|
| 1 | Dismantling and removing RCC roof slab including stacking the useful materials for reuse and removing the debris within 50m lead |
| 2 | For 1st Floor |
| 3 | Dismantling and removing brick or stone masonry in cement mortar under 3m. Height including stacking the useful materials for reuse and removing the debris within 50m lead |
| 4 | For 1st Floor |
| 5 | Dismantling GCI or AC sheet roofing after carefully removing the bolts and nuts including stacking of materials for re use and removing the debris within 50M lead. |
| 6 | Removing cement plaster from wall including racking joints 12mm deep and removing the debris within 50mt.Lead etc. complete as per direction of Engg-in-Charge . |
| 7 | Brick work with Fly Ash .Bricks having crushing strength 75kg/sq.cm in c.m. 1:6 in Sup.Str. including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 8 | For 1st Floor |
| 9 | For 2nd Floor |
| 10 | R.C.C. work M-20 grade using 20mm.and down grade HBG crusher broken chips including hoisting,laying, cost,conveyance and royality of materials curing including centering and shuttering etc. complete. For 1st Floor |
| 11 | COLUMN AND BEAM |
| 12 | LINTEL |
| 13 | CHHAJJA |
| 14 | STAIRCASE |
| 15 | R.C.C. work M-20 grade using 20mm.and down grade HBG crusher broken chips including hoisting,laying, cost,conveyance and royality of materials curing including centering and shuttering etc. complete. For 2nd Floor |
| 16 | COLUMN AND BEAM |
| 17 | LINTEL |
| 18 | CHHAJJA |
| 19 | Supplying,fitting and placing uncoated HYSD bar reinforcement as per drawing and technical specification including cost,conveyance and all taxes of steel and binding wire etc.complete |
| 20 | 16mm. thick cement plaster in c.m. 1:6 over brick masonry including cost conveyance and royality of materials curing etc. complete |
| 21 | For 1st Floor |
| 22 | For 2nd Floor |
| 23 | 12mm. thick cement plaster in c.m. 1:6 over brick masonry including cost conveyance and royality of materials curing etc. complete |
| 24 | For 1st Floor |
| 25 | For 2nd Floor |
| 26 | 6mm. thick cement plaster (1:4) to R.C.C. surfaces finished smooth including closed deep chipping and slury treatment, cost , conveyance and royality of materials curing etc. complete |
| 27 | For 1st Floor |
| 28 | For 2nd Floor |
| 29 | Fixing Vitrfied tiles in floors,treads or steps and landings on 20 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge |
| 30 | Fixing of ceramic floor tiles in floors,treads or steps and landings on 25 mm thick cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge. |
| 31 | Fixing of Vitrified tiles in dados skirting and risers of steps on 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to match shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge. |
| 32 | Fixing Ceramic wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete |
| 33 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame. shutters and all fitting and fixtures.as panel fitted with rubber bending including locking arrangement and all fittings including cost of materials, taxes labour, T&P complete. data for 1.49 sqm |
| 34 | Supplying . fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.prelaminated board dixed on door frame by means of tapered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc complete. |
| 35 | Providing ,fitting and fixing of decorative flush door made up with 32 mm thick phenol bounded .BWR grade block board and subsiquently finished with 1 mm thick BWR grade decorative laminates of approved shade on both side ,fixed by synthetic adhesive and headless pins with all door accessory etc. complete as per direction of Engineer in charge. |
| 36 | Supplying ,fitting, fixing of factory made single leaf rigid FRP composite door shutter with a frame of 32mm thick,laminated with to GRP skins with wood grain finished fabricated using UV stabilized Isopthalic gal coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with orthopathalic ,polyster resin including fitting of all fixtures like hinges,towerbolt,handle,aldrop etc with cost,conveyance and taxes of all materials and labour etc. complete. |
| 37 | Providing and fixing of fixed Glazing with part top hung of approved make to be fabricated from roll formed sections made of pre-laminated steel (base steel as per IS-513 of 0.6 mm thick \"D\" quality galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl / White/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm.Top hung shutter should be of 46x46 mmm.Accessories/gaskets are to be used as per the manufactures supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM.All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be cut to length, mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxes complete as per direction of Engg-in-Charge. |
| 38 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2m min 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, excluding GST of all materials, labour, T&P etc. required for the complete in all respect. |
| 39 | Providing fitting and fixing at allheight flase ceilng of 12mm thick tapered edge gypsum board including providing and fixing of frame work made of from M.S sheet and galvanised in accordance with zinc coating 600 and consisting of angle cleats of sixe including fixing the gypsum board with ceiling sectional perimeter channels 0.5 mm thick 27mm high having flanges of 20mm and 30mm long. The primete of ceiling fixed to walkl/ partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive all screws 2230 mm interval including joinbting and fixing to a flush ficish of tapered and square edge of the gypsum board with recommended filler,paper tapes ficisher and two coats of primer suitable for gypsum board including the cost of painting.( No deduction have to made forlight opening.) complete in all respect as per directon in charge |
| 40 | Providing fitting fixing of decorative Gypsum cornice in all respect as per direction in charge. |
| 41 | Providing & fixing vertical roller blinds made up wih 100 mm wide woven fabrics coated synthetic matt of approved colour fitted properly at specified space with suitable standard power alluminium top channel etc complete. |
| 42 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials excluding GST, labour T&P etc complete. |
| 43 | Priming one coat to wall surface with water bound cement primer including cost, conveyance,excluding GST of all materials, labour and T&P etc. complete |
| 44 | Ground floor |
| 45 | For 1st Floor |
| 46 | For 2nd Floor |
| 47 | Finishing inside walls with Distemper of approved shade on new work two coats to give an even shade including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 48 | Painting two coats with weather seal coat paint over a coat of primer with water bound cement paint including cost, conveyance, excluding GST of all materials, labour and T&P etc. complete. |
| 49 | Ground floor |
| 50 | For 1st Floor |
| 51 | For 2nd Floor |
| 52 | Wall painting one coat on old work with Weather coat paint of approved shade as per direction of Engg-in-Charge . |
| 53 | Supplying, fitting and fixing of powder coated M.S. collapsible gate/Window grill/Ventilator etc made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction in all floors. |
| 54 | Enamel Painting two coats with enamel paint of approved quality etc. complete as per direction of Engg-in-Charge .Data for 9.30 Sqm.. |
| 55 | Providing,fitting,fixing of conference dias table of size 5.49 mtr x 1 mtr x 0.75 mtr made up BWR ply with glass top & vernear laminate wih melanine finish with draw system. |
| 56 | Laying of 110mm nominal diameter UPVC sewer line including cost of materials. |
| 57 | Supplying, fitting and fixing of 1000 liter capacity water storage tank along with construction of appropriate staging for fixing of the same as per specification and direction of engineer in charge. |
| 58 | Providing & Fixing to walls/floor the following nominal diameter pipe, fittings including cost of pipe, making good the damage, etc. |
| 59 | (a)32mm dia PVC pipe in all floors |
| 60 | (b) 25mm dia PVC pipe in all floors |
| 61 | (c ) 15mm dia PVC pipe in all floors |
| 62 | Supply, fitting and fixing of chromium plated brass towel rail 25mmdiax450mm long complete including cost of all materials |
| 63 | Fixing 600 x 600 mm Bevelled edge mirror of superior glass mounted on wall tile and fixed to PVC plugs with Chromium Plated Brass Screws & Cap all complete as per specification. |
| 64 | Supply, fitting and fixing of C.P. screw down bib cock (TAP) of 15mm diameter in ground floor |
| 65 | Supply, fitting and fixing of CP concealed screw down stop cock of 15mm diameter. |
| 66 | Supply, fitting and fixing of wash hand basin with hole (size 550x400mm)including fixing CP brass waste, fixing of 32mm PVC waste pipe, fixing 15mm dia CP pillar cocks, fixing 12mm dia connection pipe & water connection etc. complete including cost of all materials in ground floor and first floor as per specification and direction of engineer in charge. |
| 67 | Fitting and fixing of Orissa type water closet squatting pan, Size 580x440mm in CC(1:5:10)using 40mm size cbhg metal including cost of materials in ground floor and first floor as per specification and direction of engineer in charge as per specification and direction of engineer in charge. |
| 68 | Supply, fitting and fixing of PVC low level 10lit capacity cistern with complete fixtures, all complete in ground floor and first floor as per specification and direction of engineer in charge. |
| 69 | Supply, fitting and fixing of following components/assesories at proper places, all complete in ground floor and first floor as per specification and direction of engineer in charge. |
| 70 | (a) 110mm PVC SWR coupler |
| 71 | (b) 110mm plain PVC tee |
| 72 | (c ) 110mm pipe clip |
| 73 | (d) 110mm PVC vent cowl |
| 74 | (e) 110 mm dia plain bend |
| 75 | Recssed wiring to light point & Exhaust fan point with 1.5 sqmm FR PVC Insulated single core multistandard copper conductor of ISI marked with 20mm dia non metalic PVC flexible conduit with 5A ,250V modular type switch of ISI marked & ceiling rose of ISI marked mounted on MS BOX having front back light cover of suitable size, MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire including all accessories and connection as per direction of Engineer in charge(make of wire=Finollex/L& T/Anchor/Havels/V-guard/Great white)(deducting the cost of S/F of 100mmx100mmx60mm M.S Box with Backlite cover-1no) Group-A(1.1.1.1-1.24.2) |
| 76 | -do- Group-B(1.1.2 -1.24.2) |
| 77 | -do- Group-C(1.1.3 - 1.24.2) |
| 78 | Ressed wiring to Fan point in Group-B |
| 79 | S/F of 18 SWG following size of modular GI box along with accessories in recess wiring including cutting the wall and making board thesame in case of recess conduit as required(1.24) 2 module. |
| 80 | do.......4Module |
| 81 | do.......8 Module |
| 82 | do.......12 Module |
| 83 | Wiring for circuit/sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked confirming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduct 1.6mm in recessed PVC conduit as required (Make of wire-Finolex/L & T /Anchor/Havels/V-guard) 2x1.5sqmm + 1x1.5sqmm(1.8.1) |
| 84 | do- 2x2.5sqmm +1x1.5sqmm(1.8.2) |
| 85 | do- 2x4 sqmm +1x1.5sqmm(1.8.3) |
| 86 | Supply Installation testing and commissioning of 32A ICDP Main Switchs(IS 13940 part 3/1993) of following capacity on existing surface/wall mounting & complete with H.R.C fuse links inter connections earthig etc as required as per direction of Engineer Incharge (Make-seimens/HPL/Anchor/L & T Havels/C & S/R.K) |
| 87 | S/F of \"B\" series SP MCB of 6amp rating 240volt B series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection testing and commissioning etc as required single pole(SP)(2.6.1) |
| 88 | Supply fixing of single pole MCB with sheet steel enclosure ,distribution board ,on surface /recess,complete with tinned copper bus bar ,neutral bus bar ,earth bar ,din bar ,detachable gland plate,interconnection,phosphate and powder painted including earthing etc.as required (but with MCB /RCCB/ISOLATOR) etc as required as per direction of Engineer in charge ( 12 way double door) |
| 89 | S/F of batten holder BK angle holder ISI marked including connection etc instead of celling rose(1.29-1.28) |
| 90 | S/F of Cu. Earth Plate Earthing 600mmx 600mm x 3.15 Without Salt & Charcol (3.5) |
| 91 | S/F of 8 SWG Copperwire for loop earthing(3.18) |
| 92 | S/f of salt & charcoal for Plate Earth electrode(3.6) |
| 93 | Supply & fixing of 48\"\" A.C ceiling fan without reguletor incuging numbering of reputed mark incluging all connection(Make:-Usha-Striker Millenium/Crompton -jura/ Havells-Velopcity/Spark/Anchor-XL/ Orient -Summer Pride/Polycab -Vital) |
| 94 | S/F of electric step ceiling fan regulater in existing switch box including connetion with 1.5 sqmm FR pvc insulated single core multistrand copper conductor earthing the regulator as required(1.38) |
| 95 | S/ F of 18-25 LED single strip type tube light fitting ( make-Havells/Philips/ Crompton / Polycab/PAC/ HPL) |
| 96 | S/F of 10Watt LED Bulb ( Make -Crompton/ Havells/ HPL /Philips/Polycab) |
| 97 | Installation,testing and commissioning 18 w LED Light etc directly in ceiling / wall,including connection with 1.5 sqmm FR PVC insulated copper conductor and earthing as required as per direction of engineer in charge.( make of wire Finolex/ L & T /Anchor/Havels/V Guard. |
| 98 | Installation,testing and commissioning 100 w LED Street Light etc. complete.( Make -Crompton/ Havells/ HPL /Philips/Polycab) Please Enable Macros to View BoQ information |
