|
| 1 | SCHEDULE -A |
| 2 | Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. a) All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.8mm thick (mirror polished and machine cut edge) |
| 5 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 7 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 9 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. A)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 10 | Disposal of building rubbish / malba / similar unserviceable, dismantledor waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or asapproved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 11 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 4 mm thick ACP sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D- 4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in- charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage |
| 12 | add Correction Factor @0.973 |
| 13 | Schedule – B |
| 14 | Providing &Installing the Mini Play House of make ARIHANT /KOMPAN/ LANDSCAPE STRUCTURES /OK PLAY/LEO/ KAALIA or equivalent brand as approved by Engineer-in -Charge of size 6.0 x 1.80 mtr to 7.0x2.8 mtr with Slide. Main Frame made of Round 80 NB Pipe Having min \"B\" class G.I. pipe. All the pipes should be ISI Marked (as per the IS 1239/2004) & of reputed brand. Ensuring the strength, durability, stability & long life to the kids structure with safety as paramount. Deck: having 1035mm x 750mm with collar of 65mm size made of perforated sheet. Hydraulic Precision punched holes made of min 10mm NB with sheet thickness of approx. 2.5mm. Components: FRP (Fiber Reinforced Plastic) Main Sunshine Line designer Roof having min 2-4 layers (approx 4mm thickness) with bright colours being UV resistant ladder main frame made of round pipe 25mm NB pipe & Ladder rungs made of 15mm N.B. pipe having width of 400mm x 70mm(approx.). All the pipes should be ISI marked (as per the IS1239/2004) & of reputed brand. Tree climber: made of main frame pipe of 25mm NB round pipe & rungs made of 20mm NB round pipe. All the pipes should be ISI marked(as per the IS 1239/2004) & of reputed brand. Spring coil climber: made of main frame pipe of 25mm NB round pipe & springs made of 20mm NB round pipe. All the pipes should be ISI marked(as per the IS 1239/2004) & of reputed brand. A Rotomolded plastic LLDPE made Line panel with UV stabilized color fading resistant. Having size of 1035mm x 750mm & thickness of 70mm heavy & strong for long term durability & great aesthetic look & finish, Safety panel fitted on M.S round pipe 20mm N.B. with size of 1035mm(L)x750mm(W) having wall thickness 70mm. Slide having height of 1220mm approx & length approx 2mtr made of metallic GI sheet of high strength having width of 400mm mounted on M.S angle support of 40x40x4mm & 5nos angle supports & 20mm N.B. round pipe hand rail. The ladder step of metallic slide should be made of MS rectangular pipe of 70x23mm in minimum thickness of 2mm with vertical hand rail support of size 20mm N.B. GI pipe with other necessary supporting pipes. The complete structure mini play house should be powder coated with minimum powder coating thickness of 60-80 microns. Safety panel/top canopy should be also attached with help of colorful nylon clamps.Accessories: Nut bolts-All approved GI nut bolts of Galvanised Iron with High tensile Strength. Kid capacity 2-8 Nos. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year. |
| 15 | Providing and fixing of TODDLER SWING make ARIHANT KOMPAN/LANDSCAPE STRUCTURE/OK PLAY/LEO/KAALIA. In the Toddler swing the center support is made up of 80 NB GI pipes. The horizontal bar s are made up of 50 NB powder coated G I pipes. The bucket seats of the toddler swing are made of rubber with anti-skid. The ball bearings are mounted inside specially designed nylon balls. The rubber seat is affixed on 6 mm. thick GI chain. The seats are made with full care so that the child does not fall from it while swinging. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 ce ment :2 coarse sand: 4 graded stone aggre gate 20mm nominal size) of required size as per department/ manufacturers specif ications and guidelin es including mainten ance cost for 1st Year. |
| 16 | Providing and fixing Double Arch swing of make ARIHANT/ KOMPAN/LANDSCAPE STRUCTURE/OK PLAY/LEO/KAALIA. The arch shaped side frame of the double arch swing is made up of 80 NB GI pipe and top pipe is made up of 50 NB GI pipe. The frame is powder coated to give an esthetic look. Seats-Belt Type Seats made of Synthetic Rubberized material/Fiber reinforced fabric materials of Virgin Reinforced material. The belt seat is suspended on 6 mm rubber coated GIChain. The ball bearings are mounted inside a specially designed nylon clamp. All complete as per the direction of engineerIn charge or as per approved drawing & d esign given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department/manuf acturers specifications and guidelines including maintenance cost for 1st Year. |
| 17 | Providing & Installing the SINGLE WAVE CLIMBER of make ARIHANT /KOMPAN/ LANDSCAPE STRUCTURES /OK PLAY/LEO/ KAALIA or equivalent brand as approved by Engineer-in -Charge of size 1.75x0.80mtr. Main Frame: Main Frame of single wave climber pipe made of round 32mm NB pipe (Must be min GI \"B\" class pipe) and rungs made of 20mm N.B. Pipe- \"U\" Shaped bended (with thickness approx. min 1.5mm 2.2.mm only), All the pipes should be ISI marked (as per the IS 1239/2004) & of reputed brand & Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. The complete structure single wave climber should be powder coated with miņimum powder coating thickness of 60-80 microns. Accessories: Nut bolts- All approved GI nut bolts Galvanised Iron with High tensile Strength. Kid Capacity-2 to 4 Nos. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year. |
| 18 | Providing&Installing the SEA SAW DOUBLE of make ARIHANT /KOMPAN/ LANDSCAPE STRUCTURES /OK PLAY/LEO/ KAALIA or equivalent brand as approved by Engineer-in -Charge of size 2.0x2.50mtr.Main Frame: made of see saw made of 50mm NB pipe with planks made of 40mm NB pipe and supports made of 20mm N.B. pipe, all the G.I. pipes should be \"B\" class & ISI marked (as per the IS 1239/2004) & of reputed brand make & Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. Seats-Seat Made of FRP (Fibre Reinforced Plastic), duly UV resistant colors, all chemicals in the FRP material should be of best quality, the Fibre Mat of 450GSM to be used for strength & stability with supporting frame. FRP Seat size(approx.) 10\"(L) x 8\" (W) with back rest. The complete structure see saw double should be powder coated with minimum powder coating thickness of 60-80 microns. Accessories: Nut bolts- All approved GI nut bolts Galvanised Iron with High tensile Strength. Kid capacity -4 nos.Complete as per drawings attached. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year. |
| 19 | Providing and fixing of Horizontal shaft of swing of appropriate/required length all complete as per direction of Engineer-in-charge. |
| 20 | Providing and fixing M.S chain of appropriate/required length of thickness 6 mm having rubber coating with SS hooks all complete as per direction of Engineer-In-Charge. |
| 21 | Providing and fixing of toddler swing bucket with SS hooks with required fittings, specifications etc.all complete as per direction of Engineer-in-charge. |
| 22 | Providing and fixing of G.I see saw plank without seats with requiredfittings, specifications etc. all complete as per direction of Engineer-in-charge |
| 23 | Providing and fixing of rubber seat belt with SS hook with required fittings, specifications etc.all complete as per direction of Engineer-in-charge |
| 24 | Providing and fixing of Metal slide G.I. Chute part, complete with required fittings, specifications etc.all complete as per direction of Engineer-in-charge |
| 25 | Providing and fixing of bush bearing assembly/nylon clamps with required fittings, specifications etc.all complete as per direction of Engineer-in-charge |
| 26 | Providing and fixing of GI platformwith required fittings, specifications etc.all complete as per direction of Engineer-in-charge |
| 27 | Providing and fixing of Roto see saw seatswith required fittings, specifications etc.all complete as per direction of Engineer-in-charge. |
| 28 | Deductfor Old unserviceable/Scrap of equipments, taken back from various sites after removing/ Demolishing i/c labour & freight charges. |
| 29 | Removing of old/ existing unserviceable play equipment. |
| 30 | Maintenance of children play equipments for 3yrs |
| 31 | Terms and Conditions:1. The agency shall regularly inspect & upkeep the equipment in working condition as required.2. Any complaint, as and when it reported, shall be attended to within 3 days, during 03 years maintenance period, failing which a penalty of @ Rs. 2000 per day shall be imposed and recovered from the agency.3. In case the equipment or its parts are stolen during the execution to negligence in maintenance by the agency, the agency shall replace the stolen equipment/parts at its own cost. No payment shall be made for such replacement.4. The performance guarantee of 5% submitted by the agency shall be released only after recording of final completion certificate, i.e. after successful completion of the full 3-year maintenance period.5. The provisional completion shall be recorded by the competent authority separately for: • Replacement & Refurbishment of equipment. • Maintenance of refurbished equipment.However, the final completion certificate shall be recorded by the competent authority after successful completion of the full 3-year maintenance period.6. The security deposit @2.5% of the gross amount of each Running Account (R/A) bill and final bill, deducted until it amounts to security deposit of 2.5% of the tendered amount, shall be released after recording of final completion certificate. (i.e. after successful completion of 3-year maintenance period).7. An amount equal to 50% cost of replaced equipment shall be withheld from each R/A bill, in addition to the security deposit towards warranty. This withheld amount shall be released proportionately, year wise after successful completion of each year of the 3-year maintenance period (including both the free and paid maintenance periods) as mentioned in the table provided below:First Year 10%Second Year 10%Third Year 10%8. The rate Fixation (Purchasing and buy back) are provided in Annexure “A” and are to be complied in for works involving rate fixation, supply, replacement, refurbishment and maintenance of the open gym equipment. |
