|
| 1 | Dismantling and removing RCC roof slab including stacking the useful materials for reuse and removing the debris within 50m lead |
| 2 | Foundation excavation in hard soil including levelling and dressing the bed and sides depositing muck within initial lead and lift |
| 3 | Filling foundation and plinth with sand well watered and rammed including cost,conveyance and royality of sand etc. complete as per direction of Engg-in-Charge . |
| 4 | Cement concrete 1:3:6 using 4cm. size HBG crusher broken metal including cost,conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 5 | R.C.C. work M-20 grade using 20mm.and down grade HBG crusher broken chips including hoisting,laying, cost,conveyance and royality of materials curing including centering and shuttering etc. complete. |
| 6 | Column base |
| 7 | Column & beam |
| 8 | Supplying,fitting and placing uncoated HYSD bar reinforcement as per drawing and technical specification including cost,conveyance and all taxes of steel and binding wire etc.complete |
| 9 | 6mm. thick cement plaster (1:4) to R.C.C. surfaces finished smooth including closed deep chipping and slury treatment, cost , conveyance and royality of materials curing etc. complete |
| 10 | Fitting and fixing of MS frame in trusses including the cost of fabrication and transportation |
| 11 | Supply fitting and fixing of 0.40mm GCI. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. including cost of fitting as per direction of Engineer-incharge. |
| 12 | Fixing industrial Chequred tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, poloshing complete excluding cost of tiles etc. complete as per direction of Engg-in-Charge . |
| 13 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame. shutters and all fitting and fixtures.as panel fitted with rubber bending including locking arrangement and all fittings including cost of materials, taxes labour, T&P complete. data for 1.49 sqm |
| 14 | Providing ,fitting and fixing of decorative flush door made up with 32 mm thick phenol bounded .BWR grade block board and subsiquently finished with 1 mm thick BWR grade decorative laminates of approved shade on both side ,fixed by synthetic adhesive and headless pins with all door accessory etc. complete as per direction of Engineer in charge.(With Mortice Luck) |
| 15 | Providing fitting and fixing at allheight flase ceilng of 12mm thick tapered edge gypsum board including providing and fixing of frame work made of from M.S sheet and galvanised in accordance with zinc coating 600 and consisting of angle cleats of sixe including fixing the gypsum board with ceiling sectional perimeter channels 0.5 mm thick 27mm high having flanges of 20mm and 30mm long. The primete of ceiling fixed to walkl/ partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive all screws 2230 mm interval including joinbting and fixing to a flush ficish of tapered and square edge of the gypsum board with recommended filler,paper tapes ficisher and two coats of primer suitable for gypsum board including the cost of painting.( No deduction have to made forlight opening.) complete in all respect as per directon in charge |
| 16 | Providing fitting fixing of decorative Gypsum cornice in all respect as per direction in charge. |
| 17 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials excluding GST, labour T&P etc complete. |
| 18 | Priming one coat to wall surface with water bound cement primer including cost, conveyance,excluding GST of all materials, labour and T&P etc. complete |
| 19 | Ground floor |
| 20 | Finishing inside walls with Distemper of approved shade on new work two coats to give an even shade including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 21 | Providing & fixing vertical roller blinds made up wih 0.60 mm thick woven fabrics coated synthetic matt of approved colour fitted properly at specified space with suitable standard power alluminium top channel etc complete. |
| 22 | Recssed wiring to light point & Exhaust fan point with 1.5 sqmm FR PVC Insulated single core multistandard copper conductor of ISI marked with 20mm dia non metalic PVC flexible conduit with 5A ,250V modular type switch of ISI marked & ceiling rose of ISI marked mounted on MS BOX having front back light cover of suitable size, MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire including all accessories and connection as per direction of Engineer in charge(make of wire=Finollex/L& T/Anchor/Havels/V-guard/Great white)(deducting the cost of S/F of 100mmx100mmx60mm M.S Box with Backlite cover-1no) Group-A(1.1.1.1-1.24.2) |
| 23 | S/F of 18 SWG following size of modular GI box along with accessories in recess wiring including cutting the wall and making board thesame in case of recess conduit as required(1.24) 2 module. |
| 24 | do.......12 Module |
| 25 | Wiring for circuit/sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked confirming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduct 1.6mm in recessed PVC conduit as required (Make of wire-Finolex/L & T /Anchor/Havels/V-guard) 2x1.5sqmm + 1x1.5sqmm(1.8.1) |
| 26 | do- 2x2.5sqmm +1x1.5sqmm(1.8.2) |
| 27 | do- 2x4 sqmm +1x1.5sqmm(1.8.3) |
| 28 | S/F of 10Watt LED Bulb ( Make -Crompton/ Havells/ HPL /Philips/Polycab) |
| 29 | Installation,testing and commissioning 18 w LED Light etc directly in ceiling / wall,including connection with 1.5 sqmm FR PVC insulated copper conductor and earthing as required as per direction of engineer in charge.( make of wire Finolex/ L & T /Anchor/Havels/V Guard. Please Enable Macros to View BoQ information |
