|
| 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc., butexcluding ashlar facing dressed stone works and pre-cast concrete articles all as specified and directed. |
| 2 | M&L for pre cast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) block masonary with solid block exc 10 cm width and setting in CM 1:6 complete all as spd. |
| 3 | M & L for rendering 15mm thick in CM (1:4) on brick and concrete surfaces finished even and smooth without using extra cement |
| 4 | M & L for preparating surfacesplastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified & directed |
| 5 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | M&L for Providing, cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing completeall as specified anddirected . |
| 7 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm grade aggregate) as in levelling coarse in roof padding complete all as specified and directed. |
| 8 | M&L for applying neat cement slurry with 3 kg of cement per sqm with mixing of liquid water proofing compound as per manufacturer instructions over surfaces roof, terrace, projection, chajjas, walls after prepration and cleaning of surfaces complete all as specified and directed. |
| 9 | M&L for rendering 10mm thick cement plaster in CM (1:3) on concrete surfaces of roof, terrace, projection, chajjas, walls(old or new), finished even and smooth (without using extra lime or cement)with mixing of WPC as per manufacturer instructions complete all as specified and directed.(Note : WPC shall be measured and paid separately) |
| 10 | M&L for Applying evenly a priming coat with bituminous primer at 4 Kg per 10 sq metre over plastered/concrete surfaces including prepration complete all as specified and directed. |
| 11 | M&L for laying of APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gm/sqm) by torched application method laid over as per manufacturer instructions complete and all as specified and directed. |
| 12 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 13 | M&L for Removing material or dubries retrives from above demolition or cleaningto a distance exceed 1.5 Km and not exceeding 5.0 Kmand depositing where directedcomplete all as specified and directed |
| 14 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 10 mm) with SRI(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet wallsin the same manner. |
| 15 | S&F in repairs20 mm CPVC PipeSDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenchesor fixed to wall/Ceilingcomplete all as specified and as directed by Engineer-in-Charge |
| 16 | -- Ditto -- All as per Item No 13 above but 25 mm dia bore |
| 17 | M&L for Disconnecting existing tanks, of capacity exc. 500 & not exc. 1000 let capacilty,setting aside (or lovering if required) for repairs, cleaning etc and hoisting if required reconecting and re-fixing in position (Cleaning , repairing etc. measured separately) complete all as specified and directed. |
| 18 | S&F in repairs including disconnecting tanks ,1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 19 | S&F in repairs including disconnecting tanks ,S&F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 20 | S&Fin repair 20 mm bore ballvalves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed. Make: Prayag & equivalent. |
| 21 | All as per item No 19 here-in-before but 25 mm dia complete all as specified and directed.Make: Prayag equivalent. |
| 22 | S&Fin repairs 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed |
| 23 | S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed |
| 24 | S&F in repairs 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed |
| 25 | S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed. |
| 26 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening after cutting by chishel or hand saw, peeling by plane, fixing/ re-placing of hinges, repairing etc including all nales screws, pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, shutters, etc. including painting or oiling to match, if required complete all as specified and directed.(Note : Hinges shall be measured and paid separately) |
| 27 | Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each and refixing old shutter in the same opening after replacing the chowkats or frames complete all as specified and directed .(Note : Chowkats or frames shall be measured and paid separately) |
| 28 | Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed . |
| 29 | Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqmeach complete all as specified and directed . |
| 30 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed. |
| 31 | S&F for pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate etc complete all as specified and directed. |
| 32 | S&F for pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate etc complete all as specified and directed. |
| 33 | S&F for 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and directed. |
| 34 | S&F for 35mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 35 | M&L for 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and directed. |
| 36 | M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 37 | M&L for preparation of New or previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed. |
| 38 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as specified and directed. |
| 39 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 40 | M&L for powder coated aluminium window / venilator frame with side hung shutters (fully glazed) and aluminium grill 7.50 mm thick as per design code No: 007 of dural grill or equivalent make as approved comprising of chokhat and shutters weight not less than 0.55kg/Rmincluding jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip, sheet glass 4.00mm thick glass of selected quality for panels, stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm, aluminium grill and aluminium hardware fitting fixed with steel chromium plated screws,100 mm size aluminium D type handles 01 No, 02 Nos 75mm size stainless steel medium weighthinges,02 Nos 100mm long aluminium tower bolts, one peg stay 150 mm long etc in each shutter, complete as per site requirement and asspecified and directed. |
| 41 | M&L for powder coated aluminium door frame with side hung shutters (fully glazed) comprising of chokhats section 101.04 x 44.45 x 1.5mm thick, shutter top rail 86.17 x 44.45 x 2.3mm, bottom and lock rail 150 X 44.45 X 2.3mm and style 53.7 X 44.45 X 2.3mm and including jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip, sheet glass 5.5mm thick selected quality with figured/ solar control film for panels and aluminium hardware fitting fixed with steel chromium plated screws such as 02 Nos disc type round handles, 03 Nos 100mm size hinges, 03 Nos 150mm long tower bolts, one floor door stopper with hard drawn steel spring 140mm long, 01 number of double action floor spring hydraulically regulated made upto minimum 1.25mm thick aluminium alloy sheet junction box for each leaf main body with stainless steel sheet cover governing pivot of brass, other parts made of mild steel heavy duty etc,including taking down old u/s door with frame,complete as per site requirement complete all as specified and directed. |
| 42 | S&F for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 43 | Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and directed. |
| 44 | S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed. |
| 45 | S&F for 3mm thick figured glass, pin head type and glazing with putty in square not exceeding 0.50 Sqm in each panecomplete all as specified and directed. |
| 46 | S&F for stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed. |
| 47 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples of any type of windows and doors i.e. wooden, steel or aluminium including opening and refixing of frame, shutter or shutter elements if required and new wooden beads in wooden doors complete all as specified and directed. |
| 48 | S&F for 100mm size butthinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 49 | S&F for mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and directed. |
| 50 | S&F for 150mm size Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed. |
| 51 | S&F for 150mm size aluminium anodized handle complete all as specified and directed. |
| 52 | M&L for 300mm size aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 53 | S&F for 140mmlength aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and directed. |
| 54 | S&F in repair 100mm size butthinges, medium weight, cold rolled mild steel,complete all as specified and directed. |
| 55 | S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and directed. |
| 56 | S&F in repair 150mm size Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed. |
| 57 | S&F in repair 150mm size aluminium anodized handle complete all as specified and directed. |
| 58 | M&L in repair 250mm size aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 59 | S&F in repair 150mm size Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 60 | S&F in repair 150mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 61 | M&L in repair 250mm size Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 62 | S&F in repair 140mmlength aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and directed. |
| 63 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering |
| 64 | S&F Pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering in any curvature, fixed with self tapping screws as specified. |
| 65 | Dismantiling wrought iron or mild steel work of any description not otherwise provided for etc comoplete all as specified. |
| 66 | S&F for Steel work in tubular trusses,post,purlin,rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 |
| 67 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410-W (Gde E-250) quality A,complete all as specified and directed |
