|
| 1 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel or stainless steel work of any description not otherwise provided for complete all as specified and directed. |
| 3 | Taking down chowkatsor frames withshutters (without taking off shutters from the frames exc. 1.5 Sqm and n.exc. 4.0 Sqm each complete all as specified and as directed. |
| 4 | Taking down chowkatsor frames withshutters (without taking off shutters from the frames n. exc. 1.5 Sqm each complete all as specified and as directed. |
| 5 | Taking down Chowkhats or frames exc. 1.5 sqm but n. exc. 4.0 sqm each complete all as specified and directed. |
| 6 | Dismantling of ceiling boards (fibre, pulp, insulation etc.) of any thickness, including cover fillets complete all as specified and as directed. |
| 7 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital orsimilarpattern as in rainwater gutter / roof coverings complete all as specified and directed. |
| 8 | Taking down cement plaster any descriptionon brick or stone walls,roof plaster etc including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed. |
| 9 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplied and fixing in the frame at site as per specification & drawing shown in the SSR Part - II 2020complete all as specified and as directed. |
| 10 | Resecuring or easingand adjusting without taking down of shutter of any description exc 1.0 sqm and n.exc 2.0 sqm each including necessary screws and finishing the surface complete all as specified and as directed. |
| 11 | Taking down and refixing in the same opening of shutter of any description exc. 1.0 sqm and n.exc. 2.0 sqm each including necessary screws and finishing the surface complete all as specified and as directed. |
| 12 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown in the SSR Part - II 2020 complete all as specified and as directed. |
| 13 | S&F 1st class hard wood Plain, solid, straightchowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints,suppliedandfixed complete all as specified and as directed. |
| 14 | S&F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreatedcomplete all as specified and as directed. |
| 15 | S&F 100mm longExtruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified and as directed. |
| 16 | S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and fixedcomplete all as specified and as directed. |
| 17 | S&F300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and irected. |
| 18 | S&F 150mm longExtruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 19 | S&F aluminium alloy wire cloth 0.45 mm nominal dia ofwire & average width of aperture 1.40mm and fixed with wooden beading and tinned tackor galvanised wire staples complete all as specified and directed. |
| 20 | S&F in repairs 150mm long aluminium anodised, barrel tower bolts of extruded section and fixedcomplete all as specified and as directed. |
| 21 | S&Fanodised aluminium frame for doors, windows, ventilators with or more rebates including joining cleat for fixing etc.complete all as specified and as directed. |
| 22 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified and as directed. complete all as specified and as directed. |
| 23 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.)complete all as specified and as directed. |
| 24 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and as directed. |
| 25 | Repairs to Aluminum window replacingof worn out friction hinges and tightening of cornerscomplete all as specified and as directed. |
| 26 | Repairs to alumunum door shutters as touching on floor by removing the shutter and replacing the defective hinges, tightening all screws complete for free movement of shutterscomplete all as specified and as directed. |
| 27 | S&F in repairsFloor door stopper (ISI Marked) 150mm long over all length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorcomplete all as specified and as directed. |
| 28 | S&F 100mm long Butt hinges, medium weight, cold rolled stainless steel, and fixedcomplete all as specified and as directed. |
| 29 | S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 30 | S&F in repair for Aluminium extruded section body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed |
| 31 | M&L for 18 to 20 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed. |
| 32 | S&F in repair for 15mm bore Chromium plated Fancy type Bip taps, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 33 | S&F in repairs for 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 34 | S&F in repairs for 15mm bore fancy type stop valves cast copper alloy, screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixedcomplete all as specified and as directed. |
| 35 | S&F in repair for 20mm bore gunmetal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and as directed. |
| 36 | S&F in repairs for 25mm bore ball brass valves, high pressure, with polyethylene float and flynut complete, screwed for brass ferrule complete all as specified and as directed. |
| 37 | S&F in repairs vitreous China wash basin (WHB) of size 550mmX400mm white flat back, tap waste chain and plug and porciline stopper but incl bracketscomplete all as specified and as directed. |
| 38 | S&F in repair for 15mm bore CP pillar tap cast copper alloy fancy type swan neck screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 39 | S&F in repairvitreous china wash down water closet pan EWC(pedestal pattern) white (excluding flushing cistern and flush pipe) with P or S trap and including plastic water closet seat cover white, closed pattern with flat bottom and cover including connection to drain and flushing pipe etc complete all as specified |
| 40 | S&F in repairs for 10litre capacity low level flushing cistern, moulded from virgin poly propylene, singleflush ISI marked complete all as specified and as directed. |
| 41 | S&F in repairs for plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hanging devicecomplete all as specified and as directed. |
| 42 | S&F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and as directed. |
| 43 | M&L in repairs for 600mmX 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial pvc and fixed to walls with CP brass screws and washerscomplete all as specified and as directed. |
| 44 | S&F in repair for Chromium plated shower roseswith or without swivel joints, 125mm size, including fixing to steel pipe or unioncomplete all as specified and as directed. |
| 45 | S&F in repair for Soap holder dish, approximate size 160 x 160 x 90mm,any type, fixed to plugs with chromium plated brass screwscomplete all as specified and as directed. |
| 46 | M&L 15mm nominal bore mild steel galvanised water tubing, medium grade (ISI) marked, with all fittings and fixed complete to walls and ceiling or laid in floors including existing Taking up or down complete all as specified and as directed. |
| 47 | M&L 20mm nominal bore mild steel galvanised water tubing, medium grade (ISI) marked, with all fittings and fixed complete to walls and ceiling or laid in floors including existing Taking up or down complete all as specified and as directed. |
| 48 | S&F in repair for PVC waste coupling of 40mm dia half or full threaded of min weight 60gmcomplete all as specified and as directed. |
| 49 | S&F in repair for PVC connections 15mm dia size with PTMT nuts and washersfor 600mm long pipe complete all as specified and directed. |
| 50 | S&F in repair for 32 to 40 mm size 600mm long PVC waste pipe complete all as specified and as directed. |
| 51 | S&F in repair for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangementcomplete all as specified and as directed. |
| 52 | M&L for Glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding backing coat of 10mm thick in cement mortar (1:4) rendering for laying of wall finishes complete all as specified and as directed. complete all as specified and as directed. |
| 53 | M&L for Glazed ceramic coloured tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding backing coat of 10mm thick in cement mortar (1:4) for laying of wall finishes complete all as specified and as directed. |
| 54 | M&L for Vitrified Ceramic coloured tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm and not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM (1:6)complete all as specified and as directed. |
| 55 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM (1:6)complete all as specified and as directed. |
| 56 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM (1:6)complete all as specified and as directed. |
| 57 | M&Lfor preparation of newwooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 58 | S&F for rotational moulded poly-ethylene water storage tanks (ISI marked) (cylinderical vertical with closed top) 1000 litres capacity in white colour, hoisted and fixed in position with 25mm bore ball brass valves including taking down existing complete all as specified and as directed. |
| 59 | S&F rotational moulded poly-ethylene water storage tanks (ISI marked) (cylinderical vertical with closed top) 500 litres capacity in white colour, hoisted and fixed in position with 20mm bore ball brass valves including taking down existing complete all as specified and as directed. |
| 60 | S&F in repair for 150mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 61 | S&F in repair for 150mm PVC (SWR) bends any radius ccomplete all as specified and as directed. |
| 62 | S&F in repair for 150mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 63 | Disconnecting of exc. 250L and n.exc. 500L existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes complete all as specified and as directed. |
| 64 | Disconnecting of exc. 500L and n.exc. 1000L existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes complete all as specified and as directed. |
| 65 | Cleaning and removing of all scale and dirt, etc, from tanks and from mouths of circulating pipes for 1000 Litre capacity water tanks complete all as specified and as directed. |
| 66 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth (witthout using extra cement) including mixing with water proofing compound mixed as per manufacturers instruction complete all as specified and as directed.Note :Water proof compound shall be measured and paid separately under relevant itemas supply only. |
| 67 | Supply only liquid water proofing compound |
| 68 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application as per manufacturer\"s specification complete all as specified and as directed. |
| 69 | M&L for10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. |
| 70 | M&L for Preparing newlyplasteredsurfaces of walls and applying two coats ofdistemper oil emultiononwalls over a coat of primercomplete all as specified and as directed. |
| 71 | S&F Pre- painted galvalume aluminum zinc coating AZ150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 72 | S&F Pre-painted galvalume aluminum zinc coating AZ150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/rain water gutter/valley gutter/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 73 | S&F Plain, Aluminium sheeting of thickness 0.71mm , Alloy 31000H4 in ridges, hips, valley gutter,drip and straight flashing (length and girth as fixed with necessary nut bolts, GI hoocks with washers for leak proofing) complete all as specified and as directed. |
| 74 | S&F for AC plain building board 6mm thick ceiling fixed with size of grid 605X605mm GI frame work for seamless ceiling comprising of GI perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.with Hangers 6 mm dia. G.I. complete all as specified and as directed. |
| 75 | S&F Steel work in tubular trusses, columns etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 as in column, truss, purlins etc complete all as specified and directed. |
| 76 | S&F for mild steel works in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if requiredand similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 77 | M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and as directed. |
| 78 | Cleaning of roof valley gutter completely by removing debris, leaves, grass etc upto three floors including removing and disposing the same at the place meant for disposal of waste material outside the defence area complete all as specified and directed. |
| 79 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n. exc. 15cm thick.(Below or above ground level) complete all as specified and directed. |
| 80 | Demolition of cement concrete Reinforced (reinforcement cut as required to facilate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 81 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillors, etc but excluding aslar facing , dressed stonework and precast concrete articles built in cement mortar complete all as specified and as directed. |
| 82 | Dismantling of Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed. |
| 83 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: 1. M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. 2. For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 84 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. Note:1. stainless steel butt hinges and necessary S.S screws shall be measured and paid separately under relevant item. |
| 85 | S&F 35mm thick Glazed andskeleton shutters, divided in to squares with plain, chamfered or rounded open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats complete all as specified and as directed. |
| 86 | S&F 4mm thickness Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 87 | M&L for 18 to 20 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face complete all as specified and as directed. |
| 88 | S&F in repairs 75mm Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 89 | M&L for granite (of any type) 20mm thickwork ( table rubbed and polish to mirror finsh) in a steps, jambs, pillers, window sills, cooking platform with half-round molding andlike in cement motor (1:4) including pointiong in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick cement mortar CM 1:4 complete all as as specified and directed. |
| 90 | M&L Reinforced cement concrete in type B1 1:2:4 (using 20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and kitchen platforms complete all as specified and as directed. |
| 91 | Use and waste steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, kitchen platforms and similar work; not exceeding 200mm thick for fair finished surfaces of complete all as specified and as directed. |
| 92 | S&F mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking for slabs ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 93 | S&F in repairs vitreous china squatting pan “Orissa pattern\" size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bed, making good the disturb surface complete all as specified and as directed. |
| 94 | S&F in repair for sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 95 | S&F in repair for stainless steel plate rack 1mm thick weight not less than 7kg/each of size 75cmx75cmx25cm or of nearby size as approved by GE complete all as specified and directed |
| 96 | M&L for precast cement concrete solid block masonry exc 10cm in width using PCC 1:3:6 type C-1 (using 20mm graded aggregate) set in cement mortar 1:6 complete all as specified and directed |
| 97 | M&L for10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed. |
| 98 | M&L for Plain cement concrete C-1 type 1:3:6 (20mm graded aggregate)75mm thick as in plinth protection all as specified and directed. |
| 99 | M&L for 40 mm thick plain cement concrete (1:2:4) type B1 (20mm graded stone aggregate) finished thesurface even and fair complete all as specified and directed. |
| 100 | S&F Venetian/vertical blinds with syntheticfabric strips and GI poweder coated frame including opening/closing devices vertical including contolling ropes and bottom weight in any colour and pattern complete all as specified and directed. |
| 101 | S&F Venetian/vertical blinds with wooden fabric strips and GI poweder coated frame including opening/closing devices vertical including contolling ropes and bottom weightin any colour and pattern complete all as specified and directed. |
| 102 | Cleaning and removing of all scale and dirt etc from tanks and from mouths circulating pipes for 500 Ltrs capacity water tanks complete all as specified and as directed |
