|
| 1 | Excavating in trenches n.exc. 1.5 m wide and 1.5m deep n.exc 10 Sqm. on plan and getting out in any type of soil, complete all as directed by Engr-in-Charge. |
| 2 | M&L for PCC (1:4:8) type D-2(40mm graded agg) in fdn filling & mass concrete etc., complete all as directed by Engr-in-Charge. |
| 3 | M & L for Fly ash bricks 230x115x75 mm sub class Bin cm 1:6 curved on plan exc. 6.0 m mean radius including raking out joints after masonry work, complete all as directed by Engr-in-Charge. |
| 4 | Material & labour for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in DPC including necessary formwork required at site complete all as directed by Engr-in-Charge.. |
| 5 | Returning, filling in including spreading, leveling wateringand well ramming in layers not exc 25 cm thick in any type of soil, complete all as directed by Engr-in-Charge. |
| 6 | Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified. |
| 7 | M&L for PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed. |
| 8 | M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed. |
| 9 | M&L for 18 to 20mm thick Granite (telephonic black) work (table rubbed and polished) in steps,pillars;window cills/jamb, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as counters of any radius etc laid over and including 15mm thick screed bed in Cement Mortar (1:6) incl moulding/polishing at both edges complete all as spcecified and directed. |
| 10 | M&L for 600x600x7-8 mm thick, ceramic tiles satin finish with carvings, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as spcecified and directed. |
| 11 | M&L for 600x600x7-8 mm thick, ceramic tiles satin finish with carvings in skirting etc. set and jointed in neat cement slurry & pointed out in white or coloured cement to match laid over and including 10mm thick plaster in CM 1:4 complete all as spcecified and directed. |
| 12 | Form work tosides and soffits of lintel/roof beams roof slabs etc for fair faces of concrete flat complete all as spcecified and directed. |
| 13 | S&F TMTbarsas in reinforcement 10mm dia cut to length, bent to shape required incl. cranking, bending and binding with MS wire not less than 0.9mm dia complete all as spcecified and directed. |
| 14 | S&F TMTbarsas in reinforcement 6-8mm dia cut to length, bent to shape required incl. cranking, bending and binding with MS wire not less than 0.9mm dia as in stirrups, complete all as spcecified and directed. |
| 15 | M&L for RCC nominal mix Type B1 1:2:4(20 mm graded aggregate) aggregate as inbeams, lintels, complete all as spcecified and directed. |
| 16 | M&L for rendering 15mm thick in CM 1:4 on other than fair facesof brick work or concrete surface in two layers i.e 10+5mm, (5mm thick top layer will be mixed with water proofing compound) finished even and smooth without using extra cement complete all as specified specified and directed . Note :- WPC will be measured and paid seperately. |
| 17 | Supply only Water proofing compound of approved make complete all as spcecified and directed. |
| 18 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick walls andfinished even and smooth without using extra cement complete all as spcecified and directed. |
| 19 | Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over putty 2 mm thk complete all as specified and directed. |
| 20 | Material & labour for preparation of newly plastered surfacesof walls etc and applying two coats of cement based paint over a coat of alkali rsistant priming paint in wall complete all as spcecified and directed. |
| 21 | Supply & Fixing glazed ceremic tiles 300x600 x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing coat in CM 1:4 with and including triangular filletting in CM 1:4 on top edges complete all as specified and as directed. |
| 22 | Supply & Fixing Non skid ceremic tiles 300 x 300 x 6 to7 mm thick colouredset and jointed in neat cement slurry and pointed in colourcement to match tiles as in floor laid over and including 15mm thick cement mortor (1:6) screed bed, complete all as specified and as directed. |
| 23 | S & F in Aluminium anodised powder coated as approved by E-I-C three track sliding window with with two shutters with 4mm thick tinted sheet glass of approved shade and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of \"JINDAL\" or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. |
| 24 | S&F, aluminium anodised with powder coated as approved by E-I-Clouvered ventilator with provision of exhaust fan usingAluminium section including 5mm thick frosted glass and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mmetc complete and following aluminium powder coated sections conforming to catalogue of \"JINDAL\" or of equivalent make and rubber beading etc all as directed. (a) SP - 20048 (b) Glazing clips - 19352. complete all as specified and directed. Note: Exhaust fan shall be measured and paid seperately |
| 25 | S&F MS angle iron /flat, round bar section as in framed work such as grills etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including MS sheet for base of water tank staging conforming toe.290.Gde-E-165, complete all as specified and as directed. |
| 26 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite /borer proof, with both side laminated wooden texture as approved water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size 100 mm with necessary full body threaded star headed counter sunk S.S screws, complete all as directed by Engineer-In-Charge. |
| 27 | Supply & Fixing aluminum anodized barrel tower bolts of extruded section 150 mm long, complete all as specified and as directed. |
| 28 | Supply & Fixing aluminum anodisedhandles cast type 150mm long, complete all as specified and as directed. |
| 29 | S&F300 mm stainless steel aldrop/ sliding door bolt of selected quality, fabricated type, complete all as specified and as directed. |
| 30 | S & F MS angle iron section of any size, section, rolled sections as in main and cross beams,rafters; purlins where connected to common rafters and running rails a fixed with angle cleats or other connecting plates Fe 410 -W(GdeE- 250) quality A, complete all as specified and as directed. |
| 31 | M & L for preparation of old steel surface exceeding 10 Cm width or girth and apply one coat of synthetic enamel paint complete all as specified & directed. |
| 32 | Material & Labour PCC (1:3:6) type C2using 40 mm graded stone aggregate as in plinth protection/Path etc laid in bays.incl necessary form work finishing even and fair with using extra cement 75 mm thickness, complete all as specified and as directed. |
| 33 | M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 34 | S&F hume pipe septik tank 0.90 m dia and 2.50 length fixed complete with and including excavation in any type of soil, returning filling, PCC bed concrete 1:4:8 type D2, gas pipe pvc 110 mm dia 2.10 mtr ht with vent cowl fixed over septik tank complete all as directed. |
| 35 | S&F PVC (SWR) soil waste and vent pipes110 mm bore in any length, single socketed with rubber ring joints fixed to walls, complete all as directed by Engr-in-Charge., complete all as directed by Engr-in-Charge. |
| 36 | S&F PVC (SWR) soil waste and vent pipes75 mm bore in any length, single socketed with rubber ring joints fixed to walls, complete all as directed by Engr-in-Charge. |
| 37 | S&F PVC (SWR) bend 110 mm bore all as specified and directed fitted with oval access door, complete all as directed by Engr-in-Charge. |
| 38 | S&F PVC (SWR) bend 75 mm bore all as specified and directed fitted with oval access door, complete all as directed by Engr-in-Charge. |
| 39 | M & L for PVC (SWR) floor Trapwith grating dia of outlet 75 mm dia including jointing with solvent cement, complete all as directed by Engr-in-Charge. |
| 40 | M & L for PVC (SWR)vent cowl 110 mm bore including jointing with solvent cement, complete all as directed by Engr-in-Charge. |
| 41 | S & F 150 mm dia RCC pipe class NP2 as in sewer line with and including necessary excavation in any type of soil, returning filling and removal surplus soil to a distance nexc 50 mtr concrete bed 1:4:8 type D-2 as in drain pipes including packing under, and haunching against the side of pipes after they are laid and tested in 300mm bore of pipe, complete all as specified and directed. |
| 42 | S&F in replacement rotational moulded polyethylene water storage tank 250 Litres capacity, double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including making all connections to inlet and outlet pipe lines,including providing of new tank nipples of suitable size, complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F gun metalglove or gate valve, with iron wheel head screwed both ends for iron pipes and fixed to 20mm bore of pipe, complete all as directed by Engr-in-Charge. |
| 44 | S&F ball valves high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed to 20mm dia of pipe complete all as directed by Engr-in-Charge. |
| 45 | S&F 15mm bib cock of cast copper alloy (CP) screwed down for iron pipe, complete all as directed by Engr-in-Charge. |
| 46 | S&F 15mm dia bore galvanised medium grade steel water tubing with all fittings and fixed to wall, ceiling and floors etc completeincluding taking downold corroted pipes, complete all as directed by Engr-in-Charge. |
| 47 | S&F 20mm dia bore galvanised medium grade steel water tubing with all fittings and fixed to wall, ceiling and floors etc completeincluding taking downold corroted pipes, complete all as directed by Engr-in-Charge. |
| 48 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as directed by Engr-in-Charge. |
| 49 | S&Fvitreous chinaSquatting pan ORISSA PATERN 580x440mm white with integral foot restcomplete with pan and trap including connection to drain or out going pipe and to flushing pipe anti syphonage pipe, complete all as directed by Engr-in-Charge. |
| 50 | S&Fvitreous chinawhite, wash basin, flat or angle back type, size 550 x 400 mm including bracket, pillar tap CP alloy, 15 mm dia, waste chain and plug , CP stop cock 15 mm dia and waste pipe and PVC connection suitable for 15 mm dia complete all as directed by Engr-in-Charge. |
| 51 | S&Fstop valves , cast copper alloy Fency type Chromimum plated,screwed down , high pressure , with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed15 mm dia complete all as directed by Engr-in-Charge. |
| 52 | S&F pillar tap fancy type chromium plated with with capastan head , screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as directed by Engr-in-Charge. |
| 53 | S&F in repairs PVC low/highlevel flushing cristern white 10 ltrs capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle including bracats complete all as directed by Engr-in-Charge. |
| 54 | M&L for providing precast reinforced cement concrete 1:2:4 type B-1 as in manhole cover slab, chajja, shelves and similar articles with plain faces including chamfers, weatherings, throating etc. and setting in cement mortar 1:6, complete all as specified & directed. |
| 55 | Spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required, complete all as directed by Engr-in-Charge. |
| 56 | M&L for 300x300x25mm thick high glossy finish chequrred tiles as in floor set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed |
| 57 | M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes including necessary surface dressing, complete all as specified and directed. |
| 58 | M&L for point wiring in concealed with PVC insulated unsheathed, single core multistandard copper Point conductor cable(FRLS) of size 15 Sqmm, 1100 volts grade including 15 Sqmm PVC insulated unsheathed copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its accessories including necessary modular metal boxes flushed in wall and modular white cover plates for fixing switches sockets, fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 13 for one light /CB/fan point controlled by one switch, complete all as specified and as directed. |
| 59 | All as per item No 57 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches complete all as directed by Engr-in-Charge |
| 60 | All as per item No 57 above but for one 3/2 Pin 5 Amp socket out let point on the independent board complete all as directed by Engr-in-Charge |
| 61 | All as per tem no 57 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket point complete all as directed by Engr-in-Charge |
| 62 | S&F Modular switch 1 way 6A 1 module complete all as specified and directed |
| 63 | S&F Modular switch 1 way 16A 1 module complete all as specified and directed |
| 64 | S&F Socket 6A-2/3 pin combined 2 module, complete all as specified and directed |
| 65 | S&F Socket 6A/16A-2/3 pin combined 2 module, complete all as specified and directed |
| 66 | S&F modular type fan regulator 120 Watts, 2 module, complete all as specified and directed. |
| 67 | Supply and fix ceiling rose surface bakelite 65x50 mm two to three terminals, complete all as specified and directed. |
| 68 | S&F single pole 06 to 32 A rating 240V 10KA \"C\" curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and as directed |
| 69 | S&F SPN 32 A rating 240V 10KA \"C\" curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning complete all as specified and as directed |
| 70 | S&F sheet metal enclosure, (for DB\"s when MCBs to be used), flushed in wall single pole and neutral Double door 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB\"s and isolators etc complete all as specified and as directed |
| 71 | S&F LED batten suitable for indoor application 20 W. 4\" length, wall mounted with extruded aluminium Each housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge |
| 72 | Supply and fixing LED 35 Watt street light fitting IP-66 for bldg security complete with light grade Gi Each brackets, Nuts, bolts, clamps complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and as directed |
| 73 | S&F LED light fitting mirror type with high output diffuser 2 feet, 10 W 220 V AC decorative type with Ca driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed |
| 74 | S&F LED light fitting 1X9 W bulkhead luminaires with lamp holders etc complete with all accessories including connecting up with twin core twisted flexible copper conductor cable complete all as specified and as directed by Engr-in Charge |
| 75 | Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete including connecting with 3 core flexible copper conductor Including taking down the existing ceiling fan and depositing the same in MES store complete all as specified and as directed |
| 76 | Supply and fix electric water heater, storage type ABS body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve thermostat, NRV, connection piece etc complete all as specified and as required at site |
| 77 | Supply and fix exhaust fan 250 mm sweep with louvre plastic body complete fixed to window/wall with suitable fastening and connecting up including provision of cable from connector to fan with flexible copper conductor cable 24/0.2mm complete all as directed |
| 78 | M&L for laying double wall corrugated HDPE pipe, UV stabilized of size 40X32 mm (ODX ID), IS-6205 for cable RIM protection laid in trenches or fixed to walls complete all as specified and as directed |
| 79 | Supply & Fixing of Gl pipe light grade 40 mm dia including fittings and fixtures for cable protection laid in trenches under road/culvert etc complete all as specified and as directed |
| 80 | M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling & mass concrete or for repairing to road cutting, complete all as specified and directed. |
| 81 | Supply & Fixing of Gl pipe light grade 40 mm for cable protection fixed to poles/bldg incl two Nos MS clamps made to shape out of 25 x 3mm MS flat and painting including bolt, nut, washer etc, complete all as specified and directed. |
| 82 | Supply and Laying, connecting & all testing and commissioning of XLPE insulated, earthed, screened, PVC RM bedded, galvanised steel strip or wire armoured electric (heavy duty) cable with stranded aluminium conductor 1100 volts grade cross sectional area of 16 sqmm 2 core, complete all as specified and directed.Note:- Excavation, earth work and cable protection of pipes will be measured and paid separately under relevant items |
| 83 | M & L for earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in ground vertically in ground with top edge not less than 1.25 mtr deep below normal ground level connected with and including galvanised iron wire 4 mm dia as earthing lead by means of nuts bolts and washers of galvanized iron, protected by 15mm dia (medium grade) Gl tubing, funnel, wire mesh, 20 mm bore Gl tubing (light grade) watering pipe, including concrete pit in PCC (1:36) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size, charcoal and salt in alternate layers necessary excavation and earth work in any type of soil all as shown in Electric plate No 3 of SSR part-I and testing on completion complete all as specified and as directed |
| 84 | Supply, laying and connection of Gl pipe, 25 mm dia, medium grade with all fittings & fixtures laid in trenches complete all as specified and directed Note:- Excavation and earth work shall be measured and paid separately |
| 85 | Supply & Laying new GI tubing 20 mm bore medium grade galvanised with all fitting and fixtures, fixed to walls, ceilings or laid under floors, complete all as specified and directed. |
| 86 | S & F 25 mm dia size gun metal globe/gate valve with inner wheel head screwed both ends for iron pipes complete all as specified and directed |
| 87 | Supply and fixing ball valves of size 25 mm high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 455 gms), complete all as specified and directed. |
| 88 | S & F Pre-painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an approved colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of existing unserviceable plain or corrugated steel sheeting from roof covering complete all as specified and directed. |
| 89 | S & F Pre- painted galvalume aluminum zinc coating Gl based plain steel sheet 0.50mm thick of an approved colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of existing unserviceable plain or corrugated steel sheeting from roof covering complete all as specified and directed. |
| 90 | M & L for cutting and screwing existing steel/Gl tubing for alterations or additions (each cut measured) of size 25 mm, complete all as specified and directed. |
