|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 2 | In cement mortar |
| 3 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 4 | Of area 3 sq. metres and below |
| 5 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 6 | G.S. Sheet |
| 7 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 12 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 13 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 14 | 250x16 mm |
| 15 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 16 | 250x10 mm |
| 17 | 200x10 mm |
| 18 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 19 | 125 mm |
| 20 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 21 | Extra for providing and fixing wind ties of 40x 6mm flat iron section. |
| 22 | 12 mm cement plaster of mix : |
| 23 | 1:6 (1 cement: 6 coarse sand) |
| 24 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 25 | 1:6 (1 cement: 6 coarse sand) |
| 26 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. |
| 27 | New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 28 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade |
| 29 | New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 31 | Two or more coats on new work. |
| 32 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 33 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. |
| 34 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : |
| 35 | Old work (one or more coats) |
| 36 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : |
| 37 | Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. |
| 38 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 Coarse sand). |
| 39 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 40 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. |
| 41 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 42 | 45 cm length 15 mm nominal bore |
| 43 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. A) 10 litre capacity - White |
| 44 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(Flexible pipe.) |
| 45 | 32 mm dia |
| 46 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 47 | Rectangular shape 453x357 mm |
| 48 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 49 | 15 mm nominal bore |
| 50 | Providing and fixing C.P brass angle valve for basin mixer and geyser points ofapproved quality conforming toIS :8931 |
| 51 | 15 mm nominal bore |
| 52 | Taking out existing wooden door shutter, repair by cutting, chieseling etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 53 | Supplying and fixing C.I. cover without frame for manholes : |
| 54 | 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. |
| 55 | Providing & fixing White vitreous china water closet squattingpan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site completewith all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 56 | Orissa pattern W.C Pan of size 580x440 mm |
| 57 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 58 | Flat back wash basin of size 550 x 400 mm. |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 60 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. - Internal work - Exposed on wall. |
| 62 | 20mm nominal outer dia pipes |
| 63 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 64 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead as per direction of Engineer- in-Charge. (a) Internal Work - Exposed on wall |
| 65 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 66 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) |
| 67 | Removing blockage of existing sewer line by desludging , making arrangement of rodding , pumping , cleaning the sludge and disposal of the same beyond the municipal limits in prescribed environment friendly manner by mechanical transport then cleaning the sewer line with fresh water complete as per the site condition & as per direction of Engineer-in-Charge including pre-monsoon precautionary measures. . |
| 68 | Cleaning of existing manholes by desludging & making arrangement of rodding , pumping & cleaning the sludge and disposal of the same beyond the municipal limits in prescribed environment friendly manner by mechanical transport then cleaning the walls & floors with fresh water complete as per the site condition & as per direction of Engineer-in-Charge .(Circular or rectangular manhole of any depth or size) |
| 69 | Providing and fixing C.P. brass waste of standard pattern for sink or wash basin complete as per the direction of Engineer-in-charge:- |
| 70 | 32 mm dia |
| 71 | Providing and fixing C.P. brass pillar cock 15mm nominal bore of approved quality conforming to IS specifications complete as per directions of Engineer-in-charge. |
| 72 | Providing and fixingbrass ball valve with of approved quality (screwed end) : |
| 73 | 20 mm nominal bore. |
| 74 | Taking out of unserviceablematerials i/c dismantling fittings upto any floor height and stacking the same within 50 mtr. lead complete as per the direction ofEngineer-in-charge. |
| 75 | Brass bib cock/stop cook / pillar cock / gate valves/angle valves/ball cock/ball valve/waste couplings andlike items etc upto 40mm nominal bore |
| 76 | Aluminium/mild steel - handles /tower bolts/ slidingdoor bolts |
| 77 | Credit on account of unserviceable material received from dismantling, demolishing or lying at site issued to agency:- |
| 78 | Brass bib cock/stop cook / pillar cock / gate valves/waste couplings/angle valve/ball valve etc and like scrap. |
| 79 | PVC water tank,cistern ,pvc connections etc and like scrap |
| 80 | Dismantled Ply/board |
| 81 | Damaged G.I. sheets |
| 82 | Wooden Doors/windows of area 2.00 sqm or below |
| 83 | Old Bricks obtained from dismantling |
| 84 | Brick bats received from dismantling |
