Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed. |
| 2 | M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed. |
| 4 | All as per item No 3 above but except stone complate all as specified and directed. |
| 5 | M&L PCC solid building blocks 10 cm thick type B1 1:2:4set in cement mortar (1:6) complete all as specified and directed. |
| 6 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete to squared rubble walling, regular coursed, Jodhpur type complete all as specified and directed. |
| 7 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 8 | M&L for 25mm thick cement concrete type B-0 1:2:4 as in subbase of floor tiles (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed. |
| 9 | M&L for 15 mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to receive tiling/floor finishes complete all as specified and directed. |
| 10 | M&L for Non-skid coloured ceremictiles joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc.0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade completeall as specified and directed. |
| 11 | All as per above 10 but as in skirting including 10 mm thick rendering in cement mortar 1:4 completeall as specified and directed. |
| 12 | M&L Non skid ceramic colour joint free tiles 6 to 7 mm thick of size area n. exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match completeall as specified and directed. |
| 13 | M&L for glazed colour ceramic tiles of size 300x450x7mm thick, laid in vertical surface dado/skirtingjoint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles(High-lighter pattern) including10mm thick rendering in CM 1:4 over stone masonary surfaces finished even & rough to receive tiling etc finish complete all as specied and directed. |
| 14 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar completeall as specified and directed. |
| 15 | M & L 18 to 20 mm thick machine cut Kota stone slab flooring , cooking plate from etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6 completeall as specified and directed. |
| 16 | M & L 18 to 20 mm thick machine cut Kota stone in riser of steps, skirting, dado and piller laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishingincluding 10 mm thick rendering in cement mortor 1:6 completeall as specified and directed. |
| 17 | M & L 18 to 20 mm thick machine cut Kota stone in shelves and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing completeall as specified and directed. |
| 18 | M & L 18 to 20 mm thick machine cut one side polished black granite in kitchen plate form and windows cill, set and jointed including 20 mm thick screed bed in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishingcomplete all as specified and directed. |
| 19 | Taking down existing cementplaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 20 | M&L for 15 mm thick rendering CM (1:4) over stone masonary of wall using WPC surfaces finished even & smooth without extra cement complete all as specified & directed. |
| 21 | M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia of RCC roof projection at any height etc, finished even & smooth complete all as specified and directed. |
| 22 | M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified & directed. |
| 23 | Supply only Integral water proofing compund ISI Marked |
| 24 | Racking out joints/pointing to Square rubble masonryJodhpur type regular coursed built in cement mortar complete all as specified and directed. |
| 25 | M&L for Keyed pointing to square rubble masonryJodhpur type regular course in CM 1:3 complete all as specified and directed. |
| 26 | M&L preperartion ofnewly plastered surfaces of wall and applying 2mm thick of wall care putty with fair finished and even surface and applying two coat of oil bound distemper over a coat of primer complete all as specified & directed. |
| 27 | M&L for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over 2mm thick wall care putty of birla white puttion plastered surfaceall as specified and directed. |
| 28 | M&L for applying three coats of white wash on newly plastered surface of wall including preparation of surfaces complete all as specified and directed.. |
| 29 | M&L for applying three coats of white wash on newly plastered surface of ceilingincluding preparation of surfaces complete all as specified and directed. |
| 30 | M&L for applying one coats of white wash onold surface of wall complete all as specified and directed. |
| 31 | M&L for applying one coats of white wash on old surfaces of ceilingcomplete all as specified and directed. |
| 32 | M&L for applying two coats of cement based paint on newly plastered/ unplastered surface of wall including preparation and one coat of chalk whiteof surfaces complete all as specified and directed. |
| 33 | M&L for applying one coat of cement base paint on old surfaces including preparation complete all as specified & directed. |
| 34 | M&L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed. |
| 35 | M&L for applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and directed. |
| 36 | Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 37 | Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 38 | Taking down shutter of any description, exc.1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 39 | M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frame ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 40 | M & L for mild steel framed work as in brackets etc for cooler stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed . |
| 41 | S&F mild steel frame work as in stairs ,hand railings, half roundor other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for roof including necessary drilling bolting or riveting etc and similar work confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 42 | S&F for Mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesbracket framing including distance pieces, cleats etc Fe-410-W(Gde-E-250) quality complete all as specified |
| 43 | M&L forUPVC Caoted Celuka printedin one of two different colours( with wood grain printed pattern/ivory colour finish) polyvinyl chloride (PVC) sheetframe of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet andjoined with suitable Cement Solvent adhesive and screw.Theframe shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and as directed. |
| 44 | M&L for 18 mm thick solid PVC sheetUPVC Caoted Celuka printedin one of two different colours( with wood grain printed pattern/ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed . |
| 45 | S&F 30 mm width ofFI continious pianohinges, stainlesssteel, complete assembly complete all as specified and directed. |
| 46 | Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and as directed. |
| 47 | S&F \"0\" degree clip type self closing hinges for cabinets fixed with cadimum coated screws, complete all as specified and as directed. |
| 48 | S&F 75mm size bright finished cromium plated steel handleof approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers complete all as specified and directed. |
| 49 | S&F magnetic catchesfor cabinets of size 50 mm complete with striking plate & magnetic stud complete all as specified and directed. |
| 50 | S&F drawer runners folding typewith guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers complete all as specified and directed.. |
| 51 | M&L for stainless steel tray as per trade patternof various sizes for drawer to keep the kitchen utensil as per sample complete all as specified and directed. |
| 52 | S&F of 2nd class hardwood 35mm thick gauzed/Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24, supplied and fitted to chowkats complete all as specified and including following as directed :-(a) SS wire cloth 0.36mm nominal dia of wire, average width of aperture 1.40mm fixed with SS wire staple.(b) Aluminium Grill Medium grade mess size 50x50mmx5mm , fixed at outer edge at outer edge of door.(c) Apply one coat of Pink-Primer |
| 53 | S&F for Flush shutters 35 mm thick, solid core construction and plywood face is covered with decorative face with sunmica / veneer with lipping frame edging to match with mortic lock and handle complete all as specified and directed. |
| 54 | S&F for 35mm thick IInd Class HW factory made partly gauged/glazed and partly panelled shutters, openrebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed and including following as directed :-(a) SS wire cloth 0.36mm nominal dia of wire, average width of aperture 1.40mm fixed with SS wire staple.(b) Aluminium Grill Medium grade mess size 50x50mmx5mm , fixed at outer edge at outer edge of door.(c) Apply one coat of Pink-Primer |
| 55 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 56 | Providing & Fixinng Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 57 | Taking down steel window/ ventilator complete all as specified and directed. |
| 58 | S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by Engr-in-charge) as shown on drg No CEJZ/TD/20 of sheet 1/3 to 3/3 complete |
| 59 | S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. (with or without cooler opening as directed by Engr-in-charge) as shown on drg No CEJZ/TD/20 of sheet 1/3 to 3/3 complete |
| 60 | S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified |
| 61 | S&F Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified |
| 62 | S/F of aluminium anodized tower bolt of size 200 mm long incl necessary screw complete all as specified and directed. |
| 63 | S&F aluminum anodisedhandle of size 150mm long necessary \"Bow Handle D type\" complete all as specified and directed. |
| 64 | S&F for aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed. |
| 65 | S &F of stainless steel butt hinges 100 mm size for WPC door complete all as specified and directed. |
| 66 | S &F of mild steel butt hinges 100 mm size complete all as specified and directed. |
| 67 | S&F 100mm size single action door spring hinge complete all as specified and directed. |
| 68 | S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring with overall length of cover plate 140mm long complete all as specified and directed. |
| 69 | S&F for 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed. |
| 70 | S&F for 3 mm thick plain glass ordinary quality & glazing complete all as specified and directed. |
| 71 | S&F for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width ofaperature 1.00 mm complete all as specified and directed. |
| 72 | S&F in repair galvanised mild steel wire cloth 0.56mmnominal dia of wire and average width ofaperature 1.00 mm with necessary fitting on steel/ wooden surfacecomplete all as specified and directed. |
| 73 | M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing,coping, chamfered edgesincluding necessary form workcomplete all as specified and directed. |
| 74 | S&F for flat iron for hold fast and similar workconfirming to Fe-290Gde-E-165 fixed with welding and necessary item complete all as specified and directed. |
| 75 | S&F for Stainless steel25mm curtain rodwith fixing brackets, knob etc as in repairs complete all as specified and directed. |
| 76 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide 600mm long with aluminium alloy brackets and gaurd and railing 60cm long complete all as specified |
| 77 | S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass of size 250 mm conical shape /size with CP brackets, gaurd and railing complete all as specified and directed. |
| 78 | S&F in repair wall mounted Stainless steel Soap dish of size 125x75mm any type, fixed to plugs with chromium plated brass screws complete all as specified. |
| 79 | S&F in repair CP brass towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and plastic rawl plugs/cleats, complete all as specified and directed. |
| 80 | S&F as in repairs Bevelled edge mirror size600x450mm of selected quality glass mounted on PVC frame fixed to wooden plugs with chromium plated brass screws and cup washres complete all as specified and directed. |
| 81 | S&F in repair satainless steel chromium plated peg set of six fixing with wall screws and plastic rawl plugs/cleatscomplete all as specified and directed. |
| 82 | S&F in repairsinks made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or fixing in RCC slab and connecting waste coupling and to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as directed by Engr-in-Charge. |
| 83 | S&F Stainless steel Plate Racks made of stainless steel0.60 mm thick with plugs, washers and fixed with bolts /screws of size 750 X 600 X 250 mm asin repair complete all as specified and directed. |
| 84 | S&Fas in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl \"P\" or \"S\" traps,long bend flush pipe of 32mm dia HDPE pipe etc all as specified & directed. |
| 85 | S & F as in repairsvitreous china wash down water closet Anglo Indian Type pedestal pattern with seat & cover complete incl fixing of long bend flush pipe etc complete all as specified and directed. |
| 86 | S & F in repairVitreous china wash basin, white flat/Corner back size 450x300 mm including , waste pipe, wast coupling MS brackets complete all as specified and directed. |
| 87 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore acomplete all as specified and directed. |
| 88 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore complete all as specified and directed. |
| 89 | S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with lead joints laid in trenches or in floor complete all as specified and directed |
| 90 | S&F 75 mm dia Cast iron soil waste and vent pipes in any length with or without ears with lead joints laid in trenches or in floor complete all as specified and directed |
| 91 | S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with lead joints fixed on wall complete all as specified and directed |
| 92 | S&F 75 mm dia Cast iron soil waste and vent pipes in any length with or without ears with lead joints fixed on wall complete all as specified and directed |
| 93 | S&F100 mm CI branch pieces single socketed Y equal or unequalfixed with lead joints complete all as specieied and directed. |
| 94 | S&F75 mm CI branch pieces single socketed Y equal or unequalfixed with lead joints complete all as specieied and directed. |
| 95 | S&F100mm CIbends any radius fixed with lead joints complete all as specified and directed |
| 96 | S&F 75 mm dia CI bend with oval acess door fixed to pipefixed with lead joints complete all as specified and directed. |
| 97 | S&F 100mm dia CI vent cowlfixed to pipe complete all as specified and directed. |
| 98 | S&F 75 mm dia CI floor trap plain grating including jointing with solvent cement75mm dia complete all as specified and directed. |
| 99 | M&L in repair for 150x150mm size, type P salt glazed stone ware gully traps,square mouldedfixed complete all as specified and directed. |
| 100 | S&F as in repairsof 15 mm diabib cock long body with flange withchromium plated fixed withiron pipe complete all as specified and directed. |
| 101 | S & F as in repairs 15 mm dia angular stop cock with chromium plated long threadwith flange complete all as specified and directed. |
| 102 | S & F as in repairs 15 mm dia two way angular stop cock with chromium plated long threadwith flange complete all as specified and directed. |
| 103 | S&F as in repairs CP Jet spray as in repair with 15mm x 900mm tube as specified and directedas per sample approved by Engr in chargecomplete all as specified and directed. |
| 104 | S&F as in repairs15mm bore CP brass Sink mixer with regular spout wall mounted and brass nuts ISI Marked Mcomplete all as specified and directed. |
| 105 | S&F as in repairs15mm bore CP central hole basin mixer single cock wall mounted swing spout popup waste system with 450mm long copper pipe and brass nuts ISI Marked complete all as specified and directed. |
| 106 | S& F as in repairs chromium plated Wall mixture 3-in-1 system fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure pipe 15mm bore, Hot or Cold, screwed for iron pipe with adujstable wall flange and legs complete all as specified and directed. |
| 107 | S&F in repair of chromium plated shower rose 150x150mm dia square with shower arm complete all as specified and directed. |
| 108 | Supply & Fixing low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete all as specified and directed. |
| 109 | S&F for 500 Ltrs capacity of tank rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position white/colouredincluding tank led cover with fixing arrangement inlet/outlet/over flow checknut etc as in repairs complete all as specified and directed. |
| 110 | S & F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 111 | S &F in repair 25 mm dia stop valves, cast copper alloy withscrew down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified and directed. |
| 112 | S &F in repair 20 mm dia stop valves, cast copper alloy withscrew down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified and directed. |
| 113 | M&L for 100 thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in water tank plateform over roof top finished even and smooth complete all as specified and directed. |
| 114 | Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise complete all as specified and directed. |
| 115 | M&L forProviding precast RCC type B1 1:2:4 (using 20mm graded aggregate) as in cover slab for man holes set in CM 1:6 complete all as specified and directed. |
| 116 | M&L 50mm thick sand stone slabs machine cutin sunshades, chajjas, shelves, cills, landings cover slabs on manholes stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness complete all as specified and directed. |
| 117 | Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed. |
| 118 | All as per item No 117.00 here-in-above,but size of pipe 20 mm bore. |
| 119 | All as per item No 117.00 here-in-above,but size of pipe 15 mm bore. |
| 120 | S&F of water GI tubing 25 mm bore, medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed. |
| 121 | All as per item No 120.00 here-in-above,but size of pipe 20 mm bore. |
| 122 | All as per item No 120.00 here-in-above,but size of pipe 15 mm bore including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed. |
| 123 | Demolition of reinforced cement concrete of any description for roof,colums, beam of any type etc complete all as specified and directed. |
| 124 | Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed. |
| 125 | From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complere all as specified and directed. |
| 126 | Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and directed. |
| 127 | M & L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijjaand in shelveetc complete all as specified and directed. |
| 128 | M & L RCC design Mix-25using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc. complete all as specified and directed. |
| 129 | S & F mild steel TMT bar10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed. |
| 130 | S & F mild steel TMT bar6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed. |
| 131 | S & F mild steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed. |
| 132 | M&L for 30 mm thick guniting in patches on to the required area on RCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at any heights from existing ground floor and at any locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete as specified here in before and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dustover treated surface and applying 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, and removing the debris out side the MOD land in low lying areasand leveling complete all as specified & as directed. |
| 133 | M& L for roof treatment in the following stages :- (a) first Course :M&L for15 mm thick plaster with CM 1:3 mixed surface even and smooth with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately).(b) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied water proofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect as per the direction of Engr-in charge/consultant. Also, proper surface preparation along with covingat corners is must. Note : - 1.The authorized applicator of manufacturer shall be approved by GE. |
| 134 | Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed. |
| 135 | M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement including cutting of joints n.exc 3.0 mtr length complete all as specified and directed. |
| 136 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring, path and sub foundation etc complete all as specified and directed. |
| 137 | M&LProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 138 | M&L forProviding and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 139 | M&L for Repair to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with WPC than painting with bitumen grade VG 30/ 40 over a coat of bitumen primer putting 50 micron polythene than filling with PCC 1:5:10type E-1 using 40mm graded stone aggregate and inserting 600x50 mm bore GI water pipe light grade spout incliding demolition and Removing of existing filling in sunken floor wc/ bath/ kitchen and complete all as specified and directed. |
| 140 | Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such asswitches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittingsetc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from thesite and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces. |
| 141 | Taking down DB with MCB any type/any size & single pole and neutral enclosure with two pin and earth plug with MCB/MCCB/ including all connecting accessories. |
| 142 | M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring,drawn through in and includingnon-metalicPVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end suitable for One light/fan/bell point controlled by one, one wayswitch, complete all as specified and directed.The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates all as specified and directed by Engr-in-Charge. |
| 143 | All as per item no. 142.00 here-in-above but one 3 pin 5 or 6 Amps socket outlet on same board. |
| 144 | All as per item no. 142.00 here-in-above but one 3 pin 5 or 6 Amps socket outlet on independent board. |
| 145 | All as per item no. 142.00 here-in-above but One light point controlled by two,two-way switches |
| 146 | All as per item no. 142.00 here-in-above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board. |
| 147 | S&F Switch piano type, single pole, one way, 6 amps, 230 volts, complete all as specified and directed. |
| 148 | Supply and fixing switch piano flush type 5/6 amp single pole two way 230 V all as specifed & directed |
| 149 | S&F Bell ding dong / multi music type, AC, 230 volts, single pole, complete all as specified and as directed. |
| 150 | S&F Bell push,5/6 Amp Flush type complete all as specified and as directed. |
| 151 | S&F Switch piano type, single pole, one way, 16 amps, 230 volts, complete all as specified and directed. |
| 152 | S& F socket outlet 2 in 1, 3 pin, 6 Amp flush type ISI marked complete all as specified and directed. |
| 153 | S& F socket outlet 2 in 1, 6 pin, 6 and 16 Amp flush type ISI marked complete all as specified and directed. |
| 154 | M&L Ceiling rose three terminals, bakelite body, 230 volts, complete all as specified and directed. |
| 155 | M&L lamp holder insulated body polycarbonate type with back plate all as specified and directed by Engineer-in-Charge. |
| 156 | S&F LED lamp 9 W complete all as specified and directed by the Engineer-in-Charge. |
| 157 | Supply and fix socket type (2 module) electronic fan regulator flush type ISI marked |
| 158 | Taking down and refixing / Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan afterPainting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. |
| 159 | S&F in replacement sheet metal enclosures 240 voltwith suitable rated bus bar for double doorIP-43 DB\"s suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way completeincl dismentaling of unservceable DB all as specified and directed by Engr-in-charge. |
| 160 | S&F replacementsheet metal enclosures 415 voltTPN 4 way with 200 Amp rated bus bar, double door IP-43 DB\"s suitable fora MCB One TPN 63 Amps as incoming and 4 Nos of SPN 63 Amps Out going complete all as specified and directed by Engr-in-charge.Note: MCB/RCCB TPN/SPN/SP measured and paid saperately. |
| 161 | Supply and Fix in replacementMCBSingle pole\"C\" series5-32 Amps ISI marked incl dismantaling old unserviceable MCB SP . |
| 162 | Supply and Fixin replacement MCBSingle pole & neutral \"C\" series upto 63. Amps ISI marked incl dismantaling old unserviceable MCB SPN |
| 163 | Supply and fixing in replacementMCB TPN C Curve63 to 100 Amps Make incl disntaling of old unserviceable TPN MCB |
| 164 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete, 4 ft long, complete all as specified and as directed. |
| 165 | S&F LED light fitting 1x9Wx1x10W bulkhead luminaires including LEO light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 166 | Supply and fixing LED light fitting 1 x 10 watt (2 Feet), decorative ultra slim type, with intergal driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed. |
| 167 | Supply and fixing LED street light fitting 36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified. |
| 168 | S & F Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9W LED lamp B22 base complete all as specified and directed. |
| 169 | M&L in repairs sub main wiring withPVCinsulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through inand including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI markedand conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface,incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire.Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduitshall be measured as one unit length including taking down old UNSV submain wiring complete all as directed |
| 170 | Taking down carefully electric meter any type and capacity and depositing in MES store yardand refixing in same position, complete all as specified and as directed. |
| 171 | S&F of Heavy duty Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grounting with nut bolts, complete all as specified and as directed. |
| 172 | Supply,testing and installation in replacementelectric storage geyser of capacity 25 Ltrs,BEE 5 star rating, 230Volts, AC, 50Hz, comprising of heating element 2000 watt, storage type steel body with copper tank, puff insulation,both power indicating LED lamp and heating indicating LED lamp neccasry suitable 3 core copper cable,suitable plug top, inlcluding supply and fixing ofinlet and out let connection to geyser with steel grip,chromium plated PVC connection of862mm in length - 02 Nos (one for inlet GI pipe and other one for outlet connection) suitable to connect inlet GI pipe 15mm dia and out let GI pipe 15mm dia (out let PVC connection should be capable to withstand the designed temparature of Geyser) and geyser shall be fixed on wall surface with wall mount bracket and 10 cm anchor bolts as requiredinclduing all necessary plumbling works and civil works complete all as directed and as specified. |
| 173 | M&L for earthing complete with galvanized steel earth plate electrode of size60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metredeep below normal ground level with top edge of the plate not lessthan1.5 metre below normal groundlevel surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)incl dismanteling of existing unserviceable earth pitall as specified and directed by Engr-in-Charge. |
| 174 | Supply, laying testing in replacement, in trenches/on wall / in duct/ through protection pipe LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area16 sqmm 4 core incl retrieving / taking down/ taking out old unservisible cable from duct / trenches / pipe / pole / wall etc, complete all as diredted by Engr - in - charge Note : Earth work and brick work measured and paid separately |
| 175 | Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext complete all as specified and directed. |
| 176 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soils complete all as specified and directed. |
| 177 | Removal of excavated material soil to a distancenot exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 178 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 300x180mm x40 mm, complete all as specified and as directed. |
| 179 | Supply and laying sand (tibba sand) for sand cushioning for cable in trenches for cushioning of underground cable and punning for cushioning to cable complete all as specified and directed .Note :- Punned thicknes only shall be measured for the purpose of payment. |
| 180 | S&F of GI tubing of size 40mm bore, medium grade for protection of cables on poles / under road crossing complete all as specified and as directed. |
| 181 | NOTE:- (i)-The contract sum shall be arrived at after duducting amount of schedule of \"Credit\" from the Total quoted amount |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
