|
| 1 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified and directed. |
| 2 | M & L brick work sub class \"B\" bricks(OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 3 | M & L brick work sub class \"B\" bricks , (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 4 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 5 | M & L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed. |
| 6 | M & L for rendering 15mm thick in cement mortar (1:4) on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound (water proof compound paid seperatly) complete all as specified and directed. |
| 7 | M & L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 8 | M & L for preparation of new plastered surfaces of walls and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specificationincluding priming coat a primer applied @ 0.90 litre/ 10 sqm on the surface at any height incuding necessary scaffolding complete all as specified and directed.Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment at any height including necessary scaffolding certified by paint manufacturer.Make: Asian Paint Royal (10 years product warranty) or Nerolac Paint (10 years product warranty) orBerger Paint (10 years product warranty) at any height including necessary scaffolding. |
| 9 | M & L for preparation of complete removal of existing surfaces of walls and applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification at any height incuding necessary scaffolding complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment at any height including necessary scaffolding certified by paint manufacturer.Make: Asian Paint Royal (10 years product warranty) or Nerolac Paint (10 years product warranty) orBerger Paint (10 years product warranty) at any height including necessary scaffolding. |
| 10 | M & L for preparation of new plastered surfaces of ceiling and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specificationincluding priming coat a primer applied @ 0.90 litre/ 10 sqmon the surface at any height incuding necessary scaffolding complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment at any height including necessary scaffolding certified by paint manufacturer.Make: Asian Paint Royal (10 years product warranty) or Nerolac Paint (10 years product warranty) orBerger Paint (10 years product warranty) at any height including necessary scaffolding. |
| 11 | M & L for preparation of new plastered surfaces applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm at any height incuding necessary scaffolding over new/complete removal surfaces complete all as specified and directed. Note : (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/ borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paintapplication).Make: Asian Paint Ultima Protect (10 years product warranty) or Nerolac Excel Top Guard Paint (10 years product warranty) or Berger Weather Coat long life Paint (10 years product warranty) at any height including necessary scaffolding. |
| 12 | M & L for preparation of old plastered/complete removal of existing surfaces of ceiling and applying distempering two or more coats with 1st quality of arcylic distemper (ready mix) having VOC less than 50 gm/litre of approved manufacturer of required shade and colour complete all as per manufacturer\"s specification using airless spray technology with wax working pressure 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper including priming coat of exterior primer applied @0.90 litre/10 sqm at any height incuding necessary scaffolding over new/complete removal surfaces complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paintapplication.Make: Asian Paint Royal (10 years product warranty) or Nerolac Paint (10 years product warranty) orBerger Paint (10 years product warranty) at any height including necessary scaffolding. |
| 13 | M & L for preparation of painting brick, stone, concrete, asbestos cement sheet or plaster surfaces of any description over 10 cm girth or width not otherwise described and applying one coat of weather proof exterior emulsion paint (exterior grade) complete all as specified and directed.Note: The rate quoted by the tenderer is deemed to be included in the item for painting and type of bldgs for MD/OTM accn, stores, all type of fencing/ gates including any height and width shall be made good by the contractor without any extra cost to the Govt. |
| 14 | M & L for exterior or interior waterproof/weather proof cement based 1mm thick putty @ 1kg(undiluted) per sq mtr. onnew plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc by skilled labour complete all as specified and directed as per following steps :-Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. |
| 15 | Taking down shutter of any description exceeding 1 Square Metre and not exceeding 2 Square Metre each complete all as specified and directed. |
| 16 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each, removing from the site including cutting holes required fortaking out existing hold fast etc complete all as specified and directed. |
| 17 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre and not exceeding 4.0 Square Metre each , removing from the site including cutting holes required fortaking out existing hold fast etc complete all as specified and directed. |
| 18 | M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam sheet instead ofWood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 19 | S & F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam both side PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, stile & rails feathered at edges, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 20 | S & F 35mm thick Iind class hard wood glazed and skelton shutters, open rebated and prepared to recive glass, gauze etc (without sash bar), edge of framing plain, chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part-I, Section 8, Clause No 8.20(a) supplied and fitted to chowkhats complete all as specified and directed.Note: Door shutter width not exc 0.85m with single shutter each door but door shutter width exc 0.85m two panel shutter each door without any extra cost. |
| 21 | M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 22 | S & F in repair 35mm thcik IInd class hard wood glazed and skeleton window, ventilator, open rebated and prepared to receive glass, gauge etc (with necessary sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass etc are provided with stiles and rails as specified in SSR part-I, Section 8, Clause No 8.24(b) complete all as specified and directed. |
| 23 | M & L for preparing of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer complete all as specified and directed. |
| 24 | M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/walls in PCC (1:2:4) type B-0 to match the existing floors/walls complete all as specified and directed. |
| 25 | M & L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed. |
| 26 | M & L for painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces complete all as specified and directed. |
| 27 | S & F IInd class hard wood plain solid chowkhat and frame wrought framed rebatted on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed. |
| 28 | S & F stainless steelhinges 100mm long medium weightto pressed steel/angle iron frames by welding/screws complete all as specified and directed. |
| 29 | S & F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed. |
| 30 | S & F aluminium anodised barrel tower bolt 200mm size extruded section, ISI marked & fixed complete all as specified and directed. |
| 31 | S & F extruded aluminium alloy handles 150mm size fabricated type anodised ISI marked complete all as specified and directed. |
| 32 | S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp ,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 33 | Supply only 5mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed. |
| 34 | S & F in repair door seal bottom, door air gap rubber shield (best quality) anti rust, Brown/ white/black colour, black rubber complete all as specified and directed. |
| 35 | S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/laid in trenches including removing the old pipes and making good the disturbed surfaces as per existing complete all as specified and directed. |
| 36 | S & F in repair 75mm bore PVC (SWR) single junction (single \"T\") equal or unequal provided with acess door complete all as specified and directed. |
| 37 | S & F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 38 | S & F 100mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/spout pipes and making good the disturbed surfaces as per existing complete all as specified and directed. |
| 39 | S & F in repair 100mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 40 | S & F in repair 100mm bore PVC (SWR) vent cowl any radius complete all as specified and directed. |
| 41 | S & F in repair110mm bore PVC (SWR) single junction (single \"T\") equal or unequal provided with acess door complete all as specified and directed. |
| 42 | S & F in repair CI spun pipe 75mm bore fixed to wall or laid in floors complete including jointing complete all as specified and directed. |
| 43 | Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 44 | Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 45 | S & F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified and directed. |
| 46 | S & F steel tubing medium grade 20mm bore Medium grade fix to wall/floor fixed complete all as specified and directed. |
| 47 | S & F in repairs vitreous china Counter topwash basin white, flat back, size 550x400mm including fancy type half cock basin mixtre brass CP 15mm bore with long screwed shanks and fly nuts waste coupling brass CP 32mm bore, flange end bedded in red lead cement and other end fixed and PVC connection 450mm long 15mm bore with 2 Nos nuts and washes CI brackets complete all as specified and directed. |
| 48 | S & F in repairs PVC connection of 15mm bore with2 Nos. PTMT nuts, 60m long fixed with one end to pillar tap & the other end to stop cock or iron pipe complete all as specified and directed. |
| 49 | S & F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long \"D\" type fixed complete all as specified and directed. |
| 50 | S & F in repairs MS grating CP 100mm dia, with hole/without for waste pipe of approved make including fixing with cement mortar to floor/nahani traps etc complete all as specified and directed. |
| 51 | S & F in repair brass chromium plated shower rose 125mm x 125mm of size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified and directed. |
| 52 | S & F in repairs looking mirror 600x450mm bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washeres complete all as specified and directed. |
| 53 | S & F in repair15 mm fancy type bib tap cast copper alloy with crutch or butter fly handle 15mm bore chromium plated fixed complete all as specified and directed. |
| 54 | S & F in repair 15 mm fancy type angle valves, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified and directed. |
| 55 | S & F in repair 15 mm Angle Stop valves, cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unionssuitable for 15 mm bore tubes, complete all as specified and directed. |
| 56 | S & F in repair 20mm bore Stop valves, cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions fixed complete all as specified and directed. |
| 57 | S & F32/40mm dia PVC flexible waste pipe 80cm long withsocket for union, for WHB/urinal/sink complete all as specified and directed. |
| 58 | Dismantling water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified and directed. |
| 59 | S & F 500 Litre capacity Rotational moulded polyethylene water storage tanks Triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as specified and directed. |
| 60 | S & F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm dia complete all as specified and directed. |
| 61 | S & F mirror cabinet PVC frame of size 400 x 500 mm fixed to wall with rawl plug & stainless steel suitable size screwed complete all as specified and directed. |
| 62 | S & F in repairs vitreous china wash down water closet pan one pice(Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified and directed. |
| 63 | S & F in repairs vitreous china squatting pan of orrisa pattern \"long pan\" size 580mm white (ISI marked) with \"P\" & \"S\" trap , front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC (1:5:10) complete and making good to disturbed floor with PCC or cement mortar (1:3) to match with sorrounding complete all as specified and directed. |
| 64 | Demolition of cement concrete (un-renforced) in ground floor and paving n. exc 15 cm thickness(below or above ground level.) & removal of rubbish material complete all as specified and directed. |
| 65 | M & L for 25 thick cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as inlevelling coarse for tiles complete all as specified and directed. |
| 66 | M & L for double charge vitrified ceramic tiles 8mm to 9mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed. |
| 67 | M & L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed. |
| 68 | Dismentling floor, hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 69 | M & L forGranite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeincl 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 70 | M & L Glazed ceramic coloured tiles in vertical surface450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 71 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15mm thick screed bed/bedding layers in cement mortar (1:4) complete all as specified and directed. |
| 72 | M & L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed. |
| 73 | M & Lfor 100 mm thick PCC (1:4:8) type D -2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 74 | M & L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 75 | M & L for 75 mm thick PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as inplinth protection surface finished fair and even complete all as specified and directed. Note : Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. |
| 76 | Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of)etcin all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified and directed. |
| 77 | M & L for screed laid 10mm thick in cement mortar (1:4) with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 78 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 79 | M & L for roof treatment using APP based polymeric membrane minimum weighing not less than 3kg/sqm black finish reinforced with non woven polyster matt with thermo finish (wt. not less than 150 gms/sqm) laid over compatible bitumen primer @0 .30 liters per sqm and bitumen 85/25 @ 1.20 Kg per Sqm with help of torching with a proplyne or a butane gas using torch with minimum overlap of 75mm at side and 100mm at ends and sealing including applying a coat of bitumen primer & bitumen 85/25 applied hot all as per manufacturer instructuions. For parapet in a groove (No separate payment will be made and measurement will be done for horizontal surfaces) including applying a coat of heat repallant bitumen aluminium paint @ 0.1 liter per Sqm on topof treated surface of roof complete all as specified and directed. |
| 80 | M & L for providing cement concrete intype B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in roof padding,laid to(consolidated thickness 65mm or less) as leveling course, laid and compacted inmin slope 1:30 over roof complete all as specified and directed. |
| 81 | DismantlingPlain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 82 | M & L for Pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 83 | M & L for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc to store and rubbish not exc 50m complete all as specified and directed. |
| 84 | Demolition and breaking up drain pipes 150 mm dia (salt glazed ware AC or reinforcement) concrete set in cement mortar complete all as specified and directed. |
| 85 | M & L for 150 mm reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 86 | M & L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) for 150mm dia bore drain pipe for bed concrete including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 87 | Takingdown carefully copper / aluminium point wiring light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, bell push bell buzzer lamp holder bracket etc. removing from site for taking credit and making good disturbed surface of wall, floor etc complete all as specified and directed. |
| 88 | M & L for concealed point wiring complete with PVC insulated and unsheathedFRLS cable of 1.5 sqmm (nominal area) with multistranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia,with MS stove enamelled sunkenboxes (piano type or modular type as required) including earth dollywith plastic laminated sheet top cover (cover plate with frame in case of modular)of approved make and colour including 1.5 sqmm multistranded FRLS copper conductor cable of green colour as continuous earth wire with lugs, round sheet and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :-One light / fan point controlled by one way switch |
| 89 | All as per Item No 88.00 here-in-above but for one 5 Amp socket outlet on independent board complete all as specified and directed. |
| 90 | All as per Item No 88.00 here-in-above but for one 5 Amp socket outlet on same board complete all as specified and directed. |
| 91 | All as per Item No 88.00 here-in-above but for one bell/buzzer point controlled by one bell push complete all as specified and directed. |
| 92 | All as per Item No 88.00 here-in-above but for one light point controlled by two 2-way switch complete all as specified and directed. |
| 93 | All as per above Item No 88.00 here-in-above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed,FRLS cable for 15 Amp socket outleton independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed. |
| 94 | S & F socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and directed. |
| 95 | S & F socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed. |
| 96 | S & F switch 6 amps modular type one one way complete all as specified and directed. |
| 97 | S & F switch 16 amps modular type one one way complete all as specified and directed. |
| 98 | S & F modular type bell push 6 amp one module ISI Marked complete all as specified and directed. |
| 99 | S & FBell, DING DONG AC 230 Volts single pole type complete all as specified and directed. |
| 100 | S & F lamp holder balakite type with back plate suitable for batten fittings complete all as specified and directed. |
| 101 | S & F ceiling rose PVC/polycarbonate, isolated body63 x50mm three terminals complete all as specified and directed. |
| 102 | S & F in replacement of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn in and including concealed PVC conduit of suitable size as directed with and including one run of4.0 sqmm multistranded copper conductorsingle core PVC insulated, unsheathed cable of green colouras continuous earth wire including lugs etcconnected and tested complete all as specified and directed.Note: Two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and conduit shall be a unit length. |
| 103 | S & F in replacement ofsub main wiring with PVC insulated, FRLS, unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 6.0 sqmm (Nominal area) drawn in and including concealed PVC conduit of suitable size as directedwith and including one run of6.0 sqmm multistranded copper conductorsingle core PVC insulated, unsheathed cable of green colouras continuous earth wire including lugs etcconnected and tested complete all as specified and as directed.Note: Two runs of 6.0 sqmm cable and one run of 6.0sqmm cable of earth continuity conductor and conduit shall be a unit length. |
| 104 | S & F in replacement of sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 12 ways 240 V including fixing in new location with connection of circuit and submain as per site requirement complete all as specified and directed. Note: (a)MCBs are to be measured and paid seperately. (b)Make ofMCBs and DB should be same.(c) Extra circuit length where DBs are to be shifted from existing location to new location shall deemed to be included in the quoted rate. |
| 105 | S & F double door, three phase distribution board 4 way, IP 54 IK 09 loadline VTPN with 125 Amps MCCB to be used as incommer and made out of CRCA sheets 1.6mm thick, phosphatised powder coated with bus bar 250 Amp 415 V, Earth stud, Din rail, polymide terminal blocks for incomming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, with thimbled flame retardant copper conductors fixing in new or existing location with connection of circuit and submain as per site requirement complete all as specified and directed. Note: (a)Rate of MCCB and MCBs are included in the quoted rates.(b)Capcity of single pole MCB shall be provided as per requirement and direction.(c)Make ofMCBs and DB should be same. |
| 106 | S & F MCB SP 5 to 32 Amps,240 volts curve \"B\",breaking capacity 10KA,complete all as specified and directed. |
| 107 | S & F MCB SPN16 to 40 Amps,240 volts,curve \"B\", breaking capacity 10KA, compelte all as specified and directed. |
| 108 | S & F modular switch 2 way, 6 Amp,1 module ISI Marked complete all as specified and directed. |
| 109 | S & F modular Fan Regulator fan step regulator,120W- single module ISI Marked complete all as specified and directed. |
| 110 | S & F modular blanking plate, 1 module ISI Marked complete all as specified and directed. |
| 111 | S & F in repair ofEarthing to DBs with galvanised steel earth plate electrode60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead 4.0 mm galvanised iron wire by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of MES Schedule pt-I 2009, GI earth lead shall be protected by GI pipe 15 mm dia medium grade and connected to distribution board includingexcavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed. |
| 112 | M & L in repair for Earth continuity conductor or main earthing lead of 4.0 mm galvanized iron wire, buried in ground or fixed to wall in and including 15 mm bore GI pipe medium grade for protection of earth wire complete all as specified and directed. |
| 113 | S & F in replacementenviroment friendly,ultra modern,energy saving surface mounted decorative 10 Watt LED bulkhead fitting with polycarbonate housing ,high efficient LEDs with opal diffuser and IP65 protectio, lumen efficacy 85 lm/watt with colour temerature 6500K, THD≤20 CRI>80,2.5 kV surge protection all as specified and directed. |
| 114 | S & F enviroment friendly indoor decorative 20 Watt LED Aluminium Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤20 CRI>80, colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessories complete all as specified and directed. |
| 115 | S & F enviroment friendly indoor decorative 9/10 Watt LED Aluminium Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤20 CRI>80, colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessories complete all as specified and directed. |
| 116 | S & F modular type AC box 3 module operated with 20 Amps single pole MCB including 15 Amps modular socket concealed in wall complete all as specified and directed. |
| 117 | S & F decorative wall mounted with new wall comet light fitting with 9 watt LED bulb pin type B22 cap 3500 K complete all as specified and directed. |
| 118 | S & F PVCround shape junction box cover of suitable size complete all as specified and directed. |
| 119 | Taking down light fittings of any type and any size any location complete all as specified and directed. |
| 120 | Taking down DBs including old u/s MCB/MCCB of any type and any size any location complete all as specified and directed. |
| 121 | S & F plastic body ventilation exhaust fan 1250 RPM, 250mm, 50 Hz, 240 Volts with copper wound motor including all fixing accessories complete all as specified and directed. |
| 122 | M & L for shifting of existing electric energy meter from existing location to directed locations including box and connecting to existing submain circuit complete all as specified and directed. |
| 123 | S & F energy meter box flame retardent polycarbonate body including all fixing arrangments line DIN rails mounting plate connection boxes fastning screws protection plate extra suitable to accommodate single phase phase energy meter with locking arrangment complete all as specified and directed. |
| 124 | S & F 09 watt LED bulb with B22 cap, 1200 lumens, colour rating index 80, colour temp F6500K, startup time less than 2 sec, inbuilt surge 3.0 KV, voltage range 140 V to 270 VB lamp life 15000 hours complete all as specified and directed. |
| 125 | S & F enviroment friendly indoor decorative 5/6 Watt LED polycarbonate Batten with opal diffuser , operating voltage range 140 V to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤20 CRI>80, colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessories complete all as specified and directed. |
