|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.(a) Group C |
| 2 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 4 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. (a) Group C |
| 5 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (a) 2 x 1.5 + 1 x 1.5sq.mm |
| 6 | 2 x 4 + 1 x 4 sq. mm |
| 7 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (a) 20 mm |
| 8 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.. (a)5/6 A switch |
| 9 | (b) 3 pin 5/6 A socket outlet |
| 10 | Supplying and fixing 230 V 50 Hz 5 stepped type electronic fan regulator (Anchor deluxe) on the existing switch box including connections etc. as required. |
| 11 | Supply and fixing following size/modules, GI box alongwith modular base and cover plate for modular switches in recess etc. as required i) 2 modules |
| 12 | 6 Module |
| 13 | 8 Module |
| 14 | 12 Module |
| 15 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 16 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 17 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 18 | Supplying and fixing PVC batten/ angle holder includingconnections etc. as required. |
| 19 | Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. |
| 20 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (a) 8 way (4 + 24), Double door |
| 21 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts 10kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Single pole |
| 22 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 63 A |
| 23 | Supply and fixing of 1200 mm sweep, ceiling fan , class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, , Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%,all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Make as per NIT. |
| 24 | Supplying and Installation of 450 mm sweep heavy duty metallic Exhaust Fan suitable for operation on 230 V,Single Phase, 50 Hz AC Supply of1400 rpm in the existing opening,connection, testing, commissioning etc. as required.Make as per NIT. |
| 25 | supply and fixing of 25 Watts, 230 V, 50 Hz, Decorative ultra slim polycarbonate LED Tube Light fixture with high lumen output, high wattage PC Batten, environmental friendly,energy efficient ready to use pack.Make Bajaj/havells/crompton etc. |
| 26 | Supplying and fixing LED ADORE PLUS 9/10 W E27 CDL 2 Star Lamp in existing holder includingtesting etc. as required.make As per NIT. |
| 27 | 100 Amp 25 KA FPMCCBwith fixed thermal & fixed magnetic Ics- 100 %,long with neutral connectormake As per NIT. |
| 28 | Supplying and laying of 3.5 x 70 sq mm armuoured -PVC insulatedand PVC sheathed / XLPE power cable of 1.1 kV grade direct in ground excluding excavation, sand cushioning and protective covering refilling the trench etc as required .make As per NIT. |
| 29 | Supplying and laying of 3.5 x 70 sq mm armuoured -PVC insulatedand PVC sheathed / XLPE power cable of 1.1 kV grade in the existing RCC/ HUME/ METAL pipe as required. make As per NIT. |
| 30 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. A) 50 mm dia |
| 31 | Providing and fixing of 12 watt, 230 V, 50HZ,LED surface mounting light fitting inclunding making connectionetc as required. Make as per NIT |
| 32 | Providing and fixing of 34 watt ceiling mounting type 2 x 2 LED panel (down light) along with driver, in wight colour,with power coated finshed in white houssing and deliver glare-less light,complete with all accessories including connections etc. as required.make make As per NITand product No. Of havells PLUTOSURFACE2X2PLS42WLED857S. |
| 33 | Supplying and fixing of 25 Ltr capacity single phase 240 volt, 2 kw, economic, Advance three level safety, anti rust with Nano polybond Technology and alexa enabledwater heater with 5-7 years warranty on tank, 2 years warranty on heating elementincluding connection pipe , short nipple and stop cock and 3 pin 15 watt top socket, connection, testing and commissioning etc as required. make As per NIT. |
