|
| 1 | Notes:-(i) 100 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order.(ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE.(iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge.(iv) The unserviceable material obtained under the schedule of credit shall be handed over to the contractor by the Engineer-in-Charge on a proper gate pass.(v) In case of non-availability of any make mentioned under list of Makes, in such case the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated makes as approved by HQ CE SWC Jaipur and HQ CE BTZ in the works after prior approval of Accepting Officer.(vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill.(vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work.(viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. |
| 2 | Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering complete all as specified and as directed. |
| 3 | M&L Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.6 mm thickCompany Rolled of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.MAKE :- TATA DURASHINE/JSW Colouron+/JINDAL Neu Color +)Note:- Contractor Shall Submit Manufacturer Warranty certificate from manufacturer . |
| 4 | M&L Pre-painted galvalume aluminium zinc coating AZ-150 GI based Plain steel sheet 0.6 mm thickCompany Rolled of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.MAKE :- TATA DURASHINE/JSW Colouron+/JINDAL Neu Color +) Note:- Contractor Shall Submit Manufacturer Warranty certificate from manufacturer . |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 6 | Dismentling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed |
| 7 | Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articlescomplete all as specified and as directed. |
| 8 | M&L brickwork withfly ash bricks, straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking down cement or cement lime plaster wall and ceiling including in patches, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L forrendering 10 mm thick on fair faces of brick or concrete surfacesin cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 11 | M & L for preparation of newly plastered surfaces of wall & applying two coats of emulsion distemper white or coloured by Roller or Air Spray over 1 mm thick wall care putty(Multipurpose mixer shall be used for uniform and proper mixing of putty)complete all as specified and as directed by Engineer-in- charge. |
| 12 | M&L forrendering 15mm thick on fair faces of brick or concrete surfacesin cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 13 | M & L for preparation of newly plastred surfaces of wall,by Vaccume based sanding machine,and applying two coats of exterior emulsion acyrlic weatherproof antifungal paint over a coat of exterior grade primer byAuto Roller over 1 mm thick wall putty, including necessary scffoldings complte all as specified and as directed. |
| 14 | M & L providing cement concrete type B1 1:2:4(20 mm graded aggregate)as in lintels upto 1.5m clear span, copings, bed plates (block),cills, steps and other bands, parapet and railing upto 60cm height complete all as specified and directed . |
| 15 | S&F Composite cement designer ceiling board4 mm thick in ( 595 mm X 595 mm ) pannel (Make-everest ramco or eql.) designer ceiling pre finished conforming to IS 14862 type B category three incl powder coatedGI frame , grid work,hold fast,suspended with suspender along with holding down bolt complete . (Note: Ceiling board shall confirming to IS-14862 ,shall be fire resistant , Moisture resistant and ceiling shall be suspended with suspenter and adjuster .) including dismantling exisitng ceiling board complete all as specified and as directed |
| 16 | M&L for 75 mm thick PCC (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in plinth protection, finished fair and even complete all as specified and directed.Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. Cost of ceiling compund is included in the unit rate of this item |
| 17 | Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing rubbish off the premises complete all as specified and directed |
| 18 | M&L for non skid ceramic joint free coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed by Engineer-in-charge. Make :- Johnson/Kajaria/Somany or equivalent technocommercial make as specified in Appendix \"A\". |
| 19 | M&L for 7-9mm thick vitrified , coloured tiles (square / rectangular), polished, area of each tile not exceeding 0.36 sqm in floors etc, set and jointed with epoxy grout to match coloured to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) including dismantling of unsv tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-charge. Make :- Johnson/Kajaria/Somany or equivalent technocommercial make as specified in Appendix \"A\". |
| 20 | M&L for 7-9mm thick vitrified , coloured tiles (square / rectangular), polished, area of each tileexceeding 0.42 sqm but not exceeding 1.00 Sqm in floors etc, set and jointed with epoxy grout to match coloured to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) including dismantling of unsv tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-charge.Make :- Johnson/Kajaria/Somany or equivalent technocommercial make as specified in Appendix \"A\". |
| 21 | M&L for Glazed ceramic tiles in vertical surface of 600x 300x 7 mm thick on vertical surface such as dado, skirting etc, set in tile adhesive conforming to IS-15477-2019 type-2 and thickness as per manufacturer instruction of approved make complete all as specified and as directed. Make :- Johnson/Kajaria/Somany or equivalent technocommercial make as specified in Appendix \"A\". |
| 22 | M&L for Stone slab 25 mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar complete all as specified and directed by Engineer-in-charge. |
| 23 | M & L Granite (of any type) tiles 20mm thick in steps, jambs,pillers, window cill, cooking platform, etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and 15mm thick cement sand screed bed complete all as specified and as directed. |
| 24 | S&F rolled sections conforming to IS 4923 as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails , fixed with angle cleats or other connecting plates, gusset plates, etc conforming to Fe-290 (Gde E- 165), complete all as specified & directed by Engineer-in-charge. |
| 25 | S&F of 25 mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings with all connected items in walls/ceiling or laying in floors including taking up or down 20mm bore steel tubingand connections with fittings such as stop cock bib cock etc including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge |
| 26 | M&L 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint completejointed with adhesive fixed to walls/laid in trenchesfixed with and including requisite Number of bend, single T, clamps made out of flat iron 25x4mm including Dismantling exisitng drain pipe, jointed in cement mortar and taking out of trenches, if required complete etc. (measured overall as fixed along the centre line over fitting and accessories) complete all as specified.and as directed by Engineer-in-charge. |
| 27 | M&L 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint complete jointed with adhesive fixed to walls/laid in trenchesfixed with and including requisite Number of bend, single T, cross T, vent cowl, clamps made out of flat iron 25x4mm including Dismantling existing pipe and taking out of trenches, if required complete all as specified and as directed by Engineer-in-charge. |
| 28 | M&L as in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge. |
| 29 | Taking down carefully or drawn out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators, MCB, DB, lamp, earth plug etc (excluding MS sunken boxes) and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge. |
| 30 | M&L for Modular point wiring complete with 2.5 Sqmm (nominal cross section area) FRLSH PVC insulated multistranded unsheathed copper conductor cable drawn in and including concealed PVC rigid conduit medium grade 20mm dia, pipe hooks, elbows, junction covers and junction boxes including cutting chases in walls for conduits and for sunken pressed steel terminal boxes and making good the disturbed surfaces of wall with all jointing accessories including provision of pressed steel sunken terminal boxes made of 1.2mm thick pressed steel sheet, 60mm deep of suitable length and painted with red oxide primer for mounting modular switches, sockets, fan regulator including suitable size modular plates fixed flush with wall including 2.5 Sqmm PVC insulated multistranded unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light point, fan point, bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.Note : The quoted rate shall be deemed to included with modular cover plates with frame of any colour and metal flush boxes of suitable size as directed by Engr-in-Charge. |
| 31 | S&F Modular switch piano 6 Amps single pole, one way, 01 Module complete all as specified and directed by Engineer-in-charge. Make:Havells (Crabtree)/Legrand Model Myrius/Honeywell Model ORNA or equivalent in Techno commercial makes mentioned in Appendix \"A\" here-in-after |
| 32 | S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified and directed by Engineer-in-charge. |
| 33 | S&F Energy efficient decorative ultra slim, prewired, lumiline 10 watt LED light fitting (Day cool light), batten type with drive & polycarbonate housing including tube rod and all accessories prewired fixed on wall / hanging complete all as specified and as directed by Engineer-in-charge.Make : Havells Cat Part No.:- LHEXAZP7PN1W010/Crompton Cat Part CCS-103-10-65-SL-DP-NWH/Wipro Cat Part D531065 or equivalent cat part of Make as specified in Appendix \"A\". |
| 34 | S&F Energy efficient decorative ultra slim, prewired, lumiline 20 watt LED light fitting (Day cool light), batten type with drive & polycarbonate housing including tube rod and all accessories prewired fixed on wall / hanging complete all as specified and as directed by Engineer-in-charge.Make : Havells Cat Part No.:- LHEXAZP7PN1W020/Crompton Cat Part CCS-103-20-65-SL-DP-NWH/Wipro Cat Part D532065 or equivalent cat part of Make as specified in Appendix \"A\". |
| 35 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make : Havells /Crompton /Wipro or equivalent cat part of Make as specified in Appendix \"A\". |
