|
| 1 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each |
| 2 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each |
| 3 | Taking downshutter from the frame) Exc 1. Sq m but n.exc 2.00 Sq m each |
| 4 | M & L for 12 to 15 mm thick machine cut green marbel stone in single piece in window/opening (Jambs/Cills), steps threads, raiser and equivalent laid over cement screed and jointed withbase laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick plastering with cement mortar 1 : 3 including necessary adhesive complete all as specified |
| 5 | M&L for 40mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side)Complete all as specified and as directed. |
| 6 | S & F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc squares withsash bar of framing plain, chamfered or rounded, fitted with cut ,mitered andmoulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 7 | M & L for preparing newwoodensurface of any description not otherwise described over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 8 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification and drawing complete all as specified and as directed. |
| 9 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. all as specified and directed. |
| 10 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 11 | S&F Factory MadeSolid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face &2mm thick Moulded Prelam PVC Sheet on the front face &2mm back face, supplying & fixing in frame at site as per specification & drawing |
| 12 | S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 13 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 14 | S&F for(Fe 410w Gde-250 quality-A) Framed work as in doors, windows or gates or grill/grating of angle or other section withgusset plates, rails, braces, etc., complete, drolled for fixing of steel sheeting or other covering. Doors/Windows, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete. |
| 15 | M & L for preparing newsteel surface of any description not otherwise described over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer. |
| 16 | S&F 4.00mm thick sheet glass, selected ordinary quality and glazing with rubber beading or with glazing clips exc 0.5 sq. m in each pane including solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed. |
| 17 | S&F 4.00mm thick figuredglass, pin head typeand glazing with rubber beading or with glazing clips n exc 0.5, all as specified and directed. |
| 18 | S&Fstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 19 | Dismantling boarding, any description, fixed in any position with nails all as specified. |
| 20 | S&F in 18mm thick HDHMR BOARD exterior grade including any coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century. |
| 21 | S& fixing 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 → |
| 22 | M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed. |
| 23 | S & F 150 mm Aluminiumhandles, febricatedtype anodised or fixing to door/cupboard/kitchen cabinet etc,completeall as specified and as directed. |
| 24 | S & F 100 mm Aluminiumhandles, febricatedtype anodised or fixing to door/cupboard/kitchen cabinet etc,completeall as specified and as directed. |
| 25 | S & F200 mm long aluminium anodised barrel tower bolt fixed to wiremesh door and equivalent all as specified. |
| 26 | S & F 150mm Stainless steel barrel tower bolts and fixed all as specified. |
| 27 | S & Faluminium anodisedHasp and staple, safety type of size 75 mm with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 28 | S&F floor door stopper of stainless steel and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 29 | S&F of 300 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 30 | S&Fsteel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed. |
| 31 | S& F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 32 | S& F in repair aluminium extrudedbodydoor closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed |
| 33 | S&F Mortice latch with two levers 100mm long (vertical type), mild steel body and fixed |
| 34 | S&Fin repair Mortice latch with two levers 100mm long (vertical type), mild steel body and fixed |
| 35 | S & F Continuous (piano) hinges,30 mm flape mild steel, bright finish or electrogalvanised → |
| 36 | Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, |
| 37 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in CM 1:6 |
| 38 | Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc. |
| 39 | M & L Rendering 10 mm thick onfair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement) |
| 40 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces with CM (1:4) finished even and smooth by adding water proofing compound @ 3% by weight of cement without using extra cement.(Note: WPC item paid seperatly ) |
| 41 | Supply only Internal water proofing compound (Liquid type) all as specified and directed. |
| 42 | M&L Rendering 5 mm thick onfair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) |
| 43 | M&L for Preparing new plaster surface applying a layer of 1mm wall care puty on wall andtwo coat of distemper oil emulsion over a coatofprimeron internal walls complete all as specified. |
| 44 | M&L for Preparing new plaster surface of wallapplying three coat of white wash on wall complete all as specified. |
| 45 | M & L prepration of surface on wall and applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.. |
| 46 | M&L for Preparing new plaster surface apply three coat of white wash on ceiling complete all as specified. |
| 47 | S&Fin repair 25mm dia stainless steel tubular curtain rodnot less than 0.90 mm thick andfency type socket fixing with brackets, stop, rollee etc co 1 mm thick mplete all as specified and directed.Note: design of socket shall be approved by GE/AGE at the time of execution) |
| 48 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples or wooden beading complete all as specified and directed. |
| 49 | Hacking out old broken glass (any thickness, quality or description) from wooden frame/metal frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 50 | S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and directed. |
| 51 | S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed |
| 52 | Demolition of cement concrete(unreinforced)of any description and in any position not otherwise specifically provided for roof complete all as specified and directed. |
| 53 | M&L Cement concrete type B0 1:2:4 (12.50 mm graded aggregate) as in Coping, rounded or chamfered on edgescomplete all as specified and as directed. |
