|
| 1 | Dismantling wall and ceiling boards(fibre,pulp,uninsulation etc) or unsulation boards/slabs/blankets any thickness including cover fillet complete all as specified and as directed. |
| 2 | Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc any description complete all as specified and as directed. |
| 3 | Dismantlingfloor hearth or wall tilingincludingcement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 4 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) and removing surplus spoil out of Defence Landwhere directed at a level not exc 1.5 m above the starting point complete all as directed. |
| 5 | Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articlescomplete all as specified and as directed. |
| 6 | Taking down chowkats or frame not exc. 1.5 sq m each with shutters (without taking off shutters from the fames) complete all as specified and as directed. |
| 7 | Taking down chowkats or frameexc. 1.5 sq m but n.exc 4 sq m each with shutters (without taking off shutters from the fames) |
| 8 | M&L anodized aluminium powder coating (minimum thickness of powder coating 50 micron) door shutterhaving 150mm x 44mm x 2.85 mm thick bottom rail, 150 mm x 44mm x 3mm thickmiddle rail, 100mm x44mm x2.85 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm ,powder coated aluminium handle 200 mm long (02 Nos) , 3 Nos 100 mm size chromium plated butt hinges, 2 Nos 200mm size Aluminium tower bolt and double action floor door spring hydraulically regulated inlcuding frame of section 100 mm x 44 mm x2.85 mm and door shutter, 5mm thick tinted glass and pattern, 100mm Mortice latch with two levers brass body (Make : Harrison) and fixing including taking down of existing chowkat with Shutter complete all as specified and as directed.Make of Aluminium Section : Hindalco/Jindal |
| 9 | M&L anodized aluminium powder coating (minimum thickness of powder coating 50 micron) window/ventilator shutter sliding typehaving 75mm x 44mm x 2.85 mm thick stiles bottom rail and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm , 2 no of anodized aluminium handle 150 mm size etc including frame three track of section 100 mm x 44 mm x 2.85 mm and including 5.00 mm thick tinted glass and including aluminium deco grill 50mmx50mm mesh size and 5.5mm thick and fixing including taking down of existing chowkat with shutter complete all as specified & directed.Make of Aluminium Section : Hindalco/Jindal |
| 10 | S & F of armstrong mineral fibre acoustical suspended ceiling system with dune (Tegular) edge tiles with armstrong 24mm exposed grid. The tiles should have humidity resistance of 99%, NRC 0.5, light reflectance > 85% , thermal conductivity K = 0.052 - 0.057 w/m K, colour white, fire performance UK class 0/ class I (BS 476 pt-6 & 7) in module size of 600x600x16mm, suitable for green building application with recycled content of 32%. The tile shall be laid on Armstrong Prelude 32 with 24mm wide T section flanges colour white rotary stitching on all T sections i.e the main runner, 1200mm & 600mm cross Tees with a web height of 27mm and a load carrying of 7.1kgs/sqm and minimum pull strength of 100 kgs. The T section have galvanising of 90 grams per sqm and need to be insatalled with suspension system of Armstrong. All accessories manufactured and supplied by Armstrong world industries. |
| 11 | M&L 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth withoutusing extra cement complete all as specified and as directed. |
| 12 | M&L 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface with water proofing compound finished fair and even withoutusing extra cementcomplete all as specified and as directed. |
| 13 | M&L for prepration of new plaster surfaces of walls and applying two coats of oil bound distemper including a coat of primer on plastered surfaces over 3mm thick wall care putty on wall complete all as specified and as directed. |
| 14 | M&L for complete removal of existing surface of walls and applying two coats of oil bound distemper over 3mm thick wall care putty on wall including a coat of primer on wall complete all as specified. |
| 15 | M&L forpreparing new plastered or unplastered wall surfaces and appliedtwo coatd of cement base paint complete all as specified and as directed. |
| 16 | M&L for complete removal of existing treatment of wall surfaces and applying two coat of cement base paint complete all as specified and as directed. |
| 17 | M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 18 | M&L for non skid joint free ceramic coloured tiles (premium quality)of area of eachtile exceeding 0.11 Sqm but not exceeding 0.18 Sqm and 7-8 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.make:- Kajaria/ Somany/ Johnson |
| 19 | Dito all as per item 18 above, but in skirting and 10 mm thick rendering as back coat of CM (1:4) complete all as specified and as directed. |
| 20 | M&L for roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed. |
| 21 | M&L for 20 to 25mm thick Kota stone machine cut and prepolished, jointed and pointed grey cement slurry laid over 15mm thick screed bed of CM (1:6) mixed with pigment to match the colour of stone slab complete all as specified and as directed. |
| 22 | Ditto all as per srl item No. 21 above, but on vertical surfaces such asskirting etc over and including 10 mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete all as specified. |
| 23 | M&L for brick work with sub class \"B\" old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and as directed. |
| 24 | M&L for 50mm thick PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection/surface channels finishing the surfaces even and smooth without using extra cement all as specified. |
| 25 | Dismantling of barbed wire fencing from RCC/iron pole, complete all as directed |
| 26 | Dismantling of posts/struts (wood, steel or RCC) any section including taking out embeded portion and making good disturbed ground complete all as directed. |
| 27 | Excavation in post holes(or similar holes) each in not exc. 0.50 cum getting out returning,filling in an ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance not exc. 50 Mtr and making good surface all as specified & directed. |
| 28 | PCC(1:3:6) type C2 (40mm graded stone aggregate) filling in post holes, foundation, surface channels and drains and other similar work complete all as specified. |
| 29 | M&L for Mild steel angle iron fencing posts and struts in fencing including necessary cutting , drilling , welding etc and bending to swan neck shape as required and drilling hkoles notching for wire etc conforming to Fe-410-0 or 310-0 complete all as specified and as directed by Engr-in-Charge. |
| 30 | Mild Steel work in flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engrneer-in-charge |
| 31 | Fixing only chain link fencing including line wires any mesh size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed |
| 32 | Supply only chain link fencing plain mild steel galvanised wire 4mm dia galvanising steel wirewith mesh size 50mmx50mm any size or type complete all as specified and as directed. |
| 33 | S&F mild steel boltpurpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut approved by Engineer in charge complete all as specified. |
| 34 | Prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 35 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured |
| 36 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and as directed. |
| 37 | Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steelconforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and as directed. |
| 38 | Dismantling structural steel work including door, gates etc complete all as directed. |
| 39 | S&F 16 to 18mm thick granite (of any type) tiles machine cut, in skirting/dado laid over cement plaster 10mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admiture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and as directed. |
| 40 | M&L for MS TMT bars 10 mm dia and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for column hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia. |
| 41 | Ditto all as per SerItem No 23 here in before, but except bricks |
| 42 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete walls, finished evev and smooth without using extra cement to match with the existing surfaces. |
| 43 | Material and Labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in surface channels and drains complete all as specified and as directed by the Engr-in-Charge. |
| 44 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitered/stopped ends all as specified. |
| 45 | M&L Precast RCC 1:2:4 (Noinal Mix) using 20mm graded aggregate as in drain slab supported on wall etc all as specified and as directed. |
| 46 | M&L for cement concrete type B1 (1:2:4) using 20MM graded aggregate as in coping etc complete all as specified |
| 47 | Material and labour for PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) as in foundation, mass fillings for posts/struts etc. complete all as directed. |
| 48 | M&L for Rolled sections as in vertical member, rafters; purlins where connectedto common rafters and running rails and guides for sliding doors; fixedwithangle cleats or other connecting plates conforming to Fe 410-W(GdeE-250) quality A, complete all as specified and as directed by Engr-in-Charge. |
| 49 | Supply and fixing pre-painted galvalume aluminium zinc coating GI bared corrugated steel roof sheet 0.50 mm thick, AZ-70of any colour having tensile strength of 550mpa fixed with self drilling screws as specified. |
| 50 | Surface excavation n exc 30cm deep and averaging 15cm deep in soft/loose soil all as specified and as directed. |
| 51 | Materials and labour for broken stone or boulder hard core of gauge n.exc, 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 52 | M&L 100mm thick Cement concrete type C-2, 1:3:6( using 20 mm grade crushed stone agg) as in sub base of flooring, complete all as specified and as directed. |
| 53 | M & L 30mm sand cushion, filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 54 | M & L for laying 60 mm thick machine pressed precast concrete interlocking paver block and shape and size conforming to IS -15658-2006 of M-35Grade with grey cement andpigment complete all as specified and as directed.NOTE: The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independtly by the GE. |
| 55 | M&L PCC (1;2:4) type B-1 (using 20mm graded crushed stone agregete) as in sides of rounded or chamfered on edges of interlocking tiles complete all as specified and as directed. |
| 56 | Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc includingremoving switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable lightand for taking credit of unserviceable light as per Sch of creditand making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved complete all as specified and as directed. |
| 57 | Material and labour for point wiring with modular accessories for light point with 1.5 Sqmm (nominal area) FRLS PVCinsulated unsheathedmulti stranded copper conductor of size 1.5 Sqmm cabledrawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel modular boxes(1.6 mm thick sheet and min 50 mm deep) with suitable modules white cover plate fixed with nickel polished screws etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engineer-in-Charge.Note :No more than 06 point on one circuit and separate conduit will be used for power circuit and light point circuit as per NBC code 2016. In addition Electric wiring tests to be carried out in accordance with regulation 1103 & 1104 of regulation for the Electrical equipment of buildings (I E E regulations ,Eleventh edition and as per IE rules 2003 in given format in Annexure I. If resistance of wiring will not meet critaria of IEE regulation contractor will be responsible for that and change in wiring will be executed without extra cost. |
| 58 | Ditto all as per srl item No. 57 above, but for one fan point controlled by one switch complete all as specified. |
| 59 | Ditto all as per srl item No. 57 above, but for one socket outlet 5 Amps on independent board complete all as specified. |
| 60 | Ditto all as per srl item No. 57 above, but for one socket outlet 5 Amps on the sameboard controlled by one switch complete all as specified. |
| 61 | Ditto all as per srl item No. 57 above, but with 2.5 Sqmm(nominal area) FRLSPVC insulated unsheathed multi stranded copper conductor cable for one 3 Pin 15 Amp socket on independent board incl Modular cover plate and suitable metal sunken box of suitable modules including one 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable green colour 1100 volts grade as earth wire connected to earth dolly with all accessories complete all as specified and as directed by Engineer-in-Charge |
| 62 | S&F Modular switch piano flush type, 6 Amps, 240 Volt AC single pole, one way complete all as specified. |
| 63 | S&F Modular switch piano flush type, 16 Amps, 240 Volt AC single pole, one way complete all as specified. |
| 64 | S&F Modular socket out let 6 Amp, 5 pin, 2-in-1 flush type complete all as specified. |
| 65 | S&F Modular socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 16 Amps, flush type complete all as specified. |
| 66 | S&F ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete all as specified. |
| 67 | S&F2 Module five step fan regulator, electronic type, single phase,including connection complete all as specified. |
| 68 | Fixing only serviceable tube light fittings any type and any description retrieved under item Srl No. 56, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 0.50 sqmm, 3 core, 1100 volts grade completeall as directed. |
| 69 | Supply and fixing LED tube light fitting polycarbonate housing 1 x 20Watt, appx 4 feet long, with decorative box linear, housing environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and as directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt.(b) Input Voltage range : 140 to 270 volts.(c) Temp operating range : Minus 5°C to Plus 45°C(d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5%(f) IP rating : IP-20.(g)LED Driver of the same make as of the luminaire.(h) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K(l) CRI : greater than 90 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) |
| 70 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed |
| 71 | Fixing only serviceable light fittings 600x600 mm 35/36 Watt retrieved under item Srl No. 70, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 1.50 sqmm, 3 core, 1100 volts grade completeall as directed. |
| 72 | Material and labour in replacement of sub main wiring with four run of FRLS PVC insulated unsheathed multistranded copper conductor single core cable 6 Sqmm drawn through in and including PVC rigid non metalic concealed conduit (medium grade) and one run ofFRLS PVC insulated unsheathed multistranded copper conductor single core cable (greencolour) of size 6 sqmm with any type of civil work involved to make good disturbed surfaces complete all as specified.Note : Four run(3P+01 N) of 6 sqmm wire and one run of 6 sqmm wireas earth wire andPVC concealed conduit shall be measured as one unit |
| 73 | Supply and fixing energy efficient LED security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass,better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5Sqmm from ceiling rose to light fitting, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete all as specified and as directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt.(b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95(e) THD : Max10%.(f) IP rating : IP66. (g) IK rating:Minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire.(j) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI: Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)(q)LED source : Hi power LED 3 to 5W High power type |
| 74 | Supply and fixing (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and as directed by Engineer-in-charge.Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ. |
| 75 | Supply & FixMCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per complete all as specified and as directed by Engr-in-charge. |
| 76 | Supply & FixMCB SPN 40to 63 Amps 240 V, 10 KA, B curve as percomplete all as specified and as directed by Engr-in-charge. |
| 77 | M&L for Earthing completein replacementwith galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground levelconnected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, saltall as shown in electrical plate No 3 of SSR Part-I 2020 connected to earthingpoint with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved.all as specified and as directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.Note:Earth plate weight will be approved by Engr in charge before execution of earth work. |
| 78 | Supply, installing, commissioning and testing Hi wall spilt units indoor/ outdoor Air Conditioner cooling type both complete with cordless remote control unit and within built air purifier, dehumidifier, air filter and dust filter for better indoor air quality with minimum BEE approved, 5 star rating, inverter type, EER 3.2, electric driven single phase 230 Volts, AC, 50 Hz, R-410A/ R-32 refrigerant of capacity 2 Ton, inverter type, noise level should be less than 45 DB including copper pipe of adequate size and required length as directed duly insulated with suitable insulating material e.g. Class ‘O’ Nettle insulation of minimum 12mm thick for condensing unit, copper cable of suitable size for making electric connection, including necessary fixing arrangement (indoor unit at suitable place and height inside the room and outdoor unit at suitable place outside the room) complete all as specified and as directed.Notes : (a) Suitable piping shall be provided of adequate length of size 5/8” for draining of condensate water from indoor unit.Cost of same shall deemed to be included in quoted rate.Make:- Mistbushi/ O-General/ Bluestar/ Hitachi. |
| 79 | (b) Suitable copper tubing in addition if required extra as per site requirement from indoor unit to outdoor unit shall be provided and cost of same shall to be included in quoted rate.(c) Cost for metallic bracket and nut bolt for fixing indoor and outdoor unit including necessary cutting/ grouting in walls by cutter and making good the surface in CM 1:3 and to the original finishes (white wash/ colour wash/ distemper) shall deemed to be included in quoted rate.(d) Contractor shall submit original purchase voucher and warranty card. Minimum warranty should be 1 year for complete product, 10 year for compressor 5 year for condenser and PCB card after installation and commissioning of complete unit |
| 80 | Supply, installing, commissioning and testing Hi wall spilt units indoor/ outdoor Air Conditioner cooling type both complete with cordless remote control unit and within built air purifier, dehumidifier, air filter and dust filter for better indoor air quality with minimum BEE approved, 5 star rating, inverter type, EER 3.2, electric driven single phase 230 Volts, AC, 50 Hz, R-410A/ R-32 refrigerant of capacity 1.5 Ton, inverter type, noise level should be less than 45 DB including copper pipe of adequate size and required length as directed duly insulated with suitable insulating material e.g. Class ‘O’ Nettle insulation of minimum 12mm thick for condensing unit, copper cable of suitable size for making electric connection, including necessary fixing arrangement (indoor unit at suitable place and height inside the room and outdoor unit at suitable place outside the room) complete all as specified and as directed.Notes : (a) Suitable piping shall be provided of adequate length of size 5/8” for draining of condensate water from indoor unit.Cost of same shall deemed to be included in quoted rate.Make:- Mistbushi/ O-General/ Bluestar/ Hitachi. |
| 81 | ((b) Suitable copper tubing in addition if required extra as per site requirement from indoor unit to outdoor unit shall be provided and cost of same shall to be included in quoted rate.(c) Cost for metallic bracket and nut bolt for fixing indoor and outdoor unit including necessary cutting/ grouting in walls by cutter and making good the surface in CM 1:3 and to the original finishes (white wash/ colour wash/ distemper) shall deemed to be included in quoted rate.(d) Contractor shall submit original purchase voucher and warranty card. Minimum warranty should be 1 year for complete product, 10 year for compressor 5 year for condenser and PCB card after installation and commissioning of complete unit |
| 82 | Supply and installing of voltage stabilizer for automatic operation having input & output voltage, amps, over & low voltage cutout and timer delay function etc digital display single phase naturally air cooled indoor type & designed for input variation between 160V to 270V with output voltage stabilized at 230V with accuracy of ± 2.5% and of capacity 15A with wall mounting bracket complete all as specified and as directed |
| 83 | Supply and installing of voltage stabilizer for automatic operation having input & output voltage, amps, over & low voltage cutout and timer delay function etc digital display single phase naturally air cooled indoor type & designed for input variation between 160V to 270V with output voltage stabilized at 230V with accuracy of ± 2.5% and of capacity 12A with wall mounting bracket complete all as specified and as directed |
| 84 | Supply & Fixing energy saving, 5 Star raing ceiling Fan BLDC dtype of 1200mm sweep, 230V complete with all accessories (without remote type) as specified and as directed by Engr--in-Charge.Make:- Usha/Havells/ Crompton Greaves. |
| 85 | S&F exhaust fan, steel body AC single phase, 230V of size 380mm sweep with blades, frame and louvers made of MS powder coated ( 1.2mm,thick) sheet frame haing aluminium flappers complete including making/ cuting of hole in wall of any thickness and making good to distributed surface complete incl plastering all as specified and as directed. |
| 86 | M&L for GI pipe medium grade 40mm bore laid in trenches or fixed on wall/ floor for fixing of ceiling fan completeall as specified and as directed. |
| 87 | M&L for fan hook for fixign of ceiling fan suitable for 40mm dia GI pipe complete all as specified and as directed. |
| 88 | S&F steel water tubing galvanized, 15mm bore, medium grade, fixed complete to walls, ceiling or in floors etc, of size 15mm dia along with sockets, tees, bends, elbows, wall clamps, necessary joining materialother accessories required for fixing of pipe with wall/ floor complete all as specified and as directed. |
| 89 | Cutting exisitig steel tubing of size 15mm bore for alterations or additions cutting incl threading, screws & fixing in position complete all as specified and as directed. |
| 90 | S&F electric water heater (ISI marked) storage type, vertical type with inner tank and heat element upto 2KW capacity 25 litre, BEE 5 star rated complete with all accessories such a safety valve, thermostat, temprature seting/ adjustment, NRV, connection piece etc complete all as specified and as directed. |
| 91 | M&L for PVC connections for water heaters with PVC flexible pipe 15mm dia 450mm long, suitable for hot water with 02 Nos connectors and washers complete. |
| 92 | S&F single pole and neutral enclosure with a two pin and earth plug and socket (for geysers) complete with one single pole MCB of 20 amp 240 V 10 KA complete all as specified and as directed. |
| 93 | S&F brass chrome plated stop valve (ISI marked) screwed down high pressure with butterfly handle screwed both ends of size 15mm dia with required GI fitting complete all as specified and as directed. |
| 94 | S&F chromium plated bib tap cast copper ally, screwed down, screwed for iron pipeboth ends of size 15mm dia withrequired GI nipple, complete all as specified and as directed. |
