|
| 1 | Dismentling of Various concrete / R..C.C Works, Plain Cement concrete , Brick Work etc. Including the disposal of Mulba complete . |
| 2 | Providing and laying in position cement concrete (1:4:8) excluding the cost of centering and shuttering , all works upto plinth level with crushed stone aggregate. |
| 3 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand). |
| 4 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 5 | Providing and applying white cement based putty approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. |
| 7 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 8 | Finishing walls with exterior emulsion paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 9 | Finishing walls with exterior emulsion paint of required shade: Old work (one or more coats applied @ 0.90 liters/ 10sqm) |
| 10 | P/F ward robes by using 19mm thick for frame work and internal 12 mm thick HDMR Board of approved brand and manufacture,over board first quality mica of standard quality and various adhesives all items including aluminium handle,tower bolt,aluminium sliding bolt,hinges and lock of hetich or similar quality.complete fittings incl lead ,lifts,carraiges etc.as per the direction of engineer in charge. |
| 11 | Providing and fixing 35 mm thick wire gauge shutters using galvanised MS wire gauge for doors, windows, clerestory windows with hinges and necessary screws with second class deodar Wood. |
| 12 | Providing & fixing glazed shutters for doors , windows and clerestory windows using 10 Kg / Sqm. (4 mm thick) float glass panes , incl. ISI marked M.S pressed butt hinges bright finished off required size with necessary screws 35 mm thick of second class deodar wood. |
| 13 | Providing and fixing panelled shutters for doors, windows, clerestory windows, including hinges and necessary screws including panelling which will be paid for seperately, all complete with 2nd class Kail wood. |
| 14 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm). |
| 15 | P/f panelling in panelled shutters with Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked |
| 16 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm |
| 17 | Providing and fixing Aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868 ) tranparent or dyed to required colour or shade with nuts and screws etc. complete |
| 18 | 100x10mm |
| 19 | 200x10 |
| 20 | Providing and fixing Aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868 ) tranparent or dyed to required colour or shade with nuts and screws etc. complete twin rubber stopper |
| 21 | Providing and fixing Aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868 ) tranparent or dyed to required colour or shade with nuts and screws etc. complete |
| 22 | 125mm |
| 23 | 100mm |
| 24 | Providing / fixing powder coated aluminium (Min. 16 Gauge) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C. P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge (including glazing and paneling)for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required including all fittings glazing all complete job. |
| 25 | Applying primming coat of approved brand and manufacture on wood work. |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.two or more coats. |
| 27 | New Work(A)qty vide item no.22 |
| 28 | Old Work(B) |
| 29 | Providing and placing on terrace ( at all floor levels) polyethlene water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank ( sintex , electroplast , star , lotus or equivalent having valid ISI license.(three layer) |
| 30 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all costs of material and carriage complete. (300x450) |
| 31 | Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. including all costs of material and carriage complete. |
| 32 | P/F gang saw cut,mirrror polished ,premoulded and prepolished ,machine cut for kitchen platforms,vanity counters ,window sills,facia and similar locations of reqd.size approved shade colour abd texture laid over 20 mm thick base cement mortar 1:4 joints treated with white cement ,mixed with matching pigment,epoxy touch ups,including rubbing,curing moulding and polishing toedges to give high gloss finish etc.complete at all levels granite of any colour or shade. |
| 33 | P/ laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. including all carriages and costs of material involved. (2’x2’ or above) Kajaria, Thomson or equivalent) |
| 34 | Providing and fixing PVC Fittings/ fixtures. |
| 35 | Pipe 100mm dia |
| 36 | bend (100mm) |
| 37 | Providing and fixing ball valve(20mm) |
| 38 | f- trap |
| 39 | P/F CPVC fittings and fixtures |
| 40 | 20 mm internal |
| 41 | 25 mm external |
| 42 | Providing and fixing water closet ( English type )complete one piece including all fittings and fixtures of approved make. |
| 43 | Providing and fixing wash wasin with pedestal with C.I /M.S brackets 15mm C.p Brass pillar taps ,32mm C.P brass waste of standard pattern including painting of fittings and brackets ,cutting and making good the walls where ever required flat back white vitreous china wash basin size 630x450 mm with a pair of 15 mm C.P brass pillar taps. |
| 44 | Providing and Fixing Towel Rod |
| 45 | Providing and Fixing C.P Bib cock Long Nose |
| 46 | Providing and Fixing C.P Bib cock short Nose |
| 47 | Providing and Fixing C.P grating |
| 48 | Providing and Fixing Soap Case |
| 49 | Providing and fixing Looking Mirrior |
| 50 | Providing and fixing angle valve |
| 51 | Providing and fixing PVC Connection pipes |
| 52 | P/F waste pipe |
| 53 | P/F SS Kitchen sink |
| 54 | P/F jet |
| 55 | P/F Health faucket |
| 56 | P/F Shower and rod complete set |
| 57 | P/F Wall mixer |
| 58 | Labour enganged for Various minor works Emergent nature required at site |
| 59 | Mason |
| 60 | Labour |
| 61 | Plumber |
| 62 | Carpenter |
| 63 | Welder |
| 64 | Heir Charges of Welding set including welding rod Complete. |
| 65 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fasteners shall be paid for seperately) sal wood. |
| 66 | Providing and laying water proofing treatment to vertical surfaces of depressed portions of W.C kitchen and like consisting of (1) 1st course of applying cement slurry 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended portions including rounding off junction of vertical and horizontal surfaces .(2) course of 20 mm cement plaster 1:3 mixed with water proofing compound in recommended proportion including of vertical and horizontal surface.(3) course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area .(4) course of 400 micron thick pvc sheet (overlaps at joint of pvc sheet should be 100 mm wide and pasted to each other with bitumen @1.7 kg/sqm ). |
| 67 | Providing and repair of man holes and including CI Cover with frame all .(1x1) |
| 68 | Providing and laying Protective Layer to water proofing with Cement concrete 50 mm thick in 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) properly finished in proper Grade/ Slope for proper drainaqge of rain water, including cost of waterproofing compound (Tapecrete or equivalent )mixed with concrete @50 ml per bag of cement with 10mm nominal size stone aggregate (Crushed).Including all leads , lifts, costs and carriages of all materials involved complete. |
| 69 | providing and fixing of pvc wall panelling including the cost of nails and screws and all carraiges and cost of materials involved complete.(standard make and approved by the EIC at site) |
| 70 | P/F chromium plate brass curtain rod having wall thickness of 1.25 mm with two chromium plate brass screws and pvc sleeves etc.wherever necessary complete 20 mm dia. |
| 71 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishingthe top smooth and curing complete |
| 72 | Disposal of surplus excavated earth from municipal limits upto 5.0 km |
| 73 | Providing edge moulding to 18 mm /16 mm thick marble stone counters,vanities etc.including machine polishing to edge to give highgloss finish etc.complete |
| 74 | Providing and laying 1:2:4 Cement concrete flooring of neat cement slury . 50 mm thick incl cost of material and carriage complete |
| 75 | carraige of materials from source to site by MT. |
| 76 | sand av. Lead 45.0 km |
| 77 | coarse aggregates av. Lead 3.0 km |
| 78 | Wiring for light point / ceiling fan point/exhaust fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit/ channel, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 79 | Providing Installation testing and commissioning of Ceiling Fans of approved brands with connections etc as required |
| 80 | Supplying and fixing two module Stepped type electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 81 | Supply,installation,testing and commissioning of Ceiling LED Surface Light 12 watt day milky fitting with connections as required |
| 82 | Supply & Installation of Exhaust Fans With Stylish Plastic Exhaust 200 mm(8\") in the existing opening including connections,testing commissioning etc as required |
| 83 | Supply & Installation of Bulk Head Lights including connections,testing commissioning etc as required |
| 84 | Supply and fixing of Ceiling rose on the existing junction box/wooden box including connections as required |
| 85 | Supply and fixing Modular Blanking Plate on the existing modular plate and switch box excluding modular plate as required |
| 86 | Supplying laying & making outdoor connections including lugs and other jointing materials for 16 sqmm 2 Core armoured copper cable |
| 87 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator |
| 88 | 16 way, Double door |
| 89 | Supply & Fixing following size DP MCB |
| 90 | 63 Amps DP |
| 91 | 40 amps DP Make:- Anchor/havells or equi |
| 92 | Supply & Fixing following size DP MCB |
| 93 | 32 amps DP |
| 94 | Supplying and fixing of 5 amps to 32 amps rating 240/415 volts \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Approved Brand. |
| 95 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make :- /Anchor/finolex/polycab or Equivalent |
| 96 | 2x1.5 sq. mm |
| 97 | 2 x 2.5 Sqmm + 1 x 2.5 sqmm |
| 98 | 2 x 4 Sqmm + 1 x 4 sqmm |
| 99 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.& Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections for HEATING points etc. as required. |
| 100 | 3 Module (200mmX75mm) |
| 101 | 6 pin 15/16 A socket outlet & 15/16 A switch |
| 102 | Supplying and fixing following 5 pin 5/6 A modular switch /socket on the existing modular plate & swich box including connections etc. as reqd. |
| 103 | Supply and fixing Indicator on the existing modular plate and switch box excluding as required |
| 104 | Dismantelling of electrical items etc. and reinstallation/ handover-takeover of reusable material and disposal of unwanted Mulba/ material from the site of work including Cheselling & repairing whereever required |
| 105 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 106 | Chemical Earthing complete Please Enable Macros to View BoQ information |
