|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.i) Group B |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.i) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.ii) 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 5 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.iv) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 6 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recesincluding cutting the wall and making good the same in case of recessed conduit as required.i) 20 mm |
| 7 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc. as required. i) TV antenna socket outlet |
| 8 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 9 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 10 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 11 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required (Make- Anchor Modular or similar make of the manufacturer having their service centre in Jammu.) |
| 12 | Providing and installaion of 24 W LED 6500K Decorative ultra slimaluminium LED lighting fixture with high lumen output, environmental friendlyenergy efficient ready to use packcomplete with all accessories and tube/lamp etc directly on ceiling/ wall, including connections earthing etc.as required.. (Make like: Havells HIGH WATTAGE (ALUMINIUM BATTENS) Code- LHEXACP7IN1S024 or similar make of the manufacturer having their service centre in Jammu) |
| 13 | Providing and installaion of 10 W LED tube Light 2 FT, 3000KLED lighting fixture with extruded polycarbonate, environmental friendlyenergy efficient ready to use pack directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required( make like: Havells -LHEXACP5IN1W010 E-Lite LED Pride Plus Neo or similar make of the manufacturer having their service centre in Jammu) |
| 14 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required |
| 15 | Supplying and installation of1 phase Heavy duty exhaust fan of 300 mm sweep, min 1400 rpm, air delivery min 1950 Cubic meter /hour, double ball bearing Rough proof body and blade,in the existing opening, including making good the damage, connection, testing, commissioning i/c nut bolt supporting clamp, connecting wire etc as required (Make Havells -TURBOFORCE SPor similar make of the manufacturer having their service centre in Jammu) |
| 16 | Supplying and fixing louvers, Shutters complete with frame for exhaust fan of 300 mm sweep etc. as required. |
| 17 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.(make like havells -Efficiencia Neoin metallic white color or similar make like Cromptom/ Orient/ Usha |
| 18 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (make like :Havells or similar make of the manufacturer having their service centre in Jammu.)ii) 12 way, Double door |
| 19 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i)Single pole (make like :Havells or similar make of the manufacturer having their service centre in Jammu.) |
| 20 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. ii) Double pole 32 Amp (make like :Havells or similar make of the manufacturer having their service centre in Jammu.) |
| 21 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. iii) Triple Pole and Neutral 32 Amp (make like :Havells or similar make of the manufacturer having their service centre in Jammu.) |
| 22 | Earthing with GI earth earth pipe 4.5 mtr long, 40 mm dia including accessories and providing masonry enclousure with cover plate having locking arrangement and watering pipe etc with charcoal coke and salt etc as required |
| 23 | Providing and fixing 25 x 5 mm GI strip on surface or in recess for connection etc as required. |
| 24 | Supplying and fixing Bus-Bar chamber with 32 Amps, 415 volts,4 way 4 nos.copper bus bars , Complete with connections, earthing the body etc. as required. AnchorMake Item Code 98377 or other equivalent Havells, Crompton, Phillips, Legrand. |
