|
| 1 | S & F Providing & fixing plain gypsum board false ceiling made out of 12.5mm thick paper reinforced gypsum board sheets fixed with main frame channel 80mmx 26mm x 0.5mm thick at every 450mm center to center, intermediate channel of size (15mm x 45mm x 0.9mm) at every 1220mm center to center with perimeter channel 20mm x 26mm x0.5mm all along the wall shall be provided. The frame work to be suspended with strap hangers 25mm x 0.5mm from intermediate channels using GI cleat & steel expansion fastnor at slab soffit.Arrangements are to be made to accommodate light fixtures by forming recessed channel, cutting etc wherever directed. Depression, nails & screws, jointing & finishing shall be done with jointing compound including applying two coats of oil emulsion paint over a coat of primer and one coat of putty.Note :- The rates are inclusive of scaffolding upto 7.5m height. |
| 2 | S&F 12mm thick Gypsum board as in false ceiling fixed in repairs with screwsin existing GI channelsframe work as per manufacturers instructionsincludingsuspender and two coats of oil emulsion distemper over one coat of primer on new ceiling boards,all as specified and directed. |
| 3 | S & F Pre- painted colour galvalume aluminium Zinc coating GI based corrugatedtile profilesteel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddingto wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet. |
| 4 | S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddingto wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet. |
| 5 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed. |
| 6 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed. |
| 7 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed |
| 8 | Taking down shutter of any description n.exc 1 sqm each complete all as specified & directed. |
| 9 | S&F Pressed steel frame of 105 x 60 mm x1.25 mm thick section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling complete all as directed. |
| 10 | S&F Pressed steel frame of 165 x 60mm x1.25 mm thick section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling complete all as directed. |
| 11 | S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered puttogether with glue pinned joints complete all as specified. |
| 12 | S&F 35mm thick2nd class hardwood plain framed panelled shutters(any number of panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles asper IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed |
| 13 | S&F 35mm thick 2nd class hardwoodglazed and skeletonshutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSRpart I section 8 clause 8.24 (a) complete all as specified and directed |
| 14 | S&F factory made 30 mm thick flush shutter,solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified & directed. |
| 15 | S& F Factory made 24 mm thick single extruded WPC (Wood Polymer Composite) decorative type solid Moulded Flush Door Shutter Spray Painted with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 16 | S& F Factory made single extruded WPC (Wood Polymer Composite) soliddoor/ window& other frames/ chowkhats of size 50x 75mm comprising of virginPVC polymer of K value 58-60(Suspension Grade),calcium carbonate and natural fibres (wood powder/ rice husk/ wheathusk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headedSS screwshaving minimum frame density of 750 kg/cun, screwwithdrawn strength of 2200N (face)&1100N (edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with and including MS hold fasts/ lugs/ SS dash fasteners of required dia and lengthcomplete all as perdirection of Engineer-In-Charge. |
| 17 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed |
| 18 | Taking down aluminium door and windows of any size and of any description built in wall and making good at disturbed surface with cement mortar 1:4 and applying two coats of plastic emulsion paint as per existing treatment complete all as specified & directed. |
| 19 | S&F Powder coated aluminium anodised door with frame of approved make and standard size conforming to relevant IS and shutter and glazing 5mm thick glass and 12mm thick prelaminted particle board exterior grade in bottom panel (kit ply, novapan) glass fixed with rubber gasket with aluminium galzing clips, section of aluminium door shall be of following size :- Frame ; 100 x 44 x 1.98 mm glass thickness with rawl plug.Middle lock rail ; 150 x 44 x 1.98mm thick, Bottom rail ; 150 x 44 x 1.98mm thick, Top rail/Style : 85 x 44 x 1.98mm thick, Glazing beading : 0.70 mm thick , Aluminium handle `D\" type 150mm,Aluminium tower bolt 9.9mm dia shoot 200mm long, Mortice lock - 100 mm 4 lever, aluminium stooper cleat - 02 Nos complete all as specified and directed. |
| 20 | S&F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as directed |
| 21 | S&F Butt hinges, 75mm long, medium weight, cold rolled, mild steel complete all as directed |
| 22 | S&F 150mm long aluminium anodized handle castcomplete all as directed. |
| 23 | S&F 100mm long aluminium anodized handle castcomplete all as directed. |
| 24 | S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed. |
| 25 | S&F 100mm long aluminium anodized barrel tower bolt of extruded section complete all as directed. |
| 26 | S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminiumcomplete all as directed. |
| 27 | S&F Floor door stoppers of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in repair in door,overall length of cover plate 150mm complete all as specified and directed |
| 28 | S&F in repair Stainless steel conduit pipe 15mm dia, medium weight including a pair of end bracket for cupboard for every meter length of pipe. |
| 29 | S&F in repair Chromium plated brass wall hanger of 6 peg set and fixed with screw complete all as directed. |
| 30 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed aggregate )as in sub base flooring 25 mm thick surface finished even andsmooth without using extra cement to receive the topping layer complete all as specified and directed. |
| 31 | M&L for PCC 1;4;8 type D-2, (using 40 mm graded stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed |
| 32 | M&L for Vitrified ceramic tiles light shade 10 mm thick premium quality (Ist quality) conforming to IS 13712-2006, Group B1 a (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as directed. |
| 33 | M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing andpolishing complete all as specified and directed. |
| 34 | M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thickover cement base renderinglaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with15 mm thick screed bed or bedding layer in cement mortar 1:4,including rubbing andpolishing complete all as specified and directed. |
| 35 | M&L for Cutting and grinding of existing Granite/kota/terrazo stone floor surface(2cut) on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as specified and directed by Engr-in-Charge. |
| 36 | M&L for double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair in aluminium doors complete all as specified & directed. |
| 37 | M& L forPCC 1:2:4 type B1 (using20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, coping, benching, kneelers, apex stone, bed plates, kerbs,etc.including weathering, slightly rounded or chamfered angles and throating,including necessary from work etc including demolition of existing cement concrete complete all as directed. |
| 38 | M&L 75 mm thick PCC 1;3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement uisng 38mm width PVC dividing strip,3 mm thick including demolition of existing old cement concrete,complete all as specified and directed. Note :- PVC plastic strip shall be measured and paid separately |
| 39 | Supply only38mm thick PVC dividing strip of 3mm thick |
| 40 | M&L for Granite stone of any colour(of any type) 20mm thick machine cut (table rubbed & polished), as in floors, cooking platforms and like bedded with and including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone including dismantling of existing stoneslabs including cement mortar bedding (but not backing) andrubbish off the premises complete all as directed. Shade & colour of granite stone to be approved by GE. |
| 41 | M&L for Marble work 18-20mm thick of any colour(of any type) work (table rubbed & polished) in cup board shelves and like with & including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble including dismantling of existing stoneslabs including cement mortar bedding (but not backing) andrubbish off the premises complete all as directed.Shade & colour of granite stone to be approved by GE. |
| 42 | M&L for Repairs to door and window jambs in patches not exc 1.0 sqm each patch with glazed ceremaic coloured tiles 6to7mm thick for matching shade to existing walls,as in vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including necessary rendering in cement mortar 1:4 finished including dismantling of existing damaged wall tiling duly cutting in proper shape,cleaning surface and rubbish off the premises complete all as directed |
| 43 | M&L, for Non skid ceramic coloured tiles 7 to 8mm thick of premium quality (Ist quality) (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer incement mortar 1:6, complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as directed. |
| 44 | M&L for Repairs to existing cupboard of any type to make smooth functional including inspection drawer repair by straightening the edges and sides to achieve desired shape,fixing of stainless steel telescopic channel of any description and refixing the drawers in original position complete all as specified and directed. Note:- Stainless steel channel of required size will be measured and paid separately |
| 45 | Supply only stain less steel telesopic channel of best quality fixed to drawer length 400mm to 500mm of approved makeincluding necessary repair if any complete all as directed. |
| 46 | S&F,Stainless steelcurtain rod 20mm dia of SS conduit pipe grade -304, thickness of pipe 1 mm complete. Including taking down of existing rod, complete all as specified and directed. |
| 47 | S&F,Stainless steel decorative finials and end wall bracket of approved quality for 20mm dia curtain rod , complete. Including taking down of existing finals or end brackets, complete all as specified and directed. |
| 48 | S&FStainless steel heady duty brackets of approved quality for 20mm dia curtain rod , complete. Including taking down of existing brackets, complete all as specified and directed. |
| 49 | Dismantling carefully and taken out cracked/ broken marble/kota slabs in steps, floors not exc. 0.50 sqm ecah patch includingmaterial & lobour for prepolished marble slab 20-25mm thick of any colour(of any type) matching with existing colour of marble/kota slab including 15mm thick screed bed in CM (1:4) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble, including moulding / rounding of exposed edge of slab, complete all as directed. |
| 50 | Dismantling carefully and taken out cracked/broken marble/kota as in vertical surface such as skirting not exc .50 sqm each patch including material and labour and matching with existing colour of marble/kota skirting including 15mm thick screed bed in CM(1:4) and jointed with grey cement slurry pointing with white cement(1:2),complete all as directed |
| 51 | S&F Two way chromium plated angle cock 15mm dia with wall flange fixed in repair complete of approved make all as directed |
| 52 | S&F Chromium plated Angle valve 15mm dia (angle cock) of approved make cast fixed in repaircomplete all as directed. |
| 53 | S&F 15mm dia chromium plated concealed stop cock, heavy bodyscrewed both ends for iron or for union fixed in repaircomplete all as directed |
| 54 | S&F Two way chromium plated bib cock 15mm dia with wall flange fixed in repair complete all as directed |
| 55 | S&F Chromium plated brass hot & cold basin mixer with centre hole for WHB and long shank fancy type 15mm borefixed in repaircomplete all as directed. |
| 56 | S&F Chromium plated Wall Mixer with Bend Pipe for connection to Overhead Shower (with Bush & Piston Diverter Fitting) with Aerator, connecting legs & wall flange etc 15mm bore fixed in repaircomplete all as directed. |
| 57 | S&F 15mm bore long body bib tap with wall flange fixed in repaircomplete all as directed. |
| 58 | S&F 15mm bore shortbody bib tap chromium plated with wall flange and aerator fixed in repaircomplete all as specified and directed. |
| 59 | S&F Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm fixed in repair complete all as directed. |
| 60 | S&F in RepairCP Health Faucet with 1.2 M. long flexible tubechrome braided with wall hook of approved make. |
| 61 | S&F in repair stainless steel (SS-304) Chromium platedtowel rail 600mm size fixed in repair complete all as directed. |
| 62 | S&F in repairs viterous china squatting pan orissa pattern size 580x440mm white integal foot rest & including 10 lit cap flushingcistern PVC low level & flush pipe including concrete bedding & including P trap 100mm complete |
| 63 | S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracketand PVC flush pipe fixed in repair complete all as directed. |
| 64 | S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device. |
| 65 | S&F PVC connections 15mm size with PTMT length 450mm ISI marked. |
| 66 | S&F PVC connections 15mm size with PTMT length 600mm ISI marked. |
| 67 | S&F in repair plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device. |
| 68 | Cutting marble platform for inserting/fixing oval type WHB under marble platform including grinding, polishing and taking down and refixing the WHB complete all as directed. |
| 69 | S&F Vitreous china WHB Star white oval type counter top WHB 63 x 50 cm fixed in repair complete all as directed. |
| 70 | S&F, Chromium Plated steel soap dish fixed in repaircomplete all as directed |
| 71 | S&F, Chromium Plated steel toilet paper holder fixed in repaircomplete all as directed. |
| 72 | S&F, in repair, 15 mm dia CP Brass leg any angle suitable for wall mixerincluding taking down old and refixing new on existing mixture complete all as directed. |
| 73 | S&F 100mm dia chromium plated grating with/without hole fixed in repair complete all asdirected. |
| 74 | S&F, in repair, Chromium plated waste coupling with fly nuts 32mm dia suitable forwash hand basin complete all as directed |
| 75 | S&F, in repair, Brass spindle of any type for existing bib cock, wall mixture, WHB mixture fixed in repair complete all as directed. |
| 76 | S&F Chromium plated brass knob(as per site requirement) for wash hand basin, wall mixture, bib cock and angle cock as per site requirement with nut & washer as approved fixed in repair complete all as directed. |
| 77 | S&F in repairs Looking mirror 5.50mm thick area 1.0 sqm to 2.0 Sqm bevelled edge of selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screwand cup washers and surrounded with aluminium angle including taking down existing unserviceable mirror frame complete all as specified. |
| 78 | M&L for 40mm thick PCC 1:2:4, type B1(20mm graded crushed stone aggregate) asin floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed. |
| 79 | S&F Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed. |
| 80 | S&F Ball valve 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 455 gms fixed in repair complete all as directed. |
| 81 | S&F 20mm bore gun metal globe/gate valves, withiron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed.Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco |
| 82 | S&F 25mm bore gun metal globe/gate valves, withiron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco |
| 83 | S&F 50mm bore gun metal globe/gate valves, withiron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco |
| 84 | S&F for 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, including dismantling of existing cast iron or reinforced concrete drain pipes, complete all as specified and directed |
| 85 | S&F, in repair, for Cast iron 75mm diameter of outlet floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4type B-1(using 20mm graded crushed stone aggregate) complete all as specified and directed |
| 86 | S&F, in repair, for cast iron fittings as bends, Tee, branch piece etc(any radius) 75mm pipe, diminishing pieces of tapers (large bore measured), fixed to wall or floors,complete all as specified and directed. |
| 87 | M&L, For repairs to existing floo traps in toilets, fillingall around the floor trap with cement mortar 1:2 including replacement of adjecent titesand CP grating of floor trap including taking down existing tile etc all completeas specified and as directed. |
| 88 | S&F in repairs for 5mm thick sandwitched PVCwall lining/panellingof any colour PVC sheet inclusive of PVC beads and angles at corners /edges and fixing at site with nails of approved make all as specified and directed. |
| 89 | Hacking out old broken glass pane of any thickness and size from aluminium doors and glazing pins etc and fixing of 5.0 mm thickglass fixed in aluminium door/window/partition fixed with rubber gasket and aluminium beadingcomplete all as directed |
| 90 | S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan,including hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etccomplete all as directed |
| 91 | S&F 12mm thick toughened glass frameless doors including cutting, polishing and bevelling all around and making holes for fixing of handles including removing old broken glass doors complete all as directed |
| 92 | S&F 300 mm long stainless steel handle fixed to glass door all as specified & directed. |
| 93 | S&F Pivot for glazed aluminium door as per sample including taking downexisting glazed aluminium door shutter/frame less glass door shutter n. exc 4.00 Sqm and refixing in the same position after fixing of pivot and all other repair complete all as specified and directed. |
| 94 | S&F Aluminium body door closer hydraulically regulated designation no 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kgfixed in repair complete allas directed. |
| 95 | M&L for double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified & directed. |
| 96 | S&F 18mm thick prelaminated colour WPCBoard havingbase brown, minimum density of 600 kg/cum, for Bath cabinetShutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed. |
| 97 | S&F 18mm thickWPCBoard havingbase brown, minimum density of 600 kg/cum, for bath cabinetShutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed. |
| 98 | S&F, Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed |
| 99 | S&F Magnetic catcher suitable for cup board shutter fixed with scews in bath cabinet or similar situations, complete all as specified anddirected.Make:- Hexa,Hettich,Hafele |
| 100 | S&F in repair 4 lever mild steel lock with handle & plate suitable for existing steel cup board complete all as specified & directed.Make- Godrej,Link and equivalent |
| 101 | S&F in repair stainless steel bow handle 75mm size with machine screw fixed in cup boards drawers etc all as directed. |
| 102 | Taking down carefully sliding glass door shutter from showcase of ante room, area of shutter exc 1 Sqm and n.exc 2 sqm each including showcase light & refixing in same opening after replacement of new boards in showcase including fixing of aluminium sliding track,light etc complete all as directed |
| 103 | Taking down carefully glass shelves of any size and thickness with brackets of any description from showcases and refixingin the same position after replacement of old damaged showcase including necessary bracket, screws etc,complete all as specified & directed. |
| 104 | S&F 12mm thick toughened glasscutting, polishing and bevelling all around and making holes for fixing of accessories as in cupboard shelved including removing old broken glass complete all as directed. (Note- Rate are inclusive of accessories for Toughened Glass in shelves) |
| 105 | S&F Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 106 | S&F Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or weldedcomplete all as specified and directed. |
| 107 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed |
| 108 | S&F, in repair, 500 litre capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed. |
| 109 | S&F, in repair, 1000 litre capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed. |
| 110 | S&F, in repair, 2000 litre capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed. |
| 111 | S&F, in repair, PVC lid for PVC water tank with hinging device and locking arrangement for capacity upto 2000 litre with necessary nuts, bolts and washer etc fixed in repair complete all as directed. |
| 112 | Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete as specified |
| 113 | Rendering 15mm thick cement plaster in CM 1:4 onbrick work or concrete surface (internal & external surface of manhole) finished even and smooth all as specified |
| 114 | M&L Rendering 5 mm thickusing Ready mix mortar on ceiling or concrete surface finish even and smooth without using extra cement complete all as specified and directe |
| 115 | M&L Vitrified ceramic tiles planks size 195x1200mm wooden colour(dark shade) 7-8 mm thick polished, laid in floors etc.set and jointed in tile epoxy grout to match surface of tiles including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. |
| 116 | M&L, for cutting out cracks to V-section, 15mm X 15mmon existing roofsor terracing, cleaning out, wetting etc and filled solidly with Sika cracksil or Dr Fixit 201 Crack X pasteor,Smart care crack seal of Asian paint as per manufacturers instructions, finished the roof suface properly, all complete as specified and directed. |
| 117 | M&L, for Providing cement mortar 1:4 as in plaster of20mm average thickness over concrete roof surfaces, mixed with Water proofing compound (Liquid) @ 0.20 Litre per bag of cement oras per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over old RCC roof slab before plastering including taking down existing plaster on roof complete all as specified and as directed.Note :Water proofing compound (liquid) shallbe measured and paid seperately. |
| 118 | Supply only, approved integral water proofing compound ( Liquid), ISI marked complete all as specified & directed. |
| 119 | M&L for Roof treatment through manufacturer/ authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied oil based bituminous primer over cleaned surface @ 0.50Kg/Sqm, and laid 3mm thick APP modified five layer polymeric membrane, minimum weight 3.60 Kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 Gms/Sqm) with torch application method as per manufacturer\"s instructions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces with grooves & make good in cement mortar 1:3, finally finished with bituminous aluminium paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign materials by wire brushing, cleaning roof surfaces with water and removal of spoil from defence premises, complete all as specified and directed. Note: - 1 Work shall be carried out as per manufacturer\"s instructions by authorised applicator as approved. 2. Work shall be executed upto triple stories building. 3 The work shall be carried out in stages and each stage shall be passes by Engr-in-Charge and GE.Gurantee @ 2.5% of item No 117 to 119 shall be recovered from contractor lies. |
| 120 | M&L for Granite stone ( Lakha red)(table rubbed & polished) for wall lining (veneering to wall) 12-15mm thick with and including 15 mm thick rendering in CM (1:3) and jointed with grey cement slurry, and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including dismantling of existing stoneslabs & cement mortar beddingandrubbish off the premises complete all as directed.Note : Any additional fittings such as clamps, screws required to hold the granite on vertical position deemed to be included in the rate. |
| 121 | M&L for 16 to 18mm thick “ Udaipur green” stone, as in flooring,steps, cooking platforms and like set in and including 15 mm thick screed bed in cement mortar (1:4) including pointing in colour cement 1:2 using marble dust with admixture of pigment to match with shade of stone including rounding of exposed edges of udaipur green stone and demolition of existing stoneslabs including cement mortar bedding andrubbish off the premises complete all as directed. |
| 122 | M&L for Brick work with sub class \"B\" bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 123 | M&L forBrick work with sub class \"B\" bricks (old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 124 | Taking down existing brick pattern tiles of size 200 x 58mm x15mm as in wall cladding(as in patches) and filling the surface with rendering of required thickness in cement mortar 1:4 to match the existing brick pattern tiles with necessary groove cutting including applyingtwo coat of exterior emulsion paint (weather coat) over a coat of primer to match the existing shade upto a height of 7.50 metre including all necessary scaffolding, complete all as specified and directed. |
| 125 | Taking down existing brick pattern tiles of size 200 x 58mm x15mm as in wall cladding (as in patches)and filling the surface with rendering of required thickness in cement mortar 1:4 to match the existing brick pattern tiles with necessary groove cutting including applyingtwo coats ofexterior emulsion paint (weather coat) over a coat of primer to match the of existing shade, work at height above 7.50 mtr and upto 15 metre, including all necessary scaffolding, complete all as specified and directed. |
| 126 | M&L for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 complete all as specified and directed. ( Note - Work to be carried out upto Triple storey Building & Rates are inclusive of Scaffolding) |
| 127 | S&F, Stainless steel sheet 0.50 mm thick, gde 304, in required width or girth, bent to shape for protection of membrane, fixed in staggered counter holes with SS screws and rubber/ bitumen and steel double washers all as per directions of Engr-in Charge, complete all as specified and directed. |
| 128 | Complete removal of existing treatment on wall/ceiling/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 129 | M&L forPreparation of newly plastered orscrapped surfaces of wall/ ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack sealand applying a coat of Dampstop Advanced of Berger or equivalent of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer instruction complete all as specified and directed. |
| 130 | M&L for Preparation ofwater proofing coated surface or scrappedsurfaces of wall / ceiling and applying 1.5mm thick Asian acrylic damp proof wall care putty as per manufacturer instruction complete all as specified and directed. |
| 131 | M&L for Preparation of puttyied / plastered surfaces of wall/ceiling and applying two coats of oil emulsion distemper over one coat of primer, complete all as specified and directed. |
| 132 | M&L for preparation of old plastered/un-plasteredsurfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed. |
| 133 | M&L for preparation of old plastered/un-plasteredsurfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceilingcomplete all as specified and directed. |
| 134 | M&L for Preparation of old plastered/unplastered surfaces of wall and applying onecoat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) complete all as directed. Note : The work shall be carried out upto 18m height. The rates are inclusive of scaffolding.Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape. |
| 135 | M&L for preparation of new plastered surfaces of wall and applying two coats of weather proof exterior emulsionpaint (Apex of Asian/Weather proof of Berger) all as directed.Note:- The painting work is to be carried out by mechanical means after covering the adjoing areas/window/floor by using paper/plastic and mask tape. |
| 136 | M&L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on wallscomplete all as specified and directed |
| 137 | M&L for Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shadecomplete all as specified and directed |
| 138 | M&L for preparation of old painted wooden surface of wood and wood based material over 10cm in width or girth of any description and applyingone coat of synthetic enamel paint all as specified and directed. |
| 139 | M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete. |
| 140 | M&L preparation of existing varnished wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic clear varnish complete all as specified. |
