|
| 1 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Taking down plaster on wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed. |
| 3 | Taking down Chowkhats or frames exceeding 1.5 Sqm but n exc 4.0 Sqm each (Without taking off shutters from the frame) complete all as specified and directed. |
| 4 | Taking down Chowkhats or frames n exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed. |
| 5 | M&L for 25mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) for slab flooring, complete all as specified and directed. |
| 6 | M&L light shade ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm and n exc 0.38, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM 1:6, and pointed in coloured cement to match complete all as specified and as directed. |
| 7 | M&L for Non-skid ceramic tiles 7 to 8mm thick, joint free coloured tiles (square/rectangular) area of each tile exceeding0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6, and pointed in coloured cement to match complete all as specified and as directed. |
| 8 | M&L for glazed ceramic coloured tiles, size 450x350x7mm size as in walls, set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting/dado etc complete all as specified and as directed. |
| 9 | M&L for Rendering 15mm thick in CM 1:6 on brick work or concrete surfaces and surface is to be finished even & smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for Rendering 15mm thick in CM 1:4 on brick work or concrete surfaces and surface is to be finished even & smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for Rendering 5mm thick in cement mortar 1:3 on ceiiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 12 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and as directed. |
| 13 | M&L for Precast cement concrete block masonry with solid blocks in Type C1, 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar complete set in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L for applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat over a coat of wall putty 1 to 2mm thick on new surface of wall as recommended by manufacturer of interior emulsion complete all as specified and directed. |
| 15 | M&L for preparation of new surface of wall and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended by manufacturer complete all as specified and directed. |
| 16 | M&L for applying 03 coats of white wash on ceiling surface including preparation of surface complete all as specified and directed. |
| 17 | S&F Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, and filling of hollow portion with Plain Cement Concrete 1:3:6 type C1 (using 20mm graded stone aggregate) etc., complete all as specified and directed. |
| 18 | S&F factory made 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 19 | S&F Factory made glazed and skeleton shutters, open rebate and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 20 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. |
| 21 | S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, complete all as specified and directed. |
| 22 | S&F Factory made steel window box type using ERW hollow \"P\" section comprising double frame for and including glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. AFB /TD/A/002 dated 21 May 2023as applicable complete complete all as specified and directed.Note: (i) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs.(ii) Glazing & painting shall be measured & paid for separately. |
| 23 | S&F 300 mm long aluminium anodised sliding door bolt with hasp, staple cast type complete all as specified and as directed. |
| 24 | S&F extruded aluminium alloy handles fabricated type 150 mm size, anodized complete all as specified and directed. |
| 25 | S&F Aluminium anodized barrel tower bolt of extruded section 150 mm length complete all as specified and directed. |
| 26 | S&F 150mm stainless steel (304 grade) butt hinges complete all as specified and directed. |
| 27 | S&F plain sheet glass 4mm thick, ordinary quality and glazing with oil putty or using EPDM Gaskets in squares n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 28 | S&F Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 29 | S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white including seat cover, P trap and fixing bolt etc (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 30 | S&F in repairs Wash basins, Vitreous China (flat back or angle back type) of size 630 x 450mm, including brackets, waste fittings etc complete all as specified and as directed. |
| 31 | S&F in repairs PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr cap white with flush pipe & all fitting complete all as specified and directed. |
| 32 | S&F in repairs 15mm bore Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 33 | S&F in repairs 15mm dia bib taps with wall flange (Fancy type), cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete with check nut, complete all as specified and directed. |
| 34 | S&F in repairs PVC connection 15mm size with PTMT nut of length 600mm etc complete all as specified and directed. |
| 35 | S&F in repairs CP health faucet for 15mm dia pipe including necessary holding arrangements, screws etc complete all as specified and directed. |
| 36 | S&F in repairs 600 x 450mm bevelled edge mirror of selected quality glass 5.0/ 5.5mm thick mounted on standard PVC/Aluminium frame complete all as specified and directed. |
| 37 | S&F in repairs 15mm dia Angle cock with wall flange (Fancy type), cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete with check nut complete all as specified and directed. |
| 38 | Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 39 | S&F GI tubing 15 mm dia medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed. |
| 40 | M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 41 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 42 | Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in inner shutters complete fixed in all respect as specified including supply and fixing following items :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -2 Nos per leaf.(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf.(c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf. |
| 43 | M&L for water proofing treatment including removal of existing treatment with comprising of the following applications: -Material and labour for laying/fixing TPO membrane of nonflammable water proofing of roof which shall be a 1.5mm thick loose laid membrane using FOSROC Proofex ORG membrane or its equivalent in STP/CIPY/SIKA/Pidilite Dr Fixit, in layers overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the roll’s either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non-woven geotextile fiber. The separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG and the concrete sub structure. The termination of Fosroc Proofex ORG by aluminium strip anchoring complete all as specified and directed.Note: Work shall be executed by authorized applicator with prior experience of more than 5 years in applying similar system. |
| 44 | S&F in repairs Aluminium powder coated, Decorative, fancy type, curtain rod of size 25mm dia for complete all as specified and as directed. |
| 45 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 46 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 47 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 48 | S&F Rolled mild steel as in Purlins, Rafters, main and cross beams, Columns etc fixed with angle cleats or other connecting plates Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed. |
| 49 | S&F steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS1161-1979 grade St-240. complete all as specified and as directed. |
| 50 | M&L for 75 mm thick Plain Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/hard standing and plinth protection complete all as specified and as directed. |
| 51 | M&L for 100 mm thick Plain Cement Concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed. |
| 52 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors over 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 53 | Taking down existing unserviceable point wiring of any type/size of light/fan/socket/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area complete all as specified and directed. |
| 54 | Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified and directed. |
| 55 | Taking down existing unserviceable Distribution boards with MCB\"s/MCCB\"s of any capacity complete all as specified and directed. |
| 56 | Taking down earthing material, plate and pipe etc from 2.25 mtrs depth complete all as specified and directed. |
| 57 | M&L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC concealed conduit medium grade, ISI marked, 20 mm bore with conduit accessories for wiring concealed in wall, including provision of fabricated branded pressed steel terminal box concealed of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards/sockets/regulators of any size modules for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch.Note: (1) The wiring shall be done in proper colour coding using red, yellow, blue for phases, black for neutral and green for earth.(2) The cost ofcutting of chases of required width and depth for concealed conduit including plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor. |
| 58 | All as per Sl item No 57 above but for One ceiling fan/exhaust fan point controlled by one switch through modular regulator complete all as specified and as directed. |
| 59 | All as per Sl item No. 57 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent modular board complete all as specified and as directed. |
| 60 | All as per Sl item No. 57 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same modular board complete all as specified and as directed. |
| 61 | S&F single pole Modular switch 1 way 6 Amps, 1 Module complete all as specified and as directedNote:(i)All light/fan switches shall besymbol embossed (light/fan) typecomplete all as specified and as directed.(ii) All switches for sockets shall be LED indicator type. |
| 62 | S&F Socket modular type multipurpose 2/3 Pin, 6 amps, 230 volts 2 Module complete all as specified and directed. |
| 63 | S&F Modular ceiling fan regulator stepped socket size, 2 module suitable to work on 230 volts complete all as specified and as directed |
| 64 | S&F ceiling rose three terminal surface bakelite type AC 50 Hz, 230 volts of size 65 x 50 mm complete all as specified and as directed |
| 65 | S&F in repairs of LED batten light fitting 20 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 66 | S&F in repairs of LED batten light fitting10 Watts 2 feet surface / wall mountedaluminium extrusion input voltage range 250 V, input frequency 50Hz, including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 67 | S&F in repairs of LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant, efficacy complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 42 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in all respect complete all as specified and directed. |
| 68 | S&F ceiling fans complete with blades, downrods, 230V, 1200mm sweep five star rated with BLDC and connecting up including provision of cable from ceiling rose or connector to fan complete in all respect as specified and directed. |
| 69 | S&F PVC exhaust fans with shutter, 230V, 150mm sweep and connecting up including provision of cable from ceiling rose or connector to fan complete in all respect complete all as specified and directed. |
| 70 | S&F in repairs of MCB SP 6 to 32 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and as directed. |
| 71 | S&F in repairs of MCB SPN 40 to 63 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and as directed. |
| 72 | S&F in repairs of MCCB 415V, 16KA, 100 amps 4 Pole, thermal magnetic release fixedtype, short circuit and over load protection suitable for DB complete all as specified and as directed. |
| 73 | S&F in repairs sheet metal enclosure MCB DB SPN 8 way double door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and as directed. |
| 74 | M&L for cutting the existing road of suitable sizeincrossing and making good the disturbed surface of road to its original specification complete all as specified and directed. |
| 75 | S&F GI pipe light grade of dia 40 mm dia with all fittings laid in trenches complete all as specified and as directed. |
| 76 | Supply and laying in trenches, LT underground cable, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm, 4 core multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and directed. |
| 77 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in hard/dense soil complete all as specified and as directed. |
| 78 | Returning filling in excavated soil upto a depth of 30 cm after riddling of excavated soil (in lieu of sand) for cushioning of cable and refilling of trenches with left over normal excavated soil including spreading, leveling, watering and well ramming in layers complete all as specified and as directed. |
| 79 | Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 80 | Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 flat, size 250 mm x 150mm x 40mm complete all as specified and as directed. |
| 81 | Supply and fixing cable route indicator, made of MS sheet of size 200 mm x 150 mm x 3 mm thick,spot welded with angle iron of size 40 x 40 x 5 mm thick, 750 mm long embedded in PCC (1:2:4) type B-2 ( using 40mm graded crushed stone aggregate) block 30cm x 30cmx 40cm in ground including one coat of synthetic enamel black paint over one coat of red oxide zinc chrome primer and writing with white paint and showing size of cable HT /LT complete all as specified and directed. |
| 82 | M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified and directed (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate). Note:-(a)Earthing value should be less than 5 ohms.(b)If desired value of earth resistance not achieved during testing, the earthing work shall be redone by the contractor at free of cost to achieve the desire value of earthing resistance. The rate quoted by the contractor deemed to be inclusive of the provision. |
