|
| 1 | Air Walker: Providing, designing and fixing of Air-Walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 40mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using. Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with Joints scalloped as necessary and dressed off removing sharp edges and burrs Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 3mm thickness, UV resistant and colour as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer-in-charge. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of Engineer-in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc (the cement concrete and excavation work shall be included). |
| 2 | Air Swing: Providing, designing and fixing of Air-Walker of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and 2.5mm thick and rest of pipes of 40mm dia 2.5 mm thick all pipe made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with Joints scalloped as necessary and dressed off removing sharp edges and burrs Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 3mm colorful and UV resistant and enviromental friendly. Bearing used shall be maintance free dully oil sealed and self lubricated made by reputed company to be aproved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate All complete as per directions and approval of Engineer-in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc (the cement concrete and excavation work shall beincluded). |
| 3 | Horse rider station: Providing designing and fixing of horse rider station of size 1000x600x1100 mm fabricated with main post of 114mm die and 2.5mm thick and rest of the pipe 40mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall beincluded). |
| 4 | Leg Press : Providing desiging and fixing of leg press of size 2000x550x1600mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber on top end. Pedals shall be made up of Nylon alloy with rounded edge to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall beincluded). |
| 5 | Double cross walker : Providing desiging and fixing ofDouble cross walker of size 1600x600x1600mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber on top end. Pedals shall be made up of Nylon alloy with rounded edge to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free dully oil sealed and self lubricted made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall beincluded). |
| 6 | Rowing machine : Providing desiging and fixing of Rowing machine of size 1280x800x1150mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber.Foothold shall be made up of nyion alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free dully oil sealed and self lubricted made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall beincluded). |
| 7 | Providing and installation of Multi play System:- Providing and fixing of Multi play System with spiral slide-2 nos,straight Fibre slide -2 nos,Big Tunnnel Slide -1nos,Article Swing- 1 nos,Aluminium platform with canopy- 3 nos,Straight Bridge-1 nos,Step Ladder - 2 nos. its required Area 6.00mtr X 9.00mtr .The pure polyster powder coating(over baked) done on the pipe extend the life of equipments |
| 8 | Providing and installation of Merry go round :-Providing and fixing of Merry go round its required Area 3.00mtr X 3.00mtr .Total height 0.90 mtr from ground level.The pure polyster powder coating(over baked) done on the pipe extend the life of equipments and install by C.C. base system as per order by Engineer-in-charge age capacity 14 years and Seating capacity 6 childs |
| 9 | Providing and installation of Dome Climber :-Providing and fixing of Dome Climber its required Area 3.60mtr X 3.60mtr .Total height 1.80 mtr from ground level.The pure polyster powder coating (over baked) done on the pipe extend the life of equipments and Seating capacity 6 childs. |
| 10 | Providing and installation of Triple Wave Slides:-Providing and fixing of Triple Wave Slides with platform canopy its required Area 6.00mtr X 3.00mtr .Total height 2.50 mtr from ground level.The pure polyster powder coating(over baked) done on the pipe extend the life of equipments and child age up to 14 years. |
| 11 | Providing and installation of Sea Saw :-Providing and fixing of Sea Saw Double seater its required Area2.40 mtr X 1.20 mtr .Total height 0.90 mtr from ground level.The pure polyster powder coating(over baked) done on the pipe extend the life of equipments and install by C.C. base system as per order by Engineer-in-charge age capacity 14 years. |
| 12 | Providing and installation of :-Orbit ClimberArea 10feet x 7Feet x 7Feet Side Support 75MM OD Metal PipeTop Part 42MM OD Metal PipeCapacity: 04-08 Children Ladder Step 27MM OD Metal PipeHandel 27MM OD Metal Pipe |
| 13 | Providing and installation of :- Double SwingArea 10 x 6 x 8 FeetSide Frame 60MM OD PipeTop Frame 60MM OD PipeChain Powder Coated Chain 6MMCapacity: 02 Children Please Enable Macros to View BoQ information |
