|
| 1 | Dismantling brick or stone masonry in lime or cement mortarincluding cost of all labour, T&P. as required for the work etc. complete as directed by the Engineer-in-charge |
| 2 | Earth work in excavation of foundation and trenches in hard soil including moorum stoney earth and earth mixed with boulder except sheet rock and boulders requireing blasting including rough dressing & breaking colds to maximum 5cm to 7cm & depositing the excavated materials with all leads and lifts T&P shoring and shuttering if required including cost of all labour, T&P. as required for the work etc. complete as directed by the Engineer-in-charge |
| 3 | Supplying and filling foundation and plinth with sand well watered and rammed with cost, conveyance, royalities of all materials complete (Measurement to be taken on compacted section only) including cost of all labour, T&P. as required for the work etc. complete as directed by the Engineer-in-charge |
| 4 | Providing plain cement concrete (1:3:6) for concrete pavement by using 4cm size black hard crusher broken granite metal of approved quality and from approved quarry, including lowering, laying concrete, vibrating, watering curing, centering & shuttering etc. complete to required level laid in layers not exceeding 150mm thick including cost, conveyance, royalities of all materials and cost of all labour required for the work etc. complete as per direction of the Engineer-in-charge |
| 5 | Fly ash brick masonry in cement mortar (1:6) using 25x12x8 cm size bricks after immersing the bricks for six hours in water before use in Foundation and Plinth including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. complete (Crushing strength of bricks should not be less than 75kg/cm2 with dimensional tolerance ± 2%) |
| 6 | RCC M25in having compressive strength of 25mpa, target mean strength of 30mpa, for 150mm cubes at 28 days curing as per IS-456-2000 & I.R.C-21-2000 test conducted in accordance with I.S. 516 using 20mm & down graded size crusher broken hard granite coarse aggregate of approved quality and from approved quarry & other materials as per section 302 of I.R.C.21-2000 & IS-456-2000 of approved quality including centering, shuttering & form works for providing smooth & water tight surface, hoisting, lowering & laying concrete in layers not exceeding 30 cm. compacted thickness, compacting with mechanical vibrators true to lines, grades as per drawing & technical specifications, watering & curing for 28 days including cost, conveyance, royalties of all materials with all leads & lift, cost of all labour T&P, & equipment required for mixing, transporting & placing in position vibrating, compacting, finishing & curing including all incidental expenses complete in all respect as per direction of the E.I.C. but excluding the cost of M.S. roads or Tor steel and binding wire & labour charges for bending binding & tying the grills COLUMN BASE |
| 7 | PLINTH BEAM |
| 8 | LINTEL BEAM |
| 9 | COLUMN & BEAM |
| 10 | ROOF SLAB |
| 11 | Supplying, cutting, straightening the bent up M.S. Rods or Tor steel, using SAIL/TATA/RINL (grade Fe 500D) etc. including bending, binding, welding joining if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including, cost, conveyance, taxes of all M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) etc. complete as per specification & direction of Engineer-in-Charge |
| 12 | Fly ash brick masonry in cement mortar (1:6) using 25x12x8 cm size bricks after immersing the bricks for six hours in water before use in Superstructure including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. complete (Crushing strength of bricks should not be less than 75kg/cm2 with dimensional tolerance ± 2%) |
| 13 | 16mm (5/8\") thick cement plaster (1:6) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. complete as per direction of the Engineer-in-charge |
| 14 | 12mm (½\") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. complete as per direction of the Engineer-in-charge |
| 15 | 6mm thick cement plaster (1:4) over R.C.C. surface finished smooth with proper slope after chipping, chiselling and cleaning the roof slab including hoisting, watering, curing, cost, conveyance, royalities and taxes of all materials and cost of all labour, T&P. required for the work etc. complete |
| 16 | Providing , fitting & fixing Steel Angle Iron doors & windows frame with M.S grill manufactured from standard rolled steel angle section 50 mm X 50 mm X 6 mm cornered of the frame duly metered and electrically welded with fish tail hold fasts made out of M.S flats of size 200 mm X 50 mm X 30 mm wide & 5 mm thick at the rate of 4 nos per frame with M.S hinges of size 75 mm & 14 SWG thick at the rate of 3 nos for each single leaf shutter tower bolt ring & M.S Grills made out of 19 mm x 5 mm flat properly welded to the window frame with one coat of anti corrosive red oxide zinc chrome primere as per direction of Engineer - in - Charge 1% cess and 12% GST . |
| 17 | Supplying fitting, fixing steel railing pipe of 304 grade inincluding all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete as per direction of Engineer-in-charge etc. complete |
| 18 | Painting two Coats with approved Enamel paint on new wood / iron work INCLUDING COST OF MATERIL &Labour including cost of all labour, T&P. as required for the work etc. complete as directed by the Engineer-in-charge |
| 19 | Distempering two coats to inside walls including cost of all labour, T&P. as required for the work etc. complete as directed by the Engineer-in-charge |
| 20 | Finishing wall surfaces of wall with acrylic wall primer two coats over inside surface of wall including cost, conveyance of all materials, all labour, T&P. required for the work etc. complete as per direction of the Engineer-in-charge Please Enable Macros to View BoQ information |
