|
| 1 | 1) Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 2 | 2) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 2a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | 2b) 1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | 3) Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 6 | 3a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 7 | 4) Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 8 | 4a) 300x16 mm |
| 9 | 4b) 250x16 mm |
| 10 | 5) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 11 | 5a) 250x10 mm |
| 12 | 5b) 200x10 mm |
| 13 | 6) Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 14 | 6a) 100 mm |
| 15 | 7) Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. |
| 16 | Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 17 | Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. |
| 18 | Two track two panels sliding window made of (small series) frame 52 x 44 mm &s ash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) |
| 19 | 8) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 20 | 9) Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. |
| 21 | 10) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 22 | 10a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 23 | 11) Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 24 | 11a) Orissa pattern W.C Pan of size 580x440 mm |
| 25 | 12) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 26 | 12a) W.C. pan with ISI marked white solid plastic seat and lid |
| 27 | 13) Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 28 | 14) Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 29 | 14a) Kitchen sink without drain board |
| 30 | 14a) (i)610x510 mm bowl depth 200 mm. |
| 31 | 15) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 32 | 15a) Rectangular shape 453x357 mm |
| 33 | 16) Providing and fixing sanitary fittings/appliances by removing the existing damaged sanitary and water supply fittings and replacing them with these new fittings including necessary white lead/ lead wool etc complete as directed by the engineer in charge. |
| 34 | 16 a) P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 35 | 16 b) solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid |
| 36 | 16 c)P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe.32 mm dia |
| 37 | 16 d)PTMT Waste Coupling for wash basinof approved quality and colour. 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 38 | 16 e) CP brass Waste Coupling for sink of approved quality and colour 50 mm dia of 83 mm length and 77 mm breadth. |
| 39 | 16 f) PTMT Bib cock15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour. |
| 40 | 16 g) PTMT stop cock15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. of approved quality and colour. |
| 41 | 16 h) PTMT pillar cock 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. of approved quality and colour . |
| 42 | 16 i) PTMT grating 100 mm nominal dia.Circular type, of approved quality and colour. |
| 43 | 16 j ) Uplasticised PVC connection pipe 15 mm nominal boreand 45 cm length with brass unions : |
| 44 | 16 k) C.P. brass shower rose 100 mm diameter with 15 or 20 mm inlet : |
| 45 | 17) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 46 | 17 a) 20 mm nominal outer dia. Pipes. |
| 47 | 17 b) 25 mm nominal outer dia .Pipes. |
| 48 | 17 c) 40 mm nominal outer dia .Pipes. |
| 49 | 18) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 50 | 18 a) 40 mm nominal outer dia. Pipes. |
| 51 | 19) Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 52 | 19 a) 25 to 40 mm nominal bore |
| 53 | 20) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 54 | (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 55 | 20a) Frame size 50 x 100 mm |
| 56 | 21) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 57 | (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 58 | 21a) 30 mm thick |
| 59 | 22) Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 60 | 22 a) L D - 2.5 |
| 61 | 22 a) (i) Size 600x450 mm or 450x450mm internal dimensions |
| 62 | 23) Removing the damagrd door frame from position, after removing hold fasts and making good the walls complete as directed by the Engineer-in-charge. |
| 63 | 24) Cleaning of existing Type-II or Type-III/IV/V staff quarter at all heights by removal of cob web, pigeon droppings, debris, unwanted, un serviceable abandoned material etc from all the rooms, dusting of walls, windows, doors, cubboards etc, washing the flooring of all rooms with detergent, washing the flooring and dado of toilets and bath room with the acid etc.,making them into useable/liveable conditions complete etc for immediate occupation of quarter as directed by Engineer-in-charge. Each quarter cleaning is measured as one job. |
| 64 | 25) Cleaning of existing Auditorium by removal of cobweb, pigeon droppings, debris, unwanted, un serviceable abandoned material etc from all the rooms, dusting of walls, windows, doors, cubboards etc, washing the flooring of all rooms with detergent, washing the flooring and dado of toilets and bath room with the acid etc.,making them into good condition complete etc as directed by Engineer-in-charge. Each time cleaning is measured as one job. |
| 65 | 26) Pruning/Cutting branches of trees at all levels for avoiding entering houses and obstructing colony lighting and electrical wire free passing and disposing the cutting pieces away from the compound to the dumping ground as directedby the engineer-in-charge. |
| 66 | 27) Repairs to existing PVC flushing cisterns as per directions of Engineer-in-charge.. |
| 67 | 27 a) Attending minor repair to flushing cistern by fixing Knob including washers,rope etc., complete for proper functioning of cistern |
| 68 | 27 b) Attending repair to flushing cistern by replacing suitable internal siphon system set ., for proper functioning of cistern |
| 69 | 27 c) Attending repair to flushing cistern by replacing suitable internal ballcock system set ,etc., for proper functioning of cistern |
| 70 | 28) Charges for minor Repairs to wooden panelled/flush doors / window setc., . Cost includes all labour for attending minor repairs like sides planing for proper functioning and refixing screws after attending necessary repairs etc., with necessary screws, nails etc., complete (Cost of wood will be paid separately,but i/c required screws ) |
| 71 | 28 a) Wooden door / window/Cupboards |
| 72 | 29) Providing and fixing/ replacing set of M.S brackets of required size for wash basin including painting to brackets etc., all complete as per the directions of Engineer-in-charge. |
| 73 | 30) Charges for demolising the existing WC pan with trap from position including surrounding lime concrete comple to minium required size to fix new WC pan with trap including jointing with the existing waste, refilling the surroundingswith lime concrete and finishining the floor with cement concrete flooring using required quantity of Fose Rock or equivalant liqued all complete as per the direction of Engineer-in Charge.(The rate includes the disposal of all the debries to the dumpimg ground) |
| 74 | 31) Providing clog cleaning of entair drainage system in the compound consisting of manholes, sewer lines, gully traps etc., including removing the sludge, silt, slash, waste etc., from the manholes and disposing the waste out side the compound etc., complete as per the direction of the Engineer-in-charge. (rate for cleaning of entair drainage system will be measured as one job) |
| 75 | 32) Cleaning of choked WCs (Indian/ European) and ensuring smooth flow etc., complete |
| 76 | 33) Cleaning of nahni traps/floor traps at all levels for removal of blockages including removing the silt, slush, waste etc ensuring smooth flow etc and applying white cement in tile joints of bath/WC including water proofing compounds (Like forsroc) etc wherever required to arrest leakages etc. |
| 77 | 34) Cleaning of the choked Gully trap Chambers and sewer line upto next manhole from the water entry outlet point in drainage system using rodding,wire/cables etc., to remove all the waste, debris etc., including disposal etc., as per the directions of Engineer-in-charge |
| 78 | 35) Cleaning of existing sanitary pipe alignment of 150/100 /75 mm dia in vertical or Horizontal direction of existing all floors by opening door tee/ bend at each floor , clearing the deposited obstacles including rodding and refixing the doors with new rubber washer and jointing the same job includes replacing door covers, bolts and nuts wherever required to arrest the leakage all as per directions of Engineer-In-Charge(Each opening of door bend and removal of blockages including above operation will be measured as one job.) |
| 79 | 36) Cleaning floors of all rooms Dadoing in kitchen and Toilets & including Kitchen platform of all types of quarter excluding toilets with cleaning liquids and water etc., complete and as directed by the Engineer-in-charge. |
| 80 | 37) Cleaning of the water meter by opening in the presence of water works authority for removal of debries/ occumulated dirt, soil etc., as per requirement and re-fitting the same in orginal position after completion of the cleaning operation including all incidental charges etc., complete as directed by the Engineer-in-charge. |
| 81 | 38) Removing the broken pipe/ coupling from the water line, cutting to required size, replacing with suitable uPVC pipe / uPVC coupling with the help of solution and refixing the pipe in original position on emergency basis (breakdown operartion) complete as directed by the Engineer-in-charge. |
| 82 | 39) Charges for making available the welding plant at site including to and from the shoap, providing necessary power supply arrangements, lugs etc., complete as per the direction of Engineer-in-charge. |
| 83 | 40) Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement complete as per standard design : |
| 84 | 40 a) Inside size 450x450 mm and upto 45 cm deep including pre-cast R.C.C. manhole cover and frame (LD-2.5) of size 450x450 mm internal dimensionsinternal dimensions |
| 85 | 40 a)(i) With common burnt clay F.P.S. (non modular) bricks of class designation 3.5 |
| 86 | 41) Providing and fixing PVC floor trap of100 mm inlet and 75 mm outlet of approved approved by Engineer-in-charge . |
| 87 | 42) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 88 | 43) Cleaning of terrace / canopy/ chajjas by removing leaves grass dust, rubbish and other deposited / accumulated materials etc including removal of blockages/chockages of khurras/spouts of terrace/chajjas etc and disposal of rubbish to the dumping ground out side periphery of the building. (plan area of the terrace/chajja/canopy will be measured for payment) |
| 89 | 43 a) Terrace area connected to blocked khurras and spouts & like. |
| 90 | 44) Removal of vegetation at walls/ roofs and floors/ drainage systems/ water supplying stream of the building/ over head tanks or at any location, pouring acid at the effected places and applying any special chemical to affectedarea to prevent future vegetation growth and finishing the same with cement concrete/ repair plaster to match the surface of walls/ floors/ roofs., etc complete as per the directions of Engineer-in-charge. (any cement concrete/repair plasteringdone shall be paid separately) (Uprooting of vegetation alongwith applying/sprayingrequisitechemicalin each location will be measured as one job). |
| 91 | 45) Providing and fixing CPVC ball valve in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete. |
| 92 | 45 a) 20 mm nominal bore |
| 93 | 45 b) 25 mm nominal bore |
| 94 | 45 c) 40 mm nominal bore |
| 95 | 46) Providing and fixing CPVC union in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete. |
| 96 | 46 a) 20 mm nominal bore |
| 97 | 46 b) 25 mm nominal bore |
| 98 | 46 c) 40 mm nominal bore |
| 99 | 47) Providing PVC SWR soil waste and vent pipes conforming to IS : 13592 Type B including jointing with \"T\" shaped seal/rubber ring conforming to IS : 5382 usingsolvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant). (i)Single socketed pipe |
| 100 | a) 110mm diameter |
| 101 | b) 75mm diameter |
| 102 | 48) Providing, laying and jointingunplasticised PVC Eco-drain unique wall structure (Number of \"holes\" in the wall thickness in longitudinal direction) pipes/ Manhole chambers/ Gully chambers of Type SN4 of Aashirwad Make or Equivalent conforming to IS : 16098, including joints & fittings with one step CPVC solvent cement, with solvent weld and rubber sealing rings including filling alround pipes up to required thickness with Stone dust/ robo sand/ river sand & testing of joints complete as per direction of Engineer in Charge. |
| 103 | 48 a) Pipes |
| 104 | 48 a) (i) 110 mm diameter |
| 105 | 49) Providing and fixing PVC SWR pipefittings/ Accessories conforming to IS : 14735 Type Bincluding cutting & replacing existing damaged CI fittings/accesories and jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 106 | 49 a) Plain bend of required degree |
| 107 | 49 a) (i)110mm bend |
| 108 | 49 a) (ii)75mm bend |
| 109 | 49 b) Tee with door |
| 110 | 49 b) i) 110X110X110 |
| 111 | 49 b) ii)75X75X75 |
| 112 | 49 c)Door bend |
| 113 | 49 c)i) 110mm |
| 114 | 49 c)ii) 75mm |
| 115 | 50) Providing and fixing sanitary fittings/appliances by removing the existing damaged sanitary and water supply fittings and replacing them with these new fittings including necessary white lead/ lead wool etc complete as directed by the engineer in charge. |
| 116 | 50)i) Providing and fixing PTMT health faucet with PVC pipe including holder complete etc., as directed by the Engineer-in-charge. |
| 117 | 50)ii) PTMTtwo in one bib cock 15 mm nominal bore. of approved quality conforming to IS:8931: |
| 118 | 51) Cleaning of existing over head tank/ underground water storage tank by mechanical method of specified TANKCLEAN process in stages: (1) Empty the tank/ sump and make it to near dry, (2) wash the tank internal surfaces and top of the tank with fresh water and clean/ rinse the inside surfaces of side walls, ceiling and floor surfaces perfectly by removing all scalling, fungus etc., with rotary jet mechanism, (3) Removing/ cleaning mud, silt, waste, sludge and garbage from the tankwith sludge pump/ vaccum cleaner and disposing outside the building, (4) After drying applt UV radiation with specified equipment in the tank for 15 minutes to kill the harmfull bacteria etc., complete all as per directions of the Engineer-in-charge. |
| 119 | (The rate includes filling of outlets of tank with cotton during cleaning marking of date of painting on the tanks and cleaning of all the dirt/ waste etc., from the terrace and submission of certificate from specialised agency). |
| 120 | 52) Cleaning of exisitng sewer lines, manholes etc. Cost includes all labour for removing the silt, slush, waste etc. and rodding the sewer lines and manholes by mobile sewer rodding equipment/manually from manhole to manhole to clear the blockage, chokages etc for proper functioning of sewer lines( The payment shall be made for removal of blockages in between manhole to manhole as one job with all above operations.) |
| 121 | 53) Charges for arranging carpenter / plumber/Mason along with helper whereever required for attending minor repair works in the compound etc., complete as directed by the Engineer-in-charge. (The required fittings & fixtures exept screws/nails, drilling etc.shall be paid separately and measured for each half day) |
| 122 | 54) Removing glass panes from windows and replacing them with new glass panes with putty and nails wherever necessary : float glass panes of thickness 4mm |
| 123 | 54 a) for windows in ground floor and /or for windows which can be accessed from inside of the room / bolcony with ladder arrangement wherever necssary. |
| 124 | 54 b) for windows in upper floors ( other than ground floor ) up to 8 floors with necessary Jhoola arrangement |
| 125 | 55) Credit for taking away the unusable & unservicablesteel windows including transportation, loading etc., complete. The windows shall be disposed of on as is where is basis. |
| 126 | 56) Credit for taking away the unusable & unservicablePVC / PTMT sanitary fittings such as PVC flush tanks, bib cocks, pillar cocks etc by removing them carefully without causing any damages to the pipelines, other fittings. The fittings shall be taken away on as is where is basis i.e. by removing them. The quoted rate shall include all labour charges for removing and taking them away. All complete and as per directions of the Engineer - in -charge. |
| 127 | 57) Credit for taking away of unserviceable G.I / C.I pipe linescomplete etc., as directed by Engineer-in-charge. a) 15mm to 40mm nominal bore |
