|
| 1 | Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials. |
| 3 | C.C.(1:4:8) with 4 c.m. size h.g. metal (crusher broken) in F&P. |
| 4 | Cement Concrete(1:2:4)with12 mm size Hard Granite Chips (Crusher broken) |
| 5 | Brick work with FLY ASH bricks inC.M(1:6) in foundation and plinth |
| 6 | 12mm thick cement plaster in C.M(1:4)over brick work including cement punning |
| 7 | R. R. H.G. stone masonry in C.M. (1: 6) in foundation and plinth works |
| 8 | Filling in foundation and plinth with excavated materials including watering and ramming |
| 9 | Brick work with FLY ASH bricks inC.M(1:6) in Super structure in Ground Floor |
| 10 | Brick work with FLY ASH bricks inC.M(1:6) in Super structure 1st Floor |
| 11 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for ground floor |
| 12 | (a) Column base, frustum, plinth band |
| 13 | (b) Lintel |
| 14 | (c) Column and beam |
| 15 | (d) Sun shade, loft and Chajja |
| 16 | (e) Roof Slab |
| 17 | (f) Stair |
| 18 | RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for 1st floor |
| 19 | (a) Lintel |
| 20 | (b) Column and beam |
| 21 | (c) Sun shade, loft and Chajja |
| 22 | (d) Roof slab |
| 23 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in ground floor |
| 24 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in First floor |
| 25 | 6mm thick cement plaster in C.M(1:4)R CC surfaces for ground floor |
| 26 | 6mm thick cement plaster in C.M(1:4)R CC surfaces for First floor |
| 27 | 20mm thick cement plaster in C.M(1:6) over stone work |
| 28 | 16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in ground floor |
| 29 | 16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in First floor |
| 30 | 12 mm thick cement plaster in c.m(1:6) over brick masonry, out side walls ground floor |
| 31 | 12 mm thick cement plaster in c.m(1:6) over brick masonry, outside walls first floor |
| 32 | 20mm thick cement plaster in C.M(1:4) as grading Plaster in Ground floor |
| 33 | wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 34 | Priming 1 coat over plastered surface of ground floor |
| 35 | Priming 1 coat over plastered surface of First floor |
| 36 | Finishing walls withweather coat paint of approved shade two coat to give an even shade including cost of paint in ground floor |
| 37 | Finishing walls with weather coat paint of approved shade two coat to give an even shade including cost of paint in First floor |
| 38 | Painting two coats to walls with Plastic emulsion Paint of approved shade on new work to give an even shade including cost of Paint in ground floor |
| 39 | Painting two coats to walls with Plastic emulsion Paint of approved shade on new work to give an even shade including cost of Paint First floor |
| 40 | Fixing of Vitrified tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles in Ground Floor. |
| 41 | Fixing of Vitrified tiles in dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles in Ground Floor |
| 42 | Fitting tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of Chequered tiles in Ground Floor |
| 43 | Fitting tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of Ceramic tiles |
| 44 | Supply, fitting and fixing of MS grill and ventilators including painting two coats over a coat of primer including cost of transportation. |
| 45 | Priming one coat with any approved red oxide over steel work |
| 46 | Painting 2coats with any approved iron paint on new iron work. |
| 47 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154,151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter framewith 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc.complete |
| 48 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete. |
| 49 | Supplying fitting and fixing of FRP door frame of size 75X100mm including drilling holes in Masonry walls |
| 50 | Supplying fitting of Factory made single Leaf Regid FRP composite door Shutter of 32mm thick,Laminated with GRP skins with wood grain finished fabricates using UV stabilised Isopthalic Gel Coat and layer of 450gsm E-glass chopped strand mat(csm) impregnated with Orthopathalic,Polyster resin including fitting all fixtures like hings,towerbolt,handle,aldrop with cost,conveyance and taxes of all materials and labour complete |
| 51 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification |
| 52 | Providing, Fiitting and Fixing of False Ceiling with Arm Strong Silhouette main runner, Cross Tee, Wall Angle with fine fissured RH-99 board on 4 walls to be fixed by means of steel screws, PVC plug & the Arm Strong grid 2\"0\"\" x 2\"0\" suspended from ceiling etc. complete |
| 53 | Providing, fitting & fixing of premoulded decorative corner beading of Model No. C-443 of GYPSUM INDIA LTD. having cross section dimension 112 X 80MM & fixing the same by providing PVC plug, screw, cornice adhesive, fevicol etc. complete in all respect. |
| 54 | Electrical works |
| 55 | Recessed wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FR PVC insulated single core multistrand copper conductor ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular G.I. box with modular base and cover of suitable size, G.I. box with 1.5 sq. mm FR PVC insulated copper conductor single core multistrand copper conductor as earth wire including all accessories and connection as per direction of the Engineer-in-charge. (Make of wire - Finolex/L&T/Anchor/Havells/VGuard) |
| 56 | Group-A (Short) |
| 57 | Group-B (Medium) |
| 58 | Group-C (Long) |
| 59 | Supplying and fixing of 5 pin 5/6 amp socket outlet modular type on existing switch box/cover including connections etc as required. |
| 60 | Supplying and fixing of 5/6 amp one way modular type switch on existing switch box/cover including connections etc as required. |
| 61 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular switch , modular G.I. box with modular base and cover of suitable size and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 62 | Point wiring for 15 / 16 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular switch , modular G.I. box with modular base and cover of suitable size and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 63 | Supplying and fixing of 6 pin 15/16 amp socket outlet modular type on existing switch box/cover including connections etc as required. |
| 64 | Supplying and fixing of 15/16 amp one way modular type switch on existing switch box/cover including connections etc as required. |
| 65 | Recessed wiring to Sub-main along with the following size of PVC insulated single core multistrand copper conducter ISI marked in 20 mm dia non metalic heavy duty PVC flexible conduit 1.6 mm thick along with FR PVC insulated single core multistrand copper conductor for loop earthing as required. (Make -Finolex/L&T/Anchor/Havels/V-Guard). |
| 66 | 2 x 2.5 sqmm + 1x1.5 sqmm run in 20 mm dia flexible conduit |
| 67 | 2 x 4 sqmm + 1x 1.5 sqmm run in 20 mm dia flexible conduit |
| 68 | 2 x 6 sqmm + 1 x 2.5 sqmm run in 25 mm dia flexible conduit (ADH office) |
| 69 | 2 x10 sqmm + 1 x 4 sqmm run in 25 mm dia flexible conduit (ADH office) |
| 70 | Supplying and fixing of 25 mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. |
| 71 | Supply, Installation, testing and commissioning of pre-wired 12 W LED Light fitting of all sizes complete with all accessories etc. directly on ceiling, excluding connection and earthing as required. (Make - Havells / Phillips/Bajaj). |
| 72 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required |
| 73 | Supply, Installation, testing and commissioning of pre-wired 12 W LED Circular Ceiling Light fitting of all sizes complete with all accessories etc. directly on ceiling, excluding connection and earthing as required. (Make - Havells / Phillips/Bajaj). |
| 74 | Supply, Installation, Testing, and Commissioning of following Amp DP Main switches (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge. Make- SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK |
| 75 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) |
| 76 | Supplying and fixing of Single Pole Neutral 6 amp to 32 amp rating 240 V \"B\" / \"C\" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. |
| 77 | Supply, Installation, testing and commissioning of ceiling fan ( 48\" decorative), including wiring the down rods of standard length (up to 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required. |
| 78 | Supply, Installation, testing and commissioning of stepped type modular fan regulator, in existing switch box including connection with 1.5 sq. mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required. |
| 79 | Providing and fixing extra down rod of 20 cm length G.I. pipe 15 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored. |
| 80 | Supply, Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good to the damage complete, connection, etc. as required. |
| 81 | Providing, laying and fixing of one number of PVC insulated and PVC seathed/XLPE power cable (10 sq. mm 4 core PVC armoured cables ISI marked) of 1.1 KV grade of size not exceeding 25 sq. mm on surface as required. (Cost for 50 m) |
| 82 | Supply and fixing of following rating double pole 240 V isolator in the existing MCB DB ISI marked complete with connection testing and commissioning etc. as required. |
| 83 | Supply, Installation, Testing and Commissioning of pre-wired 50 W LED Street light, Metal complete with all accessories and tube etc. including supplying and fixing ball socket arrangement, 2 no down rods of 20 mm dia x 1.6 mm thick steel conduit up to 30 cm length, painting and wiring the down rods and connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earting etc. as required. |
| 84 | Providing and fixing extra conduit down rod of 20 mm dia, 2 x 10 cm length wirng with 2 x 1.5 sq. mm FR PVC insulated single core multistrand copper conductor including painting etc. as erequired. ( Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) |
| 85 | Earthing with copper earth plate 600 mm x 600 mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having locking arrangement and watering pipe, etc. (But without charcoal and salt) as required. |
| 86 | Extra for using salt and charcoal for G.I. or copper plate earth as required. |
| 87 | Providing and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. |
| 88 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required. |
| 89 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing R.C.C. earth pit chamber, masonary wall work, masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required. |
| 90 | Extra for using salt and charcoal for G.I or copper pipe earth elctrrode as required |
| 91 | Supplying and fixing T.V. socket outlet modular type type ISI marked on the existing switch board / cover including connections etc as requird. |
| 92 | Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required |
| 93 | PH and Sanitary Works |
| 94 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of PVC pipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings of the following nominal bore with clamps fittings including making good the wall,ceilling and floor,testing all complite as per specification and direction of the Engineer -in-charge. |
| 95 | 15 mm dia PVC Pipe |
| 96 | 20 mm dia PVC Pipe |
| 97 | 25 mm dia PVC Pipe |
| 98 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CPVC pipes, confirming to IS:15778 having thermal stability for hot &cold water supplay,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m specing, with jointing the pipes with CPVC solvent cement and testing the joints complete as per specification and direction of the Engineer -in-charge. |
| 99 | 25 mm dia CPVC Pipe |
| 100 | Cutting grooves in pucca floors and walls for taking CPVC pipe s and making good the damages as per specification and direction of the Engineer -in-charge. |
| 101 | Cutting holes through existing brick work for taking CPVC pipe s and making good the damageswith cement morter (1:6) as per specification and direction of the Engineer -in-charge. |
| 102 | Cutting holes through existing in R.C.C. Floors and roofs upto 19 cm. for taking CPVC pipe s and making good the damageswith cement voncrete (1:2:4) as per specification and direction of the Engineer -in-charge. |
| 103 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Bib cock(Tapes)/CPittings of the following ISI approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge. |
| 104 | 15 mm dia CP Brass Short Body Bib cock . |
| 105 | 15 mm dia CP Brass long body Bib cock . |
| 106 | 15 mm dia CP flanges |
| 107 | Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Stop cock / CPittings of the following IS:781-1995 approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge. |
| 108 | 15 mm dia CP Brass Stop Cock |
| 109 | 15 mm dia CP Pillar Cock |
| 110 | Supplying, fitting, fixing of 15 mm dia CP concealed stopcock etc. Complete. |
| 111 | Supplying all materils,labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks (SYNTEX)conforming to IS 12701-1996 Including cutting holes through the tank and fixing mild steel tubes and fittings and providinng extra socket and jam nuts,fixing ball valave etc,including hoisting up to a height of extra 5 Meters above ground level and placing the tank to the required position etc, all as per speci fication and directionof the Engineer incharge. |
| 112 | 1000 liter capacity Syntex/FC Tank |
| 113 | Supplying, fitting, fixing of 15mm dia. PVC connection pipe for pillar cock, supply mains for wash basin etc. Complete. |
| 114 | Supplying all materials,labour,T&P and fitting, fixining following PVC items and filling of the following outside diameter conformoring to IS 13592 Type A, to walls with seal ring conforming to IS:5382,leaving 10 mm gap for 10mm thermal expansion,(1) single socket pipes as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge. |
| 115 | 75 mm dia U-PVC Soil, Waste, Rainwater pipes |
| 116 | 75 mm dia UPVC door Tee |
| 117 | 75 mm dia UPVC door bend |
| 118 | 75 mm dia UPVC plain Tee |
| 119 | 75 mm dia UPVC Cowl |
| 120 | 75 mm dia UPVC plain bend |
| 121 | 50 mm dia PVC plain bend |
| 122 | 50 mm dia UPVC pipe (4 kgf/cm 2 ) |
| 123 | 50 mm dia UPVC door bend |
| 124 | 50 mm dia UPVC plain bend |
| 125 | 75 mm x 50 mm dia UPVC R/Socket |
| 126 | 100 mm x 50 mm dia UPVC R/Socket |
| 127 | 110 mm dia UPVC pipe (4 kgf/cm 2 ) |
| 128 | 110 mm dia UPVC door Tee |
| 129 | 110 mm dia UPVC door bend |
| 130 | 110 mm dia UPVC plain Tee |
| 131 | 110 mm dia UPVC plain bend |
| 132 | 110 mm dia UPVC Cowl |
| 133 | Supplying all materials,labour,T&P and fitting, fixining ,laying in trenches High Density Polythine pipes conforming to IS-4984-1995 and specials of the following outside diameter conformoring to Class 1 to Class 3 and jointing by fusion welding method including testing as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge (Earth work in trenches measured separetly). |
| 134 | 110 mm dia H.D.Pvc Pipe |
| 135 | Supplying all materials,labour,T&P and fitting, fixining of white glazed vitreous china sqatting pan of size 580 mm x 440 mm size duly embedded in cement concrete (1:4:8) using hard granite metal 4 cm. nominal size and cement mortar (1:1),cutting the floor and mending good the damages etc,all complite as per specification and direction of the Engineer inchargr. |
| 136 | 580 mm x 440 size White glazed Virtious Odisha pattern squating pan Pan (Parry wire/Hindu stan make) |
| 137 | Supplying all materials,labour,T&P and fitting, fixining of Wash down water Closest (Europian type W.C pan) with Integral\"S\" or \"P\" trap conforming to IS 2556:Part 8-2004, to the floor with Wooden Plug And Chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc,,all complite as per specification and direction of the Engineer inchargr.(Without Seat &Cover) |
| 138 | White Vitreous China EWC Pattern with \"P\" Trap |
| 139 | Supplying all materials,labour T &P Fitting of 10 liters capacity PVC L L flushing Cistern with manually controlled device(handle lever) conforming to IS :7231,etc all complite as per specification and direction of the Engineer incharge. . |
| 140 | 10 Liters P.V.C.low level Flushing Cystern |
| 141 | Supplying all materials,labour T &P Fitting of Plastic Seat and cover for wash down water closet with cromium plated brass hinges and rubber buffer etc all complite as per specification and direction of the Engineer incharge. . |
| 142 | White Plastic Seat &cover with CP Brass Hinges |
| 143 | Supplying all materils,labour, T&P fitting,fixing of Long Bowl Pattern Urinal conforming to IS 2556: Part 6-1996 including connectiont the Urinalof Angle back 450x375x350 mm sizes respectvely with waste pipe by means of white cement(lead) mixed with chopped hemp etc ,as per specification and direction of the Engineer -in-charge |
| 144 | Virtious China -Angle Back Urinal of 450mm x 375 mmx 350 (Parryware/Hindustan) |
| 145 | Supplying all materils,labour, T&P fitting,fixing of glazed earthenware Ladies urinal (squating plate) of size 600 mm x 350 mm conforming to IS:2556-Part-6-1995 with integral longitudinal flushing pipe including embedding the plate 25mm cement morter (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal etc ,as per specification and direction of the Engineer -in-charge |
| 146 | Ladies urinal (Virtious china sqatting plate urinal) size 600mmx350 mm |
| 147 | Supplying all materils,labour, T&P fitting,fixing of Virtious China flat Wash basin over sizes 550 mm x 400 mm with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 148 | Virtious China flat wash basin of 550mm x 400 mm (Parryware/Hindustan) |
| 149 | Supplying all materils,labour, T & P fitting,fixing of PVC waste pipe for wash basin or sink i.e Flexiable (Coil shaped) PVC Waste pipe 40mm dia with length not less than 700 mm with PVC waste fittings etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 150 | Flexible (coil shaped) PVC waste pipe for sink & wash basin 32 mm dia with 900 mm long waste fittings |
| 151 | Supplying all materils,labour, T&P fitting,fixing of CP brass towel rail wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 152 | 25 mm dia x 600 mm long. |
| 153 | Supplying all materils,labour, T&P fitting,fixing of bevelled type plate glass mirror with wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 154 | 600 mm x 450mm |
| 155 | Supplying all materils,labour, T&P fitting,fixing of Cp soap Holder standard sizewith wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 156 | Supplying all materils,labour, T&P fitting,fixing of CP brass towel ring wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. |
| 157 | CP Brass Towel Ring |
| 158 | Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CP Brass Shower rose with CP revolving Shower with 15 to 20 mm inlet & 150 mm dia etc compliteas per specification and direction of the Engineer -in-charge. |
| 159 | Supplying all materials,labour and fixing of Brass Full Way Valve conforming to IS: 781-1995 of the 32 mm Full way Valves including all taxes etc complite as per direction by Engineer in charge. |
| 160 | Supplying all materials,labour and fixing of Brass Full Way Valve conforming to IS: 781-1995 of the 25 mm dia brass ball Valve including all taxes etc complite as per direction by Engineer in charge. |
| 161 | Supplying all materials, labour T&P and constructing Inspection chamber of the following sizes with c.C(1:3:6) using 40mm size h.g. metal on bed, Ist class K.B. brickwork in c.m (1:6), moulding and shaping the channel inside and benching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab Inside size 760mm x 760mm x 460mm with all complete Please Enable Macros to View BoQ information |
