing and fixing high preassure PVC spigot and socket, waster and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 75mm dia within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 42 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm ( Three hundred x three hundred millimetre ) size (inside) the weight of cover to be not less than 4.50 kg ( Four point five zero kilogramms) and frame to be not less than 2.70 kg ( Two point seven zero kilogramms) as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 43 | Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 44 | Providinga nd fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 45 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 46 | Providing and fixing high preassure PVC spigot and socket, waster and ventilating pipes ISI marked including fixing with approved adhesive etc. complete150mm dia within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 47 | Providing and fixing PVC door bend with oval acess 15 mm dia. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 48 | Providing and fixing PVC plain bend including fixing with approved adhesive complete . 110mm dia within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 49 | Providing and fixing PVC plain bend including fixing with approved adhesive complete . 75mm dia within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 50 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 51 | Providing and fixing Polyethelene-Aluminium PolyethelenePE-AL- PE Composite Pressure Pipes conforming to IS- 15450, V.stabilizedwithcarbon blackhavingthermalstability for hot& cold water supply, capabletowithstandtemperatureupto80°C, including all special fittings of compositematerial (engineering plasticblendandbrass insertswherever required)e.g. elbows, tees, reducers,couplers&connectorsetc.,with clampsat1.00metrespacing.Thisincludesthecostsof cuttingchasesand including testingof jointscomplete as per direction of the engineer in charge.1216 (16 mm OD) pipe within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. |
| 52 | Providing and fixing Polyethelene-Aluminium PolyethelenePE-AL- PE Composite Pressure Pipes conforming to IS- 15450, U.V.stabilizedwithcarbon blackhavingthermalstability for hot& cold water supply, capabletowithstandtemperatureupto80°C, including all special fittings of compositematerial (engineering plasticblendandbrass insertswherever required)e.g. elbows, tees, reducers,couplers&connectorsetc.,with clampsat1.00metrespacing.Thisincludesthecostsof cuttingchasesand including testingof jointscomplete as per direction of the engineer in charge.1216 (20mm OD) pipe within all leads and lift including carriage of materials and as per direction of Engineer-in- charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government including GST. Please Enable Macros to View BoQ information |
