|
| 1 | Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet, wall lining,etc complete all as specified and as directed. |
| 2 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding mild steel frame work using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engr-in-charge. |
| 3 | M&L for perforated particle board/tiles 12mm thick for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or withstaples on snap grid complete all as specified and as directed by Engr-in-charge. |
| 4 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing .(Note : Colour & Pattern as approved by Engr-in-Charge) |
| 5 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 6 | S&F 12mm thick WPC Louvers incl WPC corner profile 20/25mm wide and 2mm thick fixed with SS fastner 0.5mm thick clip in any colour and design at Wall and Celling as specifed and directed. Necessary opening / groove to be provided for profile lighting complete all as specified and as directed.. (Note : Colour & Pattern as approved by GE). |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises |
| 8 | M&L for Vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirtingetc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as speciefied and directed. |
| 9 | Taking down cement plaster on brick or stone or concrete surfaces of walls/ceilings etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed. |
| 10 | M&L for rendering 5 mm thick in CM (1:3) on concrete ceiling surface etc complete all as specified and as directed |
| 11 | M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 12 | M&L for preparing new plastered surface of walls/ceilings and applying two coats of oil bound distemper over one coat of white wash complete all as specified and as directed |
| 13 | Excavating in post holes (or similar holes) in each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance not exceeding 100 mtr making goodin soft/ loose soil complete all as specified and as directed. |
| 14 | M & L for PCC 1:3:6type C1 (using 20 mm graded stone aggregate as in sub base, post holes & mass concrete finish even and roughcomplete all as specified and directed.. |
| 15 | Material& Labour for providing and fixing stainless steel (Grade 304) frame made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size with suitable arrangement complete all as spd and as directed by Engr-in-Charge. |
| 16 | Supply and fixRATROradium sheet / tape on stainless steel frame (size of board / samples of letter / pictures / writing will be provided by Engineer-in-charge and of best quality as approved by GE complete all as specified and as directed. Note : Stainless Steel sheet will be measured and paid seprately under appropriate items. |
| 17 | S&F 2/3 mm thick Aluminium Composite pannel sheet best quality complete all as spd and as directed. |
| 18 | S&F 4mm thcik ACRYLIC sheet board of High qualitywith Media printing 3m quality fitting with stainless steel studs or staniless steel frame(size of board / samples of letter / pictures / writing will be provided by Engineer-in-charge) complete all as specified and directed. Note : Minimum weight of Acrylic Sheet not less than 4.70kg per sqm.Note : stainless steel will be measured and paid seprately under appropriate ittems. |
| 19 | Supply,fabrication and fixing of stainless steel 304 grade letters incl vowels smooth finish as per sample provided ( Hindi/English) on granite wall/steel sheet made out of 1mm thick stainless steel sheet (minimum size not lesss than 40mm thick, 40mm in width and 300mm high) and 10mm dia, 75mm long MS studs weld with back side of letters as per site requirement fix on granite wall/ steel sheet making holes by drilling machine and studs fix with epoxy adhesssive/nut bolts complete all as specified and as directed. |
| 20 | S&F stainless steel 304 logo of size 600x600x40mm made out of 1mm thick SS sheet as per sample provided and directed by Engr-in-Charge fixed on MS sheet/Granite by making holes drilling machine and studs fix with epoxy adhessive/nut bolt complete all as specified and as directed. |
| 21 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 22 | M&L for brick work with sub class \"b\" brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed by Engineer-In-Charge |
| 23 | M&L for cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregates as in surface channels and drains complete all as specified and directed |
| 24 | M&L for providing cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregates) as in foundation filling and mass concrete , post holes, cills, steps; seismic and other similar bands, plinth courses, string courses, ramp, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , on roofs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, etc including necessary formwork complete all as specified and directed by Engineer-in-Charge. |
| 25 | M &L for rendering 15mm thick in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed |
| 26 | S&F 450 mm DWC pipe, laid and jointed complete with collars complete all as specified and directed |
| 27 | M & L Pre -Cast Reinforced Cement Concrete 1:2:4 (20mm grade stone aggregate) in Slabs, Manholes cover Slabs,etc set in cement mortar 1:4 ,complete all as specified and as directed.Note: Reinforcement will be measured and paid seperately under relevant items |
| 28 | M&L TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed |
| 29 | S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and or riveted,or forged into spikes framed ,guard bars, barred iron doors,ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-16 complete all as specified and directed |
| 30 | M&L for preparartion of new surfaces of any description and two coat of synthetic enamelled paint over a coat of red oxide primer of steel surface over 10 cm width or girth complete all as specified |
| 31 | Extra for forming fair finished drain or channel 45 cm or more inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified |
| 32 | M&L for cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as sub base,complete all as specified and directed |
| 33 | M&L for 20 mm thick sand cushioning including watering and consolidations etc complete all as specified and directed. |
| 34 | M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006of 60 mm thick, M- 35 grade to match with grey cement and pigment etc complete all as specified and as directed |
| 35 | M&L for machine presssd pre-cast concrete interlocking coloured paving Block(except tiles)of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006of 60 mm thick, M- 35 grade to match with grey cement and pigment etc complete all as specified and as directed |
| 36 | S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates all as specified. |
| 37 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and fair mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed |
| 38 | M&L for preparation of new plaster surface & apply twocoats of cement based paint over a coat alkali primer resistance and all as directed. |
| 39 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge |
| 40 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars,pedestal, window-cills and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 41 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 42 | Rolling and consolidating formation surface with 8 to 12 tonne power rollerto required gradient and camber etc complete all as specified and as directed |
| 43 | M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roadsetc complete all as specified and directed by Engineer-In-Charge |
| 44 | Hardcore of guage exc 63mm,Broken bricks, spread& leveled in two layers n exc. 15 cm thick, watered & rammed to a true surface |
| 45 | M & L for sand filling under floor or in foundation including watering and consolidation all as specified and directed by engr-in- charge. |
| 46 | M&L for Damp proof course 40mm thick in PCC (1:2:4), type B0 (using 12.5mm graded crushed stone aggregate) with WPC (WPC shall be measured and paid separately) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed |
| 47 | M&L for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam etc complete all as specified and as directed |
| 48 | M&L for formwork to sides of column, post,struts,sactionetc complete all as specified and as directed |
| 49 | M&L for formwork to soffits of suspended slab such as roof slab, floor slabs, landing and similar work not exceeding 200 mm thick (horizontal or slopping ) etc complete all as specified and as directed |
| 50 | M&L for formwork to soffits to edges of concrete flats, teads, breaks in floors, window, cills, concrete railing opening in concrete walls, floors and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide etc complete all as specified and as directed |
| 51 | M&L for providing reinforced cement concrete M-20 design Mix(using 20 mm graded crushed stone aggregates)as in Slabs supported on walls, roof beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed |
| 52 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 53 | M&L for TMT bars 5 mm dia and over, upto and including 10 mm dia as in stirrups,cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed |
| 54 | M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in sub base of flooring etc complete all as specified and as directed |
| 55 | Supply only WPC |
| 56 | M&L for applying evenly 3 coat of elastomeric liquid applied membrane of Home Shield PU roofkoat of Berger or equalvent as approved by Engrineer-In-Charge as in Roof portion where leakage and seepage are noticed including preparing of surface by removing existing treatment complete all as specified and as directed by approved applicater.Note :- Authorised applicater is approved by GE. |
| 57 | M&L for formwork to sides chullah hoods, chajja, trough and similar items including edges etc complete all as specified and as directed |
| 58 | M&L for providing reinforced cement concrete (1:2:4) type B1 (Nominal mix) (using 20 mm graded crushed stone aggregates) as in chajja etc complete all as specified and as directed |
| 59 | M&L for Glazed ceramic ware colouredprinted tiles 300x 450 x 6 to 8 mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to matchthe surface laid over andincluding 12 mm thick rendring in CM 1:4 on any faces of brick work for fixing wall tilesover and including bedding layer of cement mortar . |
| 60 | M&L for Non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 300mmx300 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. |
| 61 | M&L for 25 mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate for floor ,finishingthe surface even & smooth without using extra cement complete all as specified & directed by Engr -in charge. |
| 62 | M&L new plastered or unplastered surfaces of walls/ceiling by applying 3mm thick birla white cement wall care putty to get smooth & levelled surface for applying next treatment complete all as specified and directed by Engineer-in-Charge |
| 63 | M & Lfor 15mm CPVCSDR11 pipe with all plain CPVC SDR 11 fittings and fixed complete to walls concealed band or laid under floors etc complete all as specified and directed by Engineer-in-Charge. |
| 64 | Ditto as above but 20mm pipe complete all as specified and directed by Engineer-in-Charge. |
| 65 | S & F for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and directed by Engineer-in-Charge |
| 66 | S & F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and directed by Engineer-in-Charge |
| 67 | Dittofor 50 mm bore but fixed to walls including necessry GI stack clamps complete all as specified and directed by Engineer-in Charge |
| 68 | S & F cast iron cowls 50 mm complete all as specified and directed by Engineer-in-Charge |
| 69 | S & F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches completeall as specified and directed by Engineer-in-Charge |
| 70 | S&F 75 mm bore outlet cast floor/nahani trap with 100mm size stainless steel gratings including jointing to waste pipe fixed in cement concrete type (B-1) 1:2:4 etc complete all as specified and directed by Engineer-in Charge |
| 71 | S & F 75 mm bore cast iron bends of (any radius), dimnishing pieces or taper (larger bore measured) complete all as specified and directed by Engineer-in-Charge |
| 72 | S&F Vitreous China wash down water closet (EWC) (Pedestal pattern) white as approved includingall accessories like seat cover, CP Health faucet and CP jet complete all as specified and as directed |
| 73 | S&F wash hand basin vitreous china white glazed oval type ,CP waste coupling and waste pipe brackets and cutting on granite top for and pinning in ends of brackets and etc complete in all respect complete all as specified and directed by Engineer-in-Charge. |
| 74 | S & F bib tap chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 75 | Supply and fix in repairs chromiumplated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold complete all as specified and as directed. |
| 76 | S&F Wall Mixer 15mm bore (dia), Chromium Plated, Telephonic type with Flangesand fixing-in-repairs, complete all as specified and as directed. |
| 77 | S & Fstop cosk/angle valve chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 78 | S & F toilet paper holder complete all as specified and directed by Engineer-in-Charge. |
| 79 | S & F Aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge. |
| 80 | S&F PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts and washers etc complete all as specified and directed by Engineer-in-Charge. |
| 81 | S & F chromium plated overhead showercomplete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed. |
| 83 | S & F glass self 600mm long as approved complete all as specified and directed by Engineer-in-Charge. |
| 84 | S & F soap dish holder as approved complete all as specified and directed by Engineer-in-Charge. |
| 85 | S & F towel ring chromium plated as approved complete all as specified and directed by Engineer-in-Charge. |
| 86 | S & F Glass corner self chromium plated fancy type cast copper alloy as approved complete all as specified and directed by Engineer-in-Charge. |
| 87 | S & F pillar tap chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F6 mm plain Mirror bevelled edge of selected quality glass, fixed with steel studs complete all as specified and directed |
| 89 | S&F Vitreous China Urinal of size 375x390x590mm flat back large including partation with CP waste coupling, waste pipe and CP spreader with CP connection pipe complete all as specified |
| 90 | S&F Aluminium anodizedpowder coated Window/VentilatorDouble Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge having size of Shutter, Top/ Bottom/centralRail shall be 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed.NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate. |
| 91 | S&F solid door frame 50mmx95mm made out of 5mm wood grain colour prelam PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-In- Charge. |
| 92 | S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with 2 mm thick wood grain colour prelam Moulded PVC sheet on the front face and 2 mm prelam PVC sheet on back face as per specification and drawing in SSR complete all as specified and directed by Engineer-In- Charge. |
| 93 | S & F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge. |
| 94 | S&F stainless steel 75 mm long butt hinges for PVC door shutters and frames complete all as specified and directed by Engineer-in-Charge. |
| 95 | S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm complete all as specified and directed by Engineer-in-Charge. |
| 96 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 97 | Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soil complete all as specified and directed by Engr-In- Charge. |
| 98 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified & directed by Engr -in charge. |
| 99 | M&L preparing Newly Plastered surfaces of Wallsby brooming down or steel wire brushing and scraping down and repair with putty wherever required and applying Two Coats of Acrylic Weather Coat Exterior Paintwith approved Tint over a coat of Primer(as per Manufacturer\"s instructions), complete all as specified and as directed. |
| 100 | S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, complete all as specified and as directed |
| 101 | S&F 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, any type as per site requirement complete all as specified and as directed |
| 102 | S & F 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed. |
| 103 | Spreading and levelling in well layers not exc 25 cm thick including watering as required etccomplete all as specified and as directed |
| 104 | M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collars Salt glazed stoneware drain pipes 150mm size laid in trenches and jointedcomplete all asspecified and directed byEngineer in charge. |
| 105 | M&L for cement concrete 1:3:6 Type C2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes 150mm bore size after they are laid and tested complete all asspecified and directed byEngineer in charge. |
| 106 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia pipe complete all asspecified and directed. |
| 107 | M&L for exterior grade, coloured glossyfinish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick( as approvedby GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid overincluding 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed |
| 108 | M&Lforpoint wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and including PVC conduit with all fittingsmedium grade ISI Marked and PVCinsulated FRLS copperconductor cable of size 1.5 sq mm as earth wire, connected to common earth dolly suitable formounting modular switches including modular metal flush boxes and modular face plate complete all as specified and as directed by Engr-in-charge, (The works includes cutting of chasis and making good disturbed surfaces and rate deemed to included in quated rate):- |
| 109 | One light/fan pointcontrolled by one switch |
| 110 | One switch socket outlet 3 pin,5 Amp on the independent board |
| 111 | One switch socket outlet 3 pin,5 Amp on same board |
| 112 | All as per item No 1 here-in-before butwith 2 single core PVC insulated FRLS and sheathed copper conductor of size 2.5 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.andwith all connecting accessories with 2.5 Sqmm PVC insulated FRLS copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board.using 2.5 sqmm copper cableincl PVC insulated copeer conductor 1.5 Sqmm as continuedearth wire .(Make of cable :- Finolex/ Polycab/ Havells ) |
| 113 | All as per item No 1 here-in-before butwith 2 single core PVC insulated FRLS and sheathed copper conductor of size 4.0 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting concealed PVC conduit pipe, tee, elbow and bend etc.andwith all connecting accessories with 4.0 Sqmm PVC insulated FRLS copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board. (Make :Finolex/ Polycab/ Havells ) |
| 114 | S&F modular socket outlet 6A, 2/3 pin combined 2 module, complete all as specified and as directed by Engineer-in-Charge. |
| 115 | S&F modular socket outlet 16A, 2/3 pin combined 2 module, complete all as specified and as directed by Engineer-in-Charge. |
| 116 | S&F modular switch 1 way 6 Amps 1 module, complete all as specified and as directed by Engineer-in-Charge. |
| 117 | S&Fmodular switch 1 way 16 Amps 1 module, complete all as specified and as directed by Engineer-in-Charge. |
| 118 | S&F modular bell push switch 1 way 6 Amps 1 module, complete all as specified and as directed by Engineer-in-Charge. |
| 119 | S&F Bell, AC, 230 volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 120 | S&F steptype elctronic fan regulator Modulartype, single phase 220 V , one module type, complete all as specified and as directed by Engineer-in-Charge. |
| 121 | S&F ceiling rose 3 phase/PVC/ polycarbonate isolated body,complete all as specified and as directed by Engineer-in-Charge. |
| 122 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed(Make: Havells/Wipro /Philips) |
| 123 | S & F Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed.(Make: Havells/Wipro /Philips) |
| 124 | S & FLED Building security light 35 watt pressure die cast housing with individuals LEDs & Lens with modular secondary optics and IP65 protection with electronics driver and copper conductor 3 core of 1.5 sqmm from ceiling rose to security light withBracket made out of GI light grade pipe of 32 mm dia 1.5 mtr long bend to an angle of 120 degree with fixing arrangements on wall with impact and corrosion resistant including thermalmanagement in multiple optics complete with IP 65/66 protection complete all specified and dirented. (Make: Havells/Wipro /Philips) |
| 125 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-Charge. |
| 126 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm completeall as specified and directed. Make:- CG/Bajaj/Havells. |
| 127 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 volts. complete all as specified and as directed by Engineer-in-Charge. (Make:Legrand / Schneider/Havells) |
| 128 | S&F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt SPN Make : Legrand /Siemens /Havells |
| 129 | S & FMCBs \"B\" characteristics, Double pole , 240 V, 40 Amp breaking capacity 10 kA , single pole complete all as specified and as directed by Engineer-in-Charge. (Make:Legrand / Schneider/Havells) |
| 130 | S & F MCBs \"B\" characterstic single pole 5 to 30 Amp, 240 voltbreaking capacity 10 kAcomplete all as specified and as directed by Engineer-in-Charge. (Make:Legrand / Schneider/Havells) |
| 131 | M&L for submain wiring 2 single corePVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC concealedconduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 6 Sqmm PVC insulated FRLScopper conductor cable for earth wire fixed with shaddle and connectingto common earth teriminals complete all as specified. (Make of cable :- Finolex/ Polycab/ Havells ) |
| 132 | Earthing complete withand including galvanised steel earth plate electrode 60 cmx 60cm x 6 mm thick surrounded by mixtureof charcoal and salt in alternate layers ,buried directly in ground vertically in a pit of depth not less than 2.25 meter deep below ground level with top as of the plate at a depth of not less than 1.5 mtrs below normal ground level connected to galvanized iron or steel earth lead wire 4.0 mm dia,( NO 8 SWG) by means of bolts ,nuts, check nuts and washers of galvanised iron or steel earth wire protected by galvanised steel pipe 15 mm bore (light grade)and connected to main switch or main control board all as shown in electrical plate No. 3of SSR - 2009(Pt I) & including necessary excavation and earth work. |
| 133 | The rate also include charcoal and salt in alternate layers, 20 mm bore GI pipe (Light grade ) for watering , protection pipe funnel, wire mesh , PCC 1:2:4 type B1 chamber in cement concrete ,50 mm thick precast RCC M-25 ( Normalmix) cover duly reinforced with XPM (weight not less than 3 kg /sqm ) and CI frame etc , and including provision of test point , connecting to test point and testing on completion etc, complete all as specified. NOTE : The unit rate include earthing lead and protection pipe upto 6.5 metre from top of earth plate. |
| 134 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 2mm dia galvanised iron or steel wire complete all as specified. |
| 135 | Supply, laying, jointing and testing ofXLPE insulated, armoured, heavy duty LT cable 1100 Volts gradewith aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 2 core,complete, all as specified and directed. (Excavation and Earth works will considered separately) |
| 136 | Excavation in trenches in hard/tense soil not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out including dressing / trimming sides and leveling/grading and ramming of bottom of excavationcomplete as sepecifiedand directed by Engr-in-Charge. |
| 137 | Returning, filling in including spreading, leveling, watering and well raming excavated soid in layers not exceeding 25 cm thick, filling back in trenches after cables have been laid and tested, poles, stays, struts have been erected and testedcomplete as sepecifiedand directed by Engr-in-Charge. |
| 138 | Removing of surplus soil to a distance n.exc 50 mtr and depositing at a level n.nexc 1.5 mtr above starting point where directedcomplete as sepecifiedand directed by Engr-in-Charge. |
| 139 | M&L for sand cushioning in trenches for protection of LT under ground cable including punning and consolidation complete as sepecifiedand directed by Engr-in-Charge. |
| 140 | Supply and Laying Bricks old size sub class \"B\", of class designation 10, for the protection of cable laid flat dry across the cablecomplete as sepecifiedand directed by Engr-in-Charge.. |
| 141 | M & L fortrenchless boringunder roads/ crossing or fixed to wall/ pole, GI tubing light grade of size upto 150mm bore for protection of UG cables complete all as specified and as directed. |
