|
| 1 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa of 150 gsm as in roof covering/cladding to walland rain water gutter fixed with self tapping screws including dismantling plain or corrugated Asbestos cement (Corrugated, semi corrugated etc) sheet complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpaof 150 gsm as in roof covering/cladding to wall , fixed with self tapping screws including dismantling plain or corrugated Asbestos cement (Corrugated, semicorrugated etc) sheets in roof coveringcomplete all as specified and directed. |
| 3 | Dismantling of framed work timber scantling 40 sqcm and over in section and in any position complete all as specified and directed. |
| 4 | M&Lsteel work in tubular trusses/column, railing, grills etc incl special shaped washer etc complete using ERW or induction butt welded tube complete all as specified and directed confirming to IS 1161:1979 grade 240 |
| 5 | Material & labour for non skid ceramic coloured tiles 7mm to 8mm thick area of each tile exc0.18 sqm but n exc 0.38 Sqmcoloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement in 15 mm thick screed bed in CM 1:6 for floor tiles complete including dismantling of floor tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified and directed by the Engr-in-Charge. |
| 6 | M&L for glazed ceremic coloured tiled in vertical surfaces 300x600x7 mm thick(as approved by Engr-in-Charge) set and jointed in neat cement slurry and pointed in white or colour cement in 10 mm thick rendering in CM 1:4 for wall tiles to match including dismantling of wall tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified. |
| 7 | Material & labour for non skid ceramic coloured tiles 7mm to 8mm thick area of each tile exc0.11 sqm but n exc 0.18 Sqmcoloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement in 15 mm thick screed bed in CM 1:6 for floor tiles complete including dismantling of floor tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified and directed by the Engr-in-Charge. |
| 8 | M&L for Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished including 15 thick screed bed in CM 1:6 for laying of floor finishes of tiles area of each tilesexceeding 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including dismantling of floor tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified as directed. |
| 9 | M&L for Providing 25 mm thick, cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate in flooring complete all as specified and directed by Engineer-in-Charge |
| 10 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar |
| 11 | M&L for machine cut kota stone slab flooring 15 - 18 mm thick over 15 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 12 | M&L for 15 -18mm machine cut kota stone slab in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM 1:4 & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified and directed. |
| 13 | M&L for rendering 15mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) finishing the surfaceevenand fair without using extra cement including taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc.Note Plastering shall be done with coarse sand only |
| 14 | M&L 10mm thick rendering on fair faces of brick work or concrete surface in CM 1:6 as in internal walls to be finished even and smooth without using extra cement including taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc. Note Plastering shall be done with coarse sand only |
| 15 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified. |
| 16 | Taking down shutter exc 1 Sqm n exc 2.00 Sqm each |
| 17 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each all as specified. |
| 18 | S&f 30 mm thick factorymade solid WPC(Wood plastic composite) moulded gauged door shutter comprimising of virgin polymer of K values 58-60 (suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawl strength of 1800N (Face) & 900 N (edge)minimum compressive strength of 50 N/mm2 and resistance to spread of flame of class A Category with property of being termite/borer proof,water/moisture proof and fire retardant.WPC to be laminated with PVC Foil of minimum 14 microns thick of approved design plasted with hot melt adhesive on both faces of shutter with wiremesh in any no of division min 4 no pannels with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixedwith 15X15 square wpc beading in side rails with screwing 8X28 heat metal zinc coated screws can be remove or fix again after changing of wire mesh when be remove or fix again after changing of wire mesh when needed complete all as specified |
| 19 | S & F for 30 mm thick Flush shutter solid core construction with block board core moulded design with sunmica sheets on both side and edgeshydraulic hot preseed with adhesive complete all as specified |
| 20 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 21 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 22 | S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality one side decorative lamination and other side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed . |
| 23 | S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality both side plainwhite color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed . |
| 24 | Supply only 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed |
| 25 | S&F auto closing hydraulic (soft closing) chrome finish stainless steel hinge openable at 110 degree all as specified and directed. |
| 26 | S&F magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed |
| 27 | S&F in repairs Drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, width of flap 30mm fixed in repair, complete all as specified for modular kitchen. |
| 28 | S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grmscomplete all as specified. |
| 29 | Providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre(wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grmscomplete all as specified. |
| 30 | S&F powder coated anodised aluminiumwindow/ventilator shutter sliding type with styles, rails size 40mm x 20mm, frame for chowkat size 30mm x 90mm, fixed glazing, all are made from aluminium anodised section including necessary jointing cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size with and including 4mm thick frosted glass /tinned glass etc complete as specified. Note:-(i)Three Nos of track to be provided.(ii) In three tracks, shutter with frosted glass / tinned glass, wire gauge 0.56mm dia.(iii)Thickness of aluminium section shall not be less than 1.00 mm) |
| 31 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Windowprofile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drillingof holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steelFrame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed tothe wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. N exc 2.00 Sqm Each |
| 32 | M&L for applying two coats of exterior emulsion paint over roof sheet incl complete removal of existing surface complete all as specified and directed. |
| 33 | S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring. |
| 34 | S&F 100mm long stainless steel hinge pin complete all as specified as directed by Engineer-in-Charge |
| 35 | Supply in repair steel tower bolts 200 mm complete all as specified as directed by Engineer-in-Charge. |
| 36 | Supply 125 mm long steel handles complete all as specified as directed by Engineer-in-Charge. |
| 37 | Supply steel sliding door bolt 250mm long with hasp, staple (bolt type) and fixing with four numbers nut and bolts complete all as specified as directed by Engineer-in-Charge. |
| 38 | M&L for preparation of new wood surface and applying two coat of synthetic enamel paint over a coat of pink primer on wood/plywood based surface of over 10cm width or girth. |
| 39 | Cleaning and removing all scale and dirt etc from tanks exc 250 ltr and n.exc 500 ltr capacity and from mouths of circulating pipe date of cleaning to mentioned completed all as specified. |
| 40 | S & F in repair stainless steel kitchen sink with drainage board of over all size 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm, 1 mm thick with plug washers and wastes ;including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe. |
| 41 | S&F 1 mm thick stainless steel kitchen plate rack 750 x 900 mm of fixed in repair all as specified and as directed.Make-Blue star |
| 42 | S&F in repair chromium plated shower roses with or without swivel joints, size 125 mm dia incl fixing to steel pipe or unioncomplete all as specified and directed by Engr-in-charge. |
| 43 | S&F in repair 15 mm bore dia bib cock fancy type chromium platedcast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-charge.Make Jaquar-Essco,kohler,Grohe or eqn as approved by AGE(I) |
| 44 | S & F in repairBottle trap for WHB of brass chromium platedhaving minimum water seal of 25mm complete as approved by GE/AGE. |
| 45 | M & L for fixed in repairs existing towall mixer 3 in 1and center hole basin mixture like as Leg, extension nipple etc complete all as specified and directed. |
| 46 | S&F in repair 15 mm bore brass CP wall mixerwith provision of overhead shower with 115 mm long bend pipe on upper side, connecting legsand wall flanges for iron pipe and fixed complete all as specified and directed..Make Jaquar-Essco,kohler,Grohe or eqn as approved by AGE(I) |
| 47 | S&F in repair 15 mm bore dia Angle valve/ stop valves with wall flange cast copper alloy fancy type cromium plated screwed down both ends for iron pipe complete all as specified and directed by Engr-in-charge.Make Jaquar-Essco,kohler,Grohe or eqn as approved by AGE(I) |
| 48 | S&F in repair 32mm bore PVC waste pipe for WHB, complete all as specified and directed by Engr-in-charge. |
| 49 | S & fixed in repairPVC low level flushing cistern 10 Ltr capacity syphonic action type , white with inlet ball valve float and handle including brackets complete and including PVC flush pipe 32mm dia low or high density for low level cistern complete all as specified and directed by Engr-in-charge.Make Cera,Hindware or eqn as approved by AGE(I) |
| 50 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm |
| 51 | S & F stainless steeltowel ring square complete all as specified |
| 52 | S&F in repair looking mirror 5 to 6 mm thick fixed on 8mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and hook (shade as approved by Engineer-in-Charge complete all as specified and directed. |
| 53 | S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.Make Hindware,Parryware Cera or eqn as approved by AGE(I) |
| 54 | S&F in repair Vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.Make Cera,Parryware or eqn as approved by AGE(I) |
| 55 | S&F in repair vitreous china squatting pan, Orissa pattern size 580mm x 440mm with integral foot rest including connection to trap and to flush pipe, anti-syphonage pipe etc completeall as specified and directed.Make Cera,Parryware or eqn as approved by AGE(I) |
| 56 | Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed and S & F water tubing 15 mm bore, medium weight, ISImarked galvanized with all fittings and fixed to walls,ceiling or laid in floors complete all as specified anddirected. |
| 57 | All as per srl item No. 56 above but 20 mm bore |
| 58 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) and S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors |
| 59 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) and S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors |
| 60 | S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement |
| 61 | Demolition of Brickwork/Stone masonary built in cement mortar including all quoins,arches,pillars etc but excluding ashlar facings,dressed stonework and precast concrete articles |
| 62 | M&L forBrickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 |
| 63 | S&F 3.0 mm thick plain acrylic sheetin square n exc 0.5 sqm each pane with rivet/nut boltup to three storey height complete all as specified and directed by Engr-in-charge and hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and |
| 64 | M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of not less than 01 mm thick wall care puttyand including a coat of exterior wall primer complete all as specified and directed. |
| 65 | S&F stainless steel curtain rod of 20 mm dia with fixing brackets,incl sidebrackets, finals complete all as specified. |
| 66 | M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer incl 2mm thick wall care putty complete all as specified and directed. |
| 67 | M&L for complete removal of existing treatment and applying two coat of oil bound distemper on walls over a coat of primer and 2 mm thick wall care putty complete all as specified and directed. |
| 68 | M&L preparation of old painted wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and paintingone coat with synthetic enamel including cleaning, stopping and rubbing down and removingalldropings etc. |
| 69 | Supply and fix 500 liters capacity, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed. |
| 70 | Supply and fix 1000 litres capacity, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in positionincluding all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed. |
| 71 | S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed. |
| 72 | M&L for removing/cutting trees vegetation, digging out roots from concrete or brick wall filling holes on building wall/roof/chajja/water tanks tagging area etc and making good with cement mortar 1:4 complete all as specified and directed. |
| 73 | M&L for 15-18 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. includingrounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified |
| 74 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete. |
| 75 | M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling |
| 76 | M&L for preparation of old/new surfaces of ceiling and applying two coats of white washcomplete all as specified |
| 77 | S&F in repair 110mm PVC (SWR) bends any radius |
| 78 | S&F in repair 75mm PVC (SWR) bends any radius |
| 79 | Supply and fixing in repair LED lights batten fitting 4 Feet 18/20W, 220V, AC batten type with driver, holder including LED tube rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make:- Philips/Havells/Bajaj |
| 80 | Supply and fixing in repair LED lights batten fitting 2 ft 9/10W, 220V, AC batten type with driver, holder including LED tube rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make:- Philips/Havells/Bajaj |
| 81 | Supply and fixing in repair LED luminaire square shape 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completeincluding taking down old unserviceable fitting complete all as specified and as directed.Make:- C&S Model- Panel 595x595, Cat No- LTCRSLM36WATT2X2 or equivalent |
| 82 | Supply and fixing in repair LED luminaire square shape 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completeincluding taking down old unserviceable fitting complete all as specified and as directed.Make:- Havells Model- Octane Plus, LED 2X2 panel square shape or equivalent |
| 83 | Supply and fixing in repair LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including suitable bracket and fixing arrangement complete all as specified and as directed.Make:- Havells/Philips/Crompton |
| 84 | Supply and fixing in repair amp rating 240V, 10KA \"C\" curve miniature circuit breaker MCB of SPN 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.Make:- Legrand, ABB, Havells, C&S |
| 85 | Supply and fixing amp in repair rating 240V, 10KA \"C\" curve miniature circuit breaker MCB SP 10A to 25A and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make:- Legrand, ABB, Havells, C&S |
| 86 | Supply and fixing in repair amp rating 240V, 10KA \"C\" curve miniature circuit breaker MCB of SPN 32-40 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.Make:- Legrand, ABB, Havells, C&S |
| 87 | Supply and fixing in repair 415V 10KA \"C\" curve miniature circuit breaker MCB of TPN 63-100 AMP in the DB complete with connection testing and commissioning all as specified and directed by Engr-in-Charge. Make:- Legrand, ABB, Havells, C&S |
| 88 | Supply and fixing in repair stepped type electronic fan regulator penta flush type on the existing phenolic laminated sheet etc as complete all as specified and as directed by Engr-in-ChargeMake:- Anchor/Havells/GM |
| 89 | Supply only PVC insulation tape is ideal for low voltage applications such as insulation, sealing, joiniting, fixing and to facilititate colour-coding for safety and identification purpose complete all as specified and as directed.Make:- Taparia/Steelgrip/Pidilite |
| 90 | Supply only white 1.5mm x 2 core twin flat copper wire with triple layer PVC Insulation for electrical connection of light fittings and fixtures including fixing arrangements on laid on walls with clips and clamps complete all as specified and as directed.Make:- Havells/Polycab/Plaza |
| 91 | S&Fin repair/replacement TPN DB suitable for MCB TPNincomer, double door (IP-54), 4 Ways, built- in 200 Ampsbusbar for neutral linkcomplete suitable for 415 Volts, AC, 50 Hz complete all as specified and as directed.Make:- Schneider/Legrand/L&T |
| 92 | S&Fin repair/replacement TPN DB with suitable for TPN MCBincomer, double door (IP-54), 8 Ways, built- in 200 Ampsbusbar for neutral linkcomplete suitable for 415 Volts, AC, 50 Hz complete all as specified and as directed.Make:- Schneider/Legrand/L&T |
| 93 | Supply and fixing repair/replacement sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated SPN 8 way 240 Volts AC complete all as specified and as directed. Make:- Schneider/Legrand/L&T |
| 94 | Supply and fixing repair/replacement sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated SPN 12 way 240 Volts AC complete all as specified and as directed. Make:- Schneider/Legrand/L&T |
| 95 | Supply and fix in repair switch piano flush button, single pole, 5/6amps, one way all as specified and as directed by Engr-in-ChargeMake:- Anchor/Havells/Legrand |
| 96 | Supply and fix in repair/replacement switch piano flush button, single pole, 5/6amps, two way complete all as specified and as directed by Engr-in-ChargeMake:- Anchor/Havells/Legrand |
| 97 | Supply and fix in repair socket outlet 3 pin 5A flush type complete all as specified and as directed by Engr-in-ChargeMake:- Anchor/Havells/Legrand |
| 98 | Supply and fix in repair switch piano flush button, single pole, 15A, one way all as specified and as directed.Make:- Anchor/Havells/Legrand |
| 99 | Supply and fix switch in repair socket combination 2 – in – one, 6A flush type compete all as specified and as directed. Make:- Anchor/Havells/Legrand |
| 100 | Supply and fixing repair switch socket combination 2 – in – one 16A flush type universal complete all as specified and as directed.Make:- Anchor/Havells/Legrand |
| 101 | Supply & Fixing repairs ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.Make:- Anchor/Havells/Cona |
| 102 | Supply & fixing Bell repairs push flush type, 5 Amps button all as specified and as directed by Engr-in-ChargeMake:- Anchor/Havells/Legrand |
| 103 | Supply & Fixing Bell, repairs AC 230 Volts single pole including mounting block all as specified and as directed Engr-in-ChargeMake:- Havells/Orpat/Orient |
| 104 | M&L in repair in repair/replacment submain wiring including taking down with two single core PVCinsulated FRLS-H multistrand copper conductor cable of size 04 Sq mmdrawn through casing caping of suitable size size ISI markedwith allfittings / accessories and one 2.5 Sq mm FRLS-H multistrand copper conductorcable as continuous earth wire connected to earth dolly including colour coding of copper conductor ie for Phase-Red/Yellow/Blue, Neutral-Black and Earth wire-Green colour complete all as specified and as directed by Engr-in-Charge.Make:- Polycab/Plaza/HavellsNote :- (i) Two run of single core cable and one run of earth wire will be measured as one length(ii) All copper conductor shall be connected to MCBs/Switches etc with copper lugs/Thimble |
| 105 | M&L in repair for point wiring concelaed with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLSH cable 1100 volts grade (conforming to IS) drawn through rigidnonmetallic conduit not less than 20mm size, medium grade with all necessary fittings, concealed wiring , for one light/fan/socket/bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC rectangular block with 3 mm thick plastic laminated sheet cover of suitable size for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminatedbakelite sheet cover ,for housing switches, socket outlet, regulator etc. andcolour coding of copper conductor ie for Phase-Red/Yellow/Blue, Neutral-Black and Earth wire-Green colour complete all as specified and directed by Engr-in-Charge.Make:- Polycab/Plaza/Havells |
| 106 | All as above item ser No 105 but with PVC casing n caping complete all as specified and as directed by Engr-in-Charge.Make:- Polycab/Plaza/Havells |
| 107 | All as per item No 105 here-in-above but for one light point controlled by two nos of 2 way switches complete all as specified and as directed by Engr-in-Charge.Make:- Polycab/Plaza/Havells |
| 108 | All as per item No 105 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 2.5 Sqmm size complete all as specified and directed by Engineer-in-Charge.Make:- Polycab/Plaza/Havells |
| 109 | All as peritem No 105 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board with cables 2.5 Sqmm size complete all as specified and directed by Engineer-in-Charge.Make:- Polycab/Plaza/Havells |
| 110 | All as per item No 105 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 4.0Sqmm multi stranded and 2.5 Sq mm stranded for earth wire PVC insulated un-sheathed copper cable.Make:- Polycab/Plaza/Havells |
| 111 | Supply and fixing in repair modular socket type electronic fan regulator type on the existing phenolic laminated sheet etc as complete all as specified and as directed by Engr-in-ChargeMake:- Anchor/Modular/GM |
| 112 | Supply only non-metallic PVC casing n caping of size 20mm connected with boxes junction/ terminal but inclusive of all tees, bends, elbows, reducers, fixing accessories such as couplers, lock nuts, saddles, complete all as specified and and directed.Make:- Pressfit/Jindal/AKG |
| 113 | Supply only non-metallic PVC casing n caping of size 25mm connected with boxes junction/ terminal but inclusive of all tees, bends, elbows, reducers, fixing accessories such as couplers, lock nuts, saddles, complete all as specified and and directed.Make:- Pressfit/Jindal/AKG |
| 114 | Supply only LED bulb 9 watt cool white 240V AC 50 Hz complete all as specified and as directed.Make:- Philips/Havells/Bajaj |
| 115 | Supply only LED bulb 12 watt cool white 240V AC 50 Hz complete all as specified and as directed.Make:- Philips/Havells/Bajaj |
| 116 | Supply only batten holder PVC complete all as specified and as directed.Make:- Anchor/Philips/GM |
| 117 | Supply only pendent holder PVC complete all as specified and as directed.Make:- Anchor/Philips/GM |
| 118 | Supply only condenser 2.5 Mfd suitable for ceiling fan 1200/1400 mm sweep with clip complete all as specified and as directedMake:- TDK/Bajaj/Havells |
| 119 | Supplying and fixing in repair 1100 volts grade heavy duty cable 10 sqmm PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire with two single core cables complete all as specified and as directed.Make:- Polycab/V-guard/Plaza |
| 120 | Supply only in repair DWC flexible conduit pipe 40mm dia black/grey in color complete all as specified and as directed.Make:- Astral/Jindal/Supreme |
| 121 | M&L labour for earthing completewith galvanizedsteelearthplateelectrode600 x 600 x 6 mmburieddirectlyinground( earthpitnotlessthan2.25 mdeepbellowgroundlevel )withtopedgeoftheplatenotlessthan1.5 m bellownormalgroundlevel, connectedtogalvanizedearthlead wire 4 mmdia.bymeansof galvanizedironorsteelbolts , nuts , check nuts andwashers, andconnectedto equipmentsasdirected,includingfunnelwithGI med grade wateringpipe20 mmbore , wiremesh ,charcoalorcokeandcommonsaltinalternatelayersof15 cmcompactedthicknessallaroundtheearthelectrode ,withconcretepitinPCC1 :3:6type C-1 , 50 mmthickprecastRCC1 : 2 : 4typeB-1 coverslabreinforcedwith8 mmdiadeformedbar15 cm C/Candsuitablehandleof 10 mmdia roundbar,GI medium grade pipe for earth lead protectionincludingnecessaryexcavationearthworkinsoft/loosesoilanddisposalofspoiltoadistancen.exc.50 mandnecessarytestingcompleteallasshownonelectricalplateNo. 5ofMESSSRPart-I and as directed. |
