|
| 1 | Taking down chowkhats or framesexc. 1.50 sqm and not exc 4 Sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and directed by Engg In Charge. |
| 2 | Taking down chowkhats or frames not exc. 1.50 sqm each but with shutter (w/o taking of shutter from the frame ) including Windows /ventilators complete all as specified and directed by Engg In Charge. |
| 3 | Taking down shutters of any description exceeding 1.00 Sqm andn.exc 2.00 Sqmeach all as specified and directed. (The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item) |
| 4 | S & F for Framed work (Fe 410 -W (Gde- E- 250) quality-A)as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 5 | S&F 35mm thick(2nd Class hardwood) factory made gauzed and skeleton shutters, open rebatedand preparedto receive glass, gauze , etc (without sash bars) , edge of framingplain, chamfered or rounded, fittedwith cutand mitred beds for securing glass , etc, sizes ofmembers of shutters as specified in SSR Part I , Section 8 , Clause 8.20 (a) , Supplied and fitted to chowkats all as specified and directed. |
| 6 | S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter(2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed. |
| 7 | S&F 35mm thick flush shutters, solid core construction with block board core and plywoodface panels , commercialtype on both sides covered with decorative face veneer with lipping/frame to match all as specified and directed. |
| 8 | S&F 100 mm mild steel butt hinges medium weight, cold rolled all as directed. |
| 9 | S&F in repairs 100 mm mild steel butt hinges medium weight, cold rolled all as directed. |
| 10 | S & F aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed length of bolt 300 mm all as directed. |
| 11 | S & F in repairs aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed length of bolt 300 mm all as directed. |
| 12 | S & FAluminium, anodised, barrel tower bolts of extruded section 150mm long. |
| 13 | S & F in repairs Aluminium, anodised, barrel tower bolts of extruded section 150mm long. |
| 14 | S & F150 mm size extruded aluminium alloy handles,fabricated type anodised. |
| 15 | S & F in repairs 150 mm size extruded aluminium alloy handles,fabricated type anodised. |
| 16 | S&F in repairs 40mm width continuous (paino) hinges, mild steel, bright finishor electrogalvanised all as specified and directed |
| 17 | S&F in repairs 19mm thick prelaminated particleboard, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screwsto timber frame work as inshelves all as specified and directed. |
| 18 | S&F in repairs 12mm thick prelaminated particleboard, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screwsto timber frame work as inshelves all as specified and directed. |
| 19 | S&F in repair 18mm thick HDHMR BOARD exterior grade including any coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century. |
| 20 | S&F in repair 18mm thick HDHMR BOARD exterior grade including white coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century. |
| 21 | S&F in repair stainless steel cabinet/drawers handle having a length of 250mm and shape all as specified and directed. |
| 22 | S&F cup board knobs 40mm size with all fixing screws etc complete all as sepcified and directed. |
| 23 | S&F in repairs cup board knobs 40mm size with all fixing screws etc complete all as sepcified and directed. |
| 24 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square not exceeding0.5 Sqm in each pane all as specified and directed . |
| 25 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixing to new steel window with nut bolt,fixed complete all as specified and directed. |
| 26 | S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixing to new steel window with nut bolt,fixed complete all as specified and directed. |
| 27 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebeats including jointing cleat for fixing etc, complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 29 | S &F mild steel work in framed work such as grills framed guard bars, gratings, ladders etc with ends of bars shouldered and / or riveted or forged into spikes and similar work similar work conforming to Fe.290.Gde-E-165 |
| 30 | M & L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 31 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed. |
| 32 | S&F factory made PVCsolid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottomrail. MS frame shall be coverd withheat moulded plain coour PVC \"C\" channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panelling of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed. |
| 33 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 34 | Providing and fixing factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 35 | S & F stainless steel Butt hinges 75mm long, medium weight, cold rolled steel. |
| 36 | S & F in repair stainless steel Butt hinges 75mm long, medium weight, cold rolled steel. |
| 37 | S & F 125 mm size extruded aluminium alloy handles, fabricated type anodised. |
| 38 | S & F in repair125 mm size extruded aluminium alloy handles, fabricated type anodised. |
| 39 | S & FAluminium, anodised, barrel tower bolts of extruded section 125mm long complete all as specified and directed. |
| 40 | S & F in repair Aluminium, anodised, barrel tower bolts of extruded section 125mm long complete all as specified and directed. |
| 41 | Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip S&F in ordinary glass 4mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed |
| 42 | Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip S&F in repairs Figured glass, pinhead type 4mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed |
| 43 | M&L for preparation to new wooden surfaces of any description over 10 cm widthor girth and applying two coat of synthetic enamel paint over one coat of pink primer all as specified. |
| 44 | M&L for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primercomplete all as specified. |
| 45 | S & F in repairs tubular curtain rails 25mm dia stainless steel 202 grade drapery type complete all as specified directed |
| 46 | S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed |
| 47 | S&F in repairs drawer handles , mild steel , flush drop (65 to 75mmm grip) on 4 screw plate , includinglettin in all as specified and directed. |
| 48 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed. |
| 49 | S & F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed. |
| 50 | S&F in repairs 150mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floorall as specified and directed. |
| 51 | Cutting holes in brick walls in cement mortar for insertingholdfasts and making gooddismantled portion in cement mortar 1:3 or cement concrete1:2:4 type B-1 as required , depth of embedded portion ofholdfast exc half bricks and not exc one brick all as specified and directed |
| 52 | M & L for cement concrete 1:2:4 type B1 using 20mm graded aggregate for filling in holdfast all as directed. |
| 53 | Servicing of rolling shutter greasing/oiling serviceing for smoothy functioning for allparts including ball bearing, Spring, gear assembly,welding while required etc, rolling shutter push pull or manual type, size n exc 20 sqm complete all as specified and directed. |
| 54 | Servicing of rolling shutter greasing/oiling serviceing for smoothy functioning for allparts including ball bearing, Spring, gear assembly,welding while required etc, rolling shutter push pull or manual type, sizeexc 20 but n exc 30 sqm complete all as specified and directed. |
| 55 | S&F in repair MS Spring suitable for rolling shutter upto 20 Sqm. |
| 56 | S&F in repair MS Spring suitable for rolling shutter size exceeding 20 sqm but not exc 30 Sqm. |
| 57 | S&F in repair steel rolling shutters having 1.25mm thickness of laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type |
| 58 | S&F in repair MS ball beraing for rolling shutter. |
| 59 | Supply only Safety lever locks mild steel with 4 levers for rolling shutters. |
| 60 | Repairs to joinery works such as easing of doors, windows, kitchen cabinets, refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentry works assigned by the Engineer in Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately). |
| 61 | S&F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller androller plate complete all as specified and directed. |
| 62 | S&F in repairs mild steel 375mm, ordinary rat tail rod pattern springs including roller androller plate complete all as specified and directed. |
| 63 | S&F in repairsglass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long (size-150x150mm) with chromium plated guard complet all as specified. |
| 64 | S&F in repairs, magnet door stopper of size round or rectangular including all fittings fixed complete all as specified and directed. |
| 65 | S&F in repairs Mild steel Mortice lock of 2 levers, vertical type, size 100 mm for Aluminium/Flushed doors complete all as specified and directed. |
| 66 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. |
| 67 | M & L for Glazed ceramic coloured walls tilesin vertical surfaces 300x450/350x450/250x300 6mm to 7 mm thick set over and including of pigment matching to tile color including 10 mm rendering for screed bed on vertical surface of wall or concrete surfacesin CM 1:4 to receive wall tiles (Tile pattern and decoration may be as suggested by Engineer-in-charge). |
| 68 | M&L for rendering 10 mm thick onfair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement) |
| 69 | M & L for preparation of new plaster surface and applying two coats of oil bound distemper over a coat of 3 mm averagethick wall care putty and one coat of primer. |
