|
| 1 | Demolition of cement concrete (unreinforced) of any descriptions, Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified anddirected. |
| 2 | M&L for Removing excavated material exc. 500 m but n exc.1.5km anddepositing where directed complete all as specified. |
| 3 | Rendering 10mm thick in CM 1:3 with water proofing compound on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for for 07 days by ponding of water over the roof (Levelling course). (Note : Water proofing compoundto be measured and paid separately) |
| 4 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 5 | Supply only bitumen primer for use in waterproofing and damp-proofing treatments complete all as specified and as directed. |
| 6 | M&L for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfacescomplete all as specified directed complete all as specified. |
| 7 | M&L for complete waterproofing treatment to roof surface/parapet/ terrace using Asian Paints smartcare system (Hydroloc xtreme/ Terrace shield/ Damp Proof Ultra or approved equivalent)/ Dr. Fixit (roofseal classic/roofseal select) consisting of the following operations:(a) Preparation of roof surface including removal of existing bitumen coating, APP membrane completely, laitance, dust, grease, algae/fungus by using intense wire brushing or high speed water jet for thorough cleaning. (b) Filling of visible cracks/opening with smartcare crack seal. Bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortar.(c) Applying primer coat (Smartcare epoxy primer/damp proof primer) @ 0.92 Sqm/ltr using roller.(d) Applying two or more coats of smartcare waterproofing system (Damp proof ultra/hydroloc xtreme/terrace shield) with reinforcement mesh at roof surfces/corners/junctions, achieving minimum total dry film thickness 1.5mm.(e) Providing protective top coat of solar reflective smartcare sunshield, complete all as specified and as directed by Engr-in-Charege.Note:- Rate include for \"Taking down existing water tank from existing staging carefully and refixing the water tank in original position after waterproofing treatment including necessary fixing arrangement as required\". |
| 8 | Supply only integral water proofing compound complete all as specified. |
| 9 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixingor removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified. |
| 10 | S&F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified. |
| 11 | S&F 110mm bore PVC(SWR) bends any radius, complete all as specified. |
| 12 | Disconnecting existing water tanks exc 250 & n.exc 500 Ltr capacity, setting aside (or lovering if required ) and cleaning and removing all scale and dirt etcfrom tanks and from mouths of circulating pipes and reconnecting and re-fixing in position, complete all as specified and directed. |
| 13 | Disconnecting existing water tanks exc 500 & n.exc 1000 Ltr capacity, setting aside (or lovering if required ) and cleaning and removing all scale and dirt etcfrom tanks and from mouths of circulating pipes and reconnecting and re-fixing in position, complete all as specified and directed. |
| 14 | Dismantlingand removing to water storage tanks of capacity exc 250 & not exceeding 500 liters and removing to stores complete all as specified . |
| 15 | S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories, complete all as specified. |
| 16 | Dismantlingand removing to water storage tanks of capacity exceeding 500 liters but not exceeding1000 ltrs and removing to stores complete all as specified . |
| 17 | S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories, complete all as specified. |
| 18 | S&F in repairs 20 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20 mm - 210 grms). |
| 19 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed. |
| 20 | M&L for providing, cement concrete 1:2:4 type B-1 (using 20mm graded agg) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating for coping of sun shed, around tank stazing on roof, coping of chajjas upto double storied bldgs and the similar work complete all as directed. |
| 21 | Cleaning of roofs (metal/concrete) by cutting or uprooting grass, bushes or small trees inbldgs / old mud phuska, removing rubbish off the premises, cleaning surface with broom and water jet (remove dust, loose particles, oil, fungus) and filling with PCC, filling compound or rendering complete all as directed. |
| 22 | M&L for applying a priming coat with bitumen compatible primer (cold applied bitumen paint) on roof, chajjas, joints and similar locations @ not less than 0.25 Ltr / Sqm complete all as directed. |
| 23 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed. |
| 24 | M&L for brick work with sub class \"B\" bricks 6mm mean radius straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified. |
| 25 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed. |
| 26 | M&L rendering 15mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement. |
| 27 | M&L for 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement with water proofing compound all as specified and directed. Note: Work will be carried out up to a height of 20 m from GL. (Water proofing compound to be paid separately) |
| 28 | M&L for rendering 5 mm thick in CM 1:3 as in ceiling on fair faces of brickwork or concrete sureface finished even & smooth w/o using extra cement. |
| 29 | M&L for Preparation of Newly/previously oldplastered surfaces of wall and applying 2mm thk Wall care putty (to be applied in two coats) complete all as specified and as directed |
| 30 | M&L for preparation of newly plastered surface and applying two coat of Oil Bound distemper over a coat of primer on walls complete all as specified and as directed. |
| 31 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces, complete all as specified and as directed by Engr-in-Charge. |
| 32 | M&L for preparation of newly plastered surface and applying two coats of white wash on ceiling complete all as specified and as directed. |
| 33 | Taking down shutters of any description exc. 1 sqm and n.exc 2 sqm each and removing from site complete all as directed. |
| 34 | Taking down chowkats or frames with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cuttingholes for removalof hold fast complete all asspecified. |
| 35 | Taking down chowkats or frames with shutters without taking off shutters from the frames, area exc 1.50 sqm but n exc 4 sqm each and removal to store including cuttingholes for removalof hold fast complete all asspecified. |
| 36 | S&F Factory made PVC single door frame of size 50x47mm with a wall thickness of 5mm plain colour sheetreinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketchon page 160 of SSR 2010 part-II. The door frame to be fixed to thewall using MS screw 75mm long with PVC fastener complete as per manufacturing, instruction complete all as specified. |
| 37 | S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube 19mm x 19mm having wall thickness 19 gauge for stiles MS tube 15mm x 15mm having wall thicknessfor top and bottom rails MS frameshall be covered with 5mm thick heat moulded plain colour PVC ‘C’channel having 5mm thick PVC sheet strip 20mm wide struck insidewith solvent cement for stiles and 5mm thick PVC sheetfor top rail, lock rail and bottom rail on either side and 10mm (5mmx2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail Paneling of 5mm thick plain colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30mmPVC sheet beading and jointed together with solvent cement complete all as shown in drg. given on page 156 of SSR 2010 part II. The width of stiles and rails shall be as specified in para 8B, 21 on page 156 of SSR 2010 part II. Each PVC door shutter leaf consists of 4 Nos 100 mm long MSbutt hinges complete all as specified. |
| 38 | S&F aluminum handles, cast type anodized (size of handle 150mm) fixed with screw complete all as directed.. |
| 39 | S&F 100mm long butt hinges mild steel medium weight cold rolled ISI marked complete all as directed. |
| 40 | S&F 100mm long butt hinges stainless steel ISI marked complete all as directed. |
| 41 | Supply & fixing 150mm longaluminum anodized barrel tower bolt of extrude sectionISI marked fixed with screw complete all as directed. |
| 42 | S&F 250 mm long aluminum alloy,anodised sliding door bolts, with hasp, staple (bolt type and fixing clip of sheet, cast or extruded section or cast aluminium alloy and complete all as specified. |
| 43 | M&L for repair to aluminium door / window / ventilators by rescuring or easing & adjusting, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, handles, hinges etc area n.exc 2.00 sqm each complete all as specified and directed. |
| 44 | M&L for repair to steel window / ventilators by rescuring or easing & adjusting, welding, necessary mild steel fittings such as peg stays, handles, hinges, locking arrangement etc area n.exc 2.00 sqm each complete all as specified and directed. |
| 45 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 46 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 47 | M&L Sheet glass of thickness 4.8mm, ordinary quality and glazing in aluminium shutter in square exc 0.5 sq. m in each pane complete all as directed. |
| 48 | S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified |
| 49 | Supply and fixing 35mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including mouldingsfixed to chowkats, complete all asspecified. |
| 50 | Supply and fixing 2nd class hardwood 35 mm thick factory made glazed and skelton shutters to receive glass/ gauge ofwith sash bars for windows/ventilators fixed in position complete all as specified in SSR Part-I Sec 8 clause 8.20(B) complete all as specified. |
| 51 | S&F galvanised mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 52 | M&L for preparation of new wood or wooden based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 53 | S&F in repair of 25 dia stainless steel curtain rods inclfunnel horns, l bracket and middle support,end caps etc all as directed by Engr in Charge. |
| 54 | M&L for preparation of old surface of wall of any description and applying one coats of oil bound distemper including filling putty or white cement to holes, cracks and uneven surfaces etc as required and making good approved by Engr-in-Charge complete all as specified. |
| 55 | M&L for preparation of old surface of ceiling of any description and applying one coats of white wash by filling putty or white cement to holes, cracks and uneven surfaces etc as required and making good approved byEngr-in-Charge complete all as spfd. |
| 56 | M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed |
| 57 | M&L for preparation of old painted steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed |
| 58 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specifiedand as directed |
| 59 | M&L for granite (of any type)20mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills\" cooking plateform and like in cement mortar (1:4)including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed bedding layer of 15 mm thick in CM 1:4 complete all as spfd. and polishing complete. |
| 60 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 61 | M&L non-skid coloured ceramic tiles(Square/Rectangular) area of each tile exceeding 0.11 sqmbut not exc. 0.18 sqm ,7-8 mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:6 complete all as spfd. colour and design approved by Engr-in - Charge,Make:-Somany,Kajaria,Nitco |
| 62 | M&L for Glazed ceramic tiles in vertical surface 300x 450x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM-1:4 complete all as directed. |
| 63 | M&L colouredvitrified tiles (light shade) 10 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry over and including 15mm thick screed in CM-1:6 complete all as directed. |
| 64 | M&L colouredvitrified tiles (light shade) 10 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in vertical surface or skirting etc set and jointed in neat cement slurry over and including 10mm thick rendering in CM-1:4 complete all as directed. |
| 65 | Taking down shutters of any description from the frames and refixing in thesame opening after repair of door rescuring or easing & adjusting etc , area n.exc 2.00 sqm each complete all asspecified |
| 66 | Dismantling boarding any description fixed in any position with nails / screws complete all as specified. |
| 67 | S&F 18mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screw to timber/steel frame work, including 1mm thick PVC moulding all around including edging, complete all as specified and as directed by Engr-in-charge. |
| 68 | S&F 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood beading fixed on edge of board, fixed with screws to timber/steel frame work complete all as directed. |
| 69 | M&L for .90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions complete all as specified and as directed. |
| 70 | S&F continuous (piano) hinge, mild steel, bright finish or electrogalvanised 30mm wide fixed with screw complete all as specified. |
| 71 | S&F stainless steel anti rust hydraulic auto soft closing hinges fixed to wooden frames/shutters in cupboard all as specified and directed by Engr-in-charge |
| 72 | S&F drawer side telescopic channel of standard size of standard length, inclusive of roller for moving drawer, mild steel bright finish or electrogalvanised width of flap 30mm (ISI Marked), complete allas specified and directed by Engr-in-Charge.Make:- Godrej, KIZONE, EBCO |
| 73 | S&F stainless steel magnet catcher of size 55mmx30mmx15mm for wooden pannel, complete all as specified and as directed by Engr-in-charge. |
| 74 | S&F 100mm brass handles, cast type, polished bright complete all as specified and as directed by Engr-in-charge. |
| 75 | S&F for rolled sections as in framing for cladding or chow of cupboard, glazing and the like fixed with angle cleats and connecting plates, etc. confirming to Fe 410-W (Gde-E-250) quality-A complete all as directed. |
| 76 | S&F 4.8mm thick sheet glass ordinary quality in square nexc 0.50 Sqm each pane fixed in two track aluminium frame as in cupboard incl roller to move glass complete all as directed. |
| 77 | M&L for preparation of new steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed |
| 78 | Taking up or down steel tubing & connections, incl cleaning for refixing etc for 15mm dia pipe. |
| 79 | Taking up or down steel tubing & connections, incl cleaning for refixing etc for 20mm dia pipe. |
| 80 | M&L tubes medium grade galvanized with all fitting and fixed complete to walls or laid in floors for 15mm bore pipe. Make:- jindal,BST, Tata |
| 81 | M&L tubes medium grade galvanized with all fitting and fixed complete to walls or laid in floors for 20mm dia bore pipe. Make- Supreme, finolex, kisan |
| 82 | S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed after cutting of existing pipe in roof and wall supporing pipe incl necessary arrangements like union, nipple etc complete all as directed. |
| 83 | S & F in repair Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted / erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 complete all as specified. |
| 84 | S/F in repair Vitreous china wash down water closetPan (pedestal Pattern) white (excluding fixing bolt ,flushing cistern and flush pipe size 580 x 440 mm white with integral foot rest connecting flushing cistern and flush pipe complete all as specified and as directed. Make:- Cera, Essco, varmora |
| 85 | S & F in repair seat and cover for pedestal pan white/black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device complete all as specified and as directed. |
| 86 | S&F in repair PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. Make: - Cera, Jaquar, Hindustan |
| 87 | S&F in repair 15 mm bore angle valve with wall flange fency type chromium plated, screwed down, high pressure with cruth or butterfly handle Make:-CERA, Jaquar, Prima |
| 88 | S&F in repir brass chromium plated wall mixer with long bend pipe for overhead shower with built-in non return valve complete for mixing hot & cold water screwed down for iron pipe 15mm bore Make : CERA, Jaquar, Essco |
| 89 | S&F in repairs single lever sink mixer(wall mounted) with 200 mm(8\") long swivel spout connecting les and wall flanges complete all as spfd Make:- CERA, Jaquar, Kohller |
| 90 | S&F in repair two way angle cock with wall flange complete Make:-CERA, Jaquar, Prima |
