|
| 1 | Deployment of Plumber for day to day maintenance works related with plumbing works in General Shift as per instruction of Engineer-in-charge. |
| 2 | Deployment of carpenter and in general shift for day to day maintenance work related to carpentary work like repairing of door, window, fixing of door and window fittings as and when required as per instruction of EIC. |
| 3 | Deployment of unskilled mapower for day to day maintenance works and helping jobs for plumber and carpenter and any other jobs as per instruction of Engineer-in-charge. in general shift |
| 4 | Deployment of sweeper for day to day sanitary maintenance works jobs as per instruction of Engineer-in-charge. in general shift |
| 5 | Collection and disposal of garbage and other refuses from different locations in the colony area, road side flanks etc. including loading, unloading and disposing the same to any distance as per instruction of EIC. |
| 6 | Cleaning rubbish, sludge, weeds scaum, liquid earth, mud etc from roadside open/covered masonary drain/hume pipe drain/culvert etc by mathor labour & removing the sludge by using pans, buckets including all labours & tools, including loading, unloading and disposing the same to any distance as per instruction of EIC. |
| 7 | Cleaning and desilting of septic tank including removal and refixing of cover slab, removal and disposal of the sludge with all lead as per instruction of EIC including hire charge & running cost of machinaries, labour etc all complete. |
| 8 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m - All kinds of soil. |
| 9 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep anddisposal of rubbish, lead upto50 m and lift upto 1.5 m |
| 10 | Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 11 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 12 | P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 13 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 14 | 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with Net Cement Punning |
| 15 | P/F up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering complete.- 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform |
| 19 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars |
| 20 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar |
| 21 | Brick work with common burnt clay F.P.S. bricks of class designation 7.5 in foundation and plinth in- Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 22 | Brick work with common burnt clay F.P.S. bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 23 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 |
| 24 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level- Cement mortar 1:4 (1 cement :4 coarse sand) |
| 25 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 26 | P/ F kiln season wood woorks door window frames |
| 27 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm |
| 28 | P/F M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete : Fixed to steel windows by welding |
| 29 | P/F factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge : Extruded section profile size 42x50 mm |
| 30 | P/F to existing door frames- 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm wall thickness. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x24 mm and 2 mm wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. \"U\" cleats.The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer\"s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 31 | Providing & fixing panelled shutters for doors, 35mm thick second class teak wood |
| 32 | Providing & fixing panelled shutters for windows, 30mm thick second class teak wood |
| 33 | Supplying, fitting & fixing MS Sheet door & windows with mild steel angles, flats and MS Sheet, all complete |
| 34 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm |
| 35 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 75x47x1.70 mm |
| 36 | P/F ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16mm |
| 37 | P/F ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 100x10 mm |
| 38 | P/F ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete: 100 mm size |
| 39 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm |
| 40 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 41 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 42 | P/F fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete- Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 43 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 44 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 45 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes : 110 mm diameter |
| 46 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Bend 87.5° - 110 mm bend |
| 47 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 48 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 49 | 12mm thick cement plaster of mix 1:6 (1 cement: 6 fine sand) |
| 50 | 6mm thick cement plaster in ceiling 1:3 (1 cement : 3 fine sand) |
| 51 | Neat Cement Punning |
| 52 | Removing dry oil bound distemper, water proofing cement paint and scrapping sand papering and preparing surface smooth, complete |
| 53 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) |
| 54 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 55 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 56 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 57 | Finishing walls with Acrylic Smooth exterior paint of required shade- New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 58 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) |
| 59 | Applying priming coat- With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 60 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 62 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Area less than 0.50 sqm |
| 63 | P/F wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap |
| 64 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 470x420 mm bowl depth 178 mm |
| 65 | P/F white vitreous china water closet squatting pan -Orissa pattern W.C. pan of size 580x440 mm |
| 66 | P/F white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 67 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 68 | Supplying and stacking at site : Moorum |
| 69 | Supplying PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, 15mm dia |
| 70 | Supplying PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, 20mm dia |
| 71 | Supplying PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, 25mm dia |
| 72 | Supplying PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, 40mm dia |
| 73 | Supplying PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, 50mm dia |
| 74 | Supplying PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, 80mm dia |
| 75 | Supplying PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, 100mm dia |
| 76 | Supplying PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, 150mm dia |
| 77 | Supplying PVC Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 15mm dia |
| 78 | Supplying PVC Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 20mm dia |
| 79 | Supplying PVC Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 25mm dia |
| 80 | Supplying PVC Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 40mm dia |
| 81 | Supplying PVC Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 50mm dia |
| 82 | Supplying PVC Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 80mm dia |
| 83 | Supplying PVC Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 100mm dia |
| 84 | Supplying PVC Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 150mm dia |
| 85 | Supplying PVC Elbow of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 15mm dia |
| 86 | Supplying PVC Elbow of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 20mm dia |
| 87 | Supplying PVC Elbow of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 25mm dia |
| 88 | Supplying PVC Elbow of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 40mm dia |
| 89 | Supplying PVC Elbow of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 50mm dia |
| 90 | Supplying PVC Elbow of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 80mm dia |
| 91 | Supplying PVC Elbow of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 100mm dia |
| 92 | Supplying PVC Elbow of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 150mm dia |
| 93 | Supplying PVC Equal Tee of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 15mm dia |
| 94 | Supplying PVC Equal Tee of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 20mm dia |
| 95 | Supplying PVC Equal Tee of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 25mm dia |
| 96 | Supplying PVC Equal Tee of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 40mm dia |
| 97 | Supplying PVC Equal Tee of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 50mm dia |
| 98 | Supplying PVC Equal Tee of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 80mm dia |
| 99 | Supplying PVC Equal Tee of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 100mm dia |
| 100 | Supplying PVC Equal Tee of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 150mm dia |
| 101 | Supplying PVC Reducing Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 20x15 |
| 102 | Supplying PVC Reducing Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 25 x 20 |
| 103 | Supplying PVC Reducing Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 50 x 40 |
| 104 | Supplying PVC Reducing Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 50 x 25 |
| 105 | Supplying PVC Reducing Socket of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785, 80 x 50 |
| 106 | Supply of PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms as per instruction of EIC. |
| 107 | Supply of Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings as per instruction of EIC. |
| 108 | Supply of White plastic seat (solid) with lid C.P. brass hinges and rubber buffers of approved make and quality as per instruction of EIC. |
| 109 | Supply of Flushing Cistern P.V .C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) of approved quality and make as per instruction of EIC. |
| 110 | Supply of hand shower (health faucet) with pvc tube, prayag or similar as per instruction of EIC. |
| 111 | Supply of Shower rose C.P.brass of approved quality for 15 to 20 mm inlet 100 mm dia as per instruction of EIC. |
| 112 | Supply of 20 mm dia Gunmetal gate valve with wheel as per instruction of EIC. |
| 113 | Supply of Brass full way valve with C.I. wheel (screwed end) 25 mm dia as per instruction of EIC. |
| 114 | Supply of PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms as per instruction of EIC. |
| 115 | Supply of PTMT pillar cock of approved quality and colour. 15 mm nominal bore as per instruction of EIC. |
| 116 | Supply of PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 15 mm nominal bore, 152mm long, weighing not less than 440 gms as per instruction of EIC. |
| 117 | Supply of PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440 gms as per instruction of EIC. |
| 118 | Supply of brass C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc as per approved quality: 100 mm dia as per instruction of EIC.CLASS II |
| 119 | Supply of brass C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc as per approved quality: 150 mm dia as per instruction of EIC.CLASS II |
| 120 | Supply of CPVC / PVC: Solvent Cement as per instruction of EIC. 250 ml Pack |
| 121 | Supply of Bleaching powder of approved quality as per instruction of EIC. |
| 122 | Supply of Phnyle of approved brand in bottle as per instruction of EIC. |
| 123 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core |
| 124 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 125 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. |
| 126 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch. |
| 127 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amp switch |
| 128 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket outlet |
| 129 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 amp socket outlet |
| 130 | Supplying and fixing PVC battern angle holder including connection etc. as required |
| 131 | Supplying and fixing Exhaust fan,single phase of reputed make complete as required. |
| 132 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker (Single pole) |
| 133 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker (Single pole & Neutral) |
| 134 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
