|
| 1 | M&L for mild steel framed work of angle iron as in Fire points etc of Gde Fe-410 including necessary welding and Mild steel plain sheet in wall cladding, steel gates and similar work etc complete all as specified and directed.Note: Mild steel sheet and nu bolts etc as required shall be measured and paid separately under respective item of BOQ. |
| 2 | S&F Mild steel, plain, black sheet 3mm thickin wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed |
| 3 | S&F Mild steel bolts or anchor fastene bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long dia of neck exc 12 mm not exc 20 mm complete with filling material for anchor fastener complete all as specified and directed. |
| 4 | M&L for preperation of new steel surfaces of any description over 10 CM width or girth and applying two coats of synthatic enamel paints over and including a coat of zinc red oxide primer complete all as specified and directed. |
| 5 | Taking down cement plaster any description on brick or stone wall/ceiling including raking out joints, hacking for key and scrubbing with water etc. complete all as specified and directed. |
| 6 | M&L for 10 mm thick rendering in CM 1:6on concrete surfaces/ fair faces of bick masonry wallsand finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for 15 mm thick rendering in two layer i.e. 10mm thick backing coat in CM 1:6 and finishing coat 5 mm in CM 1:4 mixed with and including water proofing compound as per amnufacturers instructions on fair/ other than fair faces of brick masonry wall , finished even and fair etc complete all as specified and directed. |
| 8 | M&L for preparation of new plastered surfaces of wall and applying two coats of exterior acrylic emulsion paint over and including a coat primer complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of oil bound distemper over and including a thin layer of wall care putty and primer on wall surfaces incl finishing smooth complete all as specified and directed |
| 10 | M&L for writing letters or figures ( Block: Roman, Italic,Indian) not exc 30 cm high incl stops, commas,short lines, dashes,hyphens,brackets etc complete all as specified and directed. |
| 11 | M&L for providing Plain, galvanised, mild steel sheeting(2mm thick), in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 12 | S&FMild steel , Fe- 290 (Gde E-165) Framed work as in truss or column of angle or other section with gusset plates, rails, braces, etc. complete, drilledfor fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 13 | S&F 110 mm dia. PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 14 | S&F PVC (SWR) bends (110mm dia.) any radius complete all as specified and directed. |
| 15 | S&F PVC (SWR) junction single, (Single T) (110mm dia.) equal or unequal complete all as specified and directed. |
| 16 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 17 | M&L for 75mm thick cement concrete1:3:6 Mix, type C-2 (using 20mm graded stone aggregate ) as in flooring, finishing cement concrete surface even and smooth without using extra cementcomplete all as specified and directed. |
| 18 | S&F PVC (SWR) couplers (110mm dia.) complete all as specified and directed. |
| 19 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 20 | Dismantiling of floor hearth or wall tiling including cement mortar bedding (not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and directed. |
| 21 | Taking down urinals of any description and type complete all as specified and directed. |
| 22 | Demolition of stone slabs and tiles of any description or thickness in laid dry or laid pointed in any mortar complete all as specified and directed. |
| 23 | M & L for PCC 1:4:8 Mix,type D2 (using 40mm graded stone aggregate) as in fdn filling and mass concrete all as specified and directed. |
| 24 | M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 including provision of weep holes at every 2m complete all as specified and directed. |
| 25 | M&L for non skid ceramic coloured tiles 7 to 8mm thick 1st quality (square/rectangular) area of each exc 0.06 sqm but n exc 0.11sqmas in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface and over and incl screed bed or bedding layer of mortar 15mm thick laying floor finished in CM 1:6 complete all as specified and directed. |
| 26 | M&L for coloured glazed ceramic tiles (350x250x7mm/450x350x7mm)thick on verticle surfacesset and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 27 | M&L for 75 mm thick Cement concrete Type D2,1:4:8 Mix (using 40 mm graded gradedaggregate) as in sub bases,floor finishes and pavings complete all as specified and directed. |
| 28 | Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 29 | S&F 15mm bore GI tubing medium grade, galvanised with all fittings, fixed complete to wall and ceiling or laid in floor complete all as specifed and directed. |
| 30 | S&F 20 mm bore GI tubing medium grade, galvanised with all fittings fixed complete to wall and ceiling or laid in floor complete all as specifed and directed. |
| 31 | M&L for Cutting chases, pinning in making good to facings where reqd and pointing in cement mortar1:3 to ends or edges of shelves , for water tubing etc andmaking good, cutting exc 10cm girth but not exc 20cm girth in stone walls complete all as specified and directed. |
| 32 | S&F 1000 ltrs PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top ) hoisted and fixed in position all as spd in SSR part-I complete all as specified and directed. |
| 33 | S&F 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and directed. |
| 34 | S&F ball float valve PTMT with epoxy coated aluminimum rodfor 20 mm bore pipe high pressure with polythelene high density float and complete screwed for iron pipe complete all as specified and directed. |
| 35 | S&F 600x450 bevelled edged looking mirror 2mm thick of selected quality glass, mounted on 4 mm thick PVC sheet and with aluminnium frame work fitted with chromium plated brass screws and cup washers including taking old one complete all as specified and directed. |
| 36 | S&F in repair 15mm dia Bib taps cast copper alloywith fancy type chromium plated crutch or butterfly handle screwed down, scewed for iron pipes or for brass ferrule complete all as specified and directed. |
| 37 | S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs complete all as specified and directed. |
| 38 | S&F in repair 15mm dia angle valve/stop valves chromium plated, fancy type with long shank and cupscrewed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 39 | S&F15 mm dia Brass CP,wall mixer 3 in 1 system with provision for both hand and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (withoutoverhead shower)(concealed type) screwed both ends for iron pipe or for unions fancy type chromium plated for mixing hot and cold water screwed down for iron pipe complete all as specified and directed . |
| 40 | S&F brass chromium plated shower roses of 125 mm size with swivel joints including fixing to steel pipe or union, complete all as specifed and directed. |
| 41 | S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality complete all as specified and directed. |
| 42 | Supply and fixed in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 43 | S&F in repair tubular towel rail aluminium anodised 20mm dia, D type, 60 cm long with brackets complete all as specified and directed. |
| 44 | S&FPVC Door frames of size 50 mm x 47 mm made of 5 mm single side pr-lam colour PVC sheet and edges will be painted to match with pre lam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed. |
| 45 | S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out ofM.S.Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing in the frame at the site as per specification & drawing complete all as specified and directed. |
| 46 | S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 47 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed. |
| 48 | S&F Butt hinges, medium weight cold rolled 100 mm size ISI marked complete all as specified and directed. |
| 49 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed. |
| 50 | M&L 75mm PVC (SWR) floor trap , plain with grating including jointing with solvent cement complete all as specified and directed. |
| 51 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 52 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 53 | S&F75 mmPVC (SWR) bendsbends with or without access door complete all as specified and directed. |
| 54 | Material and labour for cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in copings, weathering, slightly rounded or chamfered angles and throating, benchingcomplete all as specified and directed. |
| 55 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed. |
| 56 | M&L 6 mm thick pelaminated particle board , interior grade, prelaminated both side with decorative choice laminations and fixed with screw or aluminium beading to aluminium frame complete all as sped and directed. |
| 57 | M&L for preparation of old painted surfacesand applying two coat of oil bound distemper complete all as specified and directed. |
| 58 | Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed. |
| 59 | Material and labour for point wiring for one light point or one fan pointor one fan point controlled by one switch with using 1.5 Sq mm (nominal area) stranded copper conductor single core, PVC insulated & unsheathed cable, 1100 volts grade in and incl concealed PVC conduit (medium grade) of suitable size all as specified and directed with using new sunken type pressed steel box/terminal boxes for mounting fittings/junction boxes not less than 1.6 mm thick duly painted with two coats of black bituminous paint over a coat of red oxide primer with and incl all accessories and using 1.5 Sq mm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. Make PVC cable .Havells/Finolex/PolycabNote : (i)The quoted rates shall be deemed to be inclusive foe cutting chases in brick walls/pillars etc for concealing the depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the portion of point wiring at RCC columns/ Beems/ Cielings shall be in surface conduit of suitable size fixed on surface plugs and provision of covering sunken boards/terminal boxes/junction boxes of any shape and size with 3 mm thick with suitable GI screws and cup washers.(ii)Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for seperatly of Sch’A’.(iii)The size of conduits shall be determined on permissible No of runs of wires as specified in SSR part I (2010) However minimum size of conduits shall be 20 mm dia (medium grade). |
| 60 | One light point/Fan point controlled by one one way switch. |
| 61 | One 3 Pin 5 Amp Socket outlet point 5 Amp on same board with other switch. |
| 62 | Description all as per serial item No.59 above but with 2.5 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed. |
| 63 | S&Fswitch piano Modular type single pole one way 6A, 1 Module complete all as specified and directed. |
| 64 | S&Fswitch piano Modular type single pole one way 16A, 1 Module complete all as specified and directed. |
| 65 | S&F Socket outlet, Moduler type, 6A, 2/3 Pin combined 2 Module complete all as specified and directed. |
| 66 | S&F Socket outlet, Moduler type, 6/16A, 2/3 Pin combined 2 Module complete all as specified and directed. |
| 67 | Supply and Fix for ceiling rose PVC polycarbonate isolated body 63.5x20 mm three terminalcomplete all as specified and directed. |
| 68 | S & FMCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.Note:Copper thimble shall be used for connection of cable . |
| 69 | Supply and Fix MCB, single pole 240 volts 6 to 32 Amps capacityC series fixed in DB\"s complete all as specified and directed. |
| 70 | Supply and FixMCB, single pole and neutral link240 volts 40 to 63 Amps capacityC series fixed in DB\"s complete all as specified and directed. |
| 71 | Supply and Fix LED batten 20 Watt with polycarbonate housing and diffuser AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable from ceiling rose to connector of the light, fixing the samecomplete all as per specified and directed. |
| 72 | S&F electric water heater, 25 Liter single phase steel body with copper inner tank and heating element upto 2KW having BEE 5 Star rating complete with all accessories, safety valve, thermostate, NRV and connecting pipe complete all as specified and directed. |
| 73 | M&L for providing earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead 4mm dia GI wire upto 7.5 meter long by means of bolts,nuts check nuts and washers of all galvanised iron or steel providing alternate layer of charcoal dust and salt providing alternate layer of charcoal and salt providing alternate layer of charcoal and salt providing alternate layer of charcoal and salt all as shown in electrical plate No.3 of SSR Part-1 and connected to test point including necessary excavation/ earth work in any type of soil/rock strata, PCC 1:3:6 type C1 cement concrete 1:2:4 type B1 reinforced with welded steel wire fabric (AMP) not less than 4 KG per Sqm funnel with wire mesh and watering pipe 20 mm dia bore (medium grade), PCC pit with 50mm thick PCC cover etc. including testing on completing including GI protection pipe 15mm dia light grade for earthing lead complete all as specified and directed.Note : Earth wire and protection pipe up 7.5 Mtr is deemed to be included in quoted rate. |
| 74 | M & L forsub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC Conduit or inconcealed conduit(as required & directed by Engr-in-Charge)accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and with 6 Sqmm earth wire, PVC insulated & unsheathed complete including taking down old unserviceable all as directed.Note: (i) Two runs of 6 sqmm and one run of6 sqmm cable and one run of PVC conduitshall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted . |
| 75 | M & L forsub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC Conduit or inconcealed conduit(as required & directed by Engr-in-Charge)accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and with 4 Sqmm earth wire, PVC insulated & unsheathed complete including taking down old unserviceable all as directed.Note: (i) Two runs of 4 sqmm and one run of4 sqmm cable and one run of PVC conduitshall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted . |
| 76 | Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding. |
