|
| 1 | Taking down door/window frames with shutters (without taking off shutter from the frame) not exc. 1.5 Sqm complete all as specified. |
| 2 | Taking down shutters of any descriptionexe 1 sqmbut not exc.2.0 Sqm each complete all as specified. |
| 3 | S&F solid PVCdoor frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drg complete all as specified. |
| 4 | S&F factory made solid panel PVCdoor shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colourPVC \"C\" channel having a PVC sheet strip of 20mm wide stuck in side with solvent cement for stiles and wood grain printed sheet for toprail & bottom rail. Paneling of wood grain sheet for top rail lock rail & bottom rail. Paneling of wood gren printed sheet to be fitted in the MS frame welded/sealed to stiles and rails with 5mm thickx15mm wide PVC sheet beading used inside styles & rails and decorated PVC beading of 10mmx10mm (90)used and jointed to gather with solvent cement supplying & fixing in the framecomplete all as specified. |
| 5 | S&F rolled section as in framing for door/vent/CBchowkats and Gates etc conforming to Fe-410-w (Gde E-250) quality A and the like fixed with angle cleat and connecting plates complete all as specified. |
| 6 | Supply and fixing butt hinges 100mm long medium weight cold rolled MS fixed to pressed steel/angle iron frames by welding complete all as specified. |
| 7 | S&F aluminium handle cast type anodized 125mm complete all as specified. |
| 8 | S&F 200mm long MS barrel tower bolt, stove enamelled black, with bright bold complete all as specified. |
| 9 | M&L powder coatedaluminiumventilator, openable top hung and bottom portion fixed typewithout sash bars withaluminiumsection w eight 0.55 kg /m including necessary joining cleats,glaging clips,rubber packing, anodized, aluminium snap beading,screws and top hung shutter fixed hook & eye minium one nos each shutter including one nos aluminum tower bolt 100 mm longaluminium butt hinge 75 mm long 02 Nos and 75 mm longaluminum handle in each shutter etc. (glasspanes /wire mesh shall be measured andpaid separately) complete all as specified. |
| 10 | S & F anodised aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 11 | Supply and fixing 4mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified. |
| 12 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises complete all as specified. |
| 13 | M&L glazed ceramic coloured tiles size 450x300x7mm thick in walls etc set and jointed in neat cement slurry and pointing in white cement mixed with pigment to match over and including 10mm thick rendering in CM 1:4 complete all as specified. |
| 14 | M&L non skid ceramic coloured tiles 400x400x7 to 8mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match incl screed bed of 15mm thick in CM (1:6) for laying floor tiles complete all as specified. |
| 15 | Demolition of cement concrete unreinforced in floor incl tiles in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified. |
| 16 | Supply only water proofing compound ISI marked complete all as specified. |
| 17 | M&L water proofing treatment to roof slab & sunken portion with APP modified polymeric membrane centre core 100 micron HMHDPE outer film 20 micron each havingweight not less than 3 Kg/sqm with 100mm overlap laid as per manufacturers instructions.It shall be laid by torching application complete all as specified with following courses of descriptions below :-(a) Applying evenly a coat of bituminous primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm on prepared surface till the surface is properly impregnated.(b) Second coat of bonding material using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 Kg per Sqm.(c)Third course ie laying of APP modified membrane described hereinbefore with 100mm over lap in longitudinal direction and 100mm in transverse direction all joints and changes in all directions should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and curved well before alying the membrane.(d) Forth coat bonding material using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 Kg per Sqm. |
| 18 | M&L for cement concrete type B1 (1:2:4 ) using 20 mm graded stone aggregate as inpadding, roof kerb incl hunching, benching etc RCC pillar, Beam andsunken portion area etc complete all as specified. |
| 19 | M&L PCC (1:3:6) type C-2, using 40mm graded stone aggregate, 75mm thick finished even & smooth without using extra cement complete all as specified. |
| 20 | M&L 25mm thick PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in floor complete all as specified. |
| 21 | Taking down cement plaster of any description on bricks walls etc, including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified. |
| 22 | M&L for 15mm thick rendering in CM (1:6) on fair faces of brick/concrete finished even and fair without using extra cement complete all as specified. |
| 23 | M&L for 15mm thick rendering in CM (1:4) on fair faces of brick/concrete finished even and fair without using extra cementcomplete all as specified. |
| 24 | M&L for Rendering 15 mm thick in CM (1:4) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing (mixed with WPC) complete all as specified.Note:- WPC shall be supplied and paid separately. |
| 25 | M&L two coatsof cement base paint on newly plastered surfaces of walls over a coat of primerincludingpreparation of surfaces complete all as specified. |
| 26 | M&L Preparation of newly plastered surfaces of wall & applying three coatsof white wash complete all as specified. |
| 27 | M&L preparation ofold decorated plastered surfaces of walls etc by complete removal of existing treatment incl washing rubbing down and stopping and applying two coats of cement base paint over a coat of primer on wall surfaces etc complete all as specified. |
| 28 | M & L Preparation of old decorated plastered or undecorated plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots andapplying one coat of white wash complete all as specified. |
| 29 | Demoltion of brick work built in cement mortor including all quoins, arches, pillars etc complete all as specified. |
| 30 | M&L brick work with subs class \"B\" bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified. |
| 31 | M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on newsteel surfaces over 10CM width or grith includingpreparation of surfaces complete all as specified. |
| 32 | M&L painting one coat of synthetic enamel painton old steel surfaces of grith over 10CM width or grith, includingpreparation of surfaces complete all as specified. |
| 33 | Taking up or down steel water tubing and connections 15mm borecomplete all as specified. |
| 34 | All as item No. 33 above but 20mm bore pipe complete all as specified. |
| 35 | M&L 15mm bore GI tubing medium grade ISI marked with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified. |
| 36 | All as item No 35 above but 20mm bore tubing complete all as specified. |
| 37 | Demolition and breaking up drain pipes (SGSW, AC or reinforced cement) set in cement mortar internal dia of pipe 100mm complete all as specified. |
| 38 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified. |
| 39 | Dismantling of cast iron drain pipes & fittings, jointed in cement mortar internal dia of pipe 75 mm complete all as specified. |
| 40 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified. |
| 41 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified. |
| 42 | S&F 75mm bore PVC (SWR) bends any radius complete all as specified. |
| 43 | S&F tubular towel rails 20mm dia, D type 60mm long between flanges of aluminum anodized complete all as specified. |
| 44 | S&F PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete all as specified. |
| 45 | Dismantling and taking down of water storage tank capacity 500 ltrs of PVC etc complete all as specified. |
| 46 | Supply and fixing 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) of three layer hoisted and fixed in position complete all as specified. |
| 47 | S&F in repair bib taps cast copper alloys with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified. |
| 48 | S&F in repairchromium plated 15mm borestop valve /Angle valve cast copperalloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 49 | S&F in repairchromium plated 15mm bore stop concealed type valve cast copperalloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 50 | S&F PVC Connection 15mm size with PTMT nuts and length 450m complete all as specified. |
| 51 | S&F ball valve high pressure of PTMT with epoxy coatedaluminium rod & high density plastic ball screwed for iron pipe20 mm dia complete all as specified. |
| 52 | S&F brass chromium plated shower rose 75 mm dia and includingswivel arm of 15 mm bore complete all as specified.Make :- Hindware Cat Part No - F 160004 or equivalent in L&K / Plumber. |
| 53 | S&F in repair pillar tap, cast copper alloy with capstan heads,chromium plated,fancy type screwed down high pressure, with or without lettered\"Hot\" or \"Cold\"with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified. |
| 54 | M & L wall hung wash basin of size565 X420X210 mm alongwith pedestal with fixing accessoriesall as directed by Engr-in-charge make -jagour Cat Part No.FLS-WHT-5801 or equivalent of Hindware/parryware etc complete all as specified. |
| 55 | M&L fixing to Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified. |
| 56 | S&F Soap Dish Holder complete all as specified. |
| 57 | S&F for Corner Glass Shelf (with Bracket complete all as specified. |
| 58 | S&F 600x 450mm bevelled edge mirror of slected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass, screw and cup washers complete all as specified. |
| 59 | M&L salt glazed stone ware gully traps 150x150mm , square mouth \"P\" type complete all as specified. |
| 60 | M&L cast iron Nahani trap 75mm out let dia with grating incluiding jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified. |
| 61 | S&F as in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580mmx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etcincluding provision of PCC (1:7:12) type F2 in filling complete all as specified. |
| 62 | M&L for 60mm thick & M-35 factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over and inluding 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 63 | S & F Fe 410-W (Gde E-250)) quality B rolled mild steel in Joist channel, angle or tee,I sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e, within 20mm of the length indicated) complete all as specified. |
| 64 | Taking down door/window frame with shutters (without taking off shutter from frame) exceeding 1.5 Sqm but not exceeding 4.00 Sqm each complete all as specified. |
| 65 | Providing and fixing made single extruded WPC (Wood Polymer Composite) solid decorative type door/window/Ceosetory windows & other Frames/Chowkhat of size 125X63mmcomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2300 N (Face) & 1800 N (Edge), minimum compressive strength of 59 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and GRIHA certified. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive and fixed in position with M.S hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). The manufacturer should be ISO 9001:2015 Quality Management System Certification and ISO 14001:2015 Environmental Management Systems with in-house testing facility and should have their own manufacturing plant in India complete all as specified. |
| 66 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type 35mm flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and GRIHA certified. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). The manufacturer should be ISO 9001:2015 Quality Management System Certification and ISO 14001:2015 Environmental Management Systems with in-house testing facility and should have their own manufacturing plant in etc complete all as specified. |
| 67 | S&F Aluminium extruded section body door closer hydraulicallyregulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 68 | S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified. |
| 69 | M&L for Vitrifiedceramic tiles and including 10 mm thick (Square/rectangular) area of each tilenot exceeding 0.36 sqm ,over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in colouredcement to match complete all as specified. |
| 70 | Dismantling of stone slab and tiles of any description or thickness in floors, etc complete all as specified. |
| 71 | M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in over and including 15mm thick screed bed in cm 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 72 | Providing and laying cool roof tiles 600x600mmx8mm thickness, as per manufacurer instruction in required combination of themes, with water absorption less than 3% and of approved make, in any colours and shades, laid on 15 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete all as specified. |
| 73 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation, boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 74 | Supply and fixing anodized snap grid frame work of size 605mm x 605 mm for false ceiling including necessary notching. The snap grid shall consist of anodized aluminium main & cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/RM and 23.5 x 26.4 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminum angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall besupported at ends all along the wall with anodized aluminum angle of size 40 x 25 x 2 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick mineral fibre board of fixed in grid support with 2.50 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of aluminum as per specification complete all as specified. |
| 75 | M&L for screed bed or bedding layer 20 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufactoring instruction, finished even and smooth without using extra cement over cement slurry @3% over existing roofcomplete complete all as specified.Note:- WPC Shall be measured and paid seperatly |
| 76 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, over a coat of primer over 3mm thick wall care putty onwalls complete all as specified. |
| 77 | M&L preparation of old decorated plastered surfaces of walls etc complete removal of existing treatment incl washing rubbing down and stopping and applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty complete all as specified. |
| 78 | M&L painting two coats of synthetic enamel paints over a coat of pink primer on new wooden surfaces over 10CM width or girth, includingpreparation of surfaces complete all as specified. |
| 79 | M&L painting one coat of synthetic enamel painton old wooden surfacesover 10CM width or girth, includingpreparation of surfaces complete all as specified. |
| 80 | S & F Fe 410-W (Gde E-250)) quality B rolled mild steel in Joist channel, angle or tee,I sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e, within 20mm of the length indicated) complete all as specified. |
| 81 | Dismantling of Stone Jali & Stone Pillar of any description , any thickness complete all as specified. |
| 82 | M&L for 40 mm thickSikandra stone jali decorative design of approved pattern including all carving and moulding of corners fixed in cement mortar 1:4 to grooves of stone pillars application with colouring to match with colour of jali including fixing of stone jali for all corners & lift complete all as specified. |
| 83 | S&F stone pillars(post) of size 100x100 mm including engraving decorative design of approved pattern on two faceand dome shape approved by GE , height of each post as per sikandra jali, ,making groove on two face of size 43x5 mm for fixing of sikandra Jali in CM 1:4 complete all as specified. |
| 84 | M&L for 40 mm thick stone of approved quality for Chajja wherever required as per approved design, incl cost of inserting/fixing of stone.Item includes cost of material, safety measures/use of specifieed equipment for workers of building rquired to complete the 6m heights & incl all leads complete all as specified. |
| 85 | M&L for sand stone slabs 7.5cm thick in sun shades, lintel stone, shelves, cills, landings, cover stones, templates, etc n.exc 3m in length, punched dressed on face and along exposed edges, self faced on other side and set in lime mortar :2 or cement mortar 1:4 complete all as specified. |
| 86 | M&L forfixing 50 mm. to 75 mm. thick Dholpur slab in floor/roof set in 20 mm thick (avg.) cement mortar (1:2) bed and pointing with cement mortar (1:2)(cement 1, stone dust 2) with admixture of pigment matching the stone shades, rough chisel dressed all complete all as specified. |
| 87 | S&F stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified. |
| 88 | S&F 50mm bore Tubes,\"Medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified. |
| 89 | S&F Fe 410 -W (Gde- E- 250) quality-A Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections complete all as specified. |
| 90 | M&L Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow, complete all as specified. |
| 91 | Supply and fix wooden flooring \"Maple wood\" for indoor Badminton court.Floor treated with a vapour barrier to be placed on the levelled before laying the under frame.The runners having air cushion pads to be placed on the vapour barrier in perfect level in one direction.The surface board to be screed to be runner through the tongue only and will lock the screwed tongue by the grooove of adjoining board ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive.The expansion of 2-5mm will be left open between the wooden flooring and surrounding tiles area.After installation of the floor will be machine sanded in uniform level and finished with PU polishing water based polyurethane lacquer complete all as specified. |
| 92 | Taking down carefully unserviceable point wiring of any type & pattern (Light/Fan/Socket or power) including unserviceable fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etcand making good disturbed surfaces of walls/ roof etc complete all as specified. |
| 93 | Taking down complete main switches/DBs with enclosure and its components of any size and capacity etc complete all as specified. |
| 94 | M & L for concealed point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor, ISI marked drawnin and including PVC conduit (minimum 20mm dia) concealed in wall etc (also including cutting chiseling in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch complete all as specified.Note: Modular flush box and inner/outer plates measured and paid separately. |
| 95 | All as per item No. 94 above but for One 2pin/3 pin socket outlet 5 Amps on independent board. |
| 96 | Alll as per item No. 94 above but for One 2pin/3 pin socket outlet 5 Amps on same boardwith other switches , complete all as specified and directed. |
| 97 | M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductorFRLS with and in and including PVC concealed conduit having thickness not less than 2 mmwith all fittingsincluding 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductorFRLS as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping andmaking good disturbed surface areaand white wash/colour wash to matching existing colour and complete all as specified. Note: colour coding is to bemaintained . Note: Modular flush box and inner/outer plates measured and paid separately. |
| 98 | M&L for ceiling rosethree terminals AC 240 volts 50Hz complete all as specified. |
| 99 | M&L for switch modular one way 6/5 amps 1 module completeall as specified. |
| 100 | M&L for switch modular one way 16/20 amps 1 module completeall as specified. |
| 101 | M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified. |
| 102 | M&L for socket modular 16/20 Amp 2/3 pin combined 2 module complete all as specified. |
| 103 | Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 8 way double door with din rail and 200 Amp bus bar complete all as specified. |
| 104 | Supply and fix in repairs MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified. |
| 105 | Supply and fix in repairs MCB SPN 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified. |
| 106 | Supply and fixing modular metal flush box 1/2 module complete all as specified. |
| 107 | Supply and fixing modular metal flush box 3 module complete all as specified. |
| 108 | Supply and fixing modular metal flush box 6 module complete all as specified. |
| 109 | Supply and fixing modular metal flush box 8 module complete all as specified. |
| 110 | Supply and fixing modular white cover plate with frame 1/2module complete all as specified. |
| 111 | Supply and fixing modular white cover plate with frame 3module complete all as specified. |
| 112 | Supply and fixing modular white cover plate with frame 6module complete all as specified. |
| 113 | Supply and fixing modular white cover plate with frame 8module complete all as specified. |
| 114 | Material and Labour fortube light fittingLED 20 watt with decorative end caps made out of CRCA sheet powder coated complete with housingwith aluminium heat sink on back of LED ,PF>0.90, LED light luminous efficiency shall not be less than 90 Lumens/Watt and the colour rendering index shall not be less than 70 and Correlated Colour Temperature is 6500K and light should complying ISI and BIS marking ,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as specified. |
| 115 | S & F Lamp holder, PVC/polycarbonate type with cord grip cap suitable for pendant fitings complete all as specified. |
| 116 | Supply and fixin repairs highly efficient high power 35 W LED street light fitting with pressure die cast aluminium housing reflector and enclosed with heat resistant toughened glass IP66 protection AC 240 Volts 50 HZ refractive lens with suitable electronic drive PF > 0.9 complete including taking exiting unserviceable street light fitting complete all as specified. |
| 117 | M& L for Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to connected to galvanised earth lead wire 4.0mm diaby means of bolts, nuts and washers protected by GI tubing light grade 40 mm dia uptoTest point 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm complete all as specified.( Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and GI wire shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI wire beyond 7.5) will be measured separately under respective item. |
| 118 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame , connected items etc complete all as specified. |
| 119 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, anchor fastner Bolts etc complete all as specified. |
| 120 | Supply and fix in repairsHot and Cold water stainless steel connecting pipe 2ft long with Connecting bolt 15mm diaISI Marked complete all as specified. |
| 121 | S & F street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified. |
| 122 | Supply and fixingin trenches for suction pipe jointing GI tubing medium grade 25 mm dia including all fittings such as bends elbows tees union short pieces connectors check nuts caps plugs etc for thesizes complete all as specified. |
| 123 | Supply and fix in repairs gun metal gate valve with iron wheel head screwed both ends for iron pipe for 25 mm complete all as specified. |
| 124 | Taking down submain wiring any size complete all as specified. |
| 125 | Supply & Fix switch piano single poleflush type 5/6A,240 Vone way complete all as specified. |
| 126 | Supply & Fix switch socket combination 2 in 1 ,5Amps multipurpose flush type complete all as specified. |
| 127 | Supply & Fix switch socket combination 2 in 1,3 pin, 5 and 15 Amps flush type universal complete all as specified. |
| 128 | Supply & fix Air Circulator fans metal body 230 volts single phase oscillating 450 mm sweep heavy duty suitable for wall mounting fan with connected accessories complete all as specified. Make Almonard/Bajaj/Havells |
| 129 | M & L for Cutting holes into or through brick walls builtin cement mortar for fixing the Exhaust fan and making good the distrubed surfaces in cementmortar 1:3 complete all as specified. |
| 130 | Supply & Fix MCB DB Double Door SPN 12 way 240 volts, including cutting chasis in wall, concealing the DB in wall, making good the distrubed surfaces and making connections complete all as specified. |
| 131 | M&L for MCB SPN, 240 volt,40 to 63 Amps, 16 KA complete all as specified. |
| 132 | M&L forsubmain wiring in and including PVC conduit having thickness 1.8mm, 20/25 mm diawith tworun of PVC insulated, sheathed multistranded copper conductorof 6 sqmm (FRLS) and one run of PVC insulated, sheathed multistranded copper conductor6 sqmm (green in color) for earth continuity conductorand connected to common earth dolly withthimble etc, cutting chiseling for concealed piping and making good the disturbed surface area white wash/colour wash to matching with existing colour complete all as specified and directed. ( Note: Two run of 6 sqmm plus one run 6 sqmm of earth wire will be measured as 1RM) including dismantling of existing unserviceable submain wiring complete all as specified. Note: colour coding is to be maintained. |
| 133 | Supply and fixingin repairs highly efficient high power multi LED flood fitting 100 watts with pressure die castaluminium housing reflector and enclosed with toughened glass IP66 complete prewired and connecting with 1.0 sqmm 3 core flexible wire including fixing arrangement on wall etc complete including dismantling of existing unserviceable flood light fittings complete all as specified. |
| 134 | M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in and including PVC casing and caping double locked box type with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the surface of wall/ceiling by means of PVCsleeved/dash fastners with cadmium plated screws including suitable size of PVC boards for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated FRLS unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly for the following :- |
| 135 | (a) One fan point controlled by one way switch. |
| 136 | S&Fceiling fan (white) of 1200 mm sweep, 5 star ratingcopper wound with super energy efficient BLDC motor including remote,connecting wire PVC insulated twisted flexible0.5 sqmm copper conductor canopy set, down rod, shackle kit, including all standard accessories complete all as specified. |
