Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 2 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 3 | All as per item No.02 above but except burnt bricks. |
| 4 | Taking down cement plaster any description on brick or stone cement concrete surfeaces/walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 5 | M & L 10 mm thick rendering in cement mortar 1:6 on brick work or stone masonry/concrete /RCC surfaces rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. |
| 6 | M&L for 1.5mm thick wall care putty on wall complete all as specified and as directed incl sanding rubbing for smoothness of surfaces. |
| 7 | M&L for rendering 15mm thick in cement mortar 1:4on brick work or stone masonry/concrete /RCC surfaces rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. |
| 8 | M&L for rendering 5mm thick in cement mortor 1 :3 as in ceilingplaster on concrete surfaces,rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. complete all as specified and as directed. |
| 9 | M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. |
| 10 | M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed. |
| 11 | M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distemper over a coat of interior wall primer complete all as specified and directed. |
| 12 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. |
| 13 | M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 600X7 to 8 mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to matchetc complete all as directed and specified. |
| 14 | M&L Vitrified tiles 8- 9 mm thick (square/rectangular) polished, area of each tilesexceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors including screed bed 15mm thick in cement mortar 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 15 | All as per Sl item No 14 above but in skirting over 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed. |
| 16 | M&L for non skidjoint free ceramic tiles (of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.18 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 17 | M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing completeincluding screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed. |
| 18 | All as per item No 17 above,but as in skirtingover 10mm thick backing coat in CM (1:4). |
| 19 | M&L machine cut cudappa stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 20 | M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed. |
| 21 | M&L for Machine cut kota stone slab on steps as inriser/tradein single piece of any size 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed. |
| 22 | M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed by Engineer-in-charge. |
| 23 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 24 | M&L for chequered cement concrete tiles 30cm x30cmx 20mm thick Rubber moulded with grey cementandpigment, over and including 15mm thick screed in cement mortar (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. |
| 25 | M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. |
| 26 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 27 | M&L for 30mm thick PCC (1:2:4) Type B1 with 20mm graded stone aggregate as in levelling course as in floor complete all as specified and as directed. |
| 28 | M&L for cement concrete (1:4:8) type D 2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 29 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and and corner finished even and fair and laid in alternate bays complete all as specified and directed. |
| 30 | Taking down carefully existingunserviceable bitumen felt/ APP membrane including plaster (any number of layers ofanythickness) etc and removing of the rubbish to a distance not exceeding500m from the building and depositing where directed complete all as spd and directed. |
| 31 | M&L for rendering 10 mm thick cementplaster in cement mortar 1:4 on RCC/concreteroof/terrace surfaces mixed with water proofing liquid complete all as specified and as directed. Note: Water Proofing liquid shall be measured and paid separately. |
| 32 | M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions, padding concrete below roof treatment etcslightly rounded or chamfered on edges wherever required includingnecessary form work/moulds etcincluding applying cement slurry on surface area @2.50 Kg/Sqm completeall as specified andas directed . |
| 33 | M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :-i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sqm.ii) Providing and laying3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer\"s.iii)Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturer\"s instructions and as directed . |
| 34 | Demolition of RCC cement concrete (reinforced) in roofs, floors(other than ground floors), beams staircases, landing, chajjas, and similar suspended work. |
| 35 | M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas. |
| 36 | Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete |
| 37 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 38 | All as per item No. 37 above but 6mm to 8mm dia. |
| 39 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed. |
| 40 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed. |
| 41 | S&F for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeMake : ECHON/Sintex/Rajshree/Navaratan Note : Rate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . |
| 42 | S&F for 35mm thickfactory made flush door shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. |
| 43 | S&F 2nd class H.W. glazed & skeletonshutter 35mm thick factory madeopen rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed. |
| 44 | Supply for Pipe Supporting Clamping - Single Pipe of PVC dia 75 mm (3\") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance100 mm (4\"):Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 100 mm (4\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Continuous Slotted \"C\" Channel with ribs to be used of size 250 mm (10\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm.(Contd/...) |
| 45 | Item No 44 Contd/...3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3\") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10\") - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3\")PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make: Shaivi or equivalent as approved by GE. |
| 46 | Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed |
| 47 | M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 48 | M&L for preparation of new untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 49 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be pincl in quoted rate).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/NavaratanRate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . |
| 50 | S&F 30 mm thick moulded Prelaminatedboth side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on front side with wood grain texture on front and plain on back side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) . |
| 51 | M & Lfor fabrication & fixing tohorizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc forModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved qualityincluding paste to all exposed edge byedge Binding Tape to match the colour of boardincluding provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 52 | M & Lfor Fabrication & fixing to front side /all exposed sides ofModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR UV, glossy/maat finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 53 | S&F powder coated sliding window, three trackshutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass of 4mm thick black tinted and stainless steel wire loth 0.36mm nominal dia of wire andaverage width of aperature 1.40mm, size ofside rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37complete all as specified and as directed. |
| 54 | S&F for powder coated aluminium ventilator shutters with frame not less than 0.55Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frostedglass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. |
| 55 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0all as specified and as directed. |
| 56 | S&F stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed. |
| 57 | S&F hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size. |
| 58 | S&F for door/shutter ball catches with 8 mm dia steel ball and brass body and striking plate incl magnetic with striking plate for WPCcabinets, cupboard shutters complete all as specified. |
| 59 | S&F 100mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed. |
| 60 | S&F 140 mm aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and as directed. |
| 61 | S&F 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed. |
| 62 | S&F continuous (piano) hinges, stainlesssteel, bright finishedwith 30 mm flaps handle complete all as specified and as directed. |
| 63 | S&F 150mm size aluminium anodized handle complete all as specified and as directed. |
| 64 | M&L for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 65 | S&F in repair 25 mm dia and 1 to 1.50 mm thick stainless steel curtain rodincluding stainless steel brackets, stops, end knobs/ side globe, wall to wall bracket ect. complete all as specified and directed by Engr-in-charge. |
| 66 | S&F in repair PVC cabinet 450x600mm overall size with looking mirror of selected qality 5mm thick glass mounted over PVC framingcomplete all as specified of Make Prayag/Polytuf/Somany |
| 67 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 68 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 69 | S&F in repairs stainless steel plate rackof size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified. |
| 70 | S&F in repairs glazed earthen ware viterous china wash down water closet (pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etccomplete all as directed. Make somany Cat Part No. SMART EWC P or Equivelent in Cera/Hindware/Parryware. |
| 71 | S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete asfixed complete all as specified. |
| 72 | S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings, 32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed. |
| 73 | S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca |
| 74 | S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part NoFLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca |
| 75 | S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.. |
| 76 | S&Fin repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca |
| 77 | S & F in repair CP, soap dishcomplete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca |
| 78 | S&F in repair fancy type Toilet paper holder, steel chromium plated approximate size 140X140X50mm complete all as specified and as directed. |
| 79 | S&F in repair Overhead Shower 120mm round shape, Single Flow (Face Plate Stainless Steel and ABS body with Chrome Finish) with Rubit Cleaning System including shower arm of size 190mm long flat shape for wall mounted shower with flenge complete all as specified and directed. Make Jaquar Cat Part No. OHS-1663 & SHA483 or equivalent in kohar, grohe and Roca. |
| 80 | S&F sheet glass corner wall mounted shelf assembly consisting of 8mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. |
| 81 | S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. |
| 82 | S&F in repairs 15mm bore CP Sink mixer with regular swinging spout (Wall mounted model) with connecting legs and wall flenge complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5309N or equivalent in kohar, grohe and Roca. |
| 83 | S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12or equivalent in kohlar, grohe and Roca. |
| 84 | S&F in repair 15mm dia brass chromium plated two waybib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR 5041 Nor equivalent in kohlar, grohe and Roca . |
| 85 | S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. |
| 86 | Dismantling/Disconnectingof water tanks (RCC hume Pipe/PVC)including disconnecting all connections etc 1000 ltrs capacity. complete for following capacity of tanks . |
| 87 | Refixing the old rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks. |
| 88 | S&Fnew rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks. |
| 89 | Dismantling/Disconnecting of water tanks (RCC hume Pipe/PVC)including disconnecting all connections exc 250 and n exc 500 ltrs capacity. complete for following capacity of tanks . |
| 90 | S&Fnew rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks |
| 91 | S & F 16mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) |
| 92 | S & F 25mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) |
| 93 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 94 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. |
| 95 | Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. |
| 96 | S&F in repairs 25mm bore CPVC gate valves screwd both ends for CPVC pipescomplete all as specified and directed. |
| 97 | Taking down of PVC Pipes with fittings upto 75mm to 110mm dia/eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc.,complete all as specified and as directed. |
| 98 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall with clamp complete all as specified and as directed. |
| 99 | All as per item No 97 but except pipe complete all as specified and directed. |
| 100 | S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall with clamp complete all as specified and as directed. |
| 101 | All as per item No 99 but except pipe complete all as specified and directed |
| 102 | S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. |
| 103 | S&F PVC (SWR) bend any radius 110mmcomplete all as specified and directed. |
| 104 | S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. |
| 105 | S&F PVC (SWR) bendany radius 75mm complete all as specified and directed. |
| 106 | S&F forn110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 107 | S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 108 | S&F 110 mm PVC (SWR) junction single T equal or unequal complete all asspecified and directed . |
| 109 | S&F 75 mm PVC (SWR) junction single T equal or unequal complete all asspecified and directed . |
| 110 | S&F 75 mm PVC (SWR) vent cowl complete all asspecified and directed . |
| 111 | S&F 100 mm PVC (SWR) vent cowl complete all asspecified and directed . |
| 112 | S&F in repairs 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 113 | Complete removal of existing treatment and applying three coats of white wash on surfaces of ceiling, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed. |
| 114 | Complete removal of existing treatment and applying two coats of white wash on surfaces of walls, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed. |
| 115 | Complete removal of existing treatment and applying two coats of oil emulsion distempering over a coat of interior wall primer over 1.5mm thick wall care putty, including removal of unnecessary nails and filling of holes/cracks by crack filler on surfaces of walls, complete all as specified and directed. |
| 116 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately). |
| 117 | S & F and Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using aluminium U channel of size 15 mm x 15 mm and 1.40 mm thick and fixed on wall , with screw to the under layer , repair to the edges of panels and finishing the aluminium U channel while cement is green complete all as per specifications and direction of the Engineer-in-charge. |
| 118 | Supply for Pipe Supporting Clamping - Single Pipe of dia 20 mm (3/4\") down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt Rubber Sleeve mounted system running vertically with wall distance 100 mm (4\"):Pipe Support Clamping made of: 1. Mono Bracket for 20 mm (3/4\") pipe having Wall Distance 100 mm (4\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs.2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 20 mm (3/4\") pipe, Wall distance 75 mm (3\") - 1 Nos. 2. U Bol Rubber Sleeve mounted for 20 mm (3/4\") GI / UPVC/ CPVC pipe Dia. - 1 nos and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\") - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make : Shaivi or equivalent as approved by GE. |
| 119 | Supply of Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt System for Five Pipelines (110mm + 75mm + 25mm + 20mm + 15mm) running Vertical Fixed line with wall distance 4\" (100 mm):Pipe Support Clamping made of:1. Profile Bracket Wall Distance 100 mm (4\") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Slotted \"C\" Channel B3 Type to be used of size 712mm (28\") (Continuous Slotted \"C\" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. (Contd/...) |
| 120 | Item No 118 Contd/...3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 Hotdip Galvanizing: As per x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated.Material Grade: IS 1079 used as per MTC IS 2629 (1985)-610 grams/m2 (>85 microns). confirms to EN 10204 3.1.Material Quantity for one unit: 1. Profile Bracket of Wall distance 3\" (75 mm)-2 Nos. 2. Slotted C Channel of Size 28\"(712mm) - 1 No.; 3. U Bolt Rubber mounted for 4\" (110 mm) Pvc pipe Dia. -1 nos. ; 4. U Bolt Rubber mounted for 3/4\" (20mm) Pvc Pipe Dia -1 nos.; U Bolt Rubber mounted for 1/2\"(15mm) Pvc Pipe Dia -1 nos.; U Bolt Rubber mounted for 3\"(75mm) Pvc Pipe Dia -1 nos. ; U Bolt Rubber mounted for 1\"(25mm) Pvc Pipe Dia -1 nos. ;5. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2\") Zn coated-4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make: Shaivi or equivalent as approved by GE. |
| 121 | Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika |
| 122 | M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap of PVC SWR 100 mm boreand applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat@1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed withWPC Conplast - 421, area offloor/kitchen/toilet/bathupto 3..00 Sqm complete all as specified and as directed. |
| 123 | S&F LDPE pipe 40mmbore fixed to wall/ceiling with bends/elbow complete all as specified. |
| 124 | S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed. |
| 125 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to 150mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe including demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement concrete mortar complete all as specified and as directed. |
| 126 | M&L for 150 mm bore PVC SWR drain pipe laid in floor or in trenches incl connecting with solvent cement and jointing complete with socket , complete all as specified and as directed. |
| 127 | M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly)all as specified and directed. |
| 128 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil. |
| 129 | Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm. |
| 130 | Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. |
| 131 | S&F Stainless steel Z type hinges 75 mm longmedium weight fixed with SS star headed screw complete all as spd and directed as in Kitchen cabinet cupboardshutters all as spd and directed. |
| 132 | S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele |
| 133 | S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele |
| 134 | S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.Make :Hettich, Hafele, Butterfly |
| 135 | S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly |
| 136 | S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer-in–charge. Make :Hettich, Hafele, Butterfly |
| 137 | S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make : Hettich, Hafele, Butterfly |
| 138 | S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304with necessary slidingchannel frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in - charge. Make : Hettich, Hafele, Butterfly |
| 139 | Supply chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding channel frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.” Make : Hettich, Hafele, Butterfly |
| 140 | S&F in repairs 15mm bore CP central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm Cartridge size complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5167NB or equivalent in kohar, grohe and Roca. |
| 141 | S&F 100 mm long extruded brass handles, fabricated type polished for modular kitchen as specified and directed. |
| 142 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. |
| 143 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steelsheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screwscomplete all as specified and as directed. |
| 144 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steelsheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screwscomplete all as specified and as directed. |
| 145 | S&F steel work (tubular/hollow) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed. |
| 146 | M&L for providing and fixing in repair Stainless steel (Grade 304)railing made of hollow tubes, channels, plates etc. , including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemnet and its components including levelling, grouting, providing holes as required for services etc. complete all as specified and direction of Engineer-in-Charge. |
| 147 | S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India |
| 148 | S&F 4.80 mm thick black tinted glassof any size in each pane complete all as specified and directed |
| 149 | Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 150 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 151 | M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cableand one single core 1.5 sqmmsizecopper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters etc.fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-(a) |
| 152 | One light point/ exhaust fan point controlled by one switch |
| 153 | One fan point controlled by one switch |
| 154 | One 5 pin socket outlet. 5 Amps on the same board. |
| 155 | One 5 pin socket outlet. 5 Amps on the independent. board |
| 156 | One bell/ buzzer point controlled by one push button |
| 157 | One light point controlled by two two way switches. |
| 158 | All as per item No- 149 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire. |
| 159 | Supply and fix switch piano modularsingle pole one way 6 Amps one module complete all as specied . |
| 160 | Supply and fix switch piano modularsingle pole one way 16 Amps one module complete all as specied . |
| 161 | Supply and fix Modular switch 2 way 6A, 1 modulee complete all as specied . |
| 162 | Supply and fix Modular Bell push 6A 1 module complete all as specified . |
| 163 | Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed. |
| 164 | Supply and fixmodular socket outlet6A - 2/3 pin combined 2 module (multi purpose ) complete all as specified and as directed. |
| 165 | Supply and fix modular socket outlet6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed. |
| 166 | Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed. |
| 167 | S & F in replacement oflampangle/batten holderBakelite complete all as specified and as directed. |
| 168 | S & F Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.. Make Havels, model- LHDL06160099 (CITY 3) |
| 169 | S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCAsheet with snap on installer sutable fordouble side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model-Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj |
| 170 | S &F New E-Lite LED Pride Plus Neo. Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack With 10watt LED tube |
| 171 | Supply and fix fan step regulator, 120W - 2 module for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc completeall as specified and as directed. |
| 172 | Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed of 12 Ways |
| 173 | Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed of 4 Ways |
| 174 | Supply and fix in replacement MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed. |
| 175 | Supply and fix in replacement MCB SPN32Amps, 240 volts complete all as specified and as directed. |
| 176 | Supply and fix MCB SPN 40 Amps, 240 volts complete all as specified and as directed. |
| 177 | M & L sub main wiring with 2 single core, 10 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRcable 1100 Volts grade incl 10 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSas continuous earth wire and connecting to common earth terminals completeall as specified and directed in PVC conduitsNote :-(i) Two run of copper cable and one run of earth wire and PVC conduit shall be measured as one length. |
| 178 | Ditto all as per item No - 169 above but with 2 runs of 4 Sqmm cable with one run of 4.0 Sqmm cable for earthing. |
| 179 | S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed. |
| 180 | Supply,install, testing & commissioning of factory made LT panel wall mounted board made outof CRCA sheet 2 mm thick indoor type toltally enclosed weather,dust and vermin proof compartment type with front hinged door and locking arrengement mounted on M S flat iron clamp welded to panel body duly grouted on wall 415 V, 3 phase, 4 wire AC, 50 Hz having aluminium bus bar 160 Amps for pfase-03 Nos & neutral- 01 No with 02 Nos Earth Terminals. insulated with PVC sleeves, space for fixing single phse KWH Emergy meter 04 Nos 40x40x6 mm size angle iron hold fast, fastener bolts, copper lugs, spacers channels,rubber gaskets, locking knob, hylem sheet piece,PVC shrinkable sleeves, nut and bolts, washers etc suitable single core copper wire connectors, suitable compartments and epoxy power spray paint with primer complete all as specified including the following accessoriesincluding taking down old unservicable LT panel boardINCOMING- a) MCCB 415 V 4 POLE 25 KA breaking capacity of 63 Amps- 01 No b) R-Y-B phase LED indicating lamp-03 NosOUTGOING-a) MCB SPN 40 Amps, 230V, 10 KA, C curve - 05 Nosb) Providing space for and refixing existing single phase KWHelectric enery meter-04 Nos c) Copper wire 10 Sqmm wire and open terminals for all meters totaly pre wired. d) Glass windows for all meter for taking meter readingNote:-1. Cost of taking down electric meters from old unserviceable penel board keeping in safe custody, and refixing the same electric meters in new panel is deemed to be includede in rate quoted. |
| 181 | Taking down old unserviceable Exhaust fans, depositing to AGE E/M store & Supply and fix new exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm. (cutting hole in wall for instalation of exhaust fan is deemed to be included in rate quoted) |
| 182 | Taking down old unserviceable ceiling fans, depositing to AGE E/M store & supply and fixingnew ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) |
| 183 | Taking down old unserviceable storage type water heater, depositing to AGE E/M store & supply and fixingnew electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc |
| 184 | \"M&L earthing GI4mm GI wire complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI wire 4 mm size by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and includingnecessary excavation and earth work in any type of strata, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc., complete all as specified. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
