|
| 1 | Dismantling of single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed. |
| 2 | Dismantling battens for tiles of any size including tilting fillets spaced exc 15cm complete all as specified and directed. |
| 3 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 4 | M&L for roof tiles, Manglore pattern, interlocking at side joints laid dry at any height including scaffolding etc complete all as specified and directed. |
| 5 | All as per item No 4.00 but except tiles complete all as specified and directed. |
| 6 | M&L for ridge or hip tiles to suit Manglore pattern of roofing tile, bedded and jointed in cement mortor 1:6 at any height including scaffolding etc complete all as specified and directed. |
| 7 | All as per item No 6.00 but except tiles complete all as specified and directed. |
| 8 | S&F second class hardwood battens at 30 cm centres of sectional area 15 sq cm and n exc 25 sq cm complete all as specified and directed. |
| 9 | S&F 0.63 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, bent to a curve,fixed with L-type or J-type or cranked hook bolts and washers, ISI marked in roofs etc at any height including scaffolding etc., complete all as specified and as directed. |
| 10 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 11 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 13 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 14 | S&F MS steel flat iron as in wind tie for roof sheet including securing bolts (Fe-290 E-165) complete all as specified and directed. |
| 15 | Dismantlingof wall & ceiling Boards ( fibre,pulp,insulation etc. ),or insulation board/slabs/ blankets, any thickness, including cover fillets complete all as specified anddirected. |
| 16 | S&F powder coated aluminium snap grid frame work for false ceiling with aluminium angle 25 mm x 25 mm x 1.5 mmfixed to perimeter of wall, main \"T\" runner 38 mm x 25 mm x 1.5 mm and secondary/cross \"T\" runner 25 mm x 25 mm x 1.5 mm to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia GI hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40 x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia , 40 mm long and 4 mm thick Non asbestos fibre board (E-board or V board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws complete all as specified anddirected. |
| 17 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc as in cement mortar complete all as specified and directed. |
| 18 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 19 | M&L Virified Ceramic tiles 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matc including screed bed of 15mm thick in CM 1:6 complete all as specified and directed. |
| 20 | M&L Vitrified ceramic tiles 8 mm thick in dado/skirting etc set and jointed in neat cement slurry and pointed in white cement to match with pigment including backing coat 10mm thick in CM 1:4 complete all as specified and directed. |
| 21 | S&F joints free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 22 | S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but notexceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 23 | S&F Glazed ceramic tiles (450x300)x 8-10 mm thick, in dado/skirtingset and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 24 | M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 25 | M&L for Kota stone slab 20-25mm thickin riser steps, skirting or dadao and pillar laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 26 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4 rates including moulding and rounding complete all as specified and directed. |
| 27 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 28 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 29 | Demolition of cement concrete (un-reinforced)in roof/floors other than ground level beam, stair case, landing, chajjas and similar items includingwater proofing treatment in any layersand removal of debris to distance exceeding 250m and not exceeding 500m from the site complete all as specified and directed. |
| 30 | M&L forPCC 1:2:4 (Type B1 using 20 mm graded aggregate) levelling course average thick 25 mm,to match the undulations of roof complete all as specified and directed. |
| 31 | M&L for rendering 10 mm thickon fair faces of concrete surfacein cement mortar 1:3 for receive the roof finishes with water proofing liquid. (WPL Shall be measured and paid separately) complete all as specified and directed. |
| 32 | M&L for fillet of 75mm size using PCC 1:2:4 type B-1 (using 20 mm graded aggregate) at the junction of all horizontal and vertical surfaces complete all as specified and directed. |
| 33 | M&L for APP based polymeric membrane minimum weighing 3.50 kg/Sqm and minimum 3mmthick reinforced with polyster non wovenfabric (wt not less than 160 gm/sqm) laidoverprimed surface including bituminous primer conforming to IS-3384-1965 applied @ 0.3 ltr/ Sqm by forced application complete all as speficied.Three course roof treatment consists of as under :-(i) Applying one coat of bituminous primer conforming to IS-3384-1965@ 0.30 ltr/Sqm.(ii) laying APP based membrane as specififed.(iii) Applying a layer of blown gradebitumen85/25 @ 1.2 Kg/Sqm conforming to IS : 702 |
| 34 | M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( wt not less than 150 gms /sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by forced complete all as specified and directed. Four course roof treatment consists of as under :- (a) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm.(b) Laying of APP based membrane as specified thickness and weight.(c)Applying two coat of aluminium paint @ 100ml/sqm. |
| 35 | M&L forCement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed including provision of 15 mm thick screed bed in CM 1:4 with using water proofing joints shall be filled with grey cement and no pigments compound complete all as specified and directed. |
| 36 | Taking down chowkhat n exc 1.5 sqm each without taking of shutter from frame complete all as specified and directed. |
| 37 | Taking down chowkhatexc 1.5 sqm and n exc 4.00 sqm each without taking of shutter from framecomplete all as specified and directed. |
| 38 | Taking down Shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed. |
| 39 | Taking down Shutters of any description exc 2 sqm each complete all as specified and directed. |
| 40 | Resecuring or easing and adjusting without taking down Shutters of any description exc 1 sqmbut not exc 2 sqm each complete all as specified and directed. |
| 41 | Resecuring or easing and adjusting without taking down Shutters of any description exc 2 sqm each complete all as specified and directed. |
| 42 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 43 | S&F powder coated aluminium ventilator shutters, partly fixed and partly louvered type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. |
| 44 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 45 | S & F powder coated Aluminium sliding windows three track with two glass shutters using 4 mm thick glass tinted and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, Alumini cleat, PVC track, bearing, handle lock rubber beading, etc complete.NoteSize of aluminum sections are as under :-(i) Shutter vertical section - Jindal main – 2010 Section No 20606.(ii) Shutter top & bottom - Jindal main – 2010 Section No 20604(iii) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.Note : 4 mm thick tinted glass and wire cloth shall be measured and paid separately. |
| 46 | S&F 4 mm thick tinted sheet glass, with necessary clip or clamp, screws etc in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 47 | S&F 105X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified andas directed. |
| 48 | S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified andas directed. |
| 49 | M&L for plain cement concrete Type C1, 1:3:6 ( using 20 mm graded aggregate) for filling of hollowpressed steel frame complete all as specified and directed. |
| 50 | S & F 25 x 3mmF1 hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed. |
| 51 | M&L for plain cement concrete Type B-0 1:2:4 (using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster (while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed. |
| 52 | S&F 35mm thick second class hardwood factory made flush shutters, solid, core construction with black board core and plywood face panals commercial type on both sides complete all as specified and directed. |
| 53 | S&F 35 mm thick second class hardwood factory made glazed and skelton shutters open rebated and prepared to receive glass gauge etc. wihoutsash bars sizes of the members of the shutters as specified in SSR Part-I section 8 , clause 8.24 (a) complete all as specified and directed. |
| 54 | S & FFactory made solidPVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube as specified & directed. |
| 55 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fittedin the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed. |
| 56 | S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing specified & directed. |
| 57 | S&F 18mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle framework as per specification & drawing complete all as specified and directed. |
| 58 | S&F 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 59 | S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 60 | S & F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 61 | S&F 150 mmlong aluminum anodized barred tower bolts of extruded section complete all as specified and directed. |
| 62 | S & F Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed. |
| 63 | S&F MS 300mm helical door springs including roller and roller plate complete all as specified and directed. |
| 64 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 65 | S&F in repair 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed |
| 66 | S&F in repair 150mm size extruded alluminium alloy handle fabricated type anodaised |
| 67 | S&F in repair 150mm size extruded brass handle fabricated type polished complete all as specified. |
| 68 | S&F in repair 300mm size Length alluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy. |
| 69 | S&F in repair 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified. |
| 70 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.etc., complete all as directed. |
| 71 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified |
| 72 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified. |
| 73 | Demolition of Concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and directed. |
| 74 | M&L for PCC 1:5:10, type E-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 75 | M&L 15 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement with using water proofing liquid complete all as specified and directed. (WPL shall be measured and paid separately) |
| 76 | Applying acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed. |
| 77 | Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 78 | Taking down cement plaster on brick/concrete/stone surfaces including racking out jointing hacking for key, scrubbing down with water etccomplete all as specified and directed. |
| 79 | M&L forold size bricks with fly ash bricks straight orcurved on plan exc. 6m mean radiusand setting in cement mortar 1:6 etc. complete all as specified as directed. |
| 80 | M&L 10 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 81 | M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 with using water proofing liquid finished surfaces even and smooth without using extra cement complete all as specified and directed. (WPL shall be measured and paid seperately). |
| 82 | Material & labour for 5 mm thick cement plaster on ceilingin cement mortar 1:3 finished even andsmooth without using extra cement complete in complete all as specified and directed. |
| 83 | Supply only liquid water proofing compound complete all as specified and directed. |
| 84 | M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 85 | Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 86 | Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 87 | S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed. |
| 88 | S&F 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed. |
| 89 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed. |
| 90 | Dismantling 500 ltrs capacity water tanks and removing to storeand S&F 500 ltrs capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 91 | Dismantling 1000 ltrs capacity water tanks and removing to storeand S&F 1000 ltrs capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 92 | Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 500 and n.exc 1000 ltr capacity tank.After cleaning write the date of cleaning with paint on tank complete all as specified and directed. |
| 93 | All as item No 92 above but exc 250 and n.exc 500 ltr capacity complete all as specified and directed. |
| 94 | S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 95 | S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for ironpipe complete all as specified and directed. |
| 96 | Demolition and breaking up 110/75 mm dia drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 97 | 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified. |
| 98 | S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls75mm bore complete all as specified and directed. |
| 99 | S&F 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed. |
| 100 | S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed. |
| 101 | S&F 75mm bore PVC (S.W.R) bend with access doorcomplete all as specified and directed. |
| 102 | S&F 110mm bore PVC vent cowl complete all as specified and directed. |
| 103 | S&F PVC floor trap 75 mm dia with CP gratings complete all as specified and directed. |
| 104 | S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed. |
| 105 | S&Fin repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed. |
| 106 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed. |
| 107 | S& F in repairs vitreous china water closet squatting pan\"orissa pattern, ivory coloured of size 580 x 440 mm,with integral foot rest and outlet for \"P\" or \"S\" trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed. |
| 108 | S&F in repair PVC valveless syphonic action type flushing cistern 10 ltrs capacity low lwvel, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified. |
| 109 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mmincluding brackets complete all as specified and directed. |
| 110 | S&F in repairs vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified. |
| 111 | S&F in repairs sinks made of stainless steel 1 mm thk kitchen with plugs, washers and wastes incl bedding in cement mortar on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size size 410mm X 330 mm X 160MM complete all as specified and directed. |
| 112 | S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc. complete all as specified and directed. |
| 113 | S&F in repairs tubular towel rail 20 mm dia \"D\" type 600mm long of stainless steel complete all a specified and diredted. |
| 114 | S&F in repairs 600 mmx450 mm looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC and fixed to wooden plugs with chromium plated brass screws and cup washersas directed by Engr in Charge. |
| 115 | S&F in repairs 15mm bore fancy type long neck chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed. |
| 116 | S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified |
| 117 | S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed. |
| 118 | S&F in repair 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed including all necessary fittings complete all as specified and directed. |
| 119 | Supply and fix 15 mm bore long neck CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 120 | Supply and fix in repair 15 mm bore long neck CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 121 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 122 | S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops , rollers etc complete all as specified and directed. |
| 123 | S&F repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 124 | S&F in repairs Seat cover ( colour - white ) for Vitreous China wash down water closet pan (pedestal pattern) all as specified and as directed. |
| 125 | S&Fin repair 15 mm dia CPhealth faucets including all neceesary fittings specifictions all as specified and directed. |
| 126 | S & F in repair PVC waste pipe 32 /40 mm dia x 600 mm long complete all as specified and directed. |
| 127 | S&F in repairs 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 128 | S&F in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 129 | Supply and fixin repairs 20mm bore ball brass valve, high pressure with polythene float and flynut complete, scrwed for iron pipe or brass ferrule fixed in repair complete all as specified and as directed. |
| 130 | Demolition of cement concrete (un reinforced) in ground floor and pavings n.exc 15cm thickness (below or above GL) complete all as specified and directed. |
| 131 | M&L for PCC 1:4:8 type D2, 75mm thick using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 132 | M&L for PCC 1:2:4 type B1, 100mm thick using 20mm graded aggregate and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 133 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 134 | M&L 60 mm thick glossy finish machine pressed precast concrete interlocking paver blockwith grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 gradecomplete all as specified and directed. |
| 135 | M&L 80 mm thick factory made rubber made glossy finish machine pressed precast concrete interlocking paver blockwith grey cement and pigment any shape and size confirming to IS 15658-2006 of M-40 gradecomplete all as specified and directed. |
| 136 | M&L glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 137 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (40mm graded aggregate) finishing the surface even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 138 | Material & labour for preparation of new plasteredsurfaces of celling and applying three coat of white lime wash complete all as specified and directed. |
| 139 | M&L preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or girth complete all as specified and directed. |
| 140 | M&L for preparation of new or previously un treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of priming complete all as specified and directed. |
| 141 | M&L for preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over a coat of primer and avg 2 mm thick wall care putty complete all as specified and directed. |
| 142 | M&L for prepraring newly plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed. |
| 143 | Preparation of old surfaces of plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed. |
| 144 | Complete removal of existing treatment of wall surfaces of brick or concrete suraces, pillars, cornices and similarand applying two coats distmper oil emulsion over a coat of primer and avg 2 mm thick wall care putty at any height including necessary scaffolding complete all as specified and directed. |
| 145 | Complete removal of existing treatment over wall surces of brick or concrete, pillar, cornices etc at any height including necessary scaffolding etc and applying twoalkali & fungal resistance, dirt resistance exterior emulsion weather coat paint of required shade over and including priming coat of exterior primer complete all as specified and as directed. |
| 146 | M&L including preparing surfaces of old steel surfacesof any description not otherwise described over 10 cm width or girth and applying, one coat of synthetic enamel paint complete all as specified and directed. |
| 147 | M&L including preparing surfaces of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 148 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided forcomplete all as sepecified and directed. |
| 149 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 150 | M&L for cement concrete 1:4:8, type D2 using 40mm graded stone aggregateinfoundations, filling and mass concrete complete all as specified and directed. |
| 151 | M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter rough finished surfaces of concrete complete all as specified and directed. |
| 152 | M&L for RCC nominal mix 1:2:4 (20 mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams bases for column etc basement slabs under reamed piles and mass concrete complete all as specified and directed. |
| 153 | M&L for form work to sides of pillars, posts, struts, piers, columns and stanchians to roughfinished surfaces of concrete complete all as specified and directed. |
| 154 | M&L for RCC nominal mix 1:2:4 (20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 155 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete completed all as specified and directed. |
| 156 | M&L RCC 1:2:4 nominal mix (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 157 | M&L TMT bars 10 mm dia and over cut to length, bent to shape required incliding cranking, bending spirally for hooking ends and binding with and including mild steel (annealed) wire not less than 0.90 mm dia complete all as specified and directed. |
| 158 | All as per above item above but 8 mm dia and above upto 10 mm dia as in stirrups, spacers and binders complete all as specified and directed. |
| 159 | S&F in repair hollow type 8 mm thick PVC decorative wall panelling of 250 mm width and height as per requirement and of wood grain printed PVC sheet at one side and plain colour PVC sheet at back sice including necessary and necessary covered channel complete all as specified and directed. |
| 160 | S&F 4 mm thick PVC tiles/ sheets,wood type laminated coloured, marbled mosaic or mottledfinish, laidwithapprovedrubber basedadhesive in floors including necessary foam etc complete all as specified and directed. |
| 161 | Schedule of credit amount of Rs 3,82,946.25 to be deducted during AOC |
