|
| 1 | Schedule \"A\" Part-I (B/R itmes) Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. ,complete all as specified and as directed. |
| 2 | Material and labour for rendering 05 mm thick on fair faces of brick work or concrete ceilingsurfaces, chajjas, etc. in cement mortar 1:3 andfinishedeven and smoothwithout using extra cement ,complete all as specified and as directed.. |
| 3 | Material and labour for rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement ,complete all as specified and as directed.. |
| 4 | Material and labour rendering 15 mm thick on brick work or concrete wall surfaces in cement mortar 1:4including mixing water proofing compound @ 2% by weight of cement or as per manufacturer\"s instruction and finished fair and even without using extra cement ,complete all as specified and as directed.. ( Note- WPC shall be measured & pad for separately) |
| 5 | Material and labour for rough cast plaster complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine stone aggregate of size between 6 to 12 mm as per the texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, ,complete all as specified and as directed.. |
| 6 | Supply only water proofing compound ,complete all as specified and as directed.. |
| 7 | Demolition of cement concrete (un–reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete, all as specified and as directed. |
| 8 | Roughening concrete surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.00kg of cement per sqm complete all as specified and directed. |
| 9 | Material and labour 75 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement, complete, all as specified and as directed. |
| 10 | Material and labour for vitrified ceramic coloured tiles light shade,1st quality,(square/ rectangular), 10mm thick, area of each tile exceeding 0.36 sqm andnot exc 1.00 sqm as in floor, set and jointed in neat cement slurry and pointed in colouredcement to match the surface over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6for laying floor finishes ,complete all as specified and as directed.. |
| 11 | Material and labour for vitrified ceramic double chargedtiles, 1st quality, of same description as of floor tiles in serial item No.10 above butas in skirting, set and jointed in neat cement slurry and pointed in colouredcement to match the surface over and including rendering 10 mm thick in cement mortar 1:4 ,complete all as specified and as directed.. |
| 12 | Material and labourfor preparation of new plastered/unplastered surfaces and applyingthree coats of white lime wash on surfaces of walls, chajjas, roof projection etc. ,complete all as specified and as directed.. |
| 13 | Material and labourcomplete removal of existing treatment on ceiling etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of white washing ,complete all as specified and as directed.. |
| 14 | Material and labour for preparation of old decorated brick/concrete, plastered /un-plastered surfaces of wall, pillar, cornices, etc. and applying two coat of white lime wash ,complete all as specified and as directed.. |
| 15 | Material and labourfor preparation of new plaster surface on walls and applying two coats of acrylic distemper over and incl applying 2mm thick wall care putty to achive smooth surface complete, all as specified and as directed. |
| 16 | Material and labourcomplete removal of existing treatment on walls, pillars, cornices etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of acrylic distemper over and incl applying 2mm thick wall care putty to achive smooth surface ,complete all as specified and as directed.. |
| 17 | Material and labourfor preparation of new plastered /concrete surface of wall applying of two coats of cement base paint over a coat of primer complete, all as specified and as directed. |
| 18 | Material and labour for preparation of old plastered surface ofwallsand wasing down with water to remove loose particles etc and applying two coats of cement base paint ,complete all as specified and as directed.. |
| 19 | Material and labour preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotsand applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior gradepaint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm,complete all as specified and as directed.. |
| 20 | Taking down shutters of any description area exc 1 sqm and not exc 2 sqm and refixing the same after easing, repairing etc in same opening complete, all as specified and as directed. |
| 21 | Material and labour for preparation of new woodensurfacesof any description, not otherwise described, over10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ,complete all as specified and as directed.. |
| 22 | Material and labour for preparation of old or previously treated woodensurfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint ,complete all as specified and as directed.. |
| 23 | Material and labour forpreparation of old or previously treated steelsurfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint ,complete all as specified and as directed.. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete, all as specified and as directed. |
| 25 | Demolition of cement concrete (un–reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) ,complete all as specified and as directed.. |
| 26 | Material and labour forNon Skid coloured ceramic tilesjoint free premium/1st quality 7 to 8 mm thick, (Square/rectangular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding15mm thick screed bed in CM 1:6 ,complete all as specified and as directed.. |
| 27 | Material and labour for glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/skirtings/dados of size 600x300 x7mmto 8mm thick, set and jointed in neat cement slurry and pointed in white or colouredcement mixed with pigmentto match over and including 10mm thick rendering onfaces of brick / concrete surfaces in cement mortar 1:4,complete all as specified and as directed.. |
| 28 | Supply and fixing as in repairvitreous china squatting pan, Orissa pattern,580 mm x 440 mm size, whitecolour with integral foot rest and PVC SWR \"P\" or\"S\" trap of pressure rating 6 Kg per square cm complete including provision of cement concrete bedding, connection to trap, outgoing flushing pipe, anti syphonage pipe, etc.,complete all as specified and as directed.. |
| 29 | Supply and fixing for vitreous china wash down water closet pan (pedestal pattern), white (including fixing bolts but excluding flushing cistern and flush pipe) including plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminium hinges deviceas in repair,complete all as specified and as directed.. |
| 30 | Supply and fixing in replacement10 litre PVC valveless syphonic action type flushing cistern with inlet ball valve float, handle, etc. with and including brackets, flush pipe, etc.and connections of flush pipes to WC,complete all as specified and as directed.. |
| 31 | Supply and fixing in replacement of 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers ,complete all as specified and as directed.. |
| 32 | Supply and fixing as in repair MS powder coated decorative curtain rod 25mm dia having wall thickness 1.00mm with and including decorative brackets, two lotto for each rod length at both end etc fixed with stainless steel screws, complete, all as specified and as directed. |
| 33 | Supply and fixing , water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting anddismantling of existing water tanks and removing from site all as specified in SSR Part–I , ,complete all as specified and as directed..Note : - The colour of tanks shall be white colour . |
| 34 | Supply and fixing as in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) but incl PVC waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and union for discharge pipe.(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete, all as specified and as directed. |
| 35 | Supply and fixing 15mm bore brass chromium plated urinal spreader, screwed down, complete, all as specified and as directed. |
| 36 | Supply and fixing sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromiun plated brackets guard and railing 60 cm long, ,complete all as specified and as directed.. |
| 37 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store ,complete all as specified and as directed.. |
| 38 | Material and labour galvanised iron tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete, all as specified and as directed. |
| 39 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store ,complete all as specified and as directed.. |
| 40 | Material and labour galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete, all as specified and as directed. |
| 41 | Cutting chases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing, steps, cills, sunshades, shelves, lintel etc. and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth ,complete all as specified and as directed.. |
| 42 | Supply and fixing as in repair 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure scrwed both ends for iron pipe or for unions, complete all as specified and as directed. |
| 43 | Supply and fixing20 mm bore Gun–metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair , complete, all as specified and as directed. |
| 44 | Supply and fixingbib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair, complete, all as specified and as directed. |
| 45 | Supply and fixingas in repair brass chromium plated shower rose 100mm size swivel type with arm of standard size as per site suitable for 15mm bore pipe, complete, all as specified and as direced. |
| 46 | Supply and fixingPVC connections 15 mm size with PTMT nuts of length 450 mm as in repair, complete, all as specified and as directed. |
| 47 | Supply and fixing 15mm bore cast copper alloy fancy type, chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions as in repair, complete, all as specified and as directed. |
| 48 | Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete, all as specified and as directed. |
| 49 | Material and labour 75mm bore PVC (SWR) floor trap with and including CP grating including jointing with solvent cement including fixed in cement concrete as in repair ,complete all as specified and as directed.. |
| 50 | Demolition and breaking up cast iron or reinforced concrete drain pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., (measured overall as fixed along the centre line over fittings and accessories), complete, all as specified and as directed. |
| 51 | Supply and fixing 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches including necessary excavation, returning filling and removal etc complete, all as specified and as directed. |
| 52 | Supply and fixing 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or ceiling etc, complete, all as specified and as directed. |
| 53 | Supply and fixing75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches including necessary excavation, returning filling and removal etc complete, all as specified and as directed. |
| 54 | Supply and fixing75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or ceiling etc, complete, all as specified and as directed. |
| 55 | Supply and fixing110mm bore PVC (SWR) bends of any radius, complete, all as specified and as directed. |
| 56 | Supply and fixing75mm bore PVC (SWR) bends of any radius, complete, all as specified and as directed. |
| 57 | Supply and fixing 110mm bore PVC (SWR) branch piece (single \"Y\") equal or unequal, complete, all as specified and as directed. |
| 58 | Supply and fixing 75mm bore PVC (SWR) branch piece (single Y) equal or unequal, complete, all as specified and as directed. |
| 59 | Supply and fixing 110mm bore PVC (SWR) junction single (Single \"T\") equal or unequal, complete, all as specified and as directed. |
| 60 | Supply and fixing 75mm bore PVC (SWR) junction (Single T) equal or unequal, complete, all as specified and as directed. |
| 61 | Supply and fixing 110mm bore PVC (SWR) vent cowl, complete, all as specified and as directed. |
| 62 | S&F for bands straps supports or stay for rain water ventilating pipe including bolt if required hook heavy for large gate hook and pintle hinges,large hasp and staple,clamps ,hold fast , wall tie , hook for hanging fan plain angle cleat for screwing purlin cleat complete, all as specified and as directed. |
| 63 | Cutting into existing manholes of any type for connecting new drains or pipes, and making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 150 mm dia, ,complete all as specified and as directed.. |
| 64 | Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete, all as specified and as directed. |
| 65 | Taking down shutters of any description area exceeding 01 sqm but not exc 2 sqm each and removing the same from site complete all as specified and as directed by the Engineer-in-Charge. |
| 66 | Material and labour for factory made 2nd class hard wood 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both face . The size of rail and style as per IS:1003 (Part-1) kiln seasoned and chemically pressure treated ,complete all as specified and as directed.. |
| 67 | Material and labour for factory made 35 mm thick 2nd class hard wood glazed and skeletonshutters,open rebated and prepared to receive glass , gauze etc. (without sash bars) ,edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, Section-8, clause 8.24 (a) (wood shall be kiln seasoned and chemically pressure treated) ,complete all as specified and as directed.. |
| 68 | Supply and fixing ofsolid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on single side used instead of plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with prelaminated sheet andfixed in opening ,complete all as specified and as directed.. |
| 69 | Supply and fixing offactory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing ,complete all as specified and as directed.. |
| 70 | Supply and fixing 150 mm long aluminium handle cast type anodised, complete, all as specified and as directed. |
| 71 | Supply and fixingstainless steel butt hinges 100mm long medium weight, complete, all as specified and as directed. |
| 72 | Supply and fixing200 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete, all as specified and as directed. |
| 73 | Supply and fixing for aluminium frame / shutter for door, window, ventilator, partition with one or more rebats including joint cleat and all necessary items including taking out existing shutters complete all as specifiedas directed.. |
| 74 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads , complete, all as specified and as directed. |
| 75 | Material and labour tinted sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, complete, all as specified and as directed. |
| 76 | Material and labour for sheet glass 3.0mm thick ordinary qualityand glazing with oil putty in square not exc 0.5 sqm in each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified by the Engineer-in-Charge. |
| 77 | Supply and fixinggalvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised mild steel wire staple, complete, all as specified and as directed. |
| 78 | Supply and fixinggalvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed to steel/wooden /aluminium window/ frame with tinned tacks or galvanised mild steel wire staple as in repair, complete, all as specified and as directed. |
| 79 | Dismantling Brick tiles or terracing tiles, single layer on roofs , complete, all as specified and as directed. |
| 80 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including removing old tar felt, all loose dirt, cement plaster, cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss, small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work complete all as specified and directed by EIC. |
| 81 | Material and labourfor cement concrete Type B–1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in PCC padding, paving, coping, roof kerbs or mud stops, rounded, etc and other like works, complete, all as specified and as directed. |
| 82 | Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminous primer @ 0.40 litre /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temperature and viscosity 70–160 cps over the primer coat with overlap of 100mm at theside and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc. after preparing the surface complete as per standred practice as per manufacture\"s instructions. The vital physical and chemical parameters of the membrane shell be under :–(i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms.(ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d–5147)(iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only, complete all as specified and as directed.(iv)The work shall be carriout at a height upto 12 metre. |
| 83 | Material and labour providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternatebays (not exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work ,complete all as specified and as directed.. |
| 84 | Demolition of cement concrete (any type) for existing sunken portion of WC /Floor trap incl removing of all debris from site to a distance exc 250 m but not exc 500m and deposited where directed incl cleaning of surface with wire brushes and water complete all as specified and directed |
| 85 | Material and labour PCC 1:5:10 type E-2, using 40 mm graded crushed stone aggregate as in filling in sunken floor, rounded or chamfered on edges complete all as specified.as directed. |
| 86 | Precast PCC plain factory made tiles,ISI marked,22 mm thick of size 250 mm x 250 mm, fabricated using grey cement & no pigments. on 15 mm thick cement mortar (1:3) bedding and joints groutedand pointed flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified as directed. (WPC including the rate). |
| 87 | Material and labour for carrying out water proofing treatment of sunken floor complete all as specified under :-- (i) Taking down plaster from the walls upto 450mm hight and scrapping the wall and floor surface with wire brush and cleaning with water and allow to dry.(ii) All brick joints and superficial cracks, shall be repaired with polymer modified mortar using URP as admixture A 10% of cement content.(iii) PCC kerb and padding shall be laid to desired slop using waterproofing compound LW+. (Payment will be done in concerned items).(iv) 15 mm thick polymer modified using URP as admixture @ 10 % of cement content shall be applied on sloped base and vertical surfaces.(v) The surface thus prepared shall be coated with two coats of Dr Fixit Hydrochem Super or Equivalant in Asian/ Pidilite/Birla/Berger. (vi) A layer of open woven glass fibre mesh shall be laid over base and vertical surfaces of sunken area. (vii)Curing the sunken portion with water min 48 hrs by ponding. |
| 88 | Schedule \"A\" Part-II (E/M itmes)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc.,,complete all as specified and as directed.. |
| 89 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly(boxesshall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally) including provision of new covered plate over sunken box for housing themodular switches , modular socket outlets,modularfan regulators etc.for one light/fan/exhaust fan/bell point controlledby one way switch,complete all as specified and as directedby Engineer-in-Charge. Note :-a) All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid forseparately . |
| 90 | Description all as per serial item No.89 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch onindependent board. complete, all as specified and as directed. |
| 91 | Description all as per serial item No.89 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board,complete, all as specified and as directed. |
| 92 | Description all as per serial item No.89 here-in-before but forOne light point Controlled by two two way switches.complete, all as specified and as directed. |
| 93 | Description all as per serial item No.89 here-in-before but for one socket outlet 6 Amp with 1.50 sq mm PVC insulated, unsheathedcable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 1.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copperwire as earth continuity conductor connected to common earth dolly, ,complete all as specified and as directed.. Note : (i) Point wiring shall be done in a manner that not more than 04 socket point executed in one circuit.(ii)Each socket point will be measured and paid as per point. |
| 94 | Description all as per serial item No.89 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathedcable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copperwire as earth continuity conductor connected to common earth dolly, ,complete all as specified and as directed..Note : (i) Point wiring shall be done in a manner that not more than 02 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point. |
| 95 | Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts, complete all as specified and as directedby Engineer-in-Charge. |
| 96 | Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 voltscomplete, all as specified and as directed. |
| 97 | S&F Modular Switch two way 6 Ampsone module complete all as specified and directed. |
| 98 | Supply and fixing of modular socket outletmultipin combined,6 Amp, one way, two module, 230 voltscomplete, all as specified and as directed. |
| 99 | Supply and fixing ofmodular socket outletmultipin combined, (6pin), 16 Amps, one way, two module, 230 voltscomplete, all as specified and as directed. |
| 100 | Supplyand fixingas in repairelectronic Fan regulator, modular 100 watts, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep, complete, all as specified and as directed. |
| 101 | Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete, all as specified and as directed. |
| 102 | Supply and fixing ceiling rose surface type 2/3 terminalpolycarbonate, isolated body ,complete all as specified and as directed.. |
| 103 | Supply and fixing in repair,LED batten fitting 10-12 watts, 2 feet, aluminium housing with electronic drivercool/warm typeindustrial model complete,connecting with copper conductor flexible cablefrom ceiling rose to connector of the light ,complete all as specified and as directed.. Cat part No. LUMILINE+ BS10WLED865SPCSS of make Havells or equivalent in make given in Appx \"B\". |
| 104 | Supply and fixing in repair,LED Bldg Security Light Fittings of capacity 35 watt made up of die castaluminiumhousing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection including service bracket of mild steel pipe 25 mm bore medium grade of length 0.70 mtr fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts and washer and suitable reducer for connecting fitting to GI pipeand other connected accessories & making electrical connection, ,complete all as specified and as directed.. |
| 105 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA \"B\" curve including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge.Cat part No.811955 of make Indo Asian or equivalentin make given in Appx \"B\". |
| 106 | Supply and fixing sheet metal MCB DB SPN8 way with 200 Amps rated bus bar single pole and neutral withdouble door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. Cat part No.811826 of make Indo Asian or equivalent make given in Appx \"B\". |
| 107 | Supply and fixing sheet metal MCB DB SPN 4 way with 200 Amps rated bus bar single pole and neutral withdouble door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. Cat part No.811824 of make Indo Asian or equivalent make given in Appx \"B\". |
| 108 | Supply and fixing MCB SPN, 63 Amps, 240 volt,10 KA ,\"B\" curve as per site requirement including removing old unserviceable MCB ,complete all as specified and as directed.. Cat part No 811037 of make Indoasian or equivalent make given in Appx \"B\". |
| 109 | Supply and fixing MCB SP, 6-32 Amps, 240 volt,10 KA ,\"B\" curve as per site requirement including removing old unserviceable MCB ,complete all as specified and as directed.. Cat part No 811008 to 811015 of make Indoasian or equivalent make given in Appx \"B\". |
| 110 | Supply and fixing MCB SPN 32 Amps, 240 volt,10 KA ,\"B\" curve as per site requirement including removing old unserviceable MCB ,complete all as specified and as directed..Cat part No 811035 of make Indoasian or equivalent make given in Appx \"B\". |
| 111 | Taking down ceiling fan and refixing the same after cleaning/painting in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed. |
| 112 | Taking downexhaust fan and refixing the same after cleaning/painting in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed. |
| 113 | Supply and laying as in repair sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI markedmulti stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and includingPVC conduit medium gradeISI marked of adequate size for housing the wires ,complete all as specified and as directed..Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.(ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 114 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earthwire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test pointas directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/cboth ways with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testingas in repair complete all as directed by Engineer-in-Charge and earth testing on completion. |
| 115 | Note:-Amount of credit ofRs.51,229.00 for retrieved materials is mentioned in Schedule of Credit Page No. 123 & 124 of tender doCubicmetre ents in pdf form which will be deducted offline while acceptance of tender. |
