|
| 1 | Taking down carefully un-serviceable/old rolling shutters of size exceeding 5 Sqm but n. exc 10 Sqm each, gear operative type for replacement of un-serviceable/defective parts, denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling to make the system smooth/easy functional, repair to locking arrangements including supply and fix new nuts & bolts of existing size by removing old/rusted nut and bolts wherever required, necessary welding where ever required as directed, giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work carried out complete all as specified and as directed by the Engr-in-Charge. |
| 2 | All as per ser Item No.01 above but of Push and Pull or manual type complete all as specified and as directed by the Engr-in-Charge. |
| 3 | Taking down carefully old serviceable/damaged rolling shutter of any type complete and removing from the site complete all as specified and as directed by the Engr-in-Charge.. |
| 4 | Supply & fix steel rolling shutters, factory made, with out ball bearing with thickness of laths 1.25mm push and pull or manual type inculding top cover, anchoring rod, hasp and staple with one shop coat of red oxide or zinc staple with one shop coat of red oxide or zinc chrome primer and fixed in position, in existing opening complete all as specified and as directed by the Engr-in-Charge.. |
| 5 | All as per ser Item no. 4.00 above but gear operated type with bevel gear box and crank handle complete all as specified and as directed by the Engr-in-Charge. |
| 6 | Taking down existing unserviceable / defective suspension shaft and S&F new suspension shaft not exc 3.50m in length alongwith helical wire spring or flat sprial of proper counter balancing the weight of shutter complete all as specified and as directed by the Engr-in-Charge. |
| 7 | Taking down unserviceable/defective bevel gear box and S&F new bevel gear box in position with all necessary connected fittings complete all as specified and as directed by the Engr-in-Charge. |
| 8 | Material & labour for preparation of old steel painted surfaces of any description exc 10 cm with or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by the Engr-in-Charge |
| 9 | Supply only hood cover made out of 1.00mm thick MS sheet complete all as specified and as directed by the Engr-in-Charge. |
| 10 | Dismantling asbestos cement (corrugated, Semi corrugated ,etc ) sheets in roof coverings complete all as specified and as directed by the Engr-in-Charge. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by the Engr-in-Charge. |
| 12 | Supply & fix framed work such as grills, gratings, railing and grill of balcony etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Grill on drain etc similar work con- forming to Fe.290.Gde-E-165 for balcony and staircase repair special care with safety precaution need to be taken as per GOI norms height shall be 15m for balcony railing repairs complete all as specified and as directed by the Engr-in-Charge |
| 13 | Supply & fix structural steel works as in tubular roof trusses, purlins, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , MS plate, rivetingincl bending and welding, conforming to Fe – 410W Gde E -- 250 quality A complete all as specified and as directed by the Engr-in-Charge. |
| 14 | Supply & fix pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engr-in-Charge. |
| 15 | Supply & fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engr-in-Charge. |
| 16 | Supply & fix Mild steel works as in wind ties for roof including securing bolts, all necessary drilling etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by the Engr-in-Charge. |
| 17 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, anythickness, including cover fillets complete all as specified and as directed by the Engr-in-Charge. |
| 18 | Material & labour for Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm with Semi perforated 12mm thick thick micro tegular edged GRG false ceiling tiles of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987 Noncombustible as per4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fullymm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in complete all as specified and as directed by the Engr-in-Charge. |
| 19 | Supply & fixing in repairstank top cover (lid) white with locking arrangement complete of make : Sintex suitable for 500 ltr to 1000 ltr capacity complete all as specified and as directed by the Engr-in-Charge.. |
| 20 | Taking down existing roof treatment & felt cleaning the surface by hacking to receive plaster and removingdemolished material outside MD land etc complete all as specified and as directed by the Engr-in-Charge.. |
| 21 | Demolition of unreinforced Concrete of any description and any position not otherwise specifically provided&removing debris outside MOD land complete all as specified and as directed by the Engr-in-Charge.. |
| 22 | Material & labour for PCC 1:2:4 B-0 using 12.5mm graded aggregate as levelling course to finished even and smooth with using extra cement complete all as specified and as directed by the Engr-in-Charge… |
| 23 | Material & labour for rendering 10mm thick on CM (1:3) on concrete roof top and chajjas surface finished even and smooth to getuniform level surface forlaying of membrane treatement,with using water proofing compound complete all as specified and as directed by the Engr-in-Charge... |
| 24 | Material & labour for APP modified roof treatment over exissting RCC roof in repairs complete all as specified and as directed by engineer -in-charge and as specified hereunder (a) Applying bitumen primer @ 0.40 lit/sqm with density of 0.87 kg/lit at 25 degree C on the prepared dry roof surface(b) Laying 4mm thick APP membrane including aluminium layer on top, weight not less than 3.50 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorised applicator of manufacturer of APP membarane. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer including taking down and refixing any elecric cables, outlet of AC\"s without any damage & wothout any extra cost etc complete all as specified and as directed by the Engr-in-Charge. |
| 25 | Material & labour for 75 mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finishing even and smouth without using extra cement complete all as specified and as directed by the Engr-in-Charge |
| 26 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) including iron mongry and removing from site complete all as specified and as directed by the Engr-in-Charge |
| 27 | Taking downchowkats or frame exc 1.5 sqm but n.exc4 sqm each with shutters (without taking off shuttersfrom the frames) complete all as specified and as directed by the Engr-in-Charge. |
| 28 | Taking down shutters only of any description exc 1sqm and n exc 2 sqm each complete all as specified and as directed by the Engr-in-Charge. |
| 29 | Material & labour for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws complete all as specified and as directed by the Engr-in-Charge. |
| 30 | Supply & fix 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work complete all as specified and as directed by the Engr-in-Charge |
| 31 | Supply & fix in repairs double action floor spring hydrauilically regulated made up of minimum 1.25 mm thick aluminium alloy sheeet foundationbox, main body with stainless steel cover governing pivotmade of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by the Engr-in-Charge. |
| 32 | Supply & fixin repairsbrassmortice lock, vertical type, size 100 mm , 4 levers with 2 keys complete all as specified and as directed by the Engr-in-Charge |
| 33 | Supply & fix Aluminium (extruded section)Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters up to 1000 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed by the Engr-in-Charge |
| 34 | Supply & fix 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping/fixed in aluminium section for windows doors etc in square not exc 0.58 Sqm each in each pane complete all as specified and as directed by the Engr-in-Charge |
| 35 | Supply & fix 3 mm thick figure glass/ tinted glass ordinary quality and glazing with oil putty/wooden lappingin square not exc 0.58 Sqm each in each pane, lovers etc complete all as specified and as directed by the Engr-in-Charge |
| 36 | Supply & fix pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed by the Engr-in-Charge |
| 37 | Supply & fix pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed by the Engr-in-Charge |
| 38 | Supply & fix 30 mm thick flush shutters, solid core construction, with Block board core and plywoood face panels,commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by the Engr-in-Charge |
| 39 | Supply & fix 35mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reoundedmiltred and related sash bars number to received glass gauze etc edges of framingplain chamfered or reounded fitted with cutand mitred beads for securing glass etc size of members of shutters as specified inSSR Part-I section 8 clause 8.20(a)supplied and fitted to chawkats complete all as specified and as directed by the Engr-in-Charge |
| 40 | Material & labour for prepartion newwooden surfaces ofany description, not otherwise described over 10cm width or girth andapplying two coats of synthetic enamed paint over a coat of pink primer complete all as specified and as directed by the Engr-in-Charge |
| 41 | Material & labour for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and applyone coat of synthetic enamel paint complete all as specified and as directed by the Engr-in-Charge |
| 42 | Supply & fix door sliding bolt aldrop 250 mm long aluminium anodised complete all as specified and as directed by the Engr-in-Charge |
| 43 | Supply & fix in repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and as directed by the Engr-in-Charge |
| 44 | Supply & fix aluminium andodized, 150mm length of bolt barrel tower bolts ofextruded section complete all as specified and as directed by the Engr-in-Charge |
| 45 | Supply & fix aluminium andodized, 75 mm length of bolt barrel tower bolts ofextruded section complete all as specified and as directed by the Engr-in-Charge |
| 46 | Supply & fix floor door stopper 150mm long , of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by the Engr-in-Charge |
| 47 | Supply & fix in repair stainlesssteel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed by the Engr-in-Charge |
| 48 | Supply & fix MS butt hinges 100 mm size cold rolled medium weight and fixed complete all as specified and as directed by the Engr-in-Charge |
| 49 | Supply & fix aluminium handles cast moulded type 150mm size fixed with screws complete all as specified and as directed by the Engr-in-Charge |
| 50 | Material & labour for solid PVCdoor frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing will be painted to match with printed sheedcomplete all as specified and as directed by the Engr-in-Charge |
| 51 | Supply & fix factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by the Engr-in-Charge |
| 52 | Supply & fixin repairs fatory PVC Internal door frame of the size 120mmx50mm (double door frame) with a wall thickness of 5mm PVC celuka sheet of density 600Kg/Cum manufractured by an ISO-9000 certified company, made out of extruded 5mm PVC celuka sheet, mitre cut at two corners and joined with two Nos, of 150mm long brackets of 15mmx15mm M.S Square tube. The two vertical door profiles are to be reinforced with 20mm x20mm M.S tube of 19 guage throughout the frame.The door frame shall be fixed to the wall using 65/100mm long M.S screws through the frame by using PVC fasteners. Alminimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc complete all as specified and as directed by the Engr-in-Charge |
| 53 | Supply & fix in repairs30mm thickfactory made internal PVC one side prelem door shutter wood free consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles as well as top bottom & lock rail.The inside panel shall consist of 20mm thick multi chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement adhesive with 5mm (+0.5) thick prelam PVC sheet of the inside panel.All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet baton(made by sticking 2Nos. rigid foam PVC sheets of 5mm (+0.5) thickness using PVC solvent cement adhesive. 20mm thick (5mm x 4 Nos) Thick PVC sheet to be given for lock provision at lock provision at lock height complete all as specified and as directed by the Engr-in-Charge |
| 54 | Supply & fix in repairs 30mm thickfactory made wire mesh solidPVC door shutter consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles and15mm x 15mm for top, lock & bottom rails.20mm x 20mmM.S squaretubes shall be covered with 5mm thick heat moulded Rajshri PVC \"C\" channel of size 30mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be PVC beading on either side forming stiles & 5mm thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on from lock rail 10mm (5mm x2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail.Panel will be Alumunium wire mesh fitted in by \"C\" channel of size 35mm x 10mm on the eitherside in stiles.The inner side \"C\" channel is fixed by 20mmx 20mm M.S. tube on both sides with screws.The wire mesh in top, bottom & lock rail is sealed with total 8 Pars of 15mm x 15mm & 20mm x 20mmtube with Aluminium wire 10mm (5mm x 2) thick PVC strip of 25mm width is to be stuck & nails on both side of Aluminium wire mesh interior at the top, bottom & lock rail complete all as specified and as directed by the Engr-in-Charge |
| 55 | Supply & fix aluminium window with double side hungshutter forglazing and gauging and frame with one or more rebates made out of anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminiumbeading screws, type B20 100mm long suitable handle, 75mm long tower bolt and anodised aluminum fittings such asstay, 75mm long Butt hinges glazing with 5 mm thick tinted sheet glass fixed with Solar control film 25 micron reflective type (gareware sun control or equivalent) and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and as directed by the Engr-in-Charge.(Tint of glass shall be approved by GE)Note :- Aluminium grill fixed under aboveitem shall be measured and paid separately |
| 56 | Supply & fix 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and as directed by the Engr-in-Charge |
| 57 | All as per item No 56.00 above but 18mm thick plain PVC celuka ply complete all as specified and as directed by the Engr-in-Charge |
| 58 | All as per item No 56.00 above but 12mm thick plain PVC celuka ply complete all as specified and as directed by the Engr-in-Charge |
| 59 | All as per item No 56.00 above but 05 mm thick plain PVC celuka ply complete all as specified and as directed by the Engr-in-Charge |
| 60 | Supply & fix PVC coated basket for kitchen drawers of required size and including sliding channels complete all as specified and as directed by the Engr-in-Charge |
| 61 | Supply & fix 100mm size extruded, brass handle fabricated type polished complete all as specified and as directed by the Engr-in-Charge |
| 62 | Supply & fix75mm size butt hinges,cast brass with mild steel hinge pin bright polishedcomplete all as specified and as directed by the Engr-in-Charge |
| 63 | Material & labour for pre-cast cement concrete type B1,1:2:4 (using 20mm graded stone aggregate )block masonry with solid blocks,exc 10 cm in width and setting in mortar complete all as specified and as directed by the Engr-in-Charge |
| 64 | Taking down cement plaster of any description in patch work including racking out joints, hacking for key and disposing of debris out sideMD land including 10m height steel scaffolding complete all as specified and as directed by the Engr-in-Charge |
| 65 | Material & labour for 10 mm thick rendering in CM 1:6 onconcrete surfaces / fair faces of brick masonary wall, finishedeven and smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge |
| 66 | Material & labour for applying two coats of oil bound distemper over a coat of primer on previously untreated surfaces of wall including preparation complete all as specified and as directed by the Engr-in-Charge |
| 67 | Material & labour for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement including 10m height steel scaffoldingcomplete all as specified and as directed by the Engr-in-Charge.[Note:- WPCshall be measured and paid separately ] |
| 68 | Supply of integral water proofing compound complete all as specified and as directed by the Engr-in-Charge |
| 69 | Material & labour for preparing new plaster surfaces of walls applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including 18m height steel scaffolding complete all as specified and as directed by the Engr-in-Charge |
| 70 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engr-in-Charge |
| 71 | Material & labour for screed bed or bedding layer or mortar 15mm layerfor laying floor finishes in CM 1:6 complete all as specified and as directed by the Engr-in-Charge |
| 72 | Material & labour for light shade vitrified Ceramic tiles lightshade 8 to10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engr-in-Charge |
| 73 | Material & labour for light shade vetrified ceramic tiles 8 to10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in skirtingetcset and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engr-in-Charge |
| 74 | Material & labour for rendering 10mm thick in CM 1:3 as backing coat on wall surface incl preparation of surfacesto receive dado finishedcomplete all as specified and as directed by the Engr-in-Charge |
| 75 | Material & labour for 450x300 x 7mm thick glazed coloured ceramic wall tiles/ digital tilesas in vertical surfaceand jointed in neat cement slurry and pointed in white or coloured cement to match pattern complete all as specified and as directed by the Engr-in-Charge |
| 76 | Material & labour for non - skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match complete all as specified and as directed by the Engr-in-Charge |
| 77 | Material & labour for granite (of any type)20 mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing on floor & Kitchen platform etc complete all as specified and as directed by the Engr-in-Charge |
| 78 | Material & labour for machine cut cudappah stone slab 20 to 25 mm thick over cement screed bed , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and pointing complete all as specified and as directed by the Engr-in-Charge |
| 79 | Material & labour for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations complete all as specified and as directed by the Engr-in-Charge |
| 80 | Material & labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc complete all as specified and as directed by the Engr-in-Charge |
| 81 | Material & labour for in repairs stainless steel \"L\" shape soft closing spring hinges for cabinets shutters ISI marked complete all as specified and as directed by the Engr-in-Charge |
| 82 | Material & labour for in repairs GI push and pull channel brand of size 20\"(51 CM) length for modular cabibets complete all as specified and as directed by the Engr-in-Charge |
| 83 | Material & labour for preparation of old plastered or unplastered washing, rubbing down and stopping of distemper and painted surfaces of walls and applying one coat of distemper oil emulsion over primer ( as approved by GE) complete all as specified and directed. After perodical serviceof the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows and should clean the floor , dado and all scraped material shall thrown awaycomplete all as specified and as directed by the Engr-in-Charge |
| 84 | Material & labour for preparation of oldplastered or unplastered washing, rubbing down and stopping of distemper anf painted surfaces of Ceiling and applying one coat of white washcomplete all as specified and directed. After perodical serviceof the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows and should clean the floor , dado and all scraped material shall thrown away complete all as specified and as directed by the Engr-in-Charge |
